ARM: imx: device tree changes for 3.19
Changes since v1:
- Rebase on v3.18-rc3
- Add a note into tag description to tell the dependency on mx-soc-3.19
- Add one patch from Soeren enabling snvs-poweroff for imx6q-tbs2910
The following changes since commit 2ce34b105c79ee0404b3a8f68c9ab2ce197dd06f:
Merge tag 'imx-soc-3.19' into imx/dt (2014-11-23 15:07:02 +0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-3.19
for you to fetch changes up to 96acf9dfe1ba59e99eafcf26478118edd195d924:
ARM: dts: imx6q-tbs2910: Enable snvs-poweroff (2014-11-23 16:13:28 +0800)
----------------------------------------------------------------
The i.MX device tree changes for 3.19:
- Device additions for board vf610-colibri, pwm, backlight, I2C, RTC, ADC etc.
- Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
- Improve SSI clocks description for i.MX5 platforms
- Add ENET2 support for imx6sx-sdb board
- Add device tree source for LS1021A SoC, board QDS and TWR
- Enable cpufreq support for i.MX53
- Enable VPU device support for i.MX6QDL
- Enable poweroff support for i.MX6 SoCs
- Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
- Create generic base device trees for Vybrid and add support for Colibri VF50
Note: the change set is built on top of imx-soc-3.19 to resolve the dependency that "ARM: dts: imx53: add cpufreq-dt support" uses the clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM clock".
----------------------------------------------------------------
Bhuvanchandra DV (5):
ARM: dts: vf610: Add PWM second instance
ARM: dts: vf610-colibri: Add PWM support
ARM: dts: vf610-colibri: Add backlight support
ARM: dts: vf-colibri: Add I2C support
ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC
Christian Hemp (5):
ARM: dts: imx6: phyFLEX: set nodes in alphabetical order
ARM: dts: imx6: phyFLEX: Enable gpmi in module file
ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic
ARM: dts: imx6: phyFLEX: Add PCIe
ARM: dts: imx6: phyFLEX: Add CAN support
Dmitry Lavnikevich (2):
ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02
ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
Fabio Estevam (3):
ARM: dts: imx53: Improve SSI clocks description
ARM: dts: imx51: Improve SSI clocks description
ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property
Fugang Duan (1):
ARM: dts: imx6x: Add enet2 support for imx6sx-sdb board
Jingchang Lu (4):
ARM: dts: Add SoC level device tree support for LS1021A
ARM: dts: Add initial LS1021A QDS board dts support
ARM: dts: Add initial LS1021A TWR board dts support
dt-bindings: arm: add Freescale LS1021A SoC device tree binding
Lucas Stach (1):
ARM: dts: imx53: add cpufreq-dt support
Philipp Zabel (1):
ARM: dts: imx6qdl: Enable CODA960 VPU
Robin Gong (1):
ARM: dts: imx6: add pm_power_off support for i.mx6 chips
Sanchayan Maity (1):
ARM: dts: vf610-colibri: Add ADC support
Soeren Moch (3):
devicetree: bindings: Add vendor prefix for TBS Technologies
ARM: dts: add initial support for TBS2910 Matrix ARM mini PC
ARM: dts: imx6q-tbs2910: Enable snvs-poweroff
Stefan Agner (7):
ARM: dts: vf610: Add ARM Global Timer
ARM: dts: vf610: assign oscillator to clock module
ARM: dts: vf610: create generic base device trees
ARM: dts: vf500-colibri: add Colibri VF50 support
ARM: dts: vf610: use new GPIO support
ARM: dts: vf610: enable USB misc/phy nodes where necessary
ARM: dts: vf-colibri: add USB regulators
Vladimir Zapolskiy (1):
ARM: dts: imx6dl: add alias for I2C4 bus
Documentation/devicetree/bindings/arm/fsl.txt | 38 ++ .../devicetree/bindings/clock/vf610-clock.txt | 15 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 4 + arch/arm/boot/dts/imx51.dtsi | 12 +- arch/arm/boot/dts/imx53.dtsi | 25 +- arch/arm/boot/dts/imx6dl.dtsi | 8 + arch/arm/boot/dts/imx6q-tbs2910.dts | 432 ++++++++++++++++++ arch/arm/boot/dts/imx6q.dtsi | 4 + arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 131 ++++-- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 97 +++- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 4 + arch/arm/boot/dts/imx6qdl.dtsi | 14 + arch/arm/boot/dts/imx6sl-evk.dts | 4 + arch/arm/boot/dts/imx6sl.dtsi | 6 + arch/arm/boot/dts/imx6sx-sdb.dts | 66 +++ arch/arm/boot/dts/imx6sx.dtsi | 8 +- arch/arm/boot/dts/ls1021a-qds.dts | 240 ++++++++++ arch/arm/boot/dts/ls1021a-twr.dts | 127 ++++++ arch/arm/boot/dts/ls1021a.dtsi | 408 +++++++++++++++++ arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 96 ++++ arch/arm/boot/dts/vf-colibri.dtsi | 186 ++++++++ arch/arm/boot/dts/vf500-colibri-eval-v3.dts | 17 + arch/arm/boot/dts/vf500-colibri.dtsi | 20 + arch/arm/boot/dts/vf500.dtsi | 171 ++++++++ arch/arm/boot/dts/vf610-colibri-eval-v3.dts | 33 +- arch/arm/boot/dts/vf610-colibri.dtsi | 100 +---- arch/arm/boot/dts/vf610-cosmic.dts | 14 +- arch/arm/boot/dts/vf610-twr.dts | 46 +- arch/arm/boot/dts/vf610.dtsi | 486 +-------------------- arch/arm/boot/dts/vfxxx.dtsi | 437 ++++++++++++++++++ 31 files changed, 2579 insertions(+), 671 deletions(-) create mode 100644 arch/arm/boot/dts/imx6q-tbs2910.dts create mode 100644 arch/arm/boot/dts/ls1021a-qds.dts create mode 100644 arch/arm/boot/dts/ls1021a-twr.dts create mode 100644 arch/arm/boot/dts/ls1021a.dtsi create mode 100644 arch/arm/boot/dts/vf-colibri-eval-v3.dtsi create mode 100644 arch/arm/boot/dts/vf-colibri.dtsi create mode 100644 arch/arm/boot/dts/vf500-colibri-eval-v3.dts create mode 100644 arch/arm/boot/dts/vf500-colibri.dtsi create mode 100644 arch/arm/boot/dts/vf500.dtsi create mode 100644 arch/arm/boot/dts/vfxxx.dtsi
Quoted 33 lines · Shawn Guo
Changes since v1:
- Rebase on v3.18-rc3
- Add a note into tag description to tell the dependency on mx-soc-3.19
- Add one patch from Soeren enabling snvs-poweroff for imx6q-tbs2910The following changes since commit
2ce34b105c79ee0404b3a8f68c9ab2ce197dd06f:Merge tag 'imx-soc-3.19' into imx/dt (2014-11-23 15:07:02 +0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.gittags/imx-dt-3.19for you to fetch changes up to
96acf9dfe1ba59e99eafcf26478118edd195d924:ARM: dts: imx6q-tbs2910: Enable snvs-poweroff (2014-11-23 16:13:28 +0800)
----------------------------------------------------------------
The i.MX device tree changes for 3.19:
- Device additions for board vf610-colibri, pwm, backlight, I2C, RTC, ADC etc.
- Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
- Improve SSI clocks description for i.MX5 platforms
- Add ENET2 support for imx6sx-sdb board
- Add device tree source for LS1021A SoC, board QDS and TWR
- Enable cpufreq support for i.MX53
- Enable VPU device support for i.MX6QDL
- Enable poweroff support for i.MX6 SoCs
- Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
- Create generic base device trees for Vybrid and add support for Colibri VF50
Quoted 5 lines
Note: the change set is built on top of imx-soc-3.19 to resolve the dependency that "ARM: dts: imx53: add cpufreq-dt support" uses the clock define
IMX5_CLK_ARMthat is added by "ARM: imx53: clk: add ARM clock".
Pulled into next/dt, thanks!
Arnd