Skip to contentSkip to conversation

ARM: mvebu: add MTD_BLOCK to mvebu_v7_defconfig

PATCH New Thomas Petazzoni 3 participants 3 messages Nov 13, 2014 – Nov 22, 2014

Subsystems (2)
Arm (32-bit) Arm/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SoC support
lore
Share & tools
lore

Thomas Petazzoni

author
#0 lore raw

PATCH 1/1 ARM: mvebu: add MTD_BLOCK to mvebu_v7_defconfig

Since many (most?) mvebu platforms have NAND or SPI flashes, it makes sense to have CONFIG_MTD_BLOCK=y in mvebu_v7_defconfig. The vast majority of the other ARM defconfigs have it enabled, including mvebu_v5_defconfig.

Signed-off-by Thomas Petazzoni <[email protected]>

---
Patch based on mvebu/defconfig

Signed-off-by Thomas Petazzoni <[email protected]>
---
 arch/arm/configs/mvebu_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/mvebu_v7_defconfig +1 -0
index 9ca7e78..802c3c6 100644
@@ -45,6 +45,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
Signature · 1 line
2.0.0
maintainer
#1 lore raw

PATCH 1/1 ARM: mvebu: add MTD_BLOCK to mvebu_v7_defconfig

Quoted 10 lines · Thomas Petazzoni

Since many (most?) mvebu platforms have NAND or SPI flashes, it makes sense to have CONFIG_MTD_BLOCK=y in mvebu_v7_defconfig. The vast majority of the other ARM defconfigs have it enabled, including mvebu_v5_defconfig.

Signed-off-by Thomas Petazzoni <[email protected]>

---
Patch based on mvebu/defconfig

Signed-off-by Thomas Petazzoni <[email protected]>
Acked-by Andrew Lunn <[email protected]>

Andrew

Quoted 19 lines
---
 arch/arm/configs/mvebu_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/mvebu_v7_defconfig +1 -0
index 9ca7e78..802c3c6 100644
@@ -45,6 +45,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
Signature · 1 line
2.0.0
Applied
#2 lore raw

PATCH 1/1 ARM: mvebu: add MTD_BLOCK to mvebu_v7_defconfig

In reply to Thomas Petazzoni
Quoted 5 lines · Thomas Petazzoni

Since many (most?) mvebu platforms have NAND or SPI flashes, it makes sense to have CONFIG_MTD_BLOCK=y in mvebu_v7_defconfig. The vast majority of the other ARM defconfigs have it enabled, including mvebu_v5_defconfig.

Quoted 8 lines
Signed-off-by Thomas Petazzoni <[email protected]>

---
Patch based on mvebu/defconfig

Signed-off-by Thomas Petazzoni <[email protected]>
---
 arch/arm/configs/mvebu_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

Applied to mvebu/defconfig with Andrew's Ack.

thx,

Jason.