usb: eth: asix88179: add ability to modify MAC address
PATCH v2 1/1 usb: eth: asix88179: add ability to modify MAC address
This patch enables U-Boot to modify the MAC address of the AX88179. Tested on RECS5250 (similar to Arndale5250)
---
Changes for v2:
- removed memcpy
drivers/usb/eth/asix88179.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/usb/eth/asix88179.c +14 -0
@@ -271,6 +271,19 @@ static int asix_read_mac(struct eth_device *eth)return 0 ; } +static int asix_write_mac (struct eth_device *eth) +{ +struct ueth_data *dev = (struct ueth_data *)eth->priv; +int ret; + + ret =asix_write_cmd (dev,AX_ACCESS_MAC ,AX_NODE_ID ,ETH_ALEN , +ETH_ALEN , eth->enetaddr); +if (ret <0 ) +debug ("Failed to set MAC address: %02x\n" , ret); + +return ret; +} +static int asix_basic_reset (struct ueth_data *dev) {struct asix_private *dev_priv = (struct asix_private *)dev->dev_priv;
@@ -686,6 +699,7 @@ int ax88179_eth_get_info(struct usb_device *dev, struct ueth_data *ss, eth->send = asix_send; eth->recv = asix_recv; eth->halt = asix_halt; + eth->write_hwaddr = asix_write_mac; eth->priv = ss;if (asix_basic_reset (ss))
Signature · 1 line
1.9.1
PATCH v2 1/1 usb: eth: asix88179: add ability to modify MAC address
Quoted 8 lines · Rene Griessl
This patch enables U-Boot to modify the MAC address of the AX88179. Tested on RECS5250 (similar to Arndale5250)
Signed-off-by Rene Griessl <[email protected]>---
Changes for v2:
- removed memcpy
Hi!
what was the reason for the memcpy() in the first place please ?
Otherwise,
Best regards,
Marek Vasut
PATCH v2 1/1 usb: eth: asix88179: add ability to modify MAC address
Am 12.01.2015 um 17:54 schrieb Marek Vasut:
Quoted 12 lines · Rene Griessl
Quoted 8 lines
This patch enables U-Boot to modify the MAC address of the AX88179. Tested on RECS5250 (similar to Arndale5250)
Signed-off-by Rene Griessl <[email protected]>---
Changes for v2:
- removed memcpyHi!
what was the reason for the
memcpy()in the first place please ?
I copied the function from the asix.c driver. There it is needed for the cache aligned buffer.
But in this case the alignment is already implemented in the write function. So you were right, it is not needed here!
Quoted 6 lines
Otherwise,
Reviewed-by Marek Vasut <[email protected]>Best regards,
Marek Vasut
Signature · 13 lines
-------------------------------------------------------- Dipl.-Ing. Ren? Griessl Universit?t Bielefeld AG Kognitronik & Sensorik Exzellenzcluster Cognitive Interaction Technology (CITEC) Inspiration 1 (Zehlendorfer Damm 199) 33615 Bielefeld Telefon : +49 521-106-67362 Fax : +49 521-106-12348 eMail : rgriessl at cit-ec.uni-bielefeld.de Internet: http://www.ks.cit-ec.uni-bielefeld.de/
PATCH v2 1/1 usb: eth: asix88179: add ability to modify MAC address
Quoted 11 lines · Ren? Griessl
Am 12.01.2015 um 17:54 schrieb Marek Vasut:
Quoted 10 lines · Rene Griessl
Quoted 8 lines
This patch enables U-Boot to modify the MAC address of the AX88179. Tested on RECS5250 (similar to Arndale5250)
Signed-off-by Rene Griessl <[email protected]>---
Changes for v2:
- removed memcpy
Quoted 8 lines
Quoted 3 lines
Hi!
what was the reason for the
memcpy()in the first place please ?I copied the function from the
asix.cdriver. There it is needed for the cache aligned buffer.
But in this case the alignment is already implemented in the write function. So you were right, it is not needed here!
OK, thanks!
Applied to u-boot-usb/next , thanks!
Best regards,
Marek Vasut
PATCH v2 1/1 usb: eth: asix88179: add ability to modify MAC address
Quoted 17 lines · Marek Vasut
Quoted 15 lines · Ren? Griessl
Am 12.01.2015 um 17:54 schrieb Marek Vasut:
Quoted 13 lines · Rene Griessl
Quoted 8 lines
This patch enables U-Boot to modify the MAC address of the AX88179. Tested on RECS5250 (similar to Arndale5250)
Signed-off-by Rene Griessl <[email protected]>---
Changes for v2:
- removed memcpyHi!
what was the reason for the
memcpy()in the first place please ?
Quoted 8 lines
Quoted 4 lines
I copied the function from the
asix.cdriver. There it is needed for the cache aligned buffer.
But in this case the alignment is already implemented in the write function. So you were right, it is not needed here!OK, thanks!
Applied to u-boot-usb/next , thanks!
Looks good... Thanks, guys!
-Joe