USB: host: Misc patches to remove hard-coded octeon platform information

Acked-by Ralf Baechle <[email protected]>

http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1401358203-60225-4-git-send-email-alex.smith%40imgtec.com

---
 arch/mips/cavium-octeon/octeon-platform.c |  148 ++++++++++++-----------------
 drivers/usb/host/ehci-platform.c          |    1 +
 drivers/usb/host/ohci-platform.c          |    1 +
 3 files changed, 64 insertions(+), 86 deletions(-)

arch/mips/cavium-octeon/octeon-platform.c +62 ~~-86~~

index b67ddf0..eea60b6 100644
@@ -77,7 +77,7 @@ static DEFINE_MUTEX(octeon2_usb_clocks_mutex);
 
 static int octeon2_usb_clock_start_cnt;
 
-static void octeon2_usb_clocks_start(void)
+static void octeon2_usb_clocks_start(struct device *dev)
 {
 	u64 div;
 	union cvmx_uctlx_if_ena if_ena;

@@ -86,6 +86,8 @@ static void octeon2_usb_clocks_start(void)
 	union cvmx_uctlx_uphy_portx_ctl_status port_ctl_status;
 	int i;
 	unsigned long io_clk_64_to_ns;
+	u32 clock_rate = 12000000;
+	bool is_crystal_clock = false;
 
 
 	mutex_lock(&octeon2_usb_clocks_mutex);

@@ -96,6 +98,28 @@ static void octeon2_usb_clocks_start(void)
 
 	io_clk_64_to_ns = 64000000000ull / octeon_get_io_clock_rate();
 
+	if (dev->of_node) {
+		struct device_node *uctl_node;
+		const char *clock_type;
+
+		uctl_node = of_get_parent(dev->of_node);
+		if (!uctl_node) {
+			dev_err(dev, "No UCTL device node\n");
+			goto exit;
+		}
+		i = of_property_read_u32(uctl_node,
+					 "refclk-frequency", &clock_rate);
+		if (i) {
+			dev_err(dev, "No UCTL \"refclk-frequency\"\n");
+			goto exit;
+		}
+		i = of_property_read_string(uctl_node,
+					    "refclk-type", &clock_type);
+
+		if (!i && strcmp("crystal", clock_type) == 0)
+			is_crystal_clock = true;
+	}
+
 	/*
 	 * Step 1: Wait for voltages stable.  That surely happened
 	 * before starting the kernel.

@@ -126,9 +150,22 @@ static void octeon2_usb_clocks_start(void)
 	cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 
 	/* 3b */
-	/* 12MHz crystal. */
-	clk_rst_ctl.s.p_refclk_sel = 0;
-	clk_rst_ctl.s.p_refclk_div = 0;
+	clk_rst_ctl.s.p_refclk_sel = is_crystal_clock ? 0 : 1;
+	switch (clock_rate) {
+	default:
+		pr_err("Invalid UCTL clock rate of %u, using 12000000 instead\n",
+			clock_rate);
+		/* Fall through */
+	case 12000000:
+		clk_rst_ctl.s.p_refclk_div = 0;
+		break;
+	case 24000000:
+		clk_rst_ctl.s.p_refclk_div = 1;
+		break;
+	case 48000000:
+		clk_rst_ctl.s.p_refclk_div = 2;
+		break;
+	}
 	cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 
 	/* 3c */

@@ -259,7 +296,7 @@ static void octeon2_usb_clocks_stop(void)
 
 static int octeon_ehci_power_on(struct platform_device *pdev)
 {
-	octeon2_usb_clocks_start();
+	octeon2_usb_clocks_start(&pdev->dev);
 	return 0;
 }

@@ -277,11 +314,11 @@ static struct usb_ehci_pdata octeon_ehci_pdata = {
 	.power_off	= octeon_ehci_power_off,
 };
 
-static void __init octeon_ehci_hw_start(void)
+static void __init octeon_ehci_hw_start(struct device *dev)
 {
 	union cvmx_uctlx_ehci_ctl ehci_ctl;
 
-	octeon2_usb_clocks_start();
+	octeon2_usb_clocks_start(dev);
 
 	ehci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_EHCI_CTL(0));
 	/* Use 64-bit addressing. */

@@ -299,59 +336,28 @@ static u64 octeon_ehci_dma_mask = DMA_BIT_MASK(64);
 static int __init octeon_ehci_device_init(void)
 {
 	struct platform_device *pd;
+	struct device_node *ehci_node;
 	int ret = 0;
 
-	struct resource usb_resources[] = {
-		{
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-
-	/* Only Octeon2 has ehci/ohci */
-	if (!OCTEON_IS_MODEL(OCTEON_CN63XX))
+	ehci_node = of_find_node_by_name(NULL, "ehci");
+	if (!ehci_node)
 		return 0;
 
-	if (octeon_is_simulation() || usb_disabled())
-		return 0; /* No USB in the simulator. */
-
-	pd = platform_device_alloc("ehci-platform", 0);
-	if (!pd) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	usb_resources[0].start = 0x00016F0000000000ULL;
-	usb_resources[0].end = usb_resources[0].start + 0x100;
-
-	usb_resources[1].start = OCTEON_IRQ_USB0;
-	usb_resources[1].end = OCTEON_IRQ_USB0;
-
-	ret = platform_device_add_resources(pd, usb_resources,
-					    ARRAY_SIZE(usb_resources));
-	if (ret)
-		goto fail;
+	pd = of_find_device_by_node(ehci_node);
+	if (!pd)
+		return 0;
 
 	pd->dev.dma_mask = &octeon_ehci_dma_mask;
 	pd->dev.platform_data = &octeon_ehci_pdata;
-	octeon_ehci_hw_start();
-
-	ret = platform_device_add(pd);
-	if (ret)
-		goto fail;
+	octeon_ehci_hw_start(&pd->dev);
 
 	return ret;
-fail:
-	platform_device_put(pd);
-out:
-	return ret;
 }
 device_initcall(octeon_ehci_device_init);
 
 static int octeon_ohci_power_on(struct platform_device *pdev)
 {
-	octeon2_usb_clocks_start();
+	octeon2_usb_clocks_start(&pdev->dev);
 	return 0;
 }

@@ -369,11 +375,11 @@ static struct usb_ohci_pdata octeon_ohci_pdata = {
 	.power_off	= octeon_ohci_power_off,
 };
 
-static void __init octeon_ohci_hw_start(void)
+static void __init octeon_ohci_hw_start(struct device *dev)
 {
 	union cvmx_uctlx_ohci_ctl ohci_ctl;
 
-	octeon2_usb_clocks_start();
+	octeon2_usb_clocks_start(dev);
 
 	ohci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_OHCI_CTL(0));
 	ohci_ctl.s.l2c_addr_msb = 0;

@@ -387,57 +393,27 @@ static void __init octeon_ohci_hw_start(void)
 static int __init octeon_ohci_device_init(void)
 {
 	struct platform_device *pd;
+	struct device_node *ohci_node;
 	int ret = 0;
 
-	struct resource usb_resources[] = {
-		{
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-
-	/* Only Octeon2 has ehci/ohci */
-	if (!OCTEON_IS_MODEL(OCTEON_CN63XX))
+	ohci_node = of_find_node_by_name(NULL, "ohci");
+	if (!ohci_node)
 		return 0;
 
-	if (octeon_is_simulation() || usb_disabled())
-		return 0; /* No USB in the simulator. */
-
-	pd = platform_device_alloc("ohci-platform", 0);
-	if (!pd) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	usb_resources[0].start = 0x00016F0000000400ULL;
-	usb_resources[0].end = usb_resources[0].start + 0x100;
-
-	usb_resources[1].start = OCTEON_IRQ_USB0;
-	usb_resources[1].end = OCTEON_IRQ_USB0;
-
-	ret = platform_device_add_resources(pd, usb_resources,
-					    ARRAY_SIZE(usb_resources));
-	if (ret)
-		goto fail;
+	pd = of_find_device_by_node(ohci_node);
+	if (!pd)
+		return 0;
 
 	pd->dev.platform_data = &octeon_ohci_pdata;
-	octeon_ohci_hw_start();
-
-	ret = platform_device_add(pd);
-	if (ret)
-		goto fail;
+	octeon_ohci_hw_start(&pd->dev);
 
 	return ret;
-fail:
-	platform_device_put(pd);
-out:
-	return ret;
 }
 device_initcall(octeon_ohci_device_init);
 
 #endif /* CONFIG_USB */
 
+
 static struct of_device_id __initdata octeon_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "cavium,octeon-6335-uctl", },

drivers/usb/host/ehci-platform.c +1 -0

index 35a9aed..5b8533f 100644
@@ -349,6 +349,7 @@ static const struct of_device_id vt8500_ehci_ids[] = {
 	{ .compatible = "via,vt8500-ehci", },
 	{ .compatible = "wm,prizm-ehci", },
 	{ .compatible = "generic-ehci", },
+	{ .compatible = "cavium,octeon-6335-ehci", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);

drivers/usb/host/ohci-platform.c +1 -0

index 9434c1d..748a1a2 100644
@@ -328,6 +328,7 @@ static int ohci_platform_resume(struct device *dev)
 
 static const struct of_device_id ohci_platform_ids[] = {
 	{ .compatible = "generic-ohci", },
+	{ .compatible = "cavium,octeon-6335-ohci", },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ohci_platform_ids);

Signature · 1 line

1.7.9.5

Ralf Baechle

2014-12-15 16:04 UTC #2 lore raw

Re: [PATCH 1/2 resend] USB: host: Remove hard-coded octeon platform information for ehci/ohci

Quoted 4 lines · Andreas Herrmann

Instead rely on device tree information for ehci and ohci.
This was suggested with
http://www.linux-mips.org/archives/linux-mips/2014-05/msg00307.html

Please use the permanent link from that page:

The non-permanent links might change.

Ralf

Andreas Herrmann

author

2014-12-15 13:30 UTC #3 lore raw

PATCH RESEND 2/2 USB: host: Introduce flag to enable use of 64-bit dma_mask for ehci-platform

ehci-octeon driver used a 64-bit dma_mask. With removal of ehci-octeon and usage of ehci-platform ehci dma_mask is now limited to 32 bits (coerced in ehci_platform_probe).

Provide a flag in ehci platform data to allow use of 64 bits for dma_mask.

Cc David Daney <[email protected]>

Cc Alex Smith <[email protected]>

Cc Alan Stern <[email protected]>

---
 arch/mips/cavium-octeon/octeon-platform.c |    4 +---
 drivers/usb/host/ehci-platform.c          |    3 ++-
 include/linux/usb/ehci_pdriver.h          |    1 +
 3 files changed, 4 insertions(+), 4 deletions(-)

arch/mips/cavium-octeon/octeon-platform.c +1 -3

index eea60b6..12410a2 100644
@@ -310,6 +310,7 @@ static struct usb_ehci_pdata octeon_ehci_pdata = {
 #ifdef __BIG_ENDIAN
 	.big_endian_mmio	= 1,
 #endif
+	.dma_mask_64	= 1,
 	.power_on	= octeon_ehci_power_on,
 	.power_off	= octeon_ehci_power_off,
 };

@@ -331,8 +332,6 @@ static void __init octeon_ehci_hw_start(struct device *dev)
 	octeon2_usb_clocks_stop();
 }
 
-static u64 octeon_ehci_dma_mask = DMA_BIT_MASK(64);
-
 static int __init octeon_ehci_device_init(void)
 {
 	struct platform_device *pd;

@@ -347,7 +346,6 @@ static int __init octeon_ehci_device_init(void)
 	if (!pd)
 		return 0;
 
-	pd->dev.dma_mask = &octeon_ehci_dma_mask;
 	pd->dev.platform_data = &octeon_ehci_pdata;
 	octeon_ehci_hw_start(&pd->dev);

drivers/usb/host/ehci-platform.c +2 -1

index 5b8533f..37abbe2 100644
@@ -155,7 +155,8 @@ static int ehci_platform_probe(struct platform_device *dev)
 	if (!pdata)
 		pdata = &ehci_platform_defaults;
 
-	err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+	err = dma_coerce_mask_and_coherent(&dev->dev,
+		pdata->dma_mask_64 ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32));
 	if (err)
 		return err;

include/linux/usb/ehci_pdriver.h +1 -0

index 7eb4dcd..f69529e 100644
@@ -45,6 +45,7 @@ struct usb_ehci_pdata {
 	unsigned	big_endian_desc:1;
 	unsigned	big_endian_mmio:1;
 	unsigned	no_io_watchdog:1;
+	unsigned	dma_mask_64:1;
 
 	/* Turn on all power and clocks */
 	int (*power_on)(struct platform_device *pdev);

Signature · 1 line

1.7.9.5

Greg KH

2014-12-15 16:36 UTC #4 lore raw

Quoted 5 lines · Andreas Herrmann

This is a re-submission of patches 2 and 3 from
http://marc.info/?i=1415914590-31647-1-git-send-email-andreas.herrmann@caviumnetworks.com
(Only patch 1/3 made it into usb-next and meanwhile is in mainline.)
Please apply.

I'll get to patches after 3.19-rc1 is out, can't do anything with my trees until then, sorry.

greg k-h

Andreas Herrmann

author

2015-01-06 12:47 UTC #5 lore raw

v2 cover USB: host: Misc patches to remove hard-coded octeon platform information

Please apply.

Thanks,

Andreas

PS: It's v2 as with last submission I hit the merge window.
Patches are rebased to v3.19-rc2.
Only change is usage of a permanent link for the mail referenced in commit message of patch 2/2.

Andreas Herrmann

author

2015-01-06 12:49 UTC #6 lore raw

PATCH RESEND v2 1/2 USB: host: Remove hard-coded octeon platform information for ehci/ohci

Instead rely on device tree information for ehci and ohci.

"The device tree will *always* have correct ehci/ohci clock configuration, so use it. This allows us to remove a big chunk of platform configuration code from octeon-platform.c."

More or less I rebased that patch on Alan's work to remove ehci-octeon and ohci-octeon drivers.

Cc David Daney <[email protected]>

Cc Alex Smith <[email protected]>

Cc Alan Stern <[email protected]>

Acked-by Ralf Baechle <[email protected]>

---
 arch/mips/cavium-octeon/octeon-platform.c |  148 ++++++++++++-----------------
 drivers/usb/host/ehci-platform.c          |    1 +
 drivers/usb/host/ohci-platform.c          |    1 +
 3 files changed, 64 insertions(+), 86 deletions(-)

arch/mips/cavium-octeon/octeon-platform.c +62 ~~-86~~

index b67ddf0..eea60b6 100644
@@ -77,7 +77,7 @@ static DEFINE_MUTEX(octeon2_usb_clocks_mutex);
 
 static int octeon2_usb_clock_start_cnt;
 
-static void octeon2_usb_clocks_start(void)
+static void octeon2_usb_clocks_start(struct device *dev)
 {
 	u64 div;
 	union cvmx_uctlx_if_ena if_ena;

@@ -86,6 +86,8 @@ static void octeon2_usb_clocks_start(void)
 	union cvmx_uctlx_uphy_portx_ctl_status port_ctl_status;
 	int i;
 	unsigned long io_clk_64_to_ns;
+	u32 clock_rate = 12000000;
+	bool is_crystal_clock = false;
 
 
 	mutex_lock(&octeon2_usb_clocks_mutex);

@@ -96,6 +98,28 @@ static void octeon2_usb_clocks_start(void)
 
 	io_clk_64_to_ns = 64000000000ull / octeon_get_io_clock_rate();
 
+	if (dev->of_node) {
+		struct device_node *uctl_node;
+		const char *clock_type;
+
+		uctl_node = of_get_parent(dev->of_node);
+		if (!uctl_node) {
+			dev_err(dev, "No UCTL device node\n");
+			goto exit;
+		}
+		i = of_property_read_u32(uctl_node,
+					 "refclk-frequency", &clock_rate);
+		if (i) {
+			dev_err(dev, "No UCTL \"refclk-frequency\"\n");
+			goto exit;
+		}
+		i = of_property_read_string(uctl_node,
+					    "refclk-type", &clock_type);
+
+		if (!i && strcmp("crystal", clock_type) == 0)
+			is_crystal_clock = true;
+	}
+
 	/*
 	 * Step 1: Wait for voltages stable.  That surely happened
 	 * before starting the kernel.

@@ -126,9 +150,22 @@ static void octeon2_usb_clocks_start(void)
 	cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 
 	/* 3b */
-	/* 12MHz crystal. */
-	clk_rst_ctl.s.p_refclk_sel = 0;
-	clk_rst_ctl.s.p_refclk_div = 0;
+	clk_rst_ctl.s.p_refclk_sel = is_crystal_clock ? 0 : 1;
+	switch (clock_rate) {
+	default:
+		pr_err("Invalid UCTL clock rate of %u, using 12000000 instead\n",
+			clock_rate);
+		/* Fall through */
+	case 12000000:
+		clk_rst_ctl.s.p_refclk_div = 0;
+		break;
+	case 24000000:
+		clk_rst_ctl.s.p_refclk_div = 1;
+		break;
+	case 48000000:
+		clk_rst_ctl.s.p_refclk_div = 2;
+		break;
+	}
 	cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 
 	/* 3c */

@@ -259,7 +296,7 @@ static void octeon2_usb_clocks_stop(void)
 
 static int octeon_ehci_power_on(struct platform_device *pdev)
 {
-	octeon2_usb_clocks_start();
+	octeon2_usb_clocks_start(&pdev->dev);
 	return 0;
 }

@@ -277,11 +314,11 @@ static struct usb_ehci_pdata octeon_ehci_pdata = {
 	.power_off	= octeon_ehci_power_off,
 };
 
-static void __init octeon_ehci_hw_start(void)
+static void __init octeon_ehci_hw_start(struct device *dev)
 {
 	union cvmx_uctlx_ehci_ctl ehci_ctl;
 
-	octeon2_usb_clocks_start();
+	octeon2_usb_clocks_start(dev);
 
 	ehci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_EHCI_CTL(0));
 	/* Use 64-bit addressing. */

@@ -299,59 +336,28 @@ static u64 octeon_ehci_dma_mask = DMA_BIT_MASK(64);
 static int __init octeon_ehci_device_init(void)
 {
 	struct platform_device *pd;
+	struct device_node *ehci_node;
 	int ret = 0;
 
-	struct resource usb_resources[] = {
-		{
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-
-	/* Only Octeon2 has ehci/ohci */
-	if (!OCTEON_IS_MODEL(OCTEON_CN63XX))
+	ehci_node = of_find_node_by_name(NULL, "ehci");
+	if (!ehci_node)
 		return 0;
 
-	if (octeon_is_simulation() || usb_disabled())
-		return 0; /* No USB in the simulator. */
-
-	pd = platform_device_alloc("ehci-platform", 0);
-	if (!pd) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	usb_resources[0].start = 0x00016F0000000000ULL;
-	usb_resources[0].end = usb_resources[0].start + 0x100;
-
-	usb_resources[1].start = OCTEON_IRQ_USB0;
-	usb_resources[1].end = OCTEON_IRQ_USB0;
-
-	ret = platform_device_add_resources(pd, usb_resources,
-					    ARRAY_SIZE(usb_resources));
-	if (ret)
-		goto fail;
+	pd = of_find_device_by_node(ehci_node);
+	if (!pd)
+		return 0;
 
 	pd->dev.dma_mask = &octeon_ehci_dma_mask;
 	pd->dev.platform_data = &octeon_ehci_pdata;
-	octeon_ehci_hw_start();
-
-	ret = platform_device_add(pd);
-	if (ret)
-		goto fail;
+	octeon_ehci_hw_start(&pd->dev);
 
 	return ret;
-fail:
-	platform_device_put(pd);
-out:
-	return ret;
 }
 device_initcall(octeon_ehci_device_init);
 
 static int octeon_ohci_power_on(struct platform_device *pdev)
 {
-	octeon2_usb_clocks_start();
+	octeon2_usb_clocks_start(&pdev->dev);
 	return 0;
 }

@@ -369,11 +375,11 @@ static struct usb_ohci_pdata octeon_ohci_pdata = {
 	.power_off	= octeon_ohci_power_off,
 };
 
-static void __init octeon_ohci_hw_start(void)
+static void __init octeon_ohci_hw_start(struct device *dev)
 {
 	union cvmx_uctlx_ohci_ctl ohci_ctl;
 
-	octeon2_usb_clocks_start();
+	octeon2_usb_clocks_start(dev);
 
 	ohci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_OHCI_CTL(0));
 	ohci_ctl.s.l2c_addr_msb = 0;

@@ -387,57 +393,27 @@ static void __init octeon_ohci_hw_start(void)
 static int __init octeon_ohci_device_init(void)
 {
 	struct platform_device *pd;
+	struct device_node *ohci_node;
 	int ret = 0;
 
-	struct resource usb_resources[] = {
-		{
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-
-	/* Only Octeon2 has ehci/ohci */
-	if (!OCTEON_IS_MODEL(OCTEON_CN63XX))
+	ohci_node = of_find_node_by_name(NULL, "ohci");
+	if (!ohci_node)
 		return 0;
 
-	if (octeon_is_simulation() || usb_disabled())
-		return 0; /* No USB in the simulator. */
-
-	pd = platform_device_alloc("ohci-platform", 0);
-	if (!pd) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	usb_resources[0].start = 0x00016F0000000400ULL;
-	usb_resources[0].end = usb_resources[0].start + 0x100;
-
-	usb_resources[1].start = OCTEON_IRQ_USB0;
-	usb_resources[1].end = OCTEON_IRQ_USB0;
-
-	ret = platform_device_add_resources(pd, usb_resources,
-					    ARRAY_SIZE(usb_resources));
-	if (ret)
-		goto fail;
+	pd = of_find_device_by_node(ohci_node);
+	if (!pd)
+		return 0;
 
 	pd->dev.platform_data = &octeon_ohci_pdata;
-	octeon_ohci_hw_start();
-
-	ret = platform_device_add(pd);
-	if (ret)
-		goto fail;
+	octeon_ohci_hw_start(&pd->dev);
 
 	return ret;
-fail:
-	platform_device_put(pd);
-out:
-	return ret;
 }
 device_initcall(octeon_ohci_device_init);
 
 #endif /* CONFIG_USB */
 
+
 static struct of_device_id __initdata octeon_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "cavium,octeon-6335-uctl", },

drivers/usb/host/ehci-platform.c +1 -0

index 8557803..29b244c 100644
@@ -349,6 +349,7 @@ static const struct of_device_id vt8500_ehci_ids[] = {
 	{ .compatible = "via,vt8500-ehci", },
 	{ .compatible = "wm,prizm-ehci", },
 	{ .compatible = "generic-ehci", },
+	{ .compatible = "cavium,octeon-6335-ehci", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);

drivers/usb/host/ohci-platform.c +1 -0

index b81d202..9c06b01 100644
@@ -328,6 +328,7 @@ static int ohci_platform_resume(struct device *dev)
 
 static const struct of_device_id ohci_platform_ids[] = {
 	{ .compatible = "generic-ohci", },
+	{ .compatible = "cavium,octeon-6335-ohci", },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ohci_platform_ids);

Signature · 1 line

1.7.9.5

Andreas Herrmann

author

2015-01-06 12:50 UTC #7 lore raw

PATCH RESEND v2 2/2 USB: host: Introduce flag to enable use of 64-bit dma_mask for ehci-platform

ehci-octeon driver used a 64-bit dma_mask. With removal of ehci-octeon and usage of ehci-platform ehci dma_mask is now limited to 32 bits (coerced in ehci_platform_probe).

Provide a flag in ehci platform data to allow use of 64 bits for dma_mask.

Cc David Daney <[email protected]>

Cc Alex Smith <[email protected]>

Cc Alan Stern <[email protected]>

---
 arch/mips/cavium-octeon/octeon-platform.c |    4 +---
 drivers/usb/host/ehci-platform.c          |    3 ++-
 include/linux/usb/ehci_pdriver.h          |    1 +
 3 files changed, 4 insertions(+), 4 deletions(-)

arch/mips/cavium-octeon/octeon-platform.c +1 -3

index eea60b6..12410a2 100644
@@ -310,6 +310,7 @@ static struct usb_ehci_pdata octeon_ehci_pdata = {
 #ifdef __BIG_ENDIAN
 	.big_endian_mmio	= 1,
 #endif
+	.dma_mask_64	= 1,
 	.power_on	= octeon_ehci_power_on,
 	.power_off	= octeon_ehci_power_off,
 };

@@ -331,8 +332,6 @@ static void __init octeon_ehci_hw_start(struct device *dev)
 	octeon2_usb_clocks_stop();
 }
 
-static u64 octeon_ehci_dma_mask = DMA_BIT_MASK(64);
-
 static int __init octeon_ehci_device_init(void)
 {
 	struct platform_device *pd;

@@ -347,7 +346,6 @@ static int __init octeon_ehci_device_init(void)
 	if (!pd)
 		return 0;
 
-	pd->dev.dma_mask = &octeon_ehci_dma_mask;
 	pd->dev.platform_data = &octeon_ehci_pdata;
 	octeon_ehci_hw_start(&pd->dev);

drivers/usb/host/ehci-platform.c +2 -1

index 29b244c..75631b9 100644
@@ -155,7 +155,8 @@ static int ehci_platform_probe(struct platform_device *dev)
 	if (!pdata)
 		pdata = &ehci_platform_defaults;
 
-	err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+	err = dma_coerce_mask_and_coherent(&dev->dev,
+		pdata->dma_mask_64 ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32));
 	if (err)
 		return err;

include/linux/usb/ehci_pdriver.h +1 -0

index 7eb4dcd..f69529e 100644
@@ -45,6 +45,7 @@ struct usb_ehci_pdata {
 	unsigned	big_endian_desc:1;
 	unsigned	big_endian_mmio:1;
 	unsigned	no_io_watchdog:1;
+	unsigned	dma_mask_64:1;
 
 	/* Turn on all power and clocks */
 	int (*power_on)(struct platform_device *pdev);

Signature · 1 line

1.7.9.5

Alan Stern

maintainer Acked-by on v2 2/2

2015-01-06 15:49 UTC #8 lore raw

Re: [PATCH 2/2 resend v2] USB: host: Introduce flag to enable use of 64-bit dma_mask for ehci-platform

Quoted 4 lines · Andreas Herrmann

ehci-octeon driver used a 64-bit dma_mask. With removal of ehci-octeon and usage of ehci-platform ehci dma_mask is now limited to 32 bits (coerced in ehci_platform_probe).

Quoted 8 lines

Provide a flag in ehci platform data to allow use of 64 bits for dma_mask.
Cc David Daney <[email protected]>
Cc Alex Smith <[email protected]>
Cc Alan Stern <[email protected]>
Signed-off-by Andreas Herrmann <[email protected]>
Tested-by Aaro Koskinen <[email protected]>

Acked-by Alan Stern <[email protected]>

Is something like this also needed for ohci-platform? Or are all OHCI implementations restricted to 32-bit DMA masks?

Alan Stern

Andreas Herrmann

author

2015-01-07 11:13 UTC #9 lore raw

Re: [PATCH 2/2 resend v2] USB: host: Introduce flag to enable use of 64-bit dma_mask for ehci-platform

Quoted 15 lines · Alan Stern

Quoted 4 lines · Andreas Herrmann
ehci-octeon driver used a 64-bit dma_mask. With removal of ehci-octeon and usage of ehci-platform ehci dma_mask is now limited to 32 bits (coerced in ehci_platform_probe).
Quoted 8 lines
Provide a flag in ehci platform data to allow use of 64 bits for dma_mask.
Cc David Daney <[email protected]>
Cc Alex Smith <[email protected]>
Cc Alan Stern <[email protected]>
Signed-off-by Andreas Herrmann <[email protected]>
Tested-by Aaro Koskinen <[email protected]>

Quoted 3 lines

Acked-by Alan Stern <[email protected]>
Is something like this also needed for ohci-platform?

No, I don't think so.

Quoted 1 line

Or are all OHCI implementations restricted to 32-bit DMA masks?

AFAIK OHCI supports only 32-bit memory addressing.

Quoted 1 line

Alan Stern

Andreas

Greg KH

maintainer

2015-01-09 20:30 UTC #10 lore raw

Re: [PATCH 2/2 resend v2] USB: host: Introduce flag to enable use of 64-bit dma_mask for ehci-platform

Quoted 12 lines · Andreas Herrmann

ehci-octeon driver used a 64-bit dma_mask. With removal of ehci-octeon and usage of ehci-platform ehci dma_mask is now limited to 32 bits (coerced in ehci_platform_probe).
Provide a flag in ehci platform data to allow use of 64 bits for dma_mask.
Cc David Daney <[email protected]>
Cc Alex Smith <[email protected]>
Signed-off-by Andreas Herrmann <[email protected]>
Tested-by Aaro Koskinen <[email protected]>
Acked-by Alan Stern <[email protected]>

Quoted 5 lines

---
 arch/mips/cavium-octeon/octeon-platform.c |    4 +---
 drivers/usb/host/ehci-platform.c          |    3 ++-
 include/linux/usb/ehci_pdriver.h          |    1 +
 3 files changed, 4 insertions(+), 4 deletions(-)

This no longer applies to my usb-testing branch, can you refresh it and resend?

thanks,

greg k-h

Andreas Herrmann

author

2015-01-12 15:06 UTC #11 lore raw

PATCH RESEND v3 1/1 USB: host: Introduce flag to enable use of 64-bit dma_mask for ehci-platform

ehci-octeon driver used a 64-bit dma_mask. With removal of ehci-octeon and usage of ehci-platform ehci dma_mask is now limited to 32 bits (coerced in ehci_platform_probe).

Provide a flag in ehci platform data to allow use of 64 bits for dma_mask.

Cc David Daney <[email protected]>

Cc Alex Smith <[email protected]>

Acked-by Alan Stern <[email protected]>

---
 arch/mips/cavium-octeon/octeon-platform.c |    4 +---
 drivers/usb/host/ehci-platform.c          |    3 ++-
 include/linux/usb/ehci_pdriver.h          |    1 +
 3 files changed, 4 insertions(+), 4 deletions(-)

Patch rebased on usb-testing as of v3.19-rc2-21-g1d97869.

Thanks,

Andreas

arch/mips/cavium-octeon/octeon-platform.c +1 -3

index eea60b6..12410a2 100644
@@ -310,6 +310,7 @@ static struct usb_ehci_pdata octeon_ehci_pdata = {
 #ifdef __BIG_ENDIAN
 	.big_endian_mmio	= 1,
 #endif
+	.dma_mask_64	= 1,
 	.power_on	= octeon_ehci_power_on,
 	.power_off	= octeon_ehci_power_off,
 };

@@ -331,8 +332,6 @@ static void __init octeon_ehci_hw_start(struct device *dev)
 	octeon2_usb_clocks_stop();
 }
 
-static u64 octeon_ehci_dma_mask = DMA_BIT_MASK(64);
-
 static int __init octeon_ehci_device_init(void)
 {
 	struct platform_device *pd;

@@ -347,7 +346,6 @@ static int __init octeon_ehci_device_init(void)
 	if (!pd)
 		return 0;
 
-	pd->dev.dma_mask = &octeon_ehci_dma_mask;
 	pd->dev.platform_data = &octeon_ehci_pdata;
 	octeon_ehci_hw_start(&pd->dev);

drivers/usb/host/ehci-platform.c +2 -1

index 28aae64..63f2622 100644
@@ -155,7 +155,8 @@ static int ehci_platform_probe(struct platform_device *dev)
 	if (!pdata)
 		pdata = &ehci_platform_defaults;
 
-	err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+	err = dma_coerce_mask_and_coherent(&dev->dev,
+		pdata->dma_mask_64 ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32));
 	if (err)
 		return err;

include/linux/usb/ehci_pdriver.h +1 -0

index 6287b39..db0431b 100644
@@ -48,6 +48,7 @@ struct usb_ehci_pdata {
 	unsigned	big_endian_mmio:1;
 	unsigned	no_io_watchdog:1;
 	unsigned	reset_on_resume:1;
+	unsigned	dma_mask_64:1;
 
 	/* Turn on all power and clocks */
 	int (*power_on)(struct platform_device *pdev);

Signature · 1 line

1.7.9.5

Andreas Herrmann

author

2015-01-06 12:52 UTC #12 lore raw