ARM: dts: sun7i: Add dts file for Bananapro board

Add support for the new Bananapro A20 development board from lemaker.org. This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver, 3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi.

---
Changes in v2:
- Use cpp style includes
- Use GPIO header for the GPIO flags
- Address nodes by reference rather then by their full dt path

Changes in v3:
- Sort nodes alphabetically

---
 arch/arm/boot/dts/Makefile                |   1 +
 arch/arm/boot/dts/sun7i-a20-bananapro.dts | 262 ++++++++++++++++++++++++++++++
 2 files changed, 263 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapro.dts

index 601eb3d..34281aa 100644
@@ -465,6 +465,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31s-cs908.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapro.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
 	sun7i-a20-hummingbird.dtb \

2.1.0

The Chuwi V7 is an A10 (sun4i) based tablet with 1G of RAM, 16G of nand flash, microsd slot, 7" 1024x768 lvds ips panel, mini hdmi out, headphones out, stereo speakers, front & back camera and usb wifi.

It is clearly marked "CHUWI", "V7" and "Model: CW0825" on the back of the tablet.

---
Changes in v2:
- Use cpp style includes
- Use GPIO header for the GPIO flags
- Address nodes by reference rather then by their full dt path

Changes in v3:
- Sort nodes alphabetically

---
 arch/arm/boot/dts/Makefile                      |   1 +
 arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 100 ++++++++++++++++++++++++
 2 files changed, 101 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts

index 34281aa..fa8fd93 100644
@@ -445,6 +445,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
 	sun4i-a10-cubieboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-hackberry.dtb \

2.1.0

Applied the two, thanks!

Maxime

Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150119/2142e230/attachment-0001.sig>