Input: xpad: use proper endpoint type

The xpad wireless endpoint is not a bulk endpoint on my devices, but rather an interrupt one, so the USB core complains when it is submitted. I'm guessing that the author really did mean that this should be an interrupt urb, but as there are a zillion different xpad devices out there, let's cover out bases and handle both bulk and interrupt endpoints just as easily.

Signed-off-by "Pierre-Loup A. Griffais" <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

Cc stable <[email protected]>

---

This has been in my local tree since January, don't know why it never got pushed out, sorry for the delay. Valve has been using a version of this patch for a year now.

 drivers/input/joystick/xpad.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

drivers/input/joystick/xpad.c +13 -3

@@ -1179,9 +1179,19 @@ static int xpad_probe(struct usb_interfa
 		}
 
 		ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
-		usb_fill_bulk_urb(xpad->bulk_out, udev,
-				usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
-				xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
+		if (usb_endpoint_is_bulk_out(ep_irq_in)) {
+			usb_fill_bulk_urb(xpad->bulk_out, udev,
+					  usb_sndbulkpipe(udev,
+							  ep_irq_in->bEndpointAddress),
+					  xpad->bdata, XPAD_PKT_LEN,
+					  xpad_bulk_out, xpad);
+		} else {
+			usb_fill_int_urb(xpad->bulk_out, udev,
+					 usb_sndintpipe(udev,
+							ep_irq_in->bEndpointAddress),
+					 xpad->bdata, XPAD_PKT_LEN,
+					 xpad_bulk_out, xpad, 0);
+		}
 
 		/*
 		 * Submit the int URB immediately rather than waiting for open