autotools conversion
Pablo Neira Ayuso
maintainercover autotools conversion
Hi,
I found some time to work on the autotools support. Initial patches were posted by Jan dal Molin here:
http://marc.info/?l=netfilter-devel&m=140632527026257&w=2
Those were a good start to address this, but I wanted to introduce these changes incrementally by avoiding bisectability breakage between patches. Moreover, this changeset included quite a lot of changes in configure.ac among other things that this patchset avoids.
Note that doc/ and files/ were not converted yet, so those are currently disabled. Feel free to send patches to complete that or I'll finish it once I find time to work on this again.
I have pushed this to this branch:
http://git.netfilter.org/nftables/log/?h=autotools
Please, review and test. Thanks.
Pablo Neira Ayuso (5):
build: use PKG_CHECK_MODULES to check for libmnl and libnftnl
build: use AC_PROG_YACC and AM_PROG_LEX
rename parser.y to parser_bison.y
include: add cli.h
build: autotools conversion
.gitignore | 10 +-
Make_global.am | 10 ++
Makefile.am | 5 +
Makefile.defs.in | 42 ------
Makefile.in | 5 -
Makefile.rules.in | 96 --------------
configure.ac | 49 ++++---
include/cli.h | 18 +++
include/nftables.h | 14 +-
install-sh | 269 --------------------------------------
m4/.gitignore | 2 +
src/Makefile.am | 41 ++++++
src/Makefile.in | 33 -----
src/cli.c | 2 +
src/erec.c | 1 +
src/main.c | 1 +
src/{parser.y => parser_bison.y} | 3 +-
src/scanner.l | 3 +-
18 files changed, 122 insertions(+), 482 deletions(-)
create mode 100644 Make_global.am
create mode 100644 Makefile.am
delete mode 100644 Makefile.defs.in
delete mode 100644 Makefile.in
delete mode 100644 Makefile.rules.in
create mode 100644 include/cli.h
delete mode 100755 install-sh
create mode 100644 m4/.gitignore
create mode 100644 src/Makefile.am
delete mode 100644 src/Makefile.in
rename src/{parser.y => parser_bison.y} (99%)Signature · 1 line
1.7.10.4
Pablo Neira Ayuso
maintainerPATCH 1/5 build: use PKG_CHECK_MODULES to check for libmnl and libnftnl
Also check for required library versions.
--- Makefile.defs.in | 2 +- configure.ac | 7 ++----- 2 files changed, 3 insertions(+), 6 deletions(-)
Makefile.defs.in +1 -1
@@ -19,7 +19,7 @@ docdir = @docdir@ pdfdir = @pdfdir@ confdir = @sysconfdir@/nftables -LDFLAGS += @LDFLAGS@ +LDFLAGS += -lmnl -lnftnl LDFLAGS += @LIBS@ CPPFLAGS += @CPPFLAGS@
configure.ac +2 -5
@@ -62,11 +62,8 @@ then fi # Checks for libraries. -AC_CHECK_LIB([mnl], [mnl_socket_open], , - AC_MSG_ERROR([No suitable version of libmnl found])) - -AC_CHECK_LIB([nftnl], [nft_rule_alloc], , - AC_MSG_ERROR([No suitable version of libnftnl found])) +PKG_CHECK_MODULES([LIBMNL], [libmnl >= 1.0.3]) +PKG_CHECK_MODULES([LIBNFTNL], [libnftnl >= 1.0.2]) AC_CHECK_LIB([gmp], [__gmpz_init], , AC_MSG_ERROR([No suitable version of libgmp found]))
Signature · 1 line
1.7.10.4
Pablo Neira Ayuso
maintainerPATCH 2/5 build: use AC_PROG_YACC and AM_PROG_LEX
In reply to Pablo Neira AyusoTo check for bison and flex installed on the system.
--- configure.ac | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-)
configure.ac +15 -12
@@ -24,6 +24,21 @@ AC_PROG_CC AC_PROG_MKDIR_P AC_PROG_INSTALL AC_PROG_SED +AM_PROG_LEX +AC_PROG_YACC + +if test -z "$ac_cv_prog_YACC" +then + echo "*** Error: No suitable bison/yacc found. ***" + echo " Please install the 'bison' package." + exit 1 +fi +if test -z "$ac_cv_prog_LEX" +then + echo "*** Error: No suitable flex/lex found. ***" + echo " Please install the 'flex' package." + exit 1 +fi AC_CHECK_PROG(CONFIG_MAN1, [docbook2x-man], [y], [n]) if test "$CONFIG_MAN1" == "y"
@@ -49,18 +64,6 @@ then AC_MSG_WARN([dblatex not found, no PDF manpages will be built]) fi -AC_PATH_PROG(LEX, [flex]) -if test -z "$LEX" -then - AC_MSG_ERROR([No suitable version of flex found]) -fi - -AC_PATH_PROG(YACC, [bison]) -if test -z "$YACC" -then - AC_MSG_ERROR([No suitable version of bison found]) -fi - # Checks for libraries. PKG_CHECK_MODULES([LIBMNL], [libmnl >= 1.0.3]) PKG_CHECK_MODULES([LIBNFTNL], [libnftnl >= 1.0.2])
Signature · 1 line
1.7.10.4
Pablo Neira Ayuso
maintainerPATCH 3/5 rename parser.y to parser_bison.y
In reply to Pablo Neira AyusoThe conversion to the autotools need this.
Make sure you remove the autogenerated parser.c and parser.h from your tree.
---
src/Makefile.in | 4 ++--
src/{parser.y => parser_bison.y} | 2 +-
src/scanner.l | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
rename src/{parser.y => parser_bison.y} (99%)src/Makefile.in +2 -2
@@ -26,8 +26,8 @@ nft-obj += utils.o nft-obj += erec.o nft-obj += mnl.o -nft-obj += parser.o -nft-extra-clean-files += parser.c parser.h +nft-obj += parser_bison.o +nft-extra-clean-files += parser_bison.c parser_bison.h nft-obj += scanner.o nft-extra-clean-files += scanner.c scanner.h
src/parser_bison.y renamed from src/parser.y +1 -1
@@ -32,7 +32,7 @@ #include <parser.h> #include <erec.h> -#include "parser.h" +#include "parser_bison.h" #include "scanner.h" void parser_init(struct parser_state *state, struct list_head *msgs)
src/scanner.l +1 -1
@@ -20,7 +20,7 @@ #include <erec.h> #include <rule.h> #include <parser.h> -#include "parser.h" +#include "parser_bison.h" #define YY_NO_INPUT
Signature · 1 line
1.7.10.4
Pablo Neira Ayuso
maintainerPATCH 4/5 include: add cli.h
In reply to Pablo Neira AyusoNeeded by follow up patches to use autotools.
--- include/cli.h | 18 ++++++++++++++++++ include/nftables.h | 14 ++------------ src/cli.c | 1 + src/main.c | 1 + 4 files changed, 22 insertions(+), 12 deletions(-) create mode 100644 include/cli.h
include/cli.h new file +18 -0
@@ -0,0 +1,18 @@ +#ifndef _NFT_CLI_H_ +#define _NFT_CLI_H_ + +#include <config.h> + +struct parser_state ; +#ifdef HAVE_LIBREADLINE +extern int cli_init (struct parser_state *state); +#else +static inline int cli_init (struct parser_state *state) +{ +return -1 ; +} +#endif +extern void cli_exit (void ); +extern void cli_display(const char *fmt, va_list ap) __fmtstring(1, 0); + +#endif
include/nftables.h +2 -12
@@ -31,18 +31,6 @@ extern unsigned int handle_output;extern unsigned int debug_level;extern const char *include_paths[INCLUDE_PATHS_MAX ]; -struct parser_state ; -#ifdef HAVE_LIBREADLINE -extern int cli_init (struct parser_state *state); -#else -static inline int cli_init (struct parser_state *state) -{ -return -1 ; -} -#endif -extern void cli_exit (void ); -extern void cli_display(const char *fmt, va_list ap) __fmtstring(1, 0); -enum nftables_exit_codes {NFT_EXIT_SUCCESS =0 ,NFT_EXIT_FAILURE =1 ,
@@ -116,6 +104,8 @@ struct input_descriptor { off_t line_offset; }; +struct parser_state ; +int nft_run (void *scanner,struct parser_state *state,struct list_head *msgs);#endif /* NFTABLES_NFTABLES_H */
src/cli.c +1 -0
@@ -27,6 +27,7 @@#include <parser.h> #include <erec.h> #include <utils.h> +#include <cli.h> #define CMDLINE_HISTFILE ".nft.history"
src/main.c +1 -0
@@ -25,6 +25,7 @@#include <netlink.h> #include <erec.h> #include <mnl.h> +#include <cli.h> unsigned int max_errors =10 ;unsigned int numeric_output;
Signature · 1 line
1.7.10.4
Pablo Neira Ayuso
maintainerPATCH 5/5 build: autotools conversion
In reply to Pablo Neira Ayuso1) This removes former Makefiles and install-sh (which is now automagically imported via autoreconf).
Makefile.defs.in
Makefile.in
Makefile.rules.in
src/Makefile.in
install-sh (now automagically imported via autoreconf).
2) CFLAGS are left the same, they are integrated into Make_global.am.
3) Add m4 directory to the tree which only contains the .gitignore file.
4) include <config.h> whenever required.
5) Minor adjustments to scanner.l and parser_bison.y to compile cleanly with autotools.
The doc/ and files/ conversion to automake will come in follow up patches.
--- .gitignore | 10 +- Make_global.am | 10 ++ Makefile.am | 5 + Makefile.defs.in | 42 -------- Makefile.in | 5 - Makefile.rules.in | 96 ------------------- configure.ac | 15 ++- install-sh | 269 ---------------------------------------------------- m4/.gitignore | 2 + src/Makefile.am | 41 ++++++++ src/Makefile.in | 33 ------- src/cli.c | 1 + src/erec.c | 1 + src/parser_bison.y | 1 - src/scanner.l | 1 + 15 files changed, 81 insertions(+), 451 deletions(-) create mode 100644 Make_global.am create mode 100644 Makefile.am delete mode 100644 Makefile.defs.in delete mode 100644 Makefile.in delete mode 100644 Makefile.rules.in delete mode 100755 install-sh create mode 100644 m4/.gitignore create mode 100644 src/Makefile.am delete mode 100644 src/Makefile.in
.gitignore +7 -3
@@ -2,10 +2,13 @@ .*.d *.o -# Generated by autoconf/configure +# Generated by autoconf/configure/automake +*.m4 Makefile -Makefile.defs -Makefile.rules +Makefile.in +src/Makefile.in +src/.deps/ +stamp-h1 config.h config.h.in config.h.in~
@@ -13,6 +16,7 @@ config.log config.status configure autom4te.cache +build-aux/ # Debian package build temporary files build-stamp
Make_global.am new file +10 -0
@@ -0,0 +1,10 @@ +AM_CPPFLAGS = -I$(top_srcdir)/include +AM_CPPFLAGS += -DDEFAULT_INCLUDE_PATH="\"${sysconfdir}\"" -D__USE_GNU + +AM_CFLAGS = -Wall \ + -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations \ + -Wdeclaration-after-statement -Wsign-compare -Winit-self \ + -Wformat-nonliteral -Wformat-security -Wmissing-format-attribute \ + -Wcast-align -Wundef -Wbad-function-cast # -Wshadow \ + -Waggregate-return -Wunused -Wwrite-strings \ + ${LIBMNL_CFLAGS} ${LIBNFTNL_CFLAGS}
Makefile.am new file +5 -0
@@ -0,0 +1,5 @@ +include Make_global.am + +ACLOCAL_AMFLAGS = -I m4 + +SUBDIRS = src
Makefile.defs.in deleted +0 -42
42 lines not on this page · raw message
Makefile.in deleted +0 -5
@@ -1,5 +0,0 @@ -SUBDIRS += src -SUBDIRS += files -SUBDIRS += doc - -include Makefile.rules
Makefile.rules.in deleted +0 -96
96 lines not on this page · raw message
configure.ac +13 -2
@@ -7,6 +7,15 @@ AC_COPYRIGHT([Copyright (c) 2008 Patrick McHardy <[email protected]>]) AC_INIT([nftables], [0.3], [[email protected]]) AC_DEFINE([RELEASE_NAME], ["Support Edward Snowden"], [Release name]) +AC_CONFIG_AUX_DIR([build-aux]) +AC_CANONICAL_HOST +AC_CONFIG_MACRO_DIR([m4]) +AM_INIT_AUTOMAKE([-Wall foreign subdir-objects + tar-pax no-dist-gzip dist-bzip2 1.6]) + +dnl kernel style compile messages +m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) + AC_CONFIG_SRCDIR([src/rule.c]) AC_CONFIG_HEADER([config.h])
@@ -77,8 +86,10 @@ AC_ARG_WITH([cli], [AS_HELP_STRING([--without-cli], AS_IF([test "x$with_cli" != xno], [ AC_CHECK_LIB([readline], [readline], , AC_MSG_ERROR([No suitable version of libreadline found])) +AC_DEFINE([HAVE_LIBREADLINE], [1], []) ]) AC_SUBST(with_cli) +AM_CONDITIONAL([BUILD_CLI], [test "x$with_cli" != xno]) # Checks for header files. AC_HEADER_STDC
@@ -108,6 +119,6 @@ AC_TYPE_UINT64_T # Checks for library functions. AC_CHECK_FUNCS([memmove memset strchr strdup strerror strtoull]) -AC_CONFIG_FILES([Makefile Makefile.defs Makefile.rules]) -AC_CONFIG_FILES([src/Makefile doc/Makefile files/Makefile]) +AC_CONFIG_FILES([Makefile]) +AC_CONFIG_FILES([src/Makefile]) AC_OUTPUT
install-sh deleted +0 -269
269 lines not on this page · raw message
m4/.gitignore new file +2 -0
@@ -0,0 +1,2 @@ +* +!.gitignore
src/Makefile.am new file +41 -0
41 lines not on this page · raw message
src/Makefile.in deleted +0 -33
@@ -1,33 +0,0 @@ -PROGRAMS += nft - -nft-destdir := @sbindir@ - -nft-obj += main.o -ifeq (@with_cli@,yes) -nft-obj += cli.o -endif -nft-obj += rule.o -nft-obj += statement.o -nft-obj += datatype.o -nft-obj += expression.o -nft-obj += evaluate.o -nft-obj += proto.o -nft-obj += payload.o -nft-obj += exthdr.o -nft-obj += meta.o -nft-obj += ct.o -nft-obj += netlink.o -nft-obj += netlink_linearize.o -nft-obj += netlink_delinearize.o -nft-obj += segtree.o -nft-obj += rbtree.o -nft-obj += gmputil.o -nft-obj += utils.o -nft-obj += erec.o -nft-obj += mnl.o - -nft-obj += parser_bison.o -nft-extra-clean-files += parser_bison.c parser_bison.h - -nft-obj += scanner.o -nft-extra-clean-files += scanner.c scanner.h
src/cli.c +1 -0
@@ -12,6 +12,7 @@* Development of this code funded by Astaro AG (http://www.astaro.com/) */ +#include <config.h> #include <stdlib.h> #include <stdio.h> #include <stdarg.h>
src/erec.c +1 -0
@@ -8,6 +8,7 @@* Development of this code funded by Astaro AG (http://www.astaro.com/) */ +#include <config.h> #include <stdio.h> #include <string.h> #include <stdarg.h>
src/parser_bison.y +0 -1
@@ -33,7 +33,6 @@ #include <erec.h> #include "parser_bison.h" -#include "scanner.h" void parser_init(struct parser_state *state, struct list_head *msgs) {
src/scanner.l +1 -0
@@ -169,6 +169,7 @@ ip6addr ({v680}|{v67}|{v66}|{v65}|{v64}|{v63}|{v62}|{v61}|{v60}) addrstring ({macaddr}|{ip4addr}|{ip6addr}) %option prefix="nft_" +%option outfile="lex.yy.c" %option reentrant %option noyywrap %option nounput
Signature · 1 line
1.7.10.4
Re: [PATCH nft 5/5] build: autotools conversion
Quoted 1 line · Pablo Neira Ayuso
+AM_CPPFLAGS += -DDEFAULT_INCLUDE_PATH="\"${sysconfdir}\"" -D__USE_GNU
feature_test_macros(7) specifies _GNU_SOURCE rather than __USE_GNU.
Make_global.am line 10
Quoted 7 lines
Make_global.am new file +7
-0+AM_CFLAGS = -Wall \ + -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations \ + -Wdeclaration-after-statement -Wsign-compare -Winit-self \ + -Wformat-nonliteral -Wformat-security -Wmissing-format-attribute \ + -Wcast-align -Wundef -Wbad-function-cast # -Wshadow \ + -Waggregate-return -Wunused -Wwrite-strings \ + ${LIBMNL_CFLAGS} ${LIBNFTNL_CFLAGS}
You have a # in there, which causes the remaining -W and -I from LIBMNL_CFLAGS to be absent from the compilation line.
LIBMNL_CFLAGS and LIBNFTNL_CFLAGS should be in AM_CPPFLAGS because they are, well, cppflags. (It's a pkgconfig "bug"). This was properly done in the original autotools submissions.
m4/.gitignore line 2
Quoted 5 lines
m4/.gitignore new file +2
-0@@ -0,0 +1,2 @@ +* +!.gitignore
The last entry is not needed, because .gitignore would already be unignored because it is tracked.
/lt*.m4
/libtool.m4
as in the original submission would ensure that no more files are ignored than absolutely necessary, so as to be aware of potential additional files popping up.
Quoted 10 lines
src/scanner.l +0
-0@@ -169,6 +169,7 @@ ip6addr ({v680}|{v67}|{v66}|{v65}|{v64}|{v63}|{v62}|{v61}|{v60}) addrstring ({macaddr}|{ip4addr}|{ip6addr})%option prefix="nft_"
+%option outfile="lex.yy.c"
%option reentrant
%option noyywrap
%option nounput
Why is this needed? The default output filename is already lex.yy.c (and ylwrap will rename it anyway).
Re: [PATCH nft 5/5] build: autotools conversion
In reply to Pablo Neira AyusoQuoted 6 lines · Pablo Neira Ayuso
Make_global.am new file +0
-0
Make_global.am line 10
Quoted 10 lines
Make_global.am new file +10
-0@@ -0,0 +1,10 @@ +AM_CPPFLAGS = -I$(top_srcdir)/include +AM_CPPFLAGS += -DDEFAULT_INCLUDE_PATH="\"${sysconfdir}\"" -D__USE_GNU + +AM_CFLAGS = -Wall \ + -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations \ + -Wdeclaration-after-statement -Wsign-compare -Winit-self \ + -Wformat-nonliteral -Wformat-security -Wmissing-format-attribute \ + -Wcast-align -Wundef -Wbad-function-cast # -Wshadow \ + -Waggregate-return -Wunused -Wwrite-strings \ + ${LIBMNL_CFLAGS} ${LIBNFTNL_CFLAGS}
why do you need this new file? The #include in the main Makefile.am is useless because you do not build anything there; the only right place to have these definitions is under src/Makefile.am.
giorgio
PATCH 1/1 autotools conversion fixups
In reply to Pablo Neira AyusoFrom: root <root@lord_casco.spaceball>
Add some missing Makefile.am's under the include directory.
Now it is possible to build 'nftables' from a separate build directory and produce a release tar archive with a 'make distcheck'.
--- Make_global.am | 10 ---------- Makefile.am | 5 ++--- autogen.sh | 9 ++++++++- configure.ac | 9 +++++++-- include/Makefile.am | 22 ++++++++++++++++++++++ include/linux/Makefile.am | 7 +++++++ include/linux/netfilter/Makefile.am | 5 +++++ src/Makefile.am | 14 ++++++++++++-- 8 files changed, 63 insertions(+), 18 deletions(-) delete mode 100644 Make_global.am create mode 100644 include/Makefile.am create mode 100644 include/linux/Makefile.am create mode 100644 include/linux/netfilter/Makefile.am
Make_global.am deleted +0 -10
@@ -1,10 +0,0 @@ -AM_CPPFLAGS = -I$(top_srcdir)/include -AM_CPPFLAGS += -DDEFAULT_INCLUDE_PATH="\"${sysconfdir}\"" - ${LIBMNL_CFLAGS} ${LIBNFTNL_CFLAGS} - -AM_CFLAGS = -Wall \ - -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations \ - -Wdeclaration-after-statement -Wsign-compare -Winit-self \ - -Wformat-nonliteral -Wformat-security -Wmissing-format-attribute \ - -Wcast-align -Wundef -Wbad-function-cast - -Waggregate-return -Wunused -Wwrite-strings
Makefile.am +2 -3
@@ -1,5 +1,4 @@ -include Make_global.am - ACLOCAL_AMFLAGS = -I m4 -SUBDIRS = src +SUBDIRS = src \ + include
autogen.sh +8 -1
@@ -1,4 +1,11 @@ #!/bin/bash -autoreconf -fi; +srcdir=`dirname $0` +test -z "$srcdir" && srcdir=. + +ORIGDIR=`pwd` +cd $srcdir + +autoreconf -vfi || exit 1 rm -Rf autom4te*.cache config.h.in~ +cd $ORIGDIR || exit $?
configure.ac +7 -2
@@ -119,6 +119,11 @@ AC_TYPE_UINT64_T # Checks for library functions. AC_CHECK_FUNCS([memmove memset strchr strdup strerror strtoull]) -AC_CONFIG_FILES([Makefile]) -AC_CONFIG_FILES([src/Makefile]) +AC_CONFIG_FILES([ \ + Makefile \ + src/Makefile \ + include/Makefile \ + include/linux/Makefile \ + include/linux/netfilter/Makefile \ + ]) AC_OUTPUT
include/Makefile.am new file +22 -0
@@ -0,0 +1,22 @@ +SUBDIRS = linux + +noinst_HEADERS = cli.h \ + datatype.h \ + expression.h \ + gmputil.h \ + mnl.h \ + nftables.h \ + payload.h \ + rbtree.h \ + statement.h \ + ct.h \ + erec.h \ + exthdr.h \ + headers.h \ + list.h \ + meta.h \ + netlink.h \ + parser.h \ + proto.h \ + rule.h \ + utils.h
include/linux/Makefile.am new file +7 -0
@@ -0,0 +1,7 @@ +SUBDIRS = netfilter +noinst_HEADERS = netfilter_arp.h \ + netfilter_bridge.h \ + netfilter_decnet.h \ + netfilter.h \ + netfilter_ipv4.h \ + netfilter_ipv6.h
include/linux/netfilter/Makefile.am new file +5 -0
@@ -0,0 +1,5 @@ +noinst_HEADERS = nf_conntrack_common.h \ + nf_conntrack_tuple_common.h \ + nf_nat.h \ + nf_tables.h \ + nfnetlink.h
src/Makefile.am +12 -2
@@ -1,9 +1,19 @@ -include $(top_srcdir)/Make_global.am - sbin_PROGRAMS = nft CLEANFILES = scanner.c parser_bison.c +AM_CPPFLAGS = -I$(top_srcdir)/include +AM_CPPFLAGS += -DDEFAULT_INCLUDE_PATH="\"${sysconfdir}\"" + ${LIBMNL_CFLAGS} ${LIBNFTNL_CFLAGS} + +AM_CFLAGS = -Wall \ + -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations \ + -Wdeclaration-after-statement -Wsign-compare -Winit-self \ + -Wformat-nonliteral -Wformat-security -Wmissing-format-attribute \ + -Wcast-align -Wundef -Wbad-function-cast + -Waggregate-return -Wunused -Wwrite-strings + + AM_YFLAGS = -d # yacc and lex generate dirty code
Signature · 1 line
2.1.3
Pablo Neira Ayuso
maintainerRe: [PATCH 1/1] autotools conversion fixups
Quoted 6 lines · On Sun, Nov 09, 2014 at 09:26:12PM +0100, [email protected] wrote:
From: root <root@lord_casco.spaceball>
Add some missing Makefile.am's under the include directory.
Now it is possible to build 'nftables' from a separate build directory and produce a release tar archive with a 'make distcheck'.
Thanks. I have merged this update to nftables/autotools branch:
git.netfilter.org/nftables/commit/?h=autotools&id=85035b6c6a1618e7ba726fe6306c804fc1b6c4e8
Quoted 7 lines
autogen.sh +0
-0@@ -1,4 +1,11 @@ #!/bin/bash
autogen.sh line 11
Quoted 10 lines
autogen.sh +8
-1-autoreconf -fi; +srcdir=`dirname $0` +test -z "$srcdir" && srcdir=. + +ORIGDIR=`pwd` +cd $srcdir + +autoreconf -vfi || exit 1 rm -Rf autom4te*.cache config.h.in~ +cd $ORIGDIR || exit $?
The need for this chunk was not justified, I kept this back.