SMBUS: Add DeviceIDs for SunrisePoint LP
Subsystems (3)
PATCH 1/3 SMBUS: Add DeviceIDs for SunrisePoint LP
Quoted 1 line
From
8386c61977dce52fcdfe7fb279692606f47650bcMon Sep 17 00:00:00 2001
From: Devin Ryles <[email protected]>
Date: Wed, 5 Nov 2014 16:30:03 -0500
Subject: [PATCH 1/3] SMBUS: Add DeviceIDs for SunrisePoint LP
This patch adds the DeviceIDs for SunrisePoint LP
--- Documentation/i2c/busses/i2c-i801 | 1 + drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-i801.c | 3 +++ 3 files changed, 5 insertions(+)
(quoted diff) +0 -0
b/Documentation/i2c/busses/i2c-i801
index 793c83d..82f48f7 100644
Documentation/i2c/busses/i2c-i801 +1 -0
@@ -29,6 +29,7 @@ Supported adapters: * Intel Wildcat Point-LP (PCH) * Intel BayTrail (SOC) * Intel Sunrise Point-H (PCH) + * Intel Sunrise Point-LP (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus
controller
drivers/i2c/busses/Kconfig +1 -0
@@ -123,6 +123,7 @@ config I2C_I801 Wildcat Point-LP (PCH) BayTrail (SOC) Sunrise Point-H (PCH) + Sunrise Point-LP (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801.
(quoted diff) +0 -0
b/drivers/i2c/busses/i2c-i801.c
index 7cfc183..e158e18 100644
drivers/i2c/busses/i2c-i801.c +2 -0
@@ -63,6 +63,7 @@* Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes * BayTrail (SOC) 0x0f12 32 hard yes yes yes * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes +* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes * * Features supported by this driver: * Software PEC no
@@ -186,6 +187,7 @@#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 +#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23struct i801_mux_config {char *gpio_chip;
@@ -833,6 +835,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL,PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
{ 0, }
};
Signature · 1 line
1.9.3
Hi Devin,
Quoted 69 lines · Devin Ryles
From
8386c61977dce52fcdfe7fb279692606f47650bcMon Sep 17 00:00:00 2001
From: Devin Ryles <[email protected]>
Date: Wed, 5 Nov 2014 16:30:03 -0500
Subject: [PATCH 1/3] SMBUS: Add DeviceIDs for SunrisePoint LPThis patch adds the DeviceIDs for SunrisePoint LP
Signed-off-by Devin Ryles <[email protected]>--- Documentation/i2c/busses/i2c-i801 | 1 + drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-i801.c | 3 +++ 3 files changed, 5 insertions(+)Documentation/i2c/busses/i2c-i801 +1
-0@@ -29,6 +29,7 @@ Supported adapters: * Intel Wildcat Point-LP (PCH) * Intel BayTrail (SOC) * Intel Sunrise Point-H (PCH) + * Intel Sunrise Point-LP (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBuscontroller
drivers/i2c/busses/Kconfig +1
-0@@ -123,6 +123,7 @@ config I2C_I801 Wildcat Point-LP (PCH) BayTrail (SOC) Sunrise Point-H (PCH) + Sunrise Point-LP (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801.drivers/i2c/busses/i2c-i801.c +3
-0@@ -63,6 +63,7 @@* Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes * BayTrail (SOC) 0x0f12 32 hard yes yes yes * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes +* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes * * Features supported by this driver: * Software PEC no @@ -186,6 +187,7 @@#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 +#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23struct i801_mux_config {char *gpio_chip;@@ -833,6 +835,7 @@ static const struct pci_device_id i801_ids[] = { {PCI_DEVICE (PCI_VENDOR_ID_INTEL , PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
Quoted 4 lines
PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
{ 0, }
};
This looks good, however your e-mail client wrapped long lines so the patch can't be applied. Please reconfigure your client to not do that and send the patches again. In Evolution, you can select the entire contents of the patch and set the formatting to "Pre-formatted", that should work. See Documentation/email-clients.txt for more details. If you're not sure, try sending the message to yourself once first to make sure the formatting is good.
Thanks,
Signature · 2 lines
Jean Delvare SUSE L3 Support
PATCH 1/1 SMBUS: Add DeviceIDs for SunrisePoint LP
Quoted 1 line
From
8386c61977dce52fcdfe7fb279692606f47650bcMon Sep 17 00:00:00 2001
From: Devin Ryles <[email protected]>
Date: Wed, 5 Nov 2014 16:30:03 -0500
Subject: [PATCH] SMBUS: Add DeviceIDs for SunrisePoint LP
This patch adds the DeviceIDs for SunrisePoint LP
--- Documentation/i2c/busses/i2c-i801 | 1 + drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-i801.c | 3 +++ 3 files changed, 5 insertions(+)
Documentation/i2c/busses/i2c-i801 +1 -0
@@ -29,6 +29,7 @@ Supported adapters: * Intel Wildcat Point-LP (PCH) * Intel BayTrail (SOC) * Intel Sunrise Point-H (PCH) + * Intel Sunrise Point-LP (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller
drivers/i2c/busses/Kconfig +1 -0
@@ -123,6 +123,7 @@ config I2C_I801 Wildcat Point-LP (PCH) BayTrail (SOC) Sunrise Point-H (PCH) + Sunrise Point-LP (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801.
drivers/i2c/busses/i2c-i801.c +3 -0
@@ -63,6 +63,7 @@* Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes * BayTrail (SOC) 0x0f12 32 hard yes yes yes * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes +* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes * * Features supported by this driver: * Software PEC no
@@ -186,6 +187,7 @@#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 +#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23struct i801_mux_config {char *gpio_chip;
@@ -833,6 +835,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) }, { 0, } };
Signature · 1 line
1.9.3
Quoted 59 lines · Devin Ryles
From
8386c61977dce52fcdfe7fb279692606f47650bcMon Sep 17 00:00:00 2001
From: Devin Ryles <[email protected]>
Date: Wed, 5 Nov 2014 16:30:03 -0500
Subject: [PATCH] SMBUS: Add DeviceIDs for SunrisePoint LPThis patch adds the DeviceIDs for SunrisePoint LP
Signed-off-by Devin Ryles <[email protected]>--- Documentation/i2c/busses/i2c-i801 | 1 + drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-i801.c | 3 +++ 3 files changed, 5 insertions(+)Documentation/i2c/busses/i2c-i801 +1
-0@@ -29,6 +29,7 @@ Supported adapters: * Intel Wildcat Point-LP (PCH) * Intel BayTrail (SOC) * Intel Sunrise Point-H (PCH) + * Intel Sunrise Point-LP (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controllerdrivers/i2c/busses/Kconfig +1
-0@@ -123,6 +123,7 @@ config I2C_I801 Wildcat Point-LP (PCH) BayTrail (SOC) Sunrise Point-H (PCH) + Sunrise Point-LP (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801.drivers/i2c/busses/i2c-i801.c +2
-0@@ -63,6 +63,7 @@* Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes * BayTrail (SOC) 0x0f12 32 hard yes yes yes * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes +* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes * * Features supported by this driver: * Software PEC no @@ -186,6 +187,7 @@#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 +#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23struct i801_mux_config {char *gpio_chip;
drivers/i2c/busses/i2c-i801.c static const struct pci_device_id i801_ids[] = { · line 841
Quoted 7 lines
drivers/i2c/busses/i2c-i801.c +1
-0@@ -833,6 +835,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) }, { 0, } };
Thanks,
Signature · 2 lines
Jean Delvare SUSE L3 Support
Wolfram Sang
AppliedQuoted 8 lines · Devin Ryles
From
8386c61977dce52fcdfe7fb279692606f47650bcMon Sep 17 00:00:00 2001
From: Devin Ryles <[email protected]>
Date: Wed, 5 Nov 2014 16:30:03 -0500
Subject: [PATCH] SMBUS: Add DeviceIDs for SunrisePoint LPThis patch adds the DeviceIDs for SunrisePoint LP
Signed-off-by Devin Ryles <[email protected]>
Applied to for-next, thanks!