ARM: multi_v7_defconfig: Enable Broadcom Cygnus
cover ARM: multi_v7_defconfig: Enable Broadcom Cygnus
Hi Olof, Arnd,
These two patches enable support for the Broadcom Cygnus SoC in the multi_v7_defconfig and also remove one level of menuconfig.
Thanks!
Ray Jui (1):
ARM: multi_v7_defconfig: Enable Broadcom Cygnus
Scott Branden (1):
ARM: multi_v7_defconfig: remove one level of menu from Kconfig
arch/arm/configs/multi_v7_defconfig | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)
Signature · 1 line
1.9.1
PATCH 1/2 ARM: multi_v7_defconfig: remove one level of menu from Kconfig
From: Scott Branden <[email protected]>
remove menu "Broadcom Mobile SoC Selection"
This requires:
- selecting ARCH_BCM_MOBILE based on SoC selections
- fixup multi_v7_defconfig to work with new menu levels of mach-bcm.
--- arch/arm/configs/multi_v7_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/configs/multi_v7_defconfig +2 -1
@@ -17,7 +17,8 @@ CONFIG_MACH_ARMADA_38X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y CONFIG_ARCH_BCM=y -CONFIG_ARCH_BCM_MOBILE=y +CONFIG_ARCH_BCM_21664=y +CONFIG_ARCH_BCM_281XX=y CONFIG_ARCH_BCM_5301X=y CONFIG_ARCH_BRCMSTB=y CONFIG_ARCH_BERLIN=y
Signature · 1 line
1.9.1
PATCH 2/2 ARM: multi_v7_defconfig: Enable Broadcom Cygnus
In reply to Florian FainelliFrom: Ray Jui <[email protected]>
Enable Broadcom Cygnus platform support in multi_v7_defconfig
--- arch/arm/configs/multi_v7_defconfig | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
arch/arm/configs/multi_v7_defconfig +18 -0
@@ -17,6 +17,7 @@ CONFIG_MACH_ARMADA_38X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y CONFIG_ARCH_BCM=y +CONFIG_ARCH_BCM_CYGNUS=y CONFIG_ARCH_BCM_21664=y CONFIG_ARCH_BCM_281XX=y CONFIG_ARCH_BCM_5301X=y
@@ -125,8 +126,12 @@ CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_OMAP_OCP2SCP=y CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_AD525X_DPOT=y CONFIG_AD525X_DPOT_I2C=y
@@ -161,6 +166,7 @@ CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y CONFIG_MARVELL_PHY=y +CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y
@@ -234,6 +240,7 @@ CONFIG_SPI_TEGRA114=y CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y CONFIG_SPI_XILINX=y +CONFIG_SPI_SPIDEV=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y CONFIG_GPIO_SYSFS=y
@@ -260,6 +267,7 @@ CONFIG_ST_THERMAL_SYSCFG=y CONFIG_ST_THERMAL_MEMMAP=y CONFIG_WATCHDOG=y CONFIG_XILINX_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MFD_AS3722=y
@@ -306,6 +314,8 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_SOUND=y CONFIG_SND=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_USB_AUDIO=y CONFIG_SND_SOC=y CONFIG_SND_SOC_TEGRA=y CONFIG_SND_SOC_TEGRA_RT5640=y
@@ -427,7 +437,12 @@ CONFIG_TI_PIPE3=y CONFIG_PHY_MIPHY365X=y CONFIG_PHY_SUN4I_USB=y CONFIG_EXT4_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_UBIFS_FS=y CONFIG_TMPFS=y CONFIG_SQUASHFS=y CONFIG_SQUASHFS_LZO=y
@@ -436,6 +451,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y
Signature · 1 line
1.9.1
cover ARM: multi_v7_defconfig: Enable Broadcom Cygnus
In reply to Florian FainelliQuoted 5 lines · Florian Fainelli
Hi Olof, Arnd,
These two patches enable support for the Broadcom Cygnus SoC in the
multi_v7_defconfigand also remove one level of menuconfig.
Both applied to next/defconfig now. Thanks and sorry for the delay.
Arnd