Skip to contentSkip to conversation

sg3_utils: bump to version 1.40

PATCH New Gustavo Zacarias 2 participants 4 messages Nov 18, 2014

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 sg3_utils: bump to version 1.40

Also add hash file.

---
 package/sg3_utils/sg3_utils.hash |  2 ++
 package/sg3_utils/sg3_utils.mk   | 10 +++++-----
 2 files changed, 7 insertions(+), 5 deletions(-)
 create mode 100644 package/sg3_utils/sg3_utils.hash
package/sg3_utils/sg3_utils.hash new file +2 -0
new file mode 100644
index 0000000..d3ae1a0
@@ -0,0 +1,2 @@
+# Locally calculated from download (no sig, hash)
+sha256	901ece577d797a8a3870881fe765f6eac4bb381b99a1f7311551689e9f17130b	sg3_utils-1.40.tar.xz
package/sg3_utils/sg3_utils.mk +5 -5
index d59d26c..dca0f6b 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-SG3_UTILS_VERSION = 1.39
+SG3_UTILS_VERSION = 1.40
 SG3_UTILS_SOURCE = sg3_utils-$(SG3_UTILS_VERSION).tar.xz
 SG3_UTILS_SITE = http://sg.danny.cz/sg/p
 SG3_UTILS_LICENSE = BSD-3c
@@ -27,10 +27,10 @@ define SG3_UTILS_REMOVE_PROGS
 		raw rbuf rdac read readcap read_block_limits \
 		read_buffer read_long reassign referrals \
 		rep_zones requests reset reset_wp rmsn rtpg safte sanitize \
-		sat_identify sat_phy_event sat_set_features scan \
-		senddiag ses start stpg sync test_rwbuf turs \
-		unmap verify vpd write_buffer write_long \
-		write_same wr_mode xcopy; do \
+		sat_identify sat_phy_event sat_read_gplog sat_set_features \
+		scan senddiag ses ses_microcode start stpg sync test_rwbuf \
+		turs unmap verify vpd write_buffer write_long \
+		write_same write_verify wr_mode xcopy; do \
 		$(RM) $(TARGET_DIR)/usr/bin/sg_$${prog} ; \
 	done
 	for prog in \
Signature · 1 line
2.0.4
#1 lore raw

PATCH 2/2 whois: bump to version 5.2.2

---
 package/whois/whois.hash | 4 ++--
 package/whois/whois.mk   | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
package/whois/whois.hash +2 -2
index 13efa14..858eb94 100644
@@ -1,2 +1,2 @@
-# From http://ftp.debian.org/debian/pool/main/w/whois/whois_5.2.1.dsc
-sha256	54e6b64f16e10bfaf14ac40025b4272090298f0d9d3e62cbadabf946051515e6	whois_5.2.1.tar.xz
+# From http://ftp.debian.org/debian/pool/main/w/whois/whois_5.2.2.dsc
+sha256	cba874b457a6b7c4659245780d3d7321d129ab47da86103e07578ec7430fec09	whois_5.2.2.tar.xz
package/whois/whois.mk +2 -2
index 13c0230..63268c6 100644
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-WHOIS_VERSION = 5.2.1
-WHOIS_SITE = http://snapshot.debian.org/archive/debian/20141023T043132Z/pool/main/w/whois
+WHOIS_VERSION = 5.2.2
+WHOIS_SITE = http://snapshot.debian.org/archive/debian/20141112T101048Z/pool/main/w/whois
 WHOIS_SOURCE = whois_$(WHOIS_VERSION).tar.xz
 # take precedence over busybox implementation
 WHOIS_DEPENDENCIES = host-gettext $(if $(BR2_PACKAGE_BUSYBOX),busybox)
Signature · 1 line
2.0.4
#2 lore raw

PATCH 2/2 whois: bump to version 5.2.2

Dear Gustavo Zacarias,

Quoted 5 lines · Gustavo Zacarias
---
 package/whois/whois.hash | 4 ++--
 package/whois/whois.mk   | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

Thanks, applied to next, after doing a build test on ARM.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
#3 lore raw

PATCH 1/2 sg3_utils: bump to version 1.40

In reply to Gustavo Zacarias

Dear Gustavo Zacarias,

Quoted 8 lines · Gustavo Zacarias

Also add hash file.

---
 package/sg3_utils/sg3_utils.hash |  2 ++
 package/sg3_utils/sg3_utils.mk   | 10 +++++-----
 2 files changed, 7 insertions(+), 5 deletions(-)
 create mode 100644 package/sg3_utils/sg3_utils.hash

Applied to next, after doing a build test on ARM, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com