Skip to contentSkip to conversation

icecc

DISCUSSION Peter Bergin 3 participants 3 messages Oct 28, 2014 – Nov 14, 2014

lore
Share & tools
lore
#0 lore raw

Hi,

I am trying to get icecc working together with Poky (daisy branch). I follow the Yocto Project Reference Manual chapter "7.45. icecc.bbclass" and I can not get it working.

The manual states that I on a distribution level can add the following:

    INHERIT_DISTRO += "icecc"
    ICECC_DISABLED ??= "1"

This will make sure my builders use the same sstate signatures regardless if they use icecc or not. The way I did it to test was to create my own distro layer, called mydist, that inherits from Poky.

    $ cat ../meta-mydist/conf/distro/mydist.conf

require conf/distro/poky.conf

DISTRO = "mydist"
DISTRO_NAME = "MyDist"

INHERIT_DISTRO += "icecc"
ICECC_DISABLED ??= "1"

In my bblayers.conf I added this layer directly after the meta-yocto layer. But with this addition my build environment will not work anymore. What happens is that the variable INHERIT_DISTRO is overwritten because my layer is picked before the poky/meta/conf/distro/defaultsetup.conf. I get the same behaviour if i edit the poky.conf and not use my own distro.

    $ bitbake core-image-base -e

...

#
# $INHERIT_DISTRO [3 operations]
# append /work/yocto/course/meta-mydist/conf/distro/mydist.conf:6
# "icecc"
# set? /work/yocto/course/poky/meta/conf/distro/defaultsetup.conf:22
# "debian devshell sstate license"
# set /work/yocto/course/poky/meta/conf/documentation.conf:226
# [doc] "Lists classes that will be inherited at the distribution level. It is unlikely that you want to edit this variable."
# computed:
# " icecc"
INHERIT_DISTRO=" icecc"
#

...

What is wrong here, documentation or my setup? Can someone give me advice?

Regards,
/Peter

Peter Bergin

[email protected]
+46 733 35 21 05

www.tritech.se
+46 31 763 38 00
Nordstadstorget 6
SE-411 05 G?teborg, Sweden

#1 lore raw

Good day Peter,

Maybe you want to verify first the prioritization of the layers in your set-up.
Please execute bitbake-layers show-layers to really see if meta-yocto is really executed after your layer (meta-mydist)

If you verified that it is,
please add in your conf/layer.conf, BBFILE_PRIORITY_mydist = "any number after meta-yocto".

Maybe that will work for you.

Thanks,
-J

Quoted 79 lines · Peter Bergin

Hi,

I am trying to get icecc working together with Poky (daisy branch). I follow the Yocto Project Reference Manual chapter "7.45. icecc.bbclass" and I can not get it working.

The manual states that I on a distribution level can add the following:

    INHERIT_DISTRO += "icecc"
    ICECC_DISABLED ??= "1"

This will make sure my builders use the same sstate signatures regardless if they use icecc or not. The way I did it to test was to create my own distro layer, called mydist, that inherits from Poky.

    $ cat ../meta-mydist/conf/distro/mydist.conf

require conf/distro/poky.conf

DISTRO = "mydist"
DISTRO_NAME = "MyDist"

INHERIT_DISTRO += "icecc"
ICECC_DISABLED ??= "1"

In my bblayers.conf I added this layer directly after the meta-yocto layer. But with this addition my build environment will not work anymore. What happens is that the variable INHERIT_DISTRO is overwritten because my layer is picked before the poky/meta/conf/distro/defaultsetup.conf. I get the same behaviour if i edit the poky.conf and not use my own distro.

    $ bitbake core-image-base -e

...

#
# $INHERIT_DISTRO [3 operations]
# append /work/yocto/course/meta-mydist/conf/distro/mydist.conf:6
# "icecc"
# set? /work/yocto/course/poky/meta/conf/distro/defaultsetup.conf:22
# "debian devshell sstate license"
# set /work/yocto/course/poky/meta/conf/documentation.conf:226
# [doc] "Lists classes that will be inherited at the distribution
level. It is unlikely that you want to edit this variable."

    # computed:
    #   " icecc"
    INHERIT_DISTRO=" icecc"
    #

    ...

What is wrong here, documentation or my setup? Can someone give me advice?

Regards,
/Peter

Peter Bergin

[email protected]
+46 733 35 21 05

www.tritech.se
+46 31 763 38 00
Nordstadstorget 6
SE-411 05 G?teborg, Sweden
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#2 lore raw

Try to use INHERIT_DISTRO_append.

Quoted 104 lines · Joseph Andrew de la Peña

Good day Peter,

Maybe you want to verify first the prioritization of the layers in your set-up.
Please execute bitbake-layers show-layers to really see if meta-yocto is really executed after your layer (meta-mydist)

If you verified that it is,
please add in your conf/layer.conf, BBFILE_PRIORITY_mydist = "any number after meta-yocto".

Maybe that will work for you.

Thanks,
-J

Quoted 79 lines · Peter Bergin

Hi,

I am trying to get icecc working together with Poky (daisy branch). I follow the Yocto Project Reference Manual chapter "7.45. icecc.bbclass" and I can not get it working.

The manual states that I on a distribution level can add the following:

    INHERIT_DISTRO += "icecc"
    ICECC_DISABLED ??= "1"

This will make sure my builders use the same sstate signatures regardless if they use icecc or not. The way I did it to test was to create my own distro layer, called mydist, that inherits from Poky.

    $ cat ../meta-mydist/conf/distro/mydist.conf

require conf/distro/poky.conf

DISTRO = "mydist"
DISTRO_NAME = "MyDist"

INHERIT_DISTRO += "icecc"
ICECC_DISABLED ??= "1"

In my bblayers.conf I added this layer directly after the meta-yocto layer. But with this addition my build environment will not work anymore. What happens is that the variable INHERIT_DISTRO is overwritten because my layer is picked before the poky/meta/conf/distro/defaultsetup.conf. I get the same behaviour if i edit the poky.conf and not use my own distro.

    $ bitbake core-image-base -e

...

#
# $INHERIT_DISTRO [3 operations]
# append /work/yocto/course/meta-mydist/conf/distro/mydist.conf:6
# "icecc"
# set? /work/yocto/course/poky/meta/conf/distro/defaultsetup.conf:22
# "debian devshell sstate license"
# set /work/yocto/course/poky/meta/conf/documentation.conf:226
# [doc] "Lists classes that will be inherited at the distribution
level. It is unlikely that you want to edit this variable."

    # computed:
    #   " icecc"
    INHERIT_DISTRO=" icecc"
    #

    ...

What is wrong here, documentation or my setup? Can someone give me advice?

Regards,
/Peter

Peter Bergin

[email protected]
+46 733 35 21 05

www.tritech.se
+46 31 763 38 00
Nordstadstorget 6
SE-411 05 G?teborg, Sweden
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Signature · 4 lines
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 1 line
Martin 'JaMa' Jansa     jabber: [email protected]