drm/i915: debugfs interface to read module parameters
Subsystems (2)
PATCH 1/1 drm/i915: debugfs interface to read module parameters
It can be useful to know what the driver's parameters have ended up set to after sanitisation, so this commit adds a debugfs function to print the current values of all the module parameters.
--- drivers/gpu/drm/i915/i915_debugfs.c | 45 +++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+)
drivers/gpu/drm/i915/i915_debugfs.c +45 -0
@@ -2819,6 +2819,50 @@ static int i915_ddb_info(struct seq_file *m, void *unused)return 0 ; } +static int i915_params (struct seq_file *m,void *unused) +{ +size_t extra; + +seq_printf (m,"i915.%s=%d\n" ,"modeset" , i915.modeset); +seq_printf (m,"i915.%s=%d\n" ,"panel_ignore_lid" , i915.panel_ignore_lid); +seq_printf (m,"i915.%s=%u\n" ,"powersave" , i915.powersave); +seq_printf (m,"i915.%s=%d\n" ,"semaphores" , i915.semaphores); +seq_printf (m,"i915.%s=%u\n" ,"lvds_downclock" , i915.lvds_downclock); +seq_printf (m,"i915.%s=%d\n" ,"lvds_channel_mode" , i915.lvds_channel_mode); +seq_printf (m,"i915.%s=%d\n" ,"panel_use_ssc" , i915.panel_use_ssc); +seq_printf (m,"i915.%s=%d\n" ,"vbt_sdvo_panel_type" , i915.vbt_sdvo_panel_type); +seq_printf (m,"i915.%s=%d\n" ,"enable_rc6" , i915.enable_rc6); +seq_printf (m,"i915.%s=%d\n" ,"enable_fbc" , i915.enable_fbc); +seq_printf (m,"i915.%s=%d\n" ,"enable_ppgtt" , i915.enable_ppgtt); +seq_printf (m,"i915.%s=%d\n" ,"enable_execlists" , i915.enable_execlists); +seq_printf (m,"i915.%s=%d\n" ,"enable_psr" , i915.enable_psr); +seq_printf (m,"i915.%s=%u\n" ,"preliminary_hw_support" , i915.preliminary_hw_support); +seq_printf (m,"i915.%s=%d\n" ,"disable_power_well" , i915.disable_power_well); +seq_printf (m,"i915.%s=%d\n" ,"enable_ips" , i915.enable_ips); +seq_printf (m,"i915.%s=%d\n" ,"invert_brightness" , i915.invert_brightness); +seq_printf (m,"i915.%s=%d\n" ,"enable_cmd_parser" , i915.enable_cmd_parser); +/* leave bools at the end to not create holes */ +seq_printf (m,"i915.%s=%#x\n" ,"enable_hangcheck" , i915.enable_hangcheck); +seq_printf (m,"i915.%s=%#x\n" ,"fastboot" , i915.fastboot); +seq_printf (m,"i915.%s=%#x\n" ,"prefault_disable" , i915.prefault_disable); +seq_printf (m,"i915.%s=%#x\n" ,"reset" , i915.reset); +seq_printf (m,"i915.%s=%#x\n" ,"disable_display" , i915.disable_display); +seq_printf (m,"i915.%s=%#x\n" ,"disable_vtd_wa" , i915.disable_vtd_wa); +seq_printf (m,"i915.%s=%d\n" ,"use_mmio_flip" , i915.use_mmio_flip); +seq_printf (m,"i915.%s=%#x\n" ,"mmio_debug" , i915.mmio_debug); +seq_printf (m,"i915.%s=%#x\n" ,"verbose_state_checks" , i915.verbose_state_checks); + +/* Print a message if new members have been added without this code being updated */ + extra =sizeof (struct i915_params ) + - offsetof(struct i915_params , verbose_state_checks) + -sizeof (i915.verbose_state_checks); +if (extra) +seq_printf (m,"Note: %lu bytes of padding or unknown options found after i915.%s\n" , + extra,"verbose_state_checks" ); + +return 0 ; +} +struct pipe_crc_info {const char *name;struct drm_device *dev;
@@ -4433,6 +4477,7 @@ static const struct drm_info_list i915_debugfs_list[] = { {"i915_dp_mst_info", i915_dp_mst_info, 0}, {"i915_wa_registers", i915_wa_registers, 0}, {"i915_ddb_info", i915_ddb_info, 0}, + {"i915_params", i915_params, 0}, };#define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)
Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 3 lines · Dave Gordon
It can be useful to know what the driver's parameters have ended up set to after sanitisation, so this commit adds a debugfs function to print the current values of all the module parameters.
What's wrong with eg. 'grep . /sys/module/i915/parameters/*' ?
Quoted 74 lines
--- drivers/gpu/drm/i915/i915_debugfs.c | 45 +++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+)drivers/gpu/drm/i915/i915_debugfs.c +45
-0@@ -2819,6 +2819,50 @@ static int i915_ddb_info(struct seq_file *m, void *unused)return 0 ; } +static int i915_params (struct seq_file *m,void *unused) +{ +size_t extra; + +seq_printf (m,"i915.%s=%d\n" ,"modeset" , i915.modeset); +seq_printf (m,"i915.%s=%d\n" ,"panel_ignore_lid" , i915.panel_ignore_lid); +seq_printf (m,"i915.%s=%u\n" ,"powersave" , i915.powersave); +seq_printf (m,"i915.%s=%d\n" ,"semaphores" , i915.semaphores); +seq_printf (m,"i915.%s=%u\n" ,"lvds_downclock" , i915.lvds_downclock); +seq_printf (m,"i915.%s=%d\n" ,"lvds_channel_mode" , i915.lvds_channel_mode); +seq_printf (m,"i915.%s=%d\n" ,"panel_use_ssc" , i915.panel_use_ssc); +seq_printf (m,"i915.%s=%d\n" ,"vbt_sdvo_panel_type" , i915.vbt_sdvo_panel_type); +seq_printf (m,"i915.%s=%d\n" ,"enable_rc6" , i915.enable_rc6); +seq_printf (m,"i915.%s=%d\n" ,"enable_fbc" , i915.enable_fbc); +seq_printf (m,"i915.%s=%d\n" ,"enable_ppgtt" , i915.enable_ppgtt); +seq_printf (m,"i915.%s=%d\n" ,"enable_execlists" , i915.enable_execlists); +seq_printf (m,"i915.%s=%d\n" ,"enable_psr" , i915.enable_psr); +seq_printf (m,"i915.%s=%u\n" ,"preliminary_hw_support" , i915.preliminary_hw_support); +seq_printf (m,"i915.%s=%d\n" ,"disable_power_well" , i915.disable_power_well); +seq_printf (m,"i915.%s=%d\n" ,"enable_ips" , i915.enable_ips); +seq_printf (m,"i915.%s=%d\n" ,"invert_brightness" , i915.invert_brightness); +seq_printf (m,"i915.%s=%d\n" ,"enable_cmd_parser" , i915.enable_cmd_parser); +/* leave bools at the end to not create holes */ +seq_printf (m,"i915.%s=%#x\n" ,"enable_hangcheck" , i915.enable_hangcheck); +seq_printf (m,"i915.%s=%#x\n" ,"fastboot" , i915.fastboot); +seq_printf (m,"i915.%s=%#x\n" ,"prefault_disable" , i915.prefault_disable); +seq_printf (m,"i915.%s=%#x\n" ,"reset" , i915.reset); +seq_printf (m,"i915.%s=%#x\n" ,"disable_display" , i915.disable_display); +seq_printf (m,"i915.%s=%#x\n" ,"disable_vtd_wa" , i915.disable_vtd_wa); +seq_printf (m,"i915.%s=%d\n" ,"use_mmio_flip" , i915.use_mmio_flip); +seq_printf (m,"i915.%s=%#x\n" ,"mmio_debug" , i915.mmio_debug); +seq_printf (m,"i915.%s=%#x\n" ,"verbose_state_checks" , i915.verbose_state_checks); + +/* Print a message if new members have been added without this code being updated */ + extra =sizeof (struct i915_params ) + - offsetof(struct i915_params , verbose_state_checks) + -sizeof (i915.verbose_state_checks); +if (extra) +seq_printf (m,"Note: %lu bytes of padding or unknown options found after i915.%s\n" , + extra,"verbose_state_checks" ); + +return 0 ; +} +struct pipe_crc_info {const char *name;struct drm_device *dev;@@ -4433,6 +4477,7 @@ static const struct drm_info_list i915_debugfs_list[] = { {"i915_dp_mst_info", i915_dp_mst_info, 0}, {"i915_wa_registers", i915_wa_registers, 0}, {"i915_ddb_info", i915_ddb_info, 0}, + {"i915_params", i915_params, 0}, };#define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 6 lines · Ville Syrjälä
Quoted 3 lines · Dave Gordon
It can be useful to know what the driver's parameters have ended up set to after sanitisation, so this commit adds a debugfs function to print the current values of all the module parameters.
What's wrong with eg. 'grep .
/sys/module/i915/parameters/*' ?
btw you can also set them through that interface at runtime if the paramter is rw. Really handy for debugging.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 6 lines · Ville Syrjälä
Quoted 3 lines · Dave Gordon
It can be useful to know what the driver's parameters have ended up set to after sanitisation, so this commit adds a debugfs function to print the current values of all the module parameters.
What's wrong with eg. 'grep .
/sys/module/i915/parameters/*' ?
What I really want are these captured in the error-state. Can be handy to know at times.
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Task id: 5633 -------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series Applied
PNV 353/353 353/353
ILK -1 355/355 354/355 SNB +2 399/422 401/422 IVB -1 486/487 485/487
BYT 296/296 296/296
HSW +1-2 507/508 506/508
BDW +2 399/402 401/402
-------------------------------------Detailed-------------------------------------
Platform Test drm-intel-nightly Series Applied
*ILK igt_gem_unfence_active_buffers PASS(2, M37M26) DMESG_WARN(1, M26) *SNB igt_kms_flip_event_leak NSPT(2, M35) PASS(1, M35) SNB igt_kms_flip_nonexisting-fb NSPT(1, M35)PASS(5, M35M22) PASS(1, M35) IVB igt_gem_storedw_batches_loop_secure-dispatch DMESG_WARN(1, M34)PASS(1, M21) DMESG_WARN(1, M34) *HSW igt_gem_pwrite_pread_uncached-copy-performance PASS(2, M19M40) DMESG_WARN(1, M40) HSW igt_gem_storedw_loop_blt DMESG_WARN(2, M19M20)PASS(4, M20M40) PASS(1, M40) *HSW igt_gem_storedw_loop_bsd PASS(2, M19M40) DMESG_WARN(1, M40) BDW igt_gem_pwrite_pread_display-pwrite-blt-gtt_mmap-performance DMESG_WARN(2, M28)PASS(3, M30M28) PASS(1, M30) BDW igt_gem_pwrite_pread_uncached-pwrite-blt-gtt_mmap-performance DMESG_WARN(2, M28M30)PASS(1, M28) PASS(1, M30)
Note: You need to pay more attention to line start with '*'
_______________________________________________
Intel-gfx mailing list [email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx