Replacing ERR by dev_err
cover Replacing ERR by dev_err
This patch set removes the macro ERR from emxx_udc.h and accordingly emxx_udc.c occurrences of ERR changes to dev_err
Ahmad Hassan (2):
staging: emxx_udc: Replace ERR by dev_err
staging: emxx_udc: remove macro ERR
drivers/staging/emxx_udc/emxx_udc.c | 80 ++++++++++++++++++------------------- drivers/staging/emxx_udc/emxx_udc.h | 1 - 2 files changed, 40 insertions(+), 41 deletions(-)
Signature · 1 line
2.2.1
PATCH 1/2 staging: emxx_udc: Replace ERR by dev_err
Replaced all occurences of ERR with dev_err.
The device passed to dev_err is udc->dev.
--- drivers/staging/emxx_udc/emxx_udc.c | 80 ++++++++++++++++++------------------- 1 file changed, 40 insertions(+), 40 deletions(-)
drivers/staging/emxx_udc/emxx_udc.c +40 -40
@@ -115,7 +115,7 @@ static void _nbu2ss_dump_register(struct nbu2ss_udc *udc)pr_info ("=== %s()\n" , __func__);if (udc ==NULL ) { -ERR ("%s udc == NULL\n" , __func__); +dev_err (udc->dev,"%s udc == NULL\n" , __func__);return ; }
@@ -808,7 +808,7 @@ static int _nbu2ss_ep0_out_transfer(return 0 ;/* Short Packet Transfer End */ if (req->req.actual > req->req.length) { -ERR (" *** Overrun Error\n" ); +dev_err (udc->dev," *** Overrun Error\n" );return -EOVERFLOW ; }
@@ -1026,8 +1026,8 @@ static int _nbu2ss_epn_out_transfer( }if (req->req.actual > req->req.length) { -ERR (" *** Overrun Error\n" ); -ERR (" *** actual = %d, length = %d\n" , +dev_err (udc->dev," *** Overrun Error\n" ); +dev_err (udc->dev," *** actual = %d, length = %d\n" , req->req.actual, req->req.length); result = -EOVERFLOW ; }
@@ -1638,7 +1638,7 @@ static int std_req_get_status(struct nbu2ss_udc *udc)_nbu2ss_ep0_in_transfer (udc, &udc->ep[0 ], &udc->ep0_req); }else { -ERR ("*** Error GET_STATUS\n" ); +dev_err (udc->dev,"*** Error GET_STATUS\n" ); }return result;
@@ -2258,7 +2258,7 @@ static int _nbu2ss_pullup(struct nbu2ss_udc *udc, int is_on)u32 reg_dt;if (!udc) { -ERR ("%s, bad param\n" , __func__); +dev_err (udc->dev,"%s, bad param\n" , __func__);return -EINVAL ; }
@@ -2350,7 +2350,7 @@ static int _nbu2ss_enable_controller(struct nbu2ss_udc *udc) waitcnt++;udelay (1 );/* 1us wait */ if (waitcnt ==EPC_PLL_LOCK_COUNT ) { -ERR ("*** Reset Cancel failed\n" ); +dev_err (udc->dev,"*** Reset Cancel failed\n" );return -EINVAL ; } };
@@ -2612,13 +2612,13 @@ static int nbu2ss_ep_enable(struct nbu2ss_udc *udc;if ((_ep ==NULL ) || (desc ==NULL )) { -ERR (" *** %s, bad param\n" , __func__); +dev_err (udc->dev," *** %s, bad param\n" , __func__);return -EINVAL ; } ep = container_of(_ep, struct nbu2ss_ep, ep);if ((ep ==NULL ) || (ep->udc ==NULL )) { -ERR (" *** %s, ep == NULL !!\n" , __func__); +dev_err (udc->dev," *** %s, ep == NULL !!\n" , __func__);return -EINVAL ; }
@@ -2626,7 +2626,7 @@ static int nbu2ss_ep_enable(if ((ep_type ==USB_ENDPOINT_XFER_CONTROL ) || (ep_type ==USB_ENDPOINT_XFER_ISOC )) { -ERR (" *** %s, bat bmAttributes\n" , __func__); +dev_err (udc->dev," *** %s, bat bmAttributes\n" , __func__);return -EINVAL ; }
@@ -2637,7 +2637,7 @@ static int nbu2ss_ep_enable(if ((udc->driver ==NULL ) || (udc->gadget.speed ==USB_SPEED_UNKNOWN )) { -ERR (" *** %s, udc !!\n" , __func__); +dev_err (udc->dev," *** %s, udc !!\n" , __func__);return -ESHUTDOWN ; }
@@ -2672,13 +2672,13 @@ static int nbu2ss_ep_disable(struct usb_ep *_ep)unsigned long flags;if (_ep ==NULL ) { -ERR (" *** %s, bad param\n" , __func__); +dev_err (udc->dev," *** %s, bad param\n" , __func__);return -EINVAL ; } ep = container_of(_ep, struct nbu2ss_ep, ep);if ((ep ==NULL ) || (ep->udc ==NULL )) { -ERR (" *** %s, ep == NULL !!\n" , __func__); +dev_err (udc->dev," *** %s, ep == NULL !!\n" , __func__);return -EINVAL ; }
@@ -2742,10 +2742,10 @@ static int nbu2ss_ep_queue(/* catch various bogus parameters */ if ((_ep ==NULL ) || (_req ==NULL )) {if (_ep ==NULL ) -ERR ("*** %s --- _ep == NULL\n" , __func__); +dev_err (udc->dev,"*** %s --- _ep == NULL\n" , __func__);if (_req ==NULL ) -ERR ("*** %s --- _req == NULL\n" , __func__); +dev_err (udc->dev,"*** %s --- _req == NULL\n" , __func__);return -EINVAL ; }
@@ -2756,13 +2756,13 @@ static int nbu2ss_ep_queue( || !list_empty(&req->queue))) {if (!_req->complete) -ERR ("*** %s --- !_req->complete\n" , __func__); +dev_err (udc->dev,"*** %s --- !_req->complete\n" , __func__);if (!_req->buf) -ERR ("*** %s --- !_req->buf\n" , __func__); +dev_err (udc->dev,"*** %s --- !_req->buf\n" , __func__);if (!list_empty (&req->queue)) -ERR ("*** %s --- !list_empty(&req->queue)\n" , __func__); +dev_err (udc->dev,"*** %s --- !list_empty(&req->queue)\n" , __func__);return -EINVAL ; }
@@ -2778,7 +2778,7 @@ static int nbu2ss_ep_queue( }if (unlikely (!udc->driver)) { -ERR ("%s, bogus device state %p\n" , __func__, udc->driver); +dev_err (udc->dev,"%s, bogus device state %p\n" , __func__, udc->driver);return -ESHUTDOWN ; }
@@ -2817,7 +2817,7 @@ static int nbu2ss_ep_queue( result =_nbu2ss_start_transfer (udc, ep, req, FALSE);if (result <0 ) { -ERR (" *** %s, result = %d\n" , __func__, result); +dev_err (udc->dev," *** %s, result = %d\n" , __func__, result);list_del (&req->queue); }else if ((ep->epnum >0 ) && (ep->direct ==USB_DIR_OUT )) {#ifdef USE_DMA
@@ -2849,13 +2849,13 @@ static int nbu2ss_ep_dequeue(/* catch various bogus parameters */ if ((_ep ==NULL ) || (_req ==NULL )) { -/* ERR("%s, bad param(1)\n", __func__); */ +/* dev_err(udc->dev,"%s, bad param(1)\n", __func__); */ return -EINVAL ; } ep = container_of(_ep, struct nbu2ss_ep, ep);if (!ep) { -ERR ("%s, ep == NULL !!\n" , __func__); +dev_err (udc->dev,"%s, ep == NULL !!\n" , __func__);return -EINVAL ; }
@@ -2895,19 +2895,19 @@ static int nbu2ss_ep_set_halt(struct usb_ep *_ep, int value)/* INFO("=== %s()\n", __func__); */ if (!_ep) { -ERR ("%s, bad param\n" , __func__); +dev_err (udc->dev,"%s, bad param\n" , __func__);return -EINVAL ; } ep = container_of(_ep, struct nbu2ss_ep, ep);if (!ep) { -ERR ("%s, bad ep\n" , __func__); +dev_err (udc->dev,"%s, bad ep\n" , __func__);return -EINVAL ; } udc = ep->udc;if (!udc) { -ERR (" *** %s, bad udc\n" , __func__); +dev_err (udc->dev," *** %s, bad udc\n" , __func__);return -EINVAL ; }
@@ -2949,19 +2949,19 @@ static int nbu2ss_ep_fifo_status(struct usb_ep *_ep)/* INFO("=== %s()\n", __func__); */ if (!_ep) { -ERR ("%s, bad param\n" , __func__); +dev_err (udc->dev,"%s, bad param\n" , __func__);return -EINVAL ; } ep = container_of(_ep, struct nbu2ss_ep, ep);if (!ep) { -ERR ("%s, bad ep\n" , __func__); +dev_err (udc->dev,"%s, bad ep\n" , __func__);return -EINVAL ; } udc = ep->udc;if (!udc) { -ERR ("%s, bad udc\n" , __func__); +dev_err (udc->dev,"%s, bad udc\n" , __func__);return -EINVAL ; }
@@ -2997,19 +2997,19 @@ static void nbu2ss_ep_fifo_flush(struct usb_ep *_ep)/* INFO("=== %s()\n", __func__); */ if (!_ep) { -ERR ("%s, bad param\n" , __func__); +dev_err (udc->dev,"%s, bad param\n" , __func__);return ; } ep = container_of(_ep, struct nbu2ss_ep, ep);if (!_ep) { -ERR ("%s, bad ep\n" , __func__); +dev_err (udc->dev,"%s, bad ep\n" , __func__);return ; } udc = ep->udc;if (!udc) { -ERR ("%s, bad udc\n" , __func__); +dev_err (udc->dev,"%s, bad udc\n" , __func__);return ; }
@@ -3053,13 +3053,13 @@ static int nbu2ss_gad_get_frame(struct usb_gadget *pgadget)/* INFO("=== %s()\n", __func__); */ if (pgadget ==NULL ) { -ERR ("%s, bad param\n" , __func__); +dev_err (udc->dev,"%s, bad param\n" , __func__);return -EINVAL ; } udc = container_of(pgadget, struct nbu2ss_udc, gadget);if (udc ==NULL ) { -ERR ("%s, udc == NULL\n" , __func__); +dev_err (udc->dev,"%s, udc == NULL\n" , __func__);return -EINVAL ; }
@@ -3083,13 +3083,13 @@ static int nbu2ss_gad_wakeup(struct usb_gadget *pgadget)/* INFO("=== %s()\n", __func__); */ if (pgadget ==NULL ) { -ERR ("%s, bad param\n" , __func__); +dev_err (udc->dev,"%s, bad param\n" , __func__);return -EINVAL ; } udc = container_of(pgadget, struct nbu2ss_udc, gadget);if (udc ==NULL ) { -ERR ("%s, udc == NULL\n" , __func__); +dev_err (udc->dev,"%s, udc == NULL\n" , __func__);return -EINVAL ; }
@@ -3123,7 +3123,7 @@ static int nbu2ss_gad_set_selfpowered(struct usb_gadget *pgadget,/* INFO("=== %s()\n", __func__); */ if (pgadget ==NULL ) { -ERR ("%s, bad param\n" , __func__); +dev_err (udc->dev,"%s, bad param\n" , __func__);return -EINVAL ; }
@@ -3152,7 +3152,7 @@ static int nbu2ss_gad_vbus_draw(struct usb_gadget *pgadget, unsigned mA)/* INFO("=== %s()\n", __func__); */ if (pgadget ==NULL ) { -ERR ("%s, bad param\n" , __func__); +dev_err (udc->dev,"%s, bad param\n" , __func__);return -EINVAL ; }
@@ -3174,7 +3174,7 @@ static int nbu2ss_gad_pullup(struct usb_gadget *pgadget, int is_on)/* INFO("=== %s()\n", __func__); */ if (pgadget ==NULL ) { -ERR ("%s, bad param\n" , __func__); +dev_err (udc->dev,"%s, bad param\n" , __func__);return -EINVAL ; }
@@ -3369,7 +3369,7 @@ static int nbu2ss_drv_probe(struct platform_device *pdev)/* USB Function Controller Interrupt */ if (status !=0 ) { -ERR ("request_irq(USB_UDC_IRQ_1) failed\n" ); +dev_err (udc->dev,"request_irq(USB_UDC_IRQ_1) failed\n" ); goto cleanup1; }
@@ -3389,7 +3389,7 @@ static int nbu2ss_drv_probe(struct platform_device *pdev) udc);if (status !=0 ) { -ERR ("request_irq(INT_VBUS) failed\n" ); +dev_err (udc->dev,"request_irq(INT_VBUS) failed\n" ); goto cleanup1; }
Signature · 1 line
2.2.1
Re: [PATCH 1/2] staging: emxx_udc: Replace ERR by dev_err
Ahmad,
On Wed, Jan 21, 2015 at 01:55:11PM -0900, Ahmad Hassan wrote:
[...]
drivers/staging/emxx_udc/emxx_udc.c static void _nbu2ss_dump_register(struct nbu2ss_udc *udc) · line 118
Quoted 3 lines
drivers/staging/emxx_udc/emxx_udc.c +1
-1if (udc ==NULL ) { -ERR ("%s udc == NULL\n" , __func__); +dev_err (udc->dev,"%s udc == NULL\n" , __func__);
^^^^^
Always check your patches with checkpatch.pl before submitting them.
There are a bunch of "space required after ','" errors in this patch.
Signature · 1 line
- Jeremiah Mahler
PATCH 2/2 staging: emxx_udc: remove macro ERR
In reply to Ahmad HassanRemoved ERR macro since it is not used anymore in the emxx_udc.c file.
--- drivers/staging/emxx_udc/emxx_udc.h | 1 - 1 file changed, 1 deletion(-)
drivers/staging/emxx_udc/emxx_udc.h +0 -1
@@ -644,6 +644,5 @@ typedef volatile union { } USB_REG_ACCESS;/*-------------------------------------------------------------------------*/ -#define ERR(stuff...) printk(KERN_ERR "udc: " stuff)#endif /* _LINUX_EMXX_H */
Signature · 1 line
2.2.1
Re: [PATCH 2/2] staging: emxx_udc: remove macro ERR
Quoted 12 lines · Ahmad Hassan
Removed ERR macro since it is not used anymore in the
emxx_udc.cfile.Signed-off-by Ahmad Hassan <[email protected]>--- drivers/staging/emxx_udc/emxx_udc.h | 1 - 1 file changed, 1 deletion(-)drivers/staging/emxx_udc/emxx_udc.h +0
-0
drivers/staging/emxx_udc/emxx_udc.h typedef volatile union { · line 646
Quoted 3 lines
drivers/staging/emxx_udc/emxx_udc.h +0
-0@@ -644,6 +644,5 @@ typedef volatile union { }USB_REG_ACCESS ;/*-------------------------------------------------------------------------*/
While at it, you could also remove the line above.
Quoted 11 lines
drivers/staging/emxx_udc/emxx_udc.h +0
-1-#define ERR(stuff...) printk(KERN_ERR "udc: " stuff)#endif /* _LINUX_EMXX_H */ Signature · 6 lines
2.2.1 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel