Skip to contentSkip to conversation

ARM: dts: am57xx-beagle-x15: Add dual ethernet

PATCH New Felipe Balbi 3 participants 6 messages Dec 4, 2014 – Jan 7, 2015 Device tree bindings

lore
Share & tools
lore

Felipe Balbi

author
#0 lore raw

PATCH 1/1 ARM: dts: am57xx-beagle-x15: Add dual ethernet

Make CPSW work - BeagleBoard-X15 has two network ports

MUX_MODE15 means "driver off". Pins are turned off conserving more power.

Signed-off-by Felipe Balbi <[email protected]>
Signed-off-by Nishanth Menon <[email protected]>
Signed-off-by Sekhar Nori <[email protected]>
Signed-off-by Felipe Balbi <[email protected]>
---
 arch/arm/boot/dts/am57xx-beagle-x15.dts | 106 ++++++++++++++++++++++++++++++++
 1 file changed, 106 insertions(+)
arch/arm/boot/dts/am57xx-beagle-x15.dts +106 -0
index 49edbda..da1b24c 100644
@@ -140,6 +140,86 @@
 		>;
 	};
 
+	cpsw_pins_default: cpsw_pins_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
+			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
+			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
+			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
+			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
+			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
+			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
+			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
+			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
+			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
+			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
+			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
+			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
+			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
+			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
+			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
+			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
+			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
+			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
+			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
+			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
+			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
+			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
+		>;
+
+	};
+
+	cpsw_pins_sleep: cpsw_pins_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_INPUT | MUX_MODE15)
+			0x254 (PIN_INPUT | MUX_MODE15)
+			0x258 (PIN_INPUT | MUX_MODE15)
+			0x25c (PIN_INPUT | MUX_MODE15)
+			0x260 (PIN_INPUT | MUX_MODE15)
+			0x264 (PIN_INPUT | MUX_MODE15)
+			0x268 (PIN_INPUT | MUX_MODE15)
+			0x26c (PIN_INPUT | MUX_MODE15)
+			0x270 (PIN_INPUT | MUX_MODE15)
+			0x274 (PIN_INPUT | MUX_MODE15)
+			0x278 (PIN_INPUT | MUX_MODE15)
+			0x27c (PIN_INPUT | MUX_MODE15)
+
+			/* Slave 1 */
+			0x198 (PIN_INPUT | MUX_MODE15)
+			0x19c (PIN_INPUT | MUX_MODE15)
+			0x1a0 (PIN_INPUT | MUX_MODE15)
+			0x1a4 (PIN_INPUT | MUX_MODE15)
+			0x1a8 (PIN_INPUT | MUX_MODE15)
+			0x1ac (PIN_INPUT | MUX_MODE15)
+			0x1b0 (PIN_INPUT | MUX_MODE15)
+			0x1b4 (PIN_INPUT | MUX_MODE15)
+			0x1b8 (PIN_INPUT | MUX_MODE15)
+			0x1bc (PIN_INPUT | MUX_MODE15)
+			0x1c0 (PIN_INPUT | MUX_MODE15)
+			0x1c4 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_pins_default: davinci_mdio_pins_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
+			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
+		>;
+	};
+
+	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			0x23c (PIN_INPUT | MUX_MODE15)
+			0x240 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
 	tps659038_pins_default: tps659038_pins_default {
 		pinctrl-single,pins = <
 			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */

@@ -365,6 +445,32 @@
 	pinctrl-0 = <&uart3_pins_default>;
 };
 
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_pins_default>;
+	pinctrl-1 = <&cpsw_pins_sleep>;
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_pins_default>;
+	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
 &mmc1 {
 	status = "okay";
Signature · 1 line
2.1.0.GIT
author
#1 lore raw

PATCH 1/1 ARM: dts: am57xx-beagle-x15: Add dual ethernet

Quoted 9 lines · Felipe Balbi

Make CPSW work - BeagleBoard-X15 has two network ports

MUX_MODE15 means "driver off". Pins are turned off conserving more power.

Signed-off-by Felipe Balbi <[email protected]>
Signed-off-by Nishanth Menon <[email protected]>
Signed-off-by Sekhar Nori <[email protected]>
Signed-off-by Felipe Balbi <[email protected]>

grrr, not sure why it signed again... I guess git cherry-pick -s isn't very smart after all. Tony, let me know if you prefer that I resend fixing this SoB detail. In any case:

boot logs http://hastebin.com/joxiweleyi

Quoted 131 lines
---
 arch/arm/boot/dts/am57xx-beagle-x15.dts | 106 ++++++++++++++++++++++++++++++++
 1 file changed, 106 insertions(+)
arch/arm/boot/dts/am57xx-beagle-x15.dts +106 -0
index 49edbda..da1b24c 100644
@@ -140,6 +140,86 @@
 		>;
 	};
 
+	cpsw_pins_default: cpsw_pins_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
+			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
+			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
+			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
+			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
+			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
+			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
+			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
+			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
+			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
+			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
+			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
+			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
+			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
+			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
+			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
+			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
+			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
+			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
+			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
+			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
+			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
+			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
+		>;
+
+	};
+
+	cpsw_pins_sleep: cpsw_pins_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_INPUT | MUX_MODE15)
+			0x254 (PIN_INPUT | MUX_MODE15)
+			0x258 (PIN_INPUT | MUX_MODE15)
+			0x25c (PIN_INPUT | MUX_MODE15)
+			0x260 (PIN_INPUT | MUX_MODE15)
+			0x264 (PIN_INPUT | MUX_MODE15)
+			0x268 (PIN_INPUT | MUX_MODE15)
+			0x26c (PIN_INPUT | MUX_MODE15)
+			0x270 (PIN_INPUT | MUX_MODE15)
+			0x274 (PIN_INPUT | MUX_MODE15)
+			0x278 (PIN_INPUT | MUX_MODE15)
+			0x27c (PIN_INPUT | MUX_MODE15)
+
+			/* Slave 1 */
+			0x198 (PIN_INPUT | MUX_MODE15)
+			0x19c (PIN_INPUT | MUX_MODE15)
+			0x1a0 (PIN_INPUT | MUX_MODE15)
+			0x1a4 (PIN_INPUT | MUX_MODE15)
+			0x1a8 (PIN_INPUT | MUX_MODE15)
+			0x1ac (PIN_INPUT | MUX_MODE15)
+			0x1b0 (PIN_INPUT | MUX_MODE15)
+			0x1b4 (PIN_INPUT | MUX_MODE15)
+			0x1b8 (PIN_INPUT | MUX_MODE15)
+			0x1bc (PIN_INPUT | MUX_MODE15)
+			0x1c0 (PIN_INPUT | MUX_MODE15)
+			0x1c4 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_pins_default: davinci_mdio_pins_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
+			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
+		>;
+	};
+
+	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			0x23c (PIN_INPUT | MUX_MODE15)
+			0x240 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
 	tps659038_pins_default: tps659038_pins_default {
 		pinctrl-single,pins = <
 			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */

@@ -365,6 +445,32 @@
 	pinctrl-0 = <&uart3_pins_default>;
 };
 
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_pins_default>;
+	pinctrl-1 = <&cpsw_pins_sleep>;
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_pins_default>;
+	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
 &mmc1 {
 	status = "okay";
Signature · 1 line
2.1.0.GIT
Signature · 8 lines
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141204/3e8353b1/attachment.sig>
#2 lore raw

PATCH 1/1 ARM: dts: am57xx-beagle-x15: Add dual ethernet

Quoted 71 lines · Felipe Balbi
Quoted 9 lines · Felipe Balbi

Make CPSW work - BeagleBoard-X15 has two network ports

MUX_MODE15 means "driver off". Pins are turned off conserving more power.

Signed-off-by Felipe Balbi <[email protected]>
Signed-off-by Nishanth Menon <[email protected]>
Signed-off-by Sekhar Nori <[email protected]>
Signed-off-by Felipe Balbi <[email protected]>

grrr, not sure why it signed again... I guess git cherry-pick -s isn't very smart after all. Tony, let me know if you prefer that I resend fixing this SoB detail. In any case:

boot logs http://hastebin.com/joxiweleyi

Quoted 54 lines
---
 arch/arm/boot/dts/am57xx-beagle-x15.dts | 106 ++++++++++++++++++++++++++++++++
 1 file changed, 106 insertions(+)
arch/arm/boot/dts/am57xx-beagle-x15.dts +42 -0
index 49edbda..da1b24c 100644
@@ -140,6 +140,86 @@
 		>;
 	};
 
+	cpsw_pins_default: cpsw_pins_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
+			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
+			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
+			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
+			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
+			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
+			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
+			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
+			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
+			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
+			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
+			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
+			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
+			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
+			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
+			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
+			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
+			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
+			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
+			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
+			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
+			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
+			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
+		>;
+
+	};
+
+	cpsw_pins_sleep: cpsw_pins_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_INPUT | MUX_MODE15)
+			0x254 (PIN_INPUT | MUX_MODE15)
+			0x258 (PIN_INPUT | MUX_MODE15)
+			0x25c (PIN_INPUT | MUX_MODE15)
+			0x260 (PIN_INPUT | MUX_MODE15)
+			0x264 (PIN_INPUT | MUX_MODE15)
Quoted 8 lines

arch/arm/boot/dts/am57xx-beagle-x15.dts line 192

Quoted 8 lines
arch/arm/boot/dts/am57xx-beagle-x15.dts +8 -0
+			0x268 (PIN_INPUT | MUX_MODE15)
+			0x26c (PIN_INPUT | MUX_MODE15)
+			0x270 (PIN_INPUT | MUX_MODE15)
+			0x274 (PIN_INPUT | MUX_MODE15)
+			0x278 (PIN_INPUT | MUX_MODE15)
+			0x27c (PIN_INPUT | MUX_MODE15)
+
+			/* Slave 1 */

Slave 2?

Quoted 70 lines
Quoted 69 lines
arch/arm/boot/dts/am57xx-beagle-x15.dts +56 -0
+			0x198 (PIN_INPUT | MUX_MODE15)
+			0x19c (PIN_INPUT | MUX_MODE15)
+			0x1a0 (PIN_INPUT | MUX_MODE15)
+			0x1a4 (PIN_INPUT | MUX_MODE15)
+			0x1a8 (PIN_INPUT | MUX_MODE15)
+			0x1ac (PIN_INPUT | MUX_MODE15)
+			0x1b0 (PIN_INPUT | MUX_MODE15)
+			0x1b4 (PIN_INPUT | MUX_MODE15)
+			0x1b8 (PIN_INPUT | MUX_MODE15)
+			0x1bc (PIN_INPUT | MUX_MODE15)
+			0x1c0 (PIN_INPUT | MUX_MODE15)
+			0x1c4 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_pins_default: davinci_mdio_pins_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
+			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
+		>;
+	};
+
+	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			0x23c (PIN_INPUT | MUX_MODE15)
+			0x240 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
 	tps659038_pins_default: tps659038_pins_default {
 		pinctrl-single,pins = <
 			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */

@@ -365,6 +445,32 @@
 	pinctrl-0 = <&uart3_pins_default>;
 };
 
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_pins_default>;
+	pinctrl-1 = <&cpsw_pins_sleep>;
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_pins_default>;
+	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
 &mmc1 {
 	status = "okay";
Signature · 1 line
2.1.0.GIT
Signature · 2 lines
Regards,
Nishanth Menon
author
#3 lore raw

PATCH v2 1/1 ARM: dts: am57xx-beagle-x15: Add dual ethernet

Add CPSW DT binding to beagle X15 DTS in order to get ethernet working with this board.

Note that we're also adding sleep state which will place all pins in mux mode 15 - which means "driver off" - thus conserving power.

Signed-off-by Nishanth Menon <[email protected]>
Signed-off-by Sekhar Nori <[email protected]>
Signed-off-by Felipe Balbi <[email protected]>

---

Changes since v1:
- removed duplicated SoB from myself
- Fixed s/Slave 1/Slave2/ in one comment
- slightly improved commit log

 arch/arm/boot/dts/am57xx-beagle-x15.dts | 106 ++++++++++++++++++++++++++++++++
 1 file changed, 106 insertions(+)
arch/arm/boot/dts/am57xx-beagle-x15.dts +106 -0
index 49edbda..6c2e8e4 100644
@@ -140,6 +140,86 @@
 		>;
 	};
 
+	cpsw_pins_default: cpsw_pins_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
+			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
+			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
+			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
+			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
+			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
+			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
+			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
+			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
+			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
+			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
+			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
+			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
+			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
+			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
+			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
+			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
+			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
+			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
+			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
+			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
+			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
+			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
+		>;
+
+	};
+
+	cpsw_pins_sleep: cpsw_pins_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_INPUT | MUX_MODE15)
+			0x254 (PIN_INPUT | MUX_MODE15)
+			0x258 (PIN_INPUT | MUX_MODE15)
+			0x25c (PIN_INPUT | MUX_MODE15)
+			0x260 (PIN_INPUT | MUX_MODE15)
+			0x264 (PIN_INPUT | MUX_MODE15)
+			0x268 (PIN_INPUT | MUX_MODE15)
+			0x26c (PIN_INPUT | MUX_MODE15)
+			0x270 (PIN_INPUT | MUX_MODE15)
+			0x274 (PIN_INPUT | MUX_MODE15)
+			0x278 (PIN_INPUT | MUX_MODE15)
+			0x27c (PIN_INPUT | MUX_MODE15)
+
+			/* Slave 2 */
+			0x198 (PIN_INPUT | MUX_MODE15)
+			0x19c (PIN_INPUT | MUX_MODE15)
+			0x1a0 (PIN_INPUT | MUX_MODE15)
+			0x1a4 (PIN_INPUT | MUX_MODE15)
+			0x1a8 (PIN_INPUT | MUX_MODE15)
+			0x1ac (PIN_INPUT | MUX_MODE15)
+			0x1b0 (PIN_INPUT | MUX_MODE15)
+			0x1b4 (PIN_INPUT | MUX_MODE15)
+			0x1b8 (PIN_INPUT | MUX_MODE15)
+			0x1bc (PIN_INPUT | MUX_MODE15)
+			0x1c0 (PIN_INPUT | MUX_MODE15)
+			0x1c4 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_pins_default: davinci_mdio_pins_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
+			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
+		>;
+	};
+
+	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			0x23c (PIN_INPUT | MUX_MODE15)
+			0x240 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
 	tps659038_pins_default: tps659038_pins_default {
 		pinctrl-single,pins = <
 			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */

@@ -365,6 +445,32 @@
 	pinctrl-0 = <&uart3_pins_default>;
 };
 
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_pins_default>;
+	pinctrl-1 = <&cpsw_pins_sleep>;
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_pins_default>;
+	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
 &mmc1 {
 	status = "okay";
Signature · 1 line
2.1.0.GIT
#4 lore raw

PATCH v2 1/1 ARM: dts: am57xx-beagle-x15: Add dual ethernet

Quoted 135 lines · Felipe Balbi

Add CPSW DT binding to beagle X15 DTS in order to get ethernet working with this board.

Note that we're also adding sleep state which will place all pins in mux mode 15 - which means "driver off" - thus conserving power.

Signed-off-by Nishanth Menon <[email protected]>
Signed-off-by Sekhar Nori <[email protected]>
Signed-off-by Felipe Balbi <[email protected]>

---

Changes since v1:
- removed duplicated SoB from myself
- Fixed s/Slave 1/Slave2/ in one comment
- slightly improved commit log

 arch/arm/boot/dts/am57xx-beagle-x15.dts | 106 ++++++++++++++++++++++++++++++++
 1 file changed, 106 insertions(+)
arch/arm/boot/dts/am57xx-beagle-x15.dts +99 -0
index 49edbda..6c2e8e4 100644
@@ -140,6 +140,86 @@
 		>;
 	};
 
+	cpsw_pins_default: cpsw_pins_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
+			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
+			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
+			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
+			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
+			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
+			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
+			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
+			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
+			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
+			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
+			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
+			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
+			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
+			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
+			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
+			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
+			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
+			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
+			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
+			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
+			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
+			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
+		>;
+
+	};
+
+	cpsw_pins_sleep: cpsw_pins_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_INPUT | MUX_MODE15)
+			0x254 (PIN_INPUT | MUX_MODE15)
+			0x258 (PIN_INPUT | MUX_MODE15)
+			0x25c (PIN_INPUT | MUX_MODE15)
+			0x260 (PIN_INPUT | MUX_MODE15)
+			0x264 (PIN_INPUT | MUX_MODE15)
+			0x268 (PIN_INPUT | MUX_MODE15)
+			0x26c (PIN_INPUT | MUX_MODE15)
+			0x270 (PIN_INPUT | MUX_MODE15)
+			0x274 (PIN_INPUT | MUX_MODE15)
+			0x278 (PIN_INPUT | MUX_MODE15)
+			0x27c (PIN_INPUT | MUX_MODE15)
+
+			/* Slave 2 */
+			0x198 (PIN_INPUT | MUX_MODE15)
+			0x19c (PIN_INPUT | MUX_MODE15)
+			0x1a0 (PIN_INPUT | MUX_MODE15)
+			0x1a4 (PIN_INPUT | MUX_MODE15)
+			0x1a8 (PIN_INPUT | MUX_MODE15)
+			0x1ac (PIN_INPUT | MUX_MODE15)
+			0x1b0 (PIN_INPUT | MUX_MODE15)
+			0x1b4 (PIN_INPUT | MUX_MODE15)
+			0x1b8 (PIN_INPUT | MUX_MODE15)
+			0x1bc (PIN_INPUT | MUX_MODE15)
+			0x1c0 (PIN_INPUT | MUX_MODE15)
+			0x1c4 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_pins_default: davinci_mdio_pins_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
+			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
+		>;
+	};
+
+	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			0x23c (PIN_INPUT | MUX_MODE15)
+			0x240 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
 	tps659038_pins_default: tps659038_pins_default {
 		pinctrl-single,pins = <
 			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */

@@ -365,6 +445,32 @@
 	pinctrl-0 = <&uart3_pins_default>;
 };
 
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_pins_default>;
+	pinctrl-1 = <&cpsw_pins_sleep>;
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};

arch/arm/boot/dts/am57xx-beagle-x15.dts line 476

Quoted 10 lines
arch/arm/boot/dts/am57xx-beagle-x15.dts +7 -0
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_pins_default>;
+	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
 &mmc1 {
 	status = "okay";

Yep, looks better thanks.

depends on the ethernet dts and x15 patches queued previously for 3.19.

https://git.kernel.org/cgit/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v3.19/dt-v2

Signature · 2 lines
Regards,
Nishanth Menon
#5 lore raw

PATCH v2 1/1 ARM: dts: am57xx-beagle-x15: Add dual ethernet

In reply to Felipe Balbi
Quoted 10 lines · Felipe Balbi

Add CPSW DT binding to beagle X15 DTS in order to get ethernet working with this board.

Note that we're also adding sleep state which will place all pins in mux mode 15 - which means "driver off" - thus conserving power.

Signed-off-by Nishanth Menon <[email protected]>
Signed-off-by Sekhar Nori <[email protected]>
Signed-off-by Felipe Balbi <[email protected]>
Quoted 7 lines

---

Changes since v1:
- removed duplicated SoB from myself
- Fixed s/Slave 1/Slave2/ in one comment
- slightly improved commit log

Applying into omap-for-v3.20/dt thanks.

Tony