ARM: imx: device tree changes for 3.19

Hi Olof, Arnd,

This pull request is based on the SoC pull request which tagged as imx-soc-3.19. Please pull, thanks.

Shawn

The following changes since commit dc7aaa041842eb40be7ad7bde0a7e37ac1efd79c:

ARM: configs: imx_v6_v7_defconfig: add power off driver (2014-11-19 11:51:55 +0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-3.19

for you to fetch changes up to c95e259674da685152eb093263478c7ada0aa904:

ARM: dts: imx6: add pm_power_off support for i.mx6 chips (2014-11-19 11:59:38 +0800)

----------------------------------------------------------------
The i.MX device tree changes for 3.19:
- Device additions for board vf610-colibri, pwm, backlight, I2C, RTC, ADC etc.
- Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
- Improve SSI clocks description for i.MX5 platforms
- Add ENET2 support for imx6sx-sdb board
- Add device tree source for LS1021A SoC, board QDS and TWR
- Enable cpufreq support for i.MX53
- Enable VPU device support for i.MX6QDL
- Enable poweroff support for i.MX6 SoCs
- Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
- Create generic base device trees for Vybrid and add support for Colibri VF50

----------------------------------------------------------------
Bhuvanchandra DV (5):
ARM: dts: vf610: Add PWM second instance
ARM: dts: vf610-colibri: Add PWM support
ARM: dts: vf610-colibri: Add backlight support
ARM: dts: vf-colibri: Add I2C support
ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC

Christian Hemp (5):
ARM: dts: imx6: phyFLEX: set nodes in alphabetical order
ARM: dts: imx6: phyFLEX: Enable gpmi in module file
ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic
ARM: dts: imx6: phyFLEX: Add PCIe
ARM: dts: imx6: phyFLEX: Add CAN support

Dmitry Lavnikevich (2):
ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02
ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards

Fabio Estevam (3):
ARM: dts: imx53: Improve SSI clocks description
ARM: dts: imx51: Improve SSI clocks description
ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property

Fugang Duan (1):
ARM: dts: imx6x: Add enet2 support for imx6sx-sdb board

Jingchang Lu (4):
ARM: dts: Add SoC level device tree support for LS1021A
ARM: dts: Add initial LS1021A QDS board dts support
ARM: dts: Add initial LS1021A TWR board dts support
dt-bindings: arm: add Freescale LS1021A SoC device tree binding

Lucas Stach (1):
ARM: dts: imx53: add cpufreq-dt support

Philipp Zabel (1):
ARM: dts: imx6qdl: Enable CODA960 VPU

Robin Gong (1):
ARM: dts: imx6: add pm_power_off support for i.mx6 chips

Sanchayan Maity (1):
ARM: dts: vf610-colibri: Add ADC support

Soeren Moch (2):
devicetree: bindings: Add vendor prefix for TBS Technologies
ARM: dts: add initial support for TBS2910 Matrix ARM mini PC

Stefan Agner (7):
ARM: dts: vf610: Add ARM Global Timer
ARM: dts: vf610: assign oscillator to clock module
ARM: dts: vf610: create generic base device trees
ARM: dts: vf500-colibri: add Colibri VF50 support
ARM: dts: vf610: use new GPIO support
ARM: dts: vf610: enable USB misc/phy nodes where necessary
ARM: dts: vf-colibri: add USB regulators

Vladimir Zapolskiy (1):
ARM: dts: imx6dl: add alias for I2C4 bus

 Documentation/devicetree/bindings/arm/fsl.txt      |  38 ++
 .../devicetree/bindings/clock/vf610-clock.txt      |  15 +
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   4 +
 arch/arm/boot/dts/imx51.dtsi                       |  12 +-
 arch/arm/boot/dts/imx53.dtsi                       |  25 +-
 arch/arm/boot/dts/imx6dl.dtsi                      |   8 +
 arch/arm/boot/dts/imx6q-tbs2910.dts                | 428 ++++++++++++++++++
 arch/arm/boot/dts/imx6q.dtsi                       |   4 +
 arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi       | 131 ++++--
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi       |  97 +++-
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi             |   4 +
 arch/arm/boot/dts/imx6qdl.dtsi                     |  14 +
 arch/arm/boot/dts/imx6sl-evk.dts                   |   4 +
 arch/arm/boot/dts/imx6sl.dtsi                      |   6 +
 arch/arm/boot/dts/imx6sx-sdb.dts                   |  66 +++
 arch/arm/boot/dts/imx6sx.dtsi                      |   8 +-
 arch/arm/boot/dts/ls1021a-qds.dts                  | 240 ++++++++++
 arch/arm/boot/dts/ls1021a-twr.dts                  | 127 ++++++
 arch/arm/boot/dts/ls1021a.dtsi                     | 408 +++++++++++++++++
 arch/arm/boot/dts/vf-colibri-eval-v3.dtsi          |  96 ++++
 arch/arm/boot/dts/vf-colibri.dtsi                  | 186 ++++++++
 arch/arm/boot/dts/vf500-colibri-eval-v3.dts        |  17 +
 arch/arm/boot/dts/vf500-colibri.dtsi               |  20 +
 arch/arm/boot/dts/vf500.dtsi                       | 171 ++++++++
 arch/arm/boot/dts/vf610-colibri-eval-v3.dts        |  33 +-
 arch/arm/boot/dts/vf610-colibri.dtsi               | 100 +----
 arch/arm/boot/dts/vf610-cosmic.dts                 |  14 +-
 arch/arm/boot/dts/vf610-twr.dts                    |  46 +-
 arch/arm/boot/dts/vf610.dtsi                       | 486 +--------------------
 arch/arm/boot/dts/vfxxx.dtsi                       | 437 ++++++++++++++++++
 31 files changed, 2575 insertions(+), 671 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6q-tbs2910.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-qds.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-twr.dts
 create mode 100644 arch/arm/boot/dts/ls1021a.dtsi
 create mode 100644 arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
 create mode 100644 arch/arm/boot/dts/vf-colibri.dtsi
 create mode 100644 arch/arm/boot/dts/vf500-colibri-eval-v3.dts
 create mode 100644 arch/arm/boot/dts/vf500-colibri.dtsi
 create mode 100644 arch/arm/boot/dts/vf500.dtsi
 create mode 100644 arch/arm/boot/dts/vfxxx.dtsi

Again, all changes here look good to me, but as it's based on top of hte other branch, please rebase again. Can you also explain in the tag description why you have based on the other branch? I assume you had a good reason, but it's not obvious to me.

Arnd

The patch "ARM: dts: imx53: add cpufreq-dt support" on imx/dt branch uses the clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk:
add ARM clock" sitting on imx/soc branch. I will put a note into the tag description regarding this dependency.

Shawn

Ok, thanks!

Arnd