hwmon updates for 3.19
Hi Linus,
Please pull hwmon updates for Linux 3.19 from signed tag:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-for-linus-v3.19
Thanks,
Guenter
------
The following changes since commit 009d0431c3914de64666bec0d350e54fdd59df6a:
Linux 3.18-rc7 (2014-11-30 16:42:27 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git tags/hwmon-for-linus-3.19
for you to fetch changes up to 907a6d5824599d09e986105a5a880d119a996c4b:
hwmon: (tmp401) Detect TMP435 on all addresses it supports (2014-12-08 06:48:37 -0800)
----------------------------------------------------------------
Notable changes:
New driver for NCT7802Y
Add support for TMP435, LM95233, LM95235, NCT6792D, and NXP LM75B Add regulator support for PMBus chips, specifically LTX2978 Add support for humidity sensors to iio-hwmon bridge driver
----------------------------------------------------------------
Alan Tull (4):
hwmon: (ltc2978) device tree bindings documentation
hwmon: (pmbus) add helpers for byte write and read modify write
hwmon: (pmbus) Add regulator support
hwmon: (ltc2978) Add regulator support
Axel Lin (1):
hwmon: (ibmpowernv) Convert to module_platform_driver
Bartosz Golaszewski (2):
hwmon: (ina2xx) bail-out from ina2xx_probe() in case of configuration errors
hwmon: (tmp401) Bail out from tmp401_probe() in case of write errors
Guenter Roeck (9):
hwmon: (iio_hwmon) Add support for humidity sensors
hwmon: Driver for Nuvoton NCT7802Y
hwmon: (nct6775) Documentation updates
hwmon: (nct6775) Add support for NCT6792D
hwmon: (nct6775) Add blank lines after declarations
hwmon: (lm95245) Add support for LM95235
hwmon: (lm95234) Add support for LM95233
hwmon: (lm75) Strengthen detect function
hwmon: (tmp401) Detect TMP435 on all addresses it supports
Michael Thalmeier (1):
hwmon: (lm75) Add support for the NXP LM75B
Neelesh Gupta (1):
hwmon: (ibmpowernv) Use platform 'id_table' to probe the device
Nishanth Menon (2):
hwmon: (gpio-fan) Allow usage of gpio operations that may sleep
hwmon: (gpio-fan) Add a shutdown handler to poweroff the fans
Patrick Titiano (1):
hwmon: (tmp401) Add support for TI TMP435
.../devicetree/bindings/hwmon/ltc2978.txt | 39 + Documentation/hwmon/lm75 | 5 + Documentation/hwmon/lm95234 | 15 +- Documentation/hwmon/lm95245 | 14 +- Documentation/hwmon/nct6775 | 14 +- Documentation/hwmon/nct7802 | 32 + Documentation/hwmon/tmp401 | 8 +- arch/powerpc/platforms/powernv/opal-sensor.c | 20 + drivers/hwmon/Kconfig | 28 +- drivers/hwmon/Makefile | 1 + drivers/hwmon/gpio-fan.c | 18 +- drivers/hwmon/ibmpowernv.c | 78 +- drivers/hwmon/iio_hwmon.c | 7 +- drivers/hwmon/ina2xx.c | 26 +- drivers/hwmon/lm75.c | 12 + drivers/hwmon/lm95234.c | 91 ++- drivers/hwmon/lm95245.c | 41 +- drivers/hwmon/nct6775.c | 77 +- drivers/hwmon/nct7802.c | 860 +++++++++++++++++++++ drivers/hwmon/pmbus/Kconfig | 11 +- drivers/hwmon/pmbus/ltc2978.c | 39 +- drivers/hwmon/pmbus/pmbus.h | 30 + drivers/hwmon/pmbus/pmbus_core.c | 118 +++ drivers/hwmon/tmp401.c | 42 +- include/linux/i2c/pmbus.h | 4 + 25 files changed, 1465 insertions(+), 165 deletions(-) create mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt create mode 100644 Documentation/hwmon/nct7802 create mode 100644 drivers/hwmon/nct7802.c
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 4 lines · Guenter Roeck
Please pull hwmon updates for Linux 3.19 from signed tag:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.githwmon-for-linus-v3.19
Yeah, no, that doesn't exist.
But this does:
Quoted 1 line
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.gittags/hwmon-for-linus-3.19
Notice the 'v' (or lack-there-of). It took me a while to notice that your two tag-names weren't actually the same.
Linus
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 6 lines · Linus Torvalds
Quoted 4 lines · Guenter Roeck
Please pull hwmon updates for Linux 3.19 from signed tag:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.githwmon-for-linus-v3.19
Quoted 9 lines
Yeah, no, that doesn't exist.
But this does:
Quoted 1 line
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.gittags/hwmon-for-linus-3.19Notice the 'v' (or lack-there-of). It took me a while to notice that your two tag-names weren't actually the same.
Oh well. Sorry for that. The tag _was_ supposed to have a 'v' in it. I see you pulled anyway - thanks.
And I owe you a beer or two next time I see you.
Guenter
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Hi Guenter,
Quoted 4 lines · On Mon, 8 Dec 2014 20:01:44 -0800 Guenter Roeck <[email protected]> wrote:
Please pull hwmon updates for Linux 3.19 from signed tag:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.githwmon-for-linus-v3.19
This does not match
Quoted 3 lines
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.gittags/hwmon-for-linus-3.19
this ('v' difference - the latter exists) ...
Signature · 2 lines
Cheers, Stephen Rothwell [email protected]
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors