sunxi: video: Add support for Hitachi tx18d42vm LVDS LCD panels
Subsystems (2)
PATCH 1/1 sunxi: video: Add support for Hitachi tx18d42vm LVDS LCD panels
Add support for Hitachi tx18d42vm LVDS LCD panels, these panels have a lcd controller which needs to be initialized over SPI, once that is done they work like a regular LVDS panel.
--- board/sunxi/Kconfig | 7 +++++++ drivers/video/sunxi_display.c | 5 +++++ 2 files changed, 12 insertions(+)
board/sunxi/Kconfig +7 -0
@@ -354,6 +354,13 @@ config VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828 ---help--- 7.85" 768x1024 LCD panels, such as LG LP079X01 or AUO B079XAN01.0 +config VIDEO_LCD_PANEL_HITACHI_TX18D42VM + bool "Hitachi tx18d42vm LCD panel" + select VIDEO_LCD_HITACHI_TX18D42VM + select VIDEO_LCD_IF_LVDS + ---help--- + 7.85" 1024x768 Hitachi tx18d42vm LCD panel support + endchoice
drivers/video/sunxi_display.c +5 -0
@@ -20,6 +20,7 @@#include <fdt_support.h> #include <video_fb.h> #include "videomodes.h" +#include "hitachi_tx18d42vm_lcd.h" #include "ssd2828.h" DECLARE_GLOBAL_DATA_PTR ;
@@ -1004,6 +1005,10 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,break ;case sunxi_monitor_lcd:sunxi_lcdc_panel_enable (); +if (IS_ENABLED (CONFIG_VIDEO_LCD_HITACHI_TX18D42VM )) { +mdelay (50 );/* Wait for lcd controller power on */ +hitachi_tx18d42vm_init (); + }sunxi_composer_mode_set (mode, address);sunxi_lcdc_tcon0_mode_set (mode);sunxi_composer_enable ();
Signature · 1 line
2.1.0
PATCH 1/1 sunxi: video: Add support for Hitachi tx18d42vm LVDS LCD panels
Hi
Note this is v3, I forgot to set the subject-prefix for this. Changes since v2 are using "if (IS_ENABLED(CONFIG_...))" rather then #ifdef.
Regards,
Hans
Quoted 52 lines · Hans de Goede
Add support for Hitachi tx18d42vm LVDS LCD panels, these panels have a lcd controller which needs to be initialized over SPI, once that is done they work like a regular LVDS panel.
Signed-off-by Hans de Goede <[email protected]>--- board/sunxi/Kconfig | 7 +++++++ drivers/video/sunxi_display.c | 5 +++++ 2 files changed, 12 insertions(+)board/sunxi/Kconfig +7
-0@@ -354,6 +354,13 @@ config VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828 ---help--- 7.85" 768x1024 LCD panels, such as LG LP079X01 or AUO B079XAN01.0 +config VIDEO_LCD_PANEL_HITACHI_TX18D42VM + bool "Hitachi tx18d42vm LCD panel" + select VIDEO_LCD_HITACHI_TX18D42VM + select VIDEO_LCD_IF_LVDS + ---help--- + 7.85" 1024x768 Hitachi tx18d42vm LCD panel support + endchoicedrivers/video/sunxi_display.c +5
-0@@ -20,6 +20,7 @@#include <fdt_support.h> #include <video_fb.h> #include "videomodes.h" +#include "hitachi_tx18d42vm_lcd.h" #include "ssd2828.h" DECLARE_GLOBAL_DATA_PTR ;@@ -1004,6 +1005,10 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,break ;case sunxi_monitor_lcd:sunxi_lcdc_panel_enable (); +if (IS_ENABLED (CONFIG_VIDEO_LCD_HITACHI_TX18D42VM )) { +mdelay (50 );/* Wait for lcd controller power on */ +hitachi_tx18d42vm_init (); + }sunxi_composer_mode_set (mode, address);sunxi_lcdc_tcon0_mode_set (mode);sunxi_composer_enable ();
PATCH 1/1 sunxi: video: Add support for Hitachi tx18d42vm LVDS LCD panels
In reply to Hans de GoedeHi,
Quoted 5 lines · On Thu, 22 Jan 2015 20:52:26 +0100 Hans de Goede <[email protected]> wrote:
Add support for Hitachi tx18d42vm LVDS LCD panels, these panels have a lcd controller which needs to be initialized over SPI, once that is done they work like a regular LVDS panel.
Signed-off-by Hans de Goede <[email protected]>
Thanks,
Anatolij
PATCH 1/1 sunxi: video: Add support for Hitachi tx18d42vm LVDS LCD panels
In reply to Hans de GoedeQuoted 5 lines · Hans de Goede
Add support for Hitachi tx18d42vm LVDS LCD panels, these panels have a lcd controller which needs to be initialized over SPI, once that is done they work like a regular LVDS panel.
Signed-off-by Hans de Goede <[email protected]>