clk: shmobile: Add r8a7793 support
Subsystems (2)
PATCH 1/1 clk: shmobile: Add r8a7793 support
From: Hisashi Nakamura <[email protected]>
R-Car M2N (r8a7793) clock is handled in R-Car Gen2 clock driver.
---
This patch is based on renesas/devel.
drivers/clk/shmobile/Makefile | 1 + 1 file changed, 1 insertion(+)
drivers/clk/shmobile/Makefile +1 -0
@@ -4,6 +4,7 @@ obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o +obj-$(CONFIG_ARCH_R8A7793) += clk-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7794) += clk-rcar-gen2.o obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o
Signature · 1 line
1.9.1
PATCH 1/1 clk: shmobile: Add r8a7793 support
Hi Kaneko-san,
Quoted 3 lines · Yoshihiro Kaneko
From: Hisashi Nakamura <[email protected]>
R-Car M2N (r8a7793) clock is handled in R-Car Gen2 clock driver.
Thanks for your patch!
Quoted 2 lines
Signed-off-by Hisashi Nakamura <[email protected]>Signed-off-by Yoshihiro Kaneko <[email protected]>
Can you please also send a patch to update the binding documentation in Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt?
Thanks again!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
PATCH 1/1 clk: shmobile: Add r8a7793 support
Hi Geert-san,
2014-12-08 20:13 GMT+09:00 Geert Uytterhoeven <[email protected]>:
Quoted 9 lines
Hi Kaneko-san,
Quoted 3 lines · Yoshihiro Kaneko
From: Hisashi Nakamura <[email protected]>
R-Car M2N (r8a7793) clock is handled in R-Car Gen2 clock driver.
Thanks for your patch!
Quoted 7 lines
Quoted 2 lines
Signed-off-by Hisashi Nakamura <[email protected]>Signed-off-by Yoshihiro Kaneko <[email protected]>Can you please also send a patch to update the binding documentation in
Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt?
This patch updates Makefile only, not added dtsi for r8a7793. Is the update of the document necessary?
Thanks,
Kaneko
Quoted 13 lines
Thanks again!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.orgIn personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
PATCH 1/1 clk: shmobile: Add r8a7793 support
Hi Kaneko-san,
Quoted 11 lines · Yoshihiro Kaneko
2014-12-08 20:13 GMT+09:00 Geert Uytterhoeven <[email protected]>:
Quoted 10 lines · Yoshihiro Kaneko
Quoted 3 lines
From: Hisashi Nakamura <[email protected]>
R-Car M2N (r8a7793) clock is handled in R-Car Gen2 clock driver.
Thanks for your patch!
Quoted 2 lines
Signed-off-by Hisashi Nakamura <[email protected]>Signed-off-by Yoshihiro Kaneko <[email protected]>
Quoted 7 lines
Quoted 4 lines
Can you please also send a patch to update the binding documentation in
Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt?This patch updates
Makefileonly, not added dtsi for r8a7793. Is the update of the document necessary?
Not at this moment. I was just trying to be proactive ;-)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
PATCH 1/1 clk: shmobile: Add r8a7793 support
Quoted 16 lines · Geert Uytterhoeven
Hi Kaneko-san,
Quoted 13 lines · Yoshihiro Kaneko
2014-12-08 20:13 GMT+09:00 Geert Uytterhoeven <[email protected]>:
Quoted 12 lines · Yoshihiro Kaneko
Quoted 3 lines
From: Hisashi Nakamura <[email protected]>
R-Car M2N (r8a7793) clock is handled in R-Car Gen2 clock driver.
Thanks for your patch!
Quoted 2 lines
Signed-off-by Hisashi Nakamura <[email protected]>Signed-off-by Yoshihiro Kaneko <[email protected]>
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Can you please also send a patch to update the binding documentation in
Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt?This patch updates
Makefileonly, not added dtsi for r8a7793. Is the update of the document necessary?Not at this moment. I was just trying to be proactive ;-)
Kaneko-san,
I think that the update to renesas,rcar-gen2-cpg-clocks.txt should be a one line change. I can prepare a patch if you prefer not to.
PATCH 1/1 clk: shmobile: Add r8a7793 support
Hi Simon-san,
2014-12-09 9:23 GMT+09:00 Simon Horman <[email protected]>:
Quoted 23 lines · Geert Uytterhoeven
Quoted 22 lines
Hi Kaneko-san,
Quoted 18 lines · Yoshihiro Kaneko
2014-12-08 20:13 GMT+09:00 Geert Uytterhoeven <[email protected]>:
Quoted 7 lines · Yoshihiro Kaneko
Quoted 3 lines
From: Hisashi Nakamura <[email protected]>
R-Car M2N (r8a7793) clock is handled in R-Car Gen2 clock driver.
Thanks for your patch!
Quoted 7 lines
Quoted 2 lines
Signed-off-by Hisashi Nakamura <[email protected]>Signed-off-by Yoshihiro Kaneko <[email protected]>Can you please also send a patch to update the binding documentation in
Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt?This patch updates
Makefileonly, not added dtsi for r8a7793. Is the update of the document necessary?
Quoted 6 lines
Quoted 1 line
Not at this moment. I was just trying to be proactive ;-)
Kaneko-san,
I think that the update to renesas,rcar-gen2-cpg-clocks.txt should be a one line change. I can prepare a patch if you prefer not to.
Yes, I know that the update is very small.
But "renesas,r8a7793-cpg-clocks" which will be added to the documentation was not found anywhere in the source tree. For example, "renesas,r8a7794-cpg-clocks"
is found in arch/arm/boot/dts/r8a7794.dtsi.
Is r8a7793.dtsi not necessary to update the document?
PATCH 1/1 clk: shmobile: Add r8a7793 support
Quoted 33 lines · Yoshihiro Kaneko
Hi Simon-san,
2014-12-09 9:23 GMT+09:00 Simon Horman <[email protected]>:
Quoted 23 lines · Geert Uytterhoeven
Quoted 22 lines
Hi Kaneko-san,
Quoted 18 lines · Yoshihiro Kaneko
2014-12-08 20:13 GMT+09:00 Geert Uytterhoeven <[email protected]>:
Quoted 7 lines · Yoshihiro Kaneko
Quoted 3 lines
From: Hisashi Nakamura <[email protected]>
R-Car M2N (r8a7793) clock is handled in R-Car Gen2 clock driver.
Thanks for your patch!
Quoted 7 lines
Quoted 2 lines
Signed-off-by Hisashi Nakamura <[email protected]>Signed-off-by Yoshihiro Kaneko <[email protected]>Can you please also send a patch to update the binding documentation in
Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt?This patch updates
Makefileonly, not added dtsi for r8a7793. Is the update of the document necessary?Quoted 6 lines
Quoted 1 line
Not at this moment. I was just trying to be proactive ;-)
Kaneko-san,
I think that the update to renesas,rcar-gen2-cpg-clocks.txt should be a one line change. I can prepare a patch if you prefer not to.
Quoted 6 lines
Yes, I know that the update is very small.
But "renesas,r8a7793-cpg-clocks" which will be added to the documentation was not found anywhere in the source tree. For example, "renesas,r8a7794-cpg-clocks"
is found inarch/arm/boot/dts/r8a7794.dtsi.
Isr8a7793.dtsinot necessary to update the document?
In theory (though not always in practice) bindings should be documented before they are used. So unless I misunderstand things, yes, I think renesas,rcar-gen2-cpg-clocks.txt should be updated even though arch/arm/boot/dts/r8a7794.dtsi is (not yet) updated.
PATCH 1/1 clk: shmobile: Add r8a7793 support
2014-12-10 9:18 GMT+09:00 Simon Horman <[email protected]>:
Quoted 41 lines · Yoshihiro Kaneko
Quoted 33 lines
Hi Simon-san,
2014-12-09 9:23 GMT+09:00 Simon Horman <[email protected]>:
Quoted 23 lines · Geert Uytterhoeven
Quoted 22 lines
Hi Kaneko-san,
Quoted 18 lines · Yoshihiro Kaneko
2014-12-08 20:13 GMT+09:00 Geert Uytterhoeven <[email protected]>:
Quoted 7 lines · Yoshihiro Kaneko
Quoted 3 lines
From: Hisashi Nakamura <[email protected]>
R-Car M2N (r8a7793) clock is handled in R-Car Gen2 clock driver.
Thanks for your patch!
Quoted 7 lines
Quoted 2 lines
Signed-off-by Hisashi Nakamura <[email protected]>Signed-off-by Yoshihiro Kaneko <[email protected]>Can you please also send a patch to update the binding documentation in
Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt?This patch updates
Makefileonly, not added dtsi for r8a7793. Is the update of the document necessary?Quoted 6 lines
Quoted 1 line
Not at this moment. I was just trying to be proactive ;-)
Kaneko-san,
I think that the update to renesas,rcar-gen2-cpg-clocks.txt should be a one line change. I can prepare a patch if you prefer not to.
Quoted 6 lines
Yes, I know that the update is very small.
But "renesas,r8a7793-cpg-clocks" which will be added to the documentation was not found anywhere in the source tree. For example, "renesas,r8a7794-cpg-clocks"
is found inarch/arm/boot/dts/r8a7794.dtsi.
Isr8a7793.dtsinot necessary to update the document?
Quoted 4 lines
In theory (though not always in practice) bindings should be documented before they are used. So unless I misunderstand things, yes, I think renesas,rcar-gen2-cpg-clocks.txt should be updated even though
arch/arm/boot/dts/r8a7794.dtsiis (not yet) updated.
I got it. I can prepare a patch which updates the binding document.