Skip to contentSkip to conversation

ARM: shmobile: genmai dts: Replace status value "ok" by "okay"

PATCH New Geert Uytterhoeven 2 participants 8 messages Dec 9, 2014 – Dec 10, 2014

Subsystems (2)
Device tree bindings SuperH
lore
Share & tools
lore

Geert Uytterhoeven

author
#0 lore raw

PATCH 1/7 ARM: shmobile: genmai dts: Replace status value "ok" by "okay"

While the DT parsing code recognizes "ok" as a valid value for the "status" property, ePAPR v1.1 doesn't mention it in the list of valid values.

Signed-off-by Geert Uytterhoeven <[email protected]>
---
 arch/arm/boot/dts/r7s72100-genmai.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/r7s72100-genmai.dts +1 -1
index 1518c5bcca33d8d1..a9da7a89fc4ba65a 100644
@@ -45,7 +45,7 @@
 };
 
 &mtu2 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c2 {
Signature · 1 line
1.9.1
author
#1 lore raw

PATCH 2/7 ARM: shmobile: armadillo800eva dts: Replace status value "ok" by "okay"

While the DT parsing code recognizes "ok" as a valid value for the "status" property, ePAPR v1.1 doesn't mention it in the list of valid values.

Signed-off-by Geert Uytterhoeven <[email protected]>
---
 arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/r8a7740-armadillo800eva.dts +2 -2
index d4af4d86c6b03d01..9bd0cb439f448d03 100644
@@ -172,7 +172,7 @@
 	pinctrl-names = "default";
 
 	phy-handle = <&phy0>;
-	status = "ok";
+	status = "okay";
 
 	phy0: ethernet-phy at 0 {
 		reg = <0>;

@@ -193,7 +193,7 @@
 };
 
 &cmt1 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
Signature · 1 line
1.9.1
author
#2 lore raw

PATCH 3/7 ARM: shmobile: lager dts: Replace status value "ok" by "okay"

In reply to Geert Uytterhoeven

While the DT parsing code recognizes "ok" as a valid value for the "status" property, ePAPR v1.1 doesn't mention it in the list of valid values.

Signed-off-by Geert Uytterhoeven <[email protected]>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/r8a7790-lager.dts +6 -6
index 4118030f366dfa7d..59365bccc9450c6c 100644
@@ -355,7 +355,7 @@
 
 	phy-handle = <&phy1>;
 	renesas,ether-link-active-low;
-	status = "ok";
+	status = "okay";
 
 	phy1: ethernet-phy at 1 {
 		reg = <1>;

@@ -366,7 +366,7 @@
 };
 
 &cmt0 {
-	status = "ok";
+	status = "okay";
 };
 
 &mmcif1 {

@@ -470,17 +470,17 @@
 };
 
 &iic0	{
-	status = "ok";
+	status = "okay";
 };
 
 &iic1	{
-	status = "ok";
+	status = "okay";
 	pinctrl-0 = <&iic1_pins>;
 	pinctrl-names = "default";
 };
 
 &iic2	{
-	status = "ok";
+	status = "okay";
 	pinctrl-0 = <&iic2_pins>;
 	pinctrl-names = "default";
 

@@ -562,7 +562,7 @@
 	pinctrl-0 = <&vin1_pins>;
 	pinctrl-names = "default";
 
-	status = "ok";
+	status = "okay";
 
 	port {
 		#address-cells = <1>;
Signature · 1 line
1.9.1
author
#3 lore raw

PATCH 4/7 ARM: shmobile: henninger dts: Replace status value "ok" by "okay"

In reply to Geert Uytterhoeven

While the DT parsing code recognizes "ok" as a valid value for the "status" property, ePAPR v1.1 doesn't mention it in the list of valid values.

Signed-off-by Geert Uytterhoeven <[email protected]>
---
 arch/arm/boot/dts/r8a7791-henninger.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/r8a7791-henninger.dts +2 -2
index 740e38678032a7ac..d2ebf11f98814ab5 100644
@@ -156,7 +156,7 @@
 
 	phy-handle = <&phy1>;
 	renesas,ether-link-active-low;
-	status = "ok";
+	status = "okay";
 
 	phy1: ethernet-phy at 1 {
 		reg = <1>;

@@ -293,7 +293,7 @@
 
 /* composite video input */
 &vin0 {
-	status = "ok";
+	status = "okay";
 	pinctrl-0 = <&vin0_pins>;
 	pinctrl-names = "default";
Signature · 1 line
1.9.1
author
#4 lore raw

PATCH 5/7 ARM: shmobile: koelsch dts: Replace status value "ok" by "okay"

In reply to Geert Uytterhoeven

While the DT parsing code recognizes "ok" as a valid value for the "status" property, ePAPR v1.1 doesn't mention it in the list of valid values.

Signed-off-by Geert Uytterhoeven <[email protected]>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/r8a7791-koelsch.dts +3 -3
index a400c27a813f1a8b..18b8bff5d2e67421 100644
@@ -366,7 +366,7 @@
 
 	phy-handle = <&phy1>;
 	renesas,ether-link-active-low;
-	status = "ok";
+	status = "okay";
 
 	phy1: ethernet-phy at 1 {
 		reg = <1>;

@@ -377,7 +377,7 @@
 };
 
 &cmt0 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata0 {

@@ -570,7 +570,7 @@
 
 /* composite video input */
 &vin1 {
-	status = "ok";
+	status = "okay";
 	pinctrl-0 = <&vin1_pins>;
 	pinctrl-names = "default";
Signature · 1 line
1.9.1
author
#5 lore raw

PATCH 6/7 ARM: shmobile: alt dts: Replace status value "ok" by "okay"

In reply to Geert Uytterhoeven

While the DT parsing code recognizes "ok" as a valid value for the "status" property, ePAPR v1.1 doesn't mention it in the list of valid values.

Signed-off-by Geert Uytterhoeven <[email protected]>
---
 arch/arm/boot/dts/r8a7794-alt.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/r8a7794-alt.dts +2 -2
index f2cf7576bf3f5a0b..0d848e60507172ef 100644
@@ -40,9 +40,9 @@
 };
 
 &cmt0 {
-	status = "ok";
+	status = "okay";
 };
 
 &scif2 {
-	status = "ok";
+	status = "okay";
 };
Signature · 1 line
1.9.1
author
#6 lore raw

PATCH 7/7 ARM: shmobile: kzm9g-reference dts: Replace status value "ok" by "okay"

In reply to Geert Uytterhoeven

While the DT parsing code recognizes "ok" as a valid value for the "status" property, ePAPR v1.1 doesn't mention it in the list of valid values.

Signed-off-by Geert Uytterhoeven <[email protected]>
---
 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +1 -1
index 939be1299ca6ca34..863dc4c7d7f67762 100644
@@ -179,7 +179,7 @@
 };
 
 &cmt1 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
Signature · 1 line
1.9.1