Please pull u-boot-imx
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit f196044dfd64745a163773c6c746f9e149ace127:
ARM: atmel: add sama5d4 xplained ultra board support (2014-11-17
08:47:18 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to e7eb277dced570f177d75d56f40219d9dc599ed1:
mx6boards: Fix error handling in board_mmc_init() (2014-11-24 12:10:18
+0100)
----------------------------------------------------------------
Albert ARIBAUD (3):
cosmetic: arm: fix whitespace in arch/arm/lib/relocate.S
imx: fix exception vectors relocation in imx27 tools/msximage.c: fix warning about nptr possibly uninitialized
Alexey Ignatov (1):
ARM: mxs: tools: Add support for boot progress display flag
Fabio Estevam (23):
mx6sabresd: Move the DCD settings to spl code
gw_ventana: Move the DCD settings to spl code
novena: Move the DCD settings to spl code
mx6: Use a common SPL configuration file
imx: consolidate set_chipselect_size function
mx6: add weim registers
mx6qsabreauto: Add parallel NOR flash support
wandboard: Fix error handling in board_mmc_init()
mx53loco: Fix error handling in board_mmc_init()
mx6sabresd: State that only mx6q is supported in SPL
mx6slevk: Simplify the return value of setup_fec()
mx6sxsabresd: Simplify the return value of setup_fec()
mx6sabresd: Add mx6sabresd_spl_defconfig to MAINTAINERS entry
mx6sabresd: Access SRC_SBMR1 register via structure
mx51evk: Fix error handling in board_mmc_init()
mx6qarm2: Fix error handling in board_mmc_init()
mx53smd: Fix error handling in board_mmc_init()
mx53evk: Fix error handling in board_mmc_init()
mx53ard: Fix error handling in board_mmc_init()
gw_ventana: Use the generic spl_sd.cfg
ot1200: Fix error handling in board_mmc_init()
nitrogen6x: Fix error handling in board_mmc_init()
mx6boards: Fix error handling in board_mmc_init()
Markus Niebel (4):
tqma6: (cosmetic) remove CONFIG_FLASH_SECTOR_SIZE
tqma6: add missing include
tqma6: add warning on failed setup_i2c
tqma6: use imx_ddr_size
Nikita Kiryanov (5):
arm: mx6: introduce disable_sata_clock
sata: implement reset_sata for dwc_ahsata
cmd_sata: implement sata stop command
arm: mx6: cm_fx6: implement board specific sata stop
arm: imx: stop sata on boot
Nitin Garg (1):
mx6: clock: Add thermal clock enable function
Peng Fan (1):
imx:mx6sxsabresd fix pfuz probe failed
Soeren Moch (1):
tbs2910: Fix error handling in board_mmc_init()
Ye.Li (11):
imx: mx6slevk: Change default mmcdev to USDHC2 device
mmc: fsl_esdhc: Update esdhc driver for iMX6SX
imx: mx6sxsabresd: Add board support for USDHC2 and USDHC3
power: pfuze100: Update definitions for buck regulators
imx: mx6sabre common: Factorize the Pfuze init function
imx: mx6sabresd: Use the pfuze common init function
imx: mx6sxsabresd: Use the pfuze common init function
imx: imx6q/dlsabreauto: Add PMIC Pfuze100 support
DM: thermal: Add imx thermal DM driver
mx6: thermal: Check cpu temperature via thermal sensor
mx6: mx6sabre common: Enable i.MX thermal DM driver
arch/arm/cpu/arm926ejs/mx27/Makefile | 4 + arch/arm/cpu/arm926ejs/mx27/relocate.S | 51 ++++ .../arm926ejs/mxs/mxsimage-signed.cfg | 1 + .../cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 1 + .../cpu/arm926ejs/mxs/mxsimage.mx28.cfg | 1 + arch/arm/cpu/armv7/mx5/soc.c | 31 --- arch/arm/cpu/armv7/mx6/clock.c | 38 +++ arch/arm/cpu/armv7/mx6/soc.c | 15 ++ arch/arm/cpu/armv7/omap-common/sata.c | 5 + arch/arm/imx-common/cpu.c | 60 ++++- .../arm/imx-common/spl_sd.cfg | 2 +- arch/arm/include/asm/arch-imx/cpu.h | 5 + .../arm/include/asm/arch-mx5/imx-regs.h | 12 +- arch/arm/include/asm/arch-mx6/clock.h | 2 + .../arm/include/asm/arch-mx6/imx-regs.h | 37 +++ .../include/asm/arch-mx6/sys_proto.h | 1 + arch/arm/lib/crt0.S | 5 + arch/arm/lib/relocate.S | 73 +++--- board/bachmann/ot1200/ot1200.c | 10 +- board/boundary/nitrogen6x/nitrogen6x.c | 10 +- board/compulab/cm_fx6/cm_fx6.c | 12 +- board/embest/mx6boards/mx6boards.c | 10 +- board/freescale/common/Makefile | 1 + board/freescale/common/pfuze.c | 54 ++++ board/freescale/common/pfuze.h | 12 + board/freescale/mx51evk/mx51evk.c | 10 +- board/freescale/mx53ard/mx53ard.c | 10 +- board/freescale/mx53evk/mx53evk.c | 10 +- board/freescale/mx53loco/mx53loco.c | 10 +- board/freescale/mx53smd/mx53smd.c | 10 +- board/freescale/mx6qarm2/mx6qarm2.c | 10 +- .../mx6qsabreauto/mx6qsabreauto.c | 95 ++++++- board/freescale/mx6sabresd/MAINTAINERS | 1 + board/freescale/mx6sabresd/mx6sabresd.c | 90 +++---- .../mx6sabresd/mx6sabresd_spl.cfg | 58 ----- board/freescale/mx6slevk/mx6slevk.c | 7 +- .../mx6sxsabresd/mx6sxsabresd.c | 159 ++++++++---- board/gateworks/gw_ventana/clocks.cfg | 42 ---- .../gateworks/gw_ventana/gw_ventana.cfg | 29 --- .../gw_ventana/gw_ventana_spl.c | 28 +++ board/kosagi/novena/novena_spl.c | 28 +++ board/kosagi/novena/setup.cfg | 47 ---- board/tbs/tbs2910/tbs2910.c | 13 +- board/tqc/tqma6/tqma6.c | 13 +- board/tqc/tqma6/tqma6_mba6.c | 10 +- board/wandboard/wandboard.c | 10 +- common/cmd_sata.c | 24 +- configs/cm_fx6_defconfig | 2 +- configs/gwventana_defconfig | 2 +- configs/mx6sabresd_spl_defconfig | 2 +- configs/novena_defconfig | 2 +- doc/README.mxsimage | 13 +- drivers/Makefile | 1 + drivers/block/ata_piix.c | 5 + drivers/block/dwc_ahsata.c | 21 ++ drivers/block/fsl_sata.c | 5 + drivers/block/pata_bfin.c | 5 + drivers/block/sata_dwc.c | 5 + drivers/block/sata_sil.c | 5 + drivers/block/sata_sil3114.c | 5 + drivers/mmc/fsl_esdhc.c | 8 + drivers/thermal/Makefile | 9 + drivers/thermal/imx_thermal.c | 177 ++++++++++++++ drivers/thermal/thermal-uclass.c | 30 +++ include/configs/mx6qsabreauto.h | 16 ++ include/configs/mx6sabre_common.h | 7 +- include/configs/mx6slevk.h | 2 +- include/configs/mx6sxsabresd.h | 8 +- include/configs/tqma6.h | 28 +-- include/dm/uclass-id.h | 1 + include/imx_thermal.h | 17 ++ include/power/pfuze100_pmic.h | 80 ++++++ include/sata.h | 3 + include/thermal.h | 42 ++++ tools/mxsimage.c | 20 +- tools/mxsimage.h | 5 +- 76 files changed, 1242 insertions(+), 451 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/mx27/relocate.S rename board/compulab/cm_fx6/imximage.cfg => arch/arm/imx-common/spl_sd.cfg (88%) create mode 100644 board/freescale/common/pfuze.c create mode 100644 board/freescale/common/pfuze.h delete mode 100644 board/freescale/mx6sabresd/mx6sabresd_spl.cfg delete mode 100644 board/gateworks/gw_ventana/clocks.cfg delete mode 100644 board/gateworks/gw_ventana/gw_ventana.cfg delete mode 100644 board/kosagi/novena/setup.cfg create mode 100644 drivers/thermal/Makefile create mode 100644 drivers/thermal/imx_thermal.c create mode 100644 drivers/thermal/thermal-uclass.c create mode 100644 include/imx_thermal.h create mode 100644 include/thermal.h
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
Quoted 9 lines · Stefano Babic
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit
f196044dfd64745a163773c6c746f9e149ace127:ARM: atmel: add sama5d4 xplained ultra board support (2014-11-17
08:47:18 -0500)
Quoted 9 lines
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.gitmasterfor you to fetch changes up to
e7eb277dced570f177d75d56f40219d9dc599ed1:mx6boards: Fix error handling in
board_mmc_init()(2014-11-24 12:10:18
+0100)
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141124/53207c15/attachment.pgp>