Fix for ns16550 driver hanging on OMAP4
Here is a patch to apply the same fix on OMAP4 boards as on OMAP3, in order to prevent ns16550 hanging during SPL boot,
Gr?goire
drivers/serial/ns16550.c +0 -0
@@ -132,9 +132,9 @@ static void NS16550_setbrg(NS16550_t com_port, int
baud_divisor)
void NS16550_init(NS16550_t com_port, int baud_divisor) {
-#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX)) +#if (defined(CONFIG_SPL_BUILD) && (defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX)))
/*
- * On some OMAP3 devices when UART3 is configured for boot mode
before
+ * On some OMAP3/OMAP4 devices when UART3 is configured for boot
mode before
* SPL starts only THRE bit is set. We have to empty the
transmitter
* before initialization starts.
*/
Gr?goire
drivers/serial/ns16550.c
Quoted 19 lines · Gregoire Gentil
Here is a patch to apply the same fix on OMAP4 boards as on OMAP3, in order to prevent ns16550 hanging during SPL boot,
Gr?goire
mode before
* SPL starts only THRE bit is set. We have to empty the
transmitter
* before initialization starts.
*/Gr?goire
drivers/serial/ns16550.c +0
-0
Applied to u-boot-ti/master after re-wordding commit message, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141205/6e11a3fb/attachment.pgp>