Skip to contentSkip to conversation

sunxi: video: Add lvds support

PATCH Superseded Hans de Goede 3 participants 7 messages Jan 8, 2015 – Jan 10, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v2 cover sunxi: video: Add lvds support

Hi Ian, Anatolij,

Here is v2 of the lvds support for sunxi-video. I've reworked how to Kconfig bits are handled as requested by Ian.

Anatolij, the second patch in this sets adds support for initializing the lcd controller found on hitachi tx18d42vm lcd panels, this lvds lcd controller needs some poking via a separate spi bus before the panel will do anything.

This code is not really sunxi specific, but since sunxi is the only (known) user of such a lcd controller I've chosen to do this in a sunxi specific file for now, with the idea that making the code generic is more easy when we actually have a second user, and thus a better idea of what is needed for a generic implementation. Can we get your ack for this solution? Or let me know if you want me todo something generic right away and then I'll rework the patch.

Regards,

Hans

#1 lore raw

PATCH v2 1/2 sunxi: video: Add lvds support

Add support for lvds lcd panels

---
 arch/arm/include/asm/arch-sunxi/clock_sun4i.h |  2 ++
 arch/arm/include/asm/arch-sunxi/display.h     | 12 +++++++++
 arch/arm/include/asm/arch-sunxi/gpio.h        |  1 +
 board/sunxi/Kconfig                           | 27 +++++++++++++++++++
 drivers/video/sunxi_display.c                 | 37 +++++++++++++++++++++++++--
 5 files changed, 77 insertions(+), 2 deletions(-)
arch/arm/include/asm/arch-sunxi/clock_sun4i.h +2 -0
index 64b5c38..70b789e 100644
@@ -284,6 +284,8 @@ struct sunxi_ccm_reg {
 /* Enable / disable both ch1 sclk1 and sclk2 at the same time */
 #define CCM_LCD_CH1_CTRL_GATE		(0x1 << 31 | 0x1 << 15)
 
+#define CCM_LVDS_CTRL_RST		(1 << 0)
+
 #define CCM_HDMI_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
 #define CCM_HDMI_CTRL_PLL_MASK		(3 << 24)
 #define CCM_HDMI_CTRL_PLL3		(0 << 24)
arch/arm/include/asm/arch-sunxi/display.h +12 -0
index 19582c1..6f586f1 100644
@@ -91,6 +91,9 @@ struct sunxi_lcdc_reg {
 	u8 res3[0x44];			/* 0xac */
 	u32 tcon1_io_polarity;		/* 0xf0 */
 	u32 tcon1_io_tristate;		/* 0xf4 */
+	u8 res4[0x128];			/* 0xf8 */
+	u32 lvds_ana0;			/* 0x220 */
+	u32 lvds_ana1;			/* 0x224 */
 };
 
 struct sunxi_hdmi_reg {
@@ -244,12 +247,21 @@ struct sunxi_tve_reg {
 #define SUNXI_LCDC_TCON0_TIMING_H_TOTAL(n)	(((n) - 1) << 16)
 #define SUNXI_LCDC_TCON0_TIMING_V_BP(n)		(((n) - 1) << 0)
 #define SUNXI_LCDC_TCON0_TIMING_V_TOTAL(n)	(((n) * 2) << 16)
+#define SUNXI_LCDC_TCON0_LVDS_INTF_BITWIDTH(n)	((n) << 26)
+#define SUNXI_LCDC_TCON0_LVDS_INTF_ENABLE	(1 << 31)
+#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE0	(0 << 28)
+#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE60	(1 << 28)
+#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE120	(2 << 28)
 #define SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(n)	(((n) & 0x1f) << 4)
 #define SUNXI_LCDC_TCON1_CTRL_ENABLE		(1 << 31)
 #define SUNXI_LCDC_TCON1_TIMING_H_BP(n)		(((n) - 1) << 0)
 #define SUNXI_LCDC_TCON1_TIMING_H_TOTAL(n)	(((n) - 1) << 16)
 #define SUNXI_LCDC_TCON1_TIMING_V_BP(n)		(((n) - 1) << 0)
 #define SUNXI_LCDC_TCON1_TIMING_V_TOTAL(n)	(((n) * 2) << 16)
+#define SUNXI_LCDC_LVDS_ANA0			0x3f310000
+#define SUNXI_LCDC_LVDS_ANA0_UPDATE		(1 << 22)
+#define SUNXI_LCDC_LVDS_ANA1_INIT1		(0x1f << 26 | 0x1f << 10)
+#define SUNXI_LCDC_LVDS_ANA1_INIT2		(0x1f << 16 | 0x1f << 00)
 
 /*
  * HDMI register constants.
arch/arm/include/asm/arch-sunxi/gpio.h +1 -0
index 9438f5a..71cc879 100644
@@ -151,6 +151,7 @@ enum sunxi_gpio_number {
 #define SUNXI_GPC6_SDC2		3
 
 #define SUNXI_GPD0_LCD0		2
+#define SUNXI_GPD0_LVDS0	3
 
 #define SUNXI_GPF0_SDC0		2
 
board/sunxi/Kconfig +27 -0
index 8782394..e5aa05b 100644
@@ -345,6 +345,33 @@ config VIDEO_LCD_BL_PWM
 	Set the backlight pwm pin for the LCD panel. This takes a string in the
 	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
 
+
+# Note only one of these may be selected@a time! But hidden choices are
+# not supported by Kconfig
+config VIDEO_LCD_IF_PARALLEL
+	bool
+
+config VIDEO_LCD_IF_LVDS
+	bool
+
+
+choice
+	prompt "LCD panel support"
+	depends on VIDEO
+	---help---
+	Select which type of LCD panel to support.
+
+config VIDEO_LCD_PANEL_PARALLEL
+	bool "Generic parallel interface LCD panel"
+	select VIDEO_LCD_IF_PARALLEL
+
+config VIDEO_LCD_PANEL_LVDS
+	bool "Generic lvds interface LCD panel"
+	select VIDEO_LCD_IF_LVDS
+
+endchoice
+
+
 config USB_KEYBOARD
 	boolean "Enable USB keyboard support"
 	default y
drivers/video/sunxi_display.c +35 -2
index 8241492..47d820d 100644
@@ -339,8 +339,13 @@ static void sunxi_lcdc_pll_set(int tcon, int dotclock,
 	int best_double = 0;
 
 	if (tcon == 0) {
+#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL
 		min_m = 6;
 		max_m = 127;
+#endif
+#ifdef CONFIG_VIDEO_LCD_IF_LVDS
+		min_m = max_m = 7;
+#endif
 	} else {
 		min_m = 1;
 		max_m = 15;
@@ -420,6 +425,9 @@ static void sunxi_lcdc_init(void)
 
 	/* Clock on */
 	setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0);
+#ifdef CONFIG_VIDEO_LCD_IF_LVDS
+	setbits_le32(&ccm->lvds_clk_cfg, CCM_LVDS_CTRL_RST);
+#endif
 
 	/* Init lcdc */
 	writel(0, &lcdc->ctrl); /* Disable tcon */
@@ -439,6 +447,16 @@ static void sunxi_lcdc_enable(void)
 		(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
 
 	setbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE);
+#ifdef CONFIG_VIDEO_LCD_IF_LVDS
+	setbits_le32(&lcdc->tcon0_lvds_intf, SUNXI_LCDC_TCON0_LVDS_INTF_ENABLE);
+	setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0);
+	setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_UPDATE);
+	udelay(2); /* delay at least 1200 ns */
+	setbits_le32(&lcdc->lvds_ana1, SUNXI_LCDC_LVDS_ANA1_INIT1);
+	udelay(1); /* delay at least 120 ns */
+	setbits_le32(&lcdc->lvds_ana1, SUNXI_LCDC_LVDS_ANA1_INIT2);
+	setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_UPDATE);
+#endif
 }
 
 static void sunxi_lcdc_panel_enable(void)
@@ -507,7 +525,12 @@ static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode)
 	int bp, clk_delay, clk_div, clk_double, pin, total, val;
 
 	for (pin = SUNXI_GPD(0); pin <= SUNXI_GPD(27); pin++)
+#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL
 		sunxi_gpio_set_cfgpin(pin, SUNXI_GPD0_LCD0);
+#endif
+#ifdef CONFIG_VIDEO_LCD_IF_LVDS
+		sunxi_gpio_set_cfgpin(pin, SUNXI_GPD0_LVDS0);
+#endif
 
 	sunxi_lcdc_pll_set(0, mode->pixclock_khz, &clk_div, &clk_double);
 
@@ -535,12 +558,17 @@ static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode)
 	writel(SUNXI_LCDC_TCON0_TIMING_V_TOTAL(total) |
 	       SUNXI_LCDC_TCON0_TIMING_V_BP(bp), &lcdc->tcon0_timing_v);
 
+#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL
 	writel(SUNXI_LCDC_X(mode->hsync_len) | SUNXI_LCDC_Y(mode->vsync_len),
 	       &lcdc->tcon0_timing_sync);
 
-	/* We only support hv-sync parallel lcd-s for now */
 	writel(0, &lcdc->tcon0_hv_intf);
 	writel(0, &lcdc->tcon0_cpu_intf);
+#endif
+#ifdef CONFIG_VIDEO_LCD_IF_LVDS
+	val = (sunxi_display.depth == 18) ? 1 : 0;
+	writel(SUNXI_LCDC_TCON0_LVDS_INTF_BITWIDTH(val), &lcdc->tcon0_lvds_intf);
+#endif
 
 	if (sunxi_display.depth == 18 || sunxi_display.depth == 16) {
 		writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[0]);
@@ -559,7 +587,12 @@ static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode)
 		       &lcdc->tcon0_frm_ctrl);
 	}
 
-	val = 0;
+#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL
+	val = SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE0;
+#endif
+#ifdef CONFIG_VIDEO_LCD_IF_LVDS
+	val = SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE60;
+#endif
 	if (!(mode->sync & FB_SYNC_HOR_HIGH_ACT))
 		val |= SUNXI_LCDC_TCON_HSYNC_MASK;
 	if (!(mode->sync & FB_SYNC_VERT_HIGH_ACT))
Signature · 1 line
2.1.0
#3 lore raw

PATCH v2 2/2 sunxi: video: Add support for Hitachi tx18d42vm LCD panels

In reply to Hans de Goede

Hitachi tx18d42vm LCD panels have an onboard controller which needs some initialization via spi for the panel to become functional as a regular LVDS panel.

---
 board/sunxi/Kconfig             |  4 +++
 drivers/video/Makefile          |  2 +-
 drivers/video/sunxi_display.c   |  5 +++
 drivers/video/sunxi_lcd_panel.c | 68 +++++++++++++++++++++++++++++++++++++++++
 drivers/video/sunxi_lcd_panel.h |  9 ++++++
 5 files changed, 87 insertions(+), 1 deletion(-)
 create mode 100644 drivers/video/sunxi_lcd_panel.c
 create mode 100644 drivers/video/sunxi_lcd_panel.h
board/sunxi/Kconfig +4 -0
index e5aa05b..adee5ed 100644
@@ -369,6 +369,10 @@ config VIDEO_LCD_PANEL_LVDS
 	bool "Generic lvds interface LCD panel"
 	select VIDEO_LCD_IF_LVDS
 
+config VIDEO_LCD_PANEL_HITACHI_TX18D42VM
+	bool "Hitachi tx18d42vm LCD panel"
+	select VIDEO_LCD_IF_LVDS
+
 endchoice
 
 
drivers/video/Makefile +1 -1
index 42b1eaa..d4fe1aa 100644
@@ -39,7 +39,7 @@ obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o
 obj-$(CONFIG_VIDEO_SED13806) += sed13806.o
 obj-$(CONFIG_VIDEO_SM501) += sm501.o
 obj-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
-obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o videomodes.o
+obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o sunxi_lcd_panel.o videomodes.o
 obj-$(CONFIG_VIDEO_TEGRA) += tegra.o
 obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
 obj-$(CONFIG_VIDEO_X86) += x86_fb.o
drivers/video/sunxi_display.c +5 -0
index 47d820d..c3fc732 100644
@@ -19,6 +19,7 @@
 #include <fdtdec.h>
 #include <fdt_support.h>
 #include <video_fb.h>
+#include "sunxi_lcd_panel.h"
 #include "videomodes.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -487,6 +488,10 @@ static void sunxi_lcdc_panel_enable(void)
 		gpio_request(pin, "lcd_power");
 		gpio_direction_output(pin, 1);
 	}
+
+#ifdef CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM
+	sunxi_lcd_panel_hitachi_tx18d42vm_init();
+#endif
 }
 
 static void sunxi_lcdc_backlight_enable(void)
drivers/video/sunxi_lcd_panel.c new file +68 -0

68 lines not on this page · raw message

drivers/video/sunxi_lcd_panel.h new file +9 -0
new file mode 100644
index 0000000..1fb9f1e
@@ -0,0 +1,9 @@
+/*
+ * LCD panel driver for Allwinner SoCs.
+ *
+ * (C) Copyright 2015 Hans de Goede <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+void sunxi_lcd_panel_hitachi_tx18d42vm_init(void);
Signature · 1 line
2.1.0
#5 lore raw

v2 cover sunxi: video: Add lvds support

In reply to Hans de Goede
Quoted 9 lines · Hans de Goede

Hi Ian, Anatolij,

Here is v2 of the lvds support for sunxi-video. I've reworked how to Kconfig bits are handled as requested by Ian.

Anatolij, the second patch in this sets adds support for initializing the lcd controller found on hitachi tx18d42vm lcd panels, this lvds lcd controller needs some poking via a separate spi bus before the panel will do anything.

Quoted 7 lines

This code is not really sunxi specific, but since sunxi is the only (known) user of such a lcd controller I've chosen to do this in a sunxi specific file for now, with the idea that making the code generic is more easy when we actually have a second user, and thus a better idea of what is needed for a generic implementation. Can we get your ack for this solution? Or let me know if you want me todo something generic right away and then I'll rework the patch.

Anatolij has acked it, so I don't object.

Do you think it might be worth doing:

#if definged(CONFIG_VIDEO_LCD_IF_PARALLEL)
...
#elif defined(CONFIG_VIDEO_LCD_IF_LVDS)
...
#else
#error unknown LCD_IF
#endif

instead of the independnent #ifdef's, so anyone adding a third option gets a warning to think about at each site? (Just a suggestion, not to block the patches if you disagree).

Ian.

#6 lore raw

v2 cover sunxi: video: Add lvds support

Hi,

Quoted 32 lines · Ian Campbell
Quoted 9 lines · Hans de Goede

Hi Ian, Anatolij,

Here is v2 of the lvds support for sunxi-video. I've reworked how to Kconfig bits are handled as requested by Ian.

Anatolij, the second patch in this sets adds support for initializing the lcd controller found on hitachi tx18d42vm lcd panels, this lvds lcd controller needs some poking via a separate spi bus before the panel will do anything.

Quoted 7 lines

This code is not really sunxi specific, but since sunxi is the only (known) user of such a lcd controller I've chosen to do this in a sunxi specific file for now, with the idea that making the code generic is more easy when we actually have a second user, and thus a better idea of what is needed for a generic implementation. Can we get your ack for this solution? Or let me know if you want me todo something generic right away and then I'll rework the patch.

Anatolij has acked it, so I don't object.

Do you think it might be worth doing:

#if definged(CONFIG_VIDEO_LCD_IF_PARALLEL)
...
#elif defined(CONFIG_VIDEO_LCD_IF_LVDS)
...
#else
#error unknown LCD_IF
#endif

Quoted 3 lines

instead of the independnent #ifdef's, so anyone adding a third option gets a warning to think about at each site? (Just a suggestion, not to block the patches if you disagree).

Funny I have been thinking the same myself,
I could do that for the current:

#if defined(CONFIG_VIDEO_LCD_IF_PARALLEL)
...
#endif
#if defined(CONFIG_VIDEO_LCD_IF_LVDS)
...
#endif

blocks, but that still leaves a couple of blocks which are just:

#if defined(CONFIG_VIDEO_LCD_IF_LVDS)
...
#endif

So I decided to just keep the same style everywhere.

Regards,

Hans