Skip to contentSkip to conversation

ARM: DTS: OMAP3-N900: add si4713 support

PATCH In review Sebastian Reichel 2 participants 2 messages Nov 15, 2014 – Nov 21, 2014 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: DTS: OMAP3-N900: add si4713 support

Add si4713 node to the N900 device tree file.

---
 arch/arm/boot/dts/omap3-n900.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm/boot/dts/omap3-n900.dts +10 -0
index 9b0494a..81c99f3 100644
@@ -540,6 +540,16 @@
 		power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
 	};
 
+	si4713: si4713@63 {
+		compatible = "silabs,si4713";
+                reg = <0x63>;
+
+                interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+                reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+                vio-supply = <&vio>;
+                vdd-supply = <&vaux1>;
+	};
+
 	bq24150a: bq24150a@6b {
 		compatible = "ti,bq24150a";
 		reg = <0x6b>;
Signature · 1 line
2.1.1
#1 lore raw
Quoted 1 line · Sebastian Reichel

Add si4713 node to the N900 device tree file.

Applying into omap-for-v3.19/dt-v2 thanks.

Tony