arm: boot: dts: add support for AM437x IDK

The AM437x Industrial Development Kit (IDK) is an application development platform targeted at industrial communication and control applications.

It comes with a 3-phase motor driver, PROFINET,
PROFIBUS and a few other industrial communication
interfaces.

The board has 1GiB of DDR3 RAM, QSPI NOR flash,
a 100% discrete power design (no PMIC) and an
on-board 2MP camera (not supported with Linux
as of this writing).

---

boot log: http://hastebin.com/oxinotuzur

 arch/arm/boot/dts/Makefile           |   1 +
 arch/arm/boot/dts/am437x-idk-evm.dts | 381 +++++++++++++++++++++++++++++++++++
 2 files changed, 382 insertions(+)
 create mode 100644 arch/arm/boot/dts/am437x-idk-evm.dts

index 91bd5bd..1b2c7de 100644
@@ -366,6 +366,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
 	omap4-var-stk-om44.dtb
 dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \
 	am437x-sk-evm.dtb \
+	am437x-idk-evm.dtb \
 	am437x-gp-evm.dtb
 dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \
 	omap5-sbc-t54.dtb \

2.2.0

Applying into omap-for-v3.20/dt thanks.

Tony