mfd/axp20x: add support for fuel gauge cell driver
PATCH 2/3 mfd/axp20x: add support for fuel gauge cell driver
mfd/axp20x: add support for fuel gauge cell
Register definitions and platform data structure
for fuel gauge cell devices.
Signed-off-by Todd Brandt <[email protected]>
----
include/linux/mfd/axp20x.h | 43 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 41 insertions(+), 2 deletions(-)
include/linux/mfd/axp20x.h +41 -2
@@ -124,10 +124,27 @@ enum {#define AXP288_PMIC_ADC_H 0x56#define AXP288_PMIC_ADC_L 0x57#define AXP288_ADC_TS_PIN_CTRL 0x84 -#define AXP288_PMIC_ADC_EN 0x84 -#define AXP288_FG_TUNE5 0xed +/* Fuel Gauge */ +#define AXP288_FG_RDC1_REG 0xba +#define AXP288_FG_RDC0_REG 0xbb +#define AXP288_FG_OCVH_REG 0xbc +#define AXP288_FG_OCVL_REG 0xbd +#define AXP288_FG_OCV_CURVE_REG 0xc0 +#define AXP288_FG_DES_CAP1_REG 0xe0 +#define AXP288_FG_DES_CAP0_REG 0xe1 +#define AXP288_FG_CC_MTR1_REG 0xe2 +#define AXP288_FG_CC_MTR0_REG 0xe3 +#define AXP288_FG_OCV_CAP_REG 0xe4 +#define AXP288_FG_CC_CAP_REG 0xe5 +#define AXP288_FG_LOW_CAP_REG 0xe6 +#define AXP288_FG_TUNE0 0xe8 +#define AXP288_FG_TUNE1 0xe9 +#define AXP288_FG_TUNE2 0xea +#define AXP288_FG_TUNE3 0xeb +#define AXP288_FG_TUNE4 0xec +#define AXP288_FG_TUNE5 0xed/* Regulators IDs */ enum {
@@ -236,4 +253,26 @@ struct axp20x_dev { const struct regmap_irq_chip *regmap_irq_chip; }; +#define BATTID_LEN 64 +#define OCV_CURVE_SIZE 32 +#define MAX_THERM_CURVE_SIZE 25 +#define PD_DEF_MIN_TEMP 0 +#define PD_DEF_MAX_TEMP 55 + +struct axp20x_fg_pdata { +char battid[BATTID_LEN +1 ]; +int design_cap; +int min_volt; +int max_volt; +int max_temp; +int min_temp; +int cap1; +int cap0; +int rdc1; +int rdc0; +int ocv_curve[OCV_CURVE_SIZE ]; +int tcsz; +int thermistor_curve[MAX_THERM_CURVE_SIZE ][2 ]; +}; +#endif /* __LINUX_MFD_AXP20X_H */
Quoted 2 lines · On Wed, 7 Jan 2015 13:25:52 -0800 Todd E Brandt…
mfd/axp20x: add support for fuel gauge cell
Quoted 60 lines
Register definitions and platform data structure
for fuel gauge cell devices.Signed-off-by Todd Brandt <[email protected]>----
include/linux/mfd/axp20x.h | 43+++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 41 insertions(+), 2 deletions(-)
include/linux/mfd/axp20x.h +32
-2@@ -124,10 +124,27 @@ enum {#define AXP288_PMIC_ADC_H 0x56#define AXP288_PMIC_ADC_L 0x57#define AXP288_ADC_TS_PIN_CTRL 0x84 -#define AXP288_PMIC_ADC_EN 0x84 -#define AXP288_FG_TUNE5 0xed +/* Fuel Gauge */ +#define AXP288_FG_RDC1_REG 0xba +#define AXP288_FG_RDC0_REG 0xbb +#define AXP288_FG_OCVH_REG 0xbc +#define AXP288_FG_OCVL_REG 0xbd +#define AXP288_FG_OCV_CURVE_REG 0xc0 +#define AXP288_FG_DES_CAP1_REG 0xe0 +#define AXP288_FG_DES_CAP0_REG 0xe1 +#define AXP288_FG_CC_MTR1_REG 0xe2 +#define AXP288_FG_CC_MTR0_REG 0xe3 +#define AXP288_FG_OCV_CAP_REG 0xe4 +#define AXP288_FG_CC_CAP_REG 0xe5 +#define AXP288_FG_LOW_CAP_REG 0xe6 +#define AXP288_FG_TUNE0 0xe8 +#define AXP288_FG_TUNE1 0xe9 +#define AXP288_FG_TUNE2 0xea +#define AXP288_FG_TUNE3 0xeb +#define AXP288_FG_TUNE4 0xec +#define AXP288_FG_TUNE5 0xed/* Regulators IDs */ enum {@@ -236,4 +253,26 @@ struct axp20x_dev {const struct regmap_irq_chip *regmap_irq_chip; }; +#define BATTID_LEN 64 +#define OCV_CURVE_SIZE 32 +#define MAX_THERM_CURVE_SIZE 25 +#define PD_DEF_MIN_TEMP 0 +#define PD_DEF_MAX_TEMP 55 + +struct axp20x_fg_pdata { +char battid[BATTID_LEN +1 ]; +int design_cap; +int min_volt; +int max_volt; +int max_temp; +int min_temp;
include/linux/mfd/axp20x.h struct axp20x_dev { · line 278
Quoted 10 lines
include/linux/mfd/axp20x.h +9
-0+int cap1; +int cap0; +int rdc1; +int rdc0; +int ocv_curve[OCV_CURVE_SIZE ]; +int tcsz; + int thermistor_curve[MAX_THERM_CURVE_SIZE][2]; +}; +#endif /* __LINUX_MFD_AXP20X_H */
[Jacob Pan]
Lee Jones
AppliedFYI: It's easier to track patch-sets when they are connected. Please send them as 'threaded'. Take a look at the man page for git send-email for more details.
Quoted 9 lines
mfd/axp20x: add support for fuel gauge cell
Register definitions and platform data structure
for fuel gauge cell devices.Signed-off-by Todd Brandt <[email protected]>----
include/linux/mfd/axp20x.h | 43 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 41 insertions(+), 2 deletions(-)
Applied, thanks.
Quoted 61 lines
include/linux/mfd/axp20x.h +41
-2@@ -124,10 +124,27 @@ enum {#define AXP288_PMIC_ADC_H 0x56#define AXP288_PMIC_ADC_L 0x57#define AXP288_ADC_TS_PIN_CTRL 0x84 -#define AXP288_PMIC_ADC_EN 0x84 -#define AXP288_FG_TUNE5 0xed +/* Fuel Gauge */ +#define AXP288_FG_RDC1_REG 0xba +#define AXP288_FG_RDC0_REG 0xbb +#define AXP288_FG_OCVH_REG 0xbc +#define AXP288_FG_OCVL_REG 0xbd +#define AXP288_FG_OCV_CURVE_REG 0xc0 +#define AXP288_FG_DES_CAP1_REG 0xe0 +#define AXP288_FG_DES_CAP0_REG 0xe1 +#define AXP288_FG_CC_MTR1_REG 0xe2 +#define AXP288_FG_CC_MTR0_REG 0xe3 +#define AXP288_FG_OCV_CAP_REG 0xe4 +#define AXP288_FG_CC_CAP_REG 0xe5 +#define AXP288_FG_LOW_CAP_REG 0xe6 +#define AXP288_FG_TUNE0 0xe8 +#define AXP288_FG_TUNE1 0xe9 +#define AXP288_FG_TUNE2 0xea +#define AXP288_FG_TUNE3 0xeb +#define AXP288_FG_TUNE4 0xec +#define AXP288_FG_TUNE5 0xed/* Regulators IDs */ enum {@@ -236,4 +253,26 @@ struct axp20x_dev { const struct regmap_irq_chip *regmap_irq_chip; }; +#define BATTID_LEN 64 +#define OCV_CURVE_SIZE 32 +#define MAX_THERM_CURVE_SIZE 25 +#define PD_DEF_MIN_TEMP 0 +#define PD_DEF_MAX_TEMP 55 + +struct axp20x_fg_pdata { +char battid[BATTID_LEN +1 ]; +int design_cap; +int min_volt; +int max_volt; +int max_temp; +int min_temp; +int cap1; +int cap0; +int rdc1; +int rdc0; +int ocv_curve[OCV_CURVE_SIZE ]; +int tcsz; +int thermistor_curve[MAX_THERM_CURVE_SIZE ][2 ]; +}; +#endif /* __LINUX_MFD_AXP20X_H */
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog