Skip to contentSkip to conversation

ARM: dts: imx6q: enable dma for ecspi5

PATCH New Anton Bondarenko 2 participants 2 messages Jan 13, 2015 – Jan 20, 2015

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Anton Bondarenko

author
#0 lore raw

PATCH v2 1/1 ARM: dts: imx6q: enable dma for ecspi5

Enable dma support for ecspi5 controller

Signed-off-by Anton Bondarenko <[email protected]>
---
 arch/arm/boot/dts/imx6q.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/boot/dts/imx6q.dtsi +2 -0
index 37ee4e5..93ec79b 100644
@@ -95,6 +95,8 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
Signature · 1 line
2.2.1
Applied
#1 lore raw

PATCH v2 1/1 ARM: dts: imx6q: enable dma for ecspi5

Quoted 3 lines · Anton Bondarenko

Enable dma support for ecspi5 controller

Signed-off-by Anton Bondarenko <[email protected]>

Applied, thanks.

Quoted 20 lines
---
 arch/arm/boot/dts/imx6q.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/boot/dts/imx6q.dtsi +2 -0
index 37ee4e5..93ec79b 100644
@@ -95,6 +95,8 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
Signature · 1 line
2.2.1