ARM: dts: sun6i: hummingbird: Add ethernet phy reset gpio properties
Subsystems (2)
PATCH 1/1 ARM: dts: sun6i: hummingbird: Add ethernet phy reset gpio properties
On the Hummingbird A31 board, the RTL8211E ethernet phy has its reset line connect to a gpio pin, instead of floating like on other boards. Add the stmmac properties for describing the reset gpio.
The reset delays were taken from the RTL8211E datasheet.
Signed-off-by Chen-Yu Tsai <[email protected]>
--- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/boot/dts/sun6i-a31-hummingbird.dts +3 -0
@@ -139,6 +139,9 @@ pinctrl-0 = <&gmac_pins_rgmii_a>; phy = <&phy1>; phy-mode = "rgmii"; + snps,reset-gpio = <&pio 0 21 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; status = "okay"; phy1: ethernet-phy at 1 {
Signature · 1 line
2.1.3
Maxime Ripard
AppliedPATCH 1/1 ARM: dts: sun6i: hummingbird: Add ethernet phy reset gpio properties
Quoted 7 lines · Chen-Yu Tsai
On the Hummingbird A31 board, the RTL8211E ethernet phy has its reset line connect to a gpio pin, instead of floating like on other boards. Add the stmmac properties for describing the reset gpio.
The reset delays were taken from the RTL8211E datasheet.
Signed-off-by Chen-Yu Tsai <[email protected]>
Queued, thanks.
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141208/a345d5c7/attachment.sig>