powerpc: drop more non-generic boards
Subsystems (5)
cover powerpc: drop more non-generic boards
Masahiro Yamada (8):
powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support
powerpc: mpc85xx: remove P1_P2_RDB boards
powerpc: mpc85xx: remove P2020COME board support
powerpc: mpc85xx: remove P2020DS board support
powerpc: ppc4xx: remove PPChameleonEVB, CATcenter boards
powerpc: mpc5xxx: remove Total5200 board support
powerpc: mpc5xxx: PM520 board support
powerpc: remove icecube_5200, Lite5200, cpci5200, mecp5200, pf5200
arch/powerpc/cpu/mpc5xxx/Kconfig | 24 - arch/powerpc/cpu/mpc5xxx/pci_mpc5200.c | 14 - arch/powerpc/cpu/mpc83xx/Kconfig | 8 - arch/powerpc/cpu/mpc85xx/Kconfig | 14 - arch/powerpc/cpu/ppc4xx/Kconfig | 7 - board/dave/PPChameleonEVB/Kconfig | 25 - board/dave/PPChameleonEVB/MAINTAINERS | 20 - board/dave/PPChameleonEVB/Makefile | 8 - board/dave/PPChameleonEVB/PPChameleonEVB.c | 231 -------- board/dave/PPChameleonEVB/flash.c | 99 ---- board/dave/PPChameleonEVB/nand.c | 99 ---- board/dave/PPChameleonEVB/u-boot.lds | 115 ---- board/esd/cpci5200/Kconfig | 12 - board/esd/cpci5200/MAINTAINERS | 6 - board/esd/cpci5200/Makefile | 14 - board/esd/cpci5200/cpci5200.c | 284 ---------- board/esd/cpci5200/mt46v16m16-75.h | 16 - board/esd/cpci5200/strataflash.c | 786 -------------------------- board/esd/mecp5200/Kconfig | 12 - board/esd/mecp5200/MAINTAINERS | 6 - board/esd/mecp5200/Makefile | 8 - board/esd/mecp5200/mecp5200.c | 251 --------- board/esd/mecp5200/mt46v16m16-75.h | 16 - board/esd/pf5200/Kconfig | 12 - board/esd/pf5200/MAINTAINERS | 6 - board/esd/pf5200/Makefile | 14 - board/esd/pf5200/flash.c | 445 --------------- board/esd/pf5200/mt46v16m16-75.h | 16 - board/esd/pf5200/pf5200.c | 357 ------------ board/freescale/common/pq-mds-pib.c | 2 +- board/freescale/mpc8360emds/Kconfig | 12 - board/freescale/mpc8360emds/MAINTAINERS | 15 - board/freescale/mpc8360emds/Makefile | 9 - board/freescale/mpc8360emds/README | 155 ----- board/freescale/mpc8360emds/mpc8360emds.c | 453 --------------- board/freescale/mpc8360emds/pci.c | 147 ----- board/freescale/mpc8360erdk/Kconfig | 12 - board/freescale/mpc8360erdk/MAINTAINERS | 7 - board/freescale/mpc8360erdk/Makefile | 9 - board/freescale/mpc8360erdk/mpc8360erdk.c | 350 ------------ board/freescale/mpc8360erdk/nand.c | 89 --- board/freescale/p1_p2_rdb/Kconfig | 12 - board/freescale/p1_p2_rdb/MAINTAINERS | 37 -- board/freescale/p1_p2_rdb/Makefile | 30 - board/freescale/p1_p2_rdb/README | 145 ----- board/freescale/p1_p2_rdb/ddr.c | 221 -------- board/freescale/p1_p2_rdb/law.c | 17 - board/freescale/p1_p2_rdb/p1_p2_rdb.c | 303 ---------- board/freescale/p1_p2_rdb/pci.c | 27 - board/freescale/p1_p2_rdb/spl.c | 141 ----- board/freescale/p1_p2_rdb/spl_minimal.c | 84 --- board/freescale/p1_p2_rdb/tlb.c | 91 --- board/freescale/p2020come/Kconfig | 12 - board/freescale/p2020come/MAINTAINERS | 7 - board/freescale/p2020come/Makefile | 10 - board/freescale/p2020come/ddr.c | 29 - board/freescale/p2020come/law.c | 23 - board/freescale/p2020come/p2020come.c | 275 --------- board/freescale/p2020come/tlb.c | 83 --- board/freescale/p2020ds/Kconfig | 12 - board/freescale/p2020ds/MAINTAINERS | 10 - board/freescale/p2020ds/Makefile | 12 - board/freescale/p2020ds/ddr.c | 129 ----- board/freescale/p2020ds/law.c | 20 - board/freescale/p2020ds/p2020ds.c | 263 --------- board/freescale/p2020ds/tlb.c | 90 --- board/icecube/Kconfig | 9 - board/icecube/MAINTAINERS | 21 - board/icecube/Makefile | 8 - board/icecube/README | 13 - board/icecube/README.Lite5200B_low_power | 22 - board/icecube/flash.c | 477 ---------------- board/icecube/icecube.c | 326 ----------- board/icecube/mt46v16m16-75.h | 16 - board/icecube/mt46v32m16.h | 16 - board/icecube/mt48lc16m16a2-75.h | 14 - board/pm520/Kconfig | 9 - board/pm520/MAINTAINERS | 9 - board/pm520/Makefile | 8 - board/pm520/flash.c | 659 ---------------------- board/pm520/mt46v16m16-75.h | 16 - board/pm520/mt48lc16m16a2-75.h | 14 - board/pm520/pm520.c | 253 --------- board/total5200/Kconfig | 9 - board/total5200/MAINTAINERS | 9 - board/total5200/Makefile | 8 - board/total5200/mt48lc16m16a2-75.h | 14 - board/total5200/mt48lc32m16a2-75.h | 19 - board/total5200/sdram.c | 159 ------ board/total5200/sdram.h | 18 - board/total5200/total5200.c | 276 --------- configs/CATcenter_25_defconfig | 4 - configs/CATcenter_33_defconfig | 4 - configs/CATcenter_defconfig | 4 - configs/Lite5200_LOWBOOT08_defconfig | 4 - configs/Lite5200_LOWBOOT_defconfig | 4 - configs/Lite5200_defconfig | 3 - configs/MPC8360EMDS_33_ATM_defconfig | 4 - configs/MPC8360EMDS_33_HOST_33_defconfig | 4 - configs/MPC8360EMDS_33_HOST_66_defconfig | 4 - configs/MPC8360EMDS_33_SLAVE_defconfig | 4 - configs/MPC8360EMDS_33_defconfig | 4 - configs/MPC8360EMDS_66_ATM_defconfig | 4 - configs/MPC8360EMDS_66_HOST_33_defconfig | 4 - configs/MPC8360EMDS_66_HOST_66_defconfig | 4 - configs/MPC8360EMDS_66_SLAVE_defconfig | 4 - configs/MPC8360EMDS_66_defconfig | 4 - configs/MPC8360ERDK_33_defconfig | 4 - configs/MPC8360ERDK_defconfig | 3 - configs/P1011RDB_36BIT_SDCARD_defconfig | 5 - configs/P1011RDB_36BIT_SPIFLASH_defconfig | 5 - configs/P1011RDB_36BIT_defconfig | 4 - configs/P1011RDB_NAND_defconfig | 6 - configs/P1011RDB_SDCARD_defconfig | 5 - configs/P1011RDB_SPIFLASH_defconfig | 5 - configs/P1011RDB_defconfig | 4 - configs/P1020RDB_36BIT_SDCARD_defconfig | 5 - configs/P1020RDB_36BIT_SPIFLASH_defconfig | 5 - configs/P1020RDB_36BIT_defconfig | 4 - configs/P1020RDB_NAND_defconfig | 6 - configs/P1020RDB_SDCARD_defconfig | 5 - configs/P1020RDB_SPIFLASH_defconfig | 5 - configs/P1020RDB_defconfig | 4 - configs/P2010RDB_36BIT_SDCARD_defconfig | 5 - configs/P2010RDB_36BIT_SPIFLASH_defconfig | 5 - configs/P2010RDB_36BIT_defconfig | 4 - configs/P2010RDB_NAND_defconfig | 6 - configs/P2010RDB_SDCARD_defconfig | 5 - configs/P2010RDB_SPIFLASH_defconfig | 5 - configs/P2010RDB_defconfig | 4 - configs/P2020COME_SDCARD_defconfig | 4 - configs/P2020COME_SPIFLASH_defconfig | 4 - configs/P2020DS_36BIT_defconfig | 4 - configs/P2020DS_DDR2_defconfig | 4 - configs/P2020DS_SDCARD_defconfig | 4 - configs/P2020DS_SPIFLASH_defconfig | 4 - configs/P2020DS_defconfig | 3 - configs/P2020RDB_36BIT_SDCARD_defconfig | 5 - configs/P2020RDB_36BIT_SPIFLASH_defconfig | 5 - configs/P2020RDB_36BIT_defconfig | 4 - configs/P2020RDB_NAND_defconfig | 6 - configs/P2020RDB_SDCARD_defconfig | 5 - configs/P2020RDB_SPIFLASH_defconfig | 5 - configs/P2020RDB_defconfig | 4 - configs/PM520_DDR_defconfig | 4 - configs/PM520_ROMBOOT_DDR_defconfig | 4 - configs/PM520_ROMBOOT_defconfig | 4 - configs/PM520_defconfig | 3 - configs/PPChameleonEVB_BA_25_defconfig | 4 - configs/PPChameleonEVB_BA_33_defconfig | 4 - configs/PPChameleonEVB_HI_25_defconfig | 4 - configs/PPChameleonEVB_HI_33_defconfig | 4 - configs/PPChameleonEVB_ME_25_defconfig | 4 - configs/PPChameleonEVB_ME_33_defconfig | 4 - configs/PPChameleonEVB_defconfig | 3 - configs/Total5200_Rev2_defconfig | 4 - configs/Total5200_Rev2_lowboot_defconfig | 4 - configs/Total5200_defconfig | 4 - configs/Total5200_lowboot_defconfig | 4 - configs/cpci5200_defconfig | 3 - configs/icecube_5200_DDR_LOWBOOT08_defconfig | 4 - configs/icecube_5200_DDR_LOWBOOT_defconfig | 4 - configs/icecube_5200_DDR_defconfig | 4 - configs/icecube_5200_LOWBOOT08_defconfig | 4 - configs/icecube_5200_LOWBOOT_defconfig | 4 - configs/icecube_5200_defconfig | 3 - configs/lite5200b_LOWBOOT_defconfig | 4 - configs/lite5200b_PM_defconfig | 4 - configs/lite5200b_defconfig | 4 - configs/mecp5200_defconfig | 3 - configs/pf5200_defconfig | 3 - doc/README.scrapyard | 27 +- drivers/mtd/nand/nand_base.c | 5 - drivers/net/mpc5xxx_fec.c | 5 - drivers/video/cfb_console.c | 3 - drivers/video/sed13806.c | 5 - include/configs/CATcenter.h | 750 ------------------------- include/configs/IceCube.h | 403 ------------- include/configs/MPC8360EMDS.h | 735 ------------------------ include/configs/MPC8360ERDK.h | 620 -------------------- include/configs/P1_P2_RDB.h | 808 --------------------------- include/configs/P2020COME.h | 547 ------------------ include/configs/P2020DS.h | 751 ------------------------- include/configs/PM520.h | 342 ------------ include/configs/PPChameleonEVB.h | 777 -------------------------- include/configs/Total5200.h | 386 ------------- include/configs/cpci5200.h | 390 ------------- include/configs/mecp5200.h | 319 ----------- include/configs/pf5200.h | 372 ------------ 189 files changed, 23 insertions(+), 16227 deletions(-) delete mode 100644 board/dave/PPChameleonEVB/Kconfig delete mode 100644 board/dave/PPChameleonEVB/MAINTAINERS delete mode 100644 board/dave/PPChameleonEVB/Makefile delete mode 100644 board/dave/PPChameleonEVB/PPChameleonEVB.c delete mode 100644 board/dave/PPChameleonEVB/flash.c delete mode 100644 board/dave/PPChameleonEVB/nand.c delete mode 100644 board/dave/PPChameleonEVB/u-boot.lds delete mode 100644 board/esd/cpci5200/Kconfig delete mode 100644 board/esd/cpci5200/MAINTAINERS delete mode 100644 board/esd/cpci5200/Makefile delete mode 100644 board/esd/cpci5200/cpci5200.c delete mode 100644 board/esd/cpci5200/mt46v16m16-75.h delete mode 100644 board/esd/cpci5200/strataflash.c delete mode 100644 board/esd/mecp5200/Kconfig delete mode 100644 board/esd/mecp5200/MAINTAINERS delete mode 100644 board/esd/mecp5200/Makefile delete mode 100644 board/esd/mecp5200/mecp5200.c delete mode 100644 board/esd/mecp5200/mt46v16m16-75.h delete mode 100644 board/esd/pf5200/Kconfig delete mode 100644 board/esd/pf5200/MAINTAINERS delete mode 100644 board/esd/pf5200/Makefile delete mode 100644 board/esd/pf5200/flash.c delete mode 100644 board/esd/pf5200/mt46v16m16-75.h delete mode 100644 board/esd/pf5200/pf5200.c delete mode 100644 board/freescale/mpc8360emds/Kconfig delete mode 100644 board/freescale/mpc8360emds/MAINTAINERS delete mode 100644 board/freescale/mpc8360emds/Makefile delete mode 100644 board/freescale/mpc8360emds/README delete mode 100644 board/freescale/mpc8360emds/mpc8360emds.c delete mode 100644 board/freescale/mpc8360emds/pci.c delete mode 100644 board/freescale/mpc8360erdk/Kconfig delete mode 100644 board/freescale/mpc8360erdk/MAINTAINERS delete mode 100644 board/freescale/mpc8360erdk/Makefile delete mode 100644 board/freescale/mpc8360erdk/mpc8360erdk.c delete mode 100644 board/freescale/mpc8360erdk/nand.c delete mode 100644 board/freescale/p1_p2_rdb/Kconfig delete mode 100644 board/freescale/p1_p2_rdb/MAINTAINERS delete mode 100644 board/freescale/p1_p2_rdb/Makefile delete mode 100644 board/freescale/p1_p2_rdb/README delete mode 100644 board/freescale/p1_p2_rdb/ddr.c delete mode 100644 board/freescale/p1_p2_rdb/law.c delete mode 100644 board/freescale/p1_p2_rdb/p1_p2_rdb.c delete mode 100644 board/freescale/p1_p2_rdb/pci.c delete mode 100644 board/freescale/p1_p2_rdb/spl.c delete mode 100644 board/freescale/p1_p2_rdb/spl_minimal.c delete mode 100644 board/freescale/p1_p2_rdb/tlb.c delete mode 100644 board/freescale/p2020come/Kconfig delete mode 100644 board/freescale/p2020come/MAINTAINERS delete mode 100644 board/freescale/p2020come/Makefile delete mode 100644 board/freescale/p2020come/ddr.c delete mode 100644 board/freescale/p2020come/law.c delete mode 100644 board/freescale/p2020come/p2020come.c delete mode 100644 board/freescale/p2020come/tlb.c delete mode 100644 board/freescale/p2020ds/Kconfig delete mode 100644 board/freescale/p2020ds/MAINTAINERS delete mode 100644 board/freescale/p2020ds/Makefile delete mode 100644 board/freescale/p2020ds/ddr.c delete mode 100644 board/freescale/p2020ds/law.c delete mode 100644 board/freescale/p2020ds/p2020ds.c delete mode 100644 board/freescale/p2020ds/tlb.c delete mode 100644 board/icecube/Kconfig delete mode 100644 board/icecube/MAINTAINERS delete mode 100644 board/icecube/Makefile delete mode 100644 board/icecube/README delete mode 100644 board/icecube/README.Lite5200B_low_power delete mode 100644 board/icecube/flash.c delete mode 100644 board/icecube/icecube.c delete mode 100644 board/icecube/mt46v16m16-75.h delete mode 100644 board/icecube/mt46v32m16.h delete mode 100644 board/icecube/mt48lc16m16a2-75.h delete mode 100644 board/pm520/Kconfig delete mode 100644 board/pm520/MAINTAINERS delete mode 100644 board/pm520/Makefile delete mode 100644 board/pm520/flash.c delete mode 100644 board/pm520/mt46v16m16-75.h delete mode 100644 board/pm520/mt48lc16m16a2-75.h delete mode 100644 board/pm520/pm520.c delete mode 100644 board/total5200/Kconfig delete mode 100644 board/total5200/MAINTAINERS delete mode 100644 board/total5200/Makefile delete mode 100644 board/total5200/mt48lc16m16a2-75.h delete mode 100644 board/total5200/mt48lc32m16a2-75.h delete mode 100644 board/total5200/sdram.c delete mode 100644 board/total5200/sdram.h delete mode 100644 board/total5200/total5200.c delete mode 100644 configs/CATcenter_25_defconfig delete mode 100644 configs/CATcenter_33_defconfig delete mode 100644 configs/CATcenter_defconfig delete mode 100644 configs/Lite5200_LOWBOOT08_defconfig delete mode 100644 configs/Lite5200_LOWBOOT_defconfig delete mode 100644 configs/Lite5200_defconfig delete mode 100644 configs/MPC8360EMDS_33_ATM_defconfig delete mode 100644 configs/MPC8360EMDS_33_HOST_33_defconfig delete mode 100644 configs/MPC8360EMDS_33_HOST_66_defconfig delete mode 100644 configs/MPC8360EMDS_33_SLAVE_defconfig delete mode 100644 configs/MPC8360EMDS_33_defconfig delete mode 100644 configs/MPC8360EMDS_66_ATM_defconfig delete mode 100644 configs/MPC8360EMDS_66_HOST_33_defconfig delete mode 100644 configs/MPC8360EMDS_66_HOST_66_defconfig delete mode 100644 configs/MPC8360EMDS_66_SLAVE_defconfig delete mode 100644 configs/MPC8360EMDS_66_defconfig delete mode 100644 configs/MPC8360ERDK_33_defconfig delete mode 100644 configs/MPC8360ERDK_defconfig delete mode 100644 configs/P1011RDB_36BIT_SDCARD_defconfig delete mode 100644 configs/P1011RDB_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P1011RDB_36BIT_defconfig delete mode 100644 configs/P1011RDB_NAND_defconfig delete mode 100644 configs/P1011RDB_SDCARD_defconfig delete mode 100644 configs/P1011RDB_SPIFLASH_defconfig delete mode 100644 configs/P1011RDB_defconfig delete mode 100644 configs/P1020RDB_36BIT_SDCARD_defconfig delete mode 100644 configs/P1020RDB_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P1020RDB_36BIT_defconfig delete mode 100644 configs/P1020RDB_NAND_defconfig delete mode 100644 configs/P1020RDB_SDCARD_defconfig delete mode 100644 configs/P1020RDB_SPIFLASH_defconfig delete mode 100644 configs/P1020RDB_defconfig delete mode 100644 configs/P2010RDB_36BIT_SDCARD_defconfig delete mode 100644 configs/P2010RDB_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P2010RDB_36BIT_defconfig delete mode 100644 configs/P2010RDB_NAND_defconfig delete mode 100644 configs/P2010RDB_SDCARD_defconfig delete mode 100644 configs/P2010RDB_SPIFLASH_defconfig delete mode 100644 configs/P2010RDB_defconfig delete mode 100644 configs/P2020COME_SDCARD_defconfig delete mode 100644 configs/P2020COME_SPIFLASH_defconfig delete mode 100644 configs/P2020DS_36BIT_defconfig delete mode 100644 configs/P2020DS_DDR2_defconfig delete mode 100644 configs/P2020DS_SDCARD_defconfig delete mode 100644 configs/P2020DS_SPIFLASH_defconfig delete mode 100644 configs/P2020DS_defconfig delete mode 100644 configs/P2020RDB_36BIT_SDCARD_defconfig delete mode 100644 configs/P2020RDB_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P2020RDB_36BIT_defconfig delete mode 100644 configs/P2020RDB_NAND_defconfig delete mode 100644 configs/P2020RDB_SDCARD_defconfig delete mode 100644 configs/P2020RDB_SPIFLASH_defconfig delete mode 100644 configs/P2020RDB_defconfig delete mode 100644 configs/PM520_DDR_defconfig delete mode 100644 configs/PM520_ROMBOOT_DDR_defconfig delete mode 100644 configs/PM520_ROMBOOT_defconfig delete mode 100644 configs/PM520_defconfig delete mode 100644 configs/PPChameleonEVB_BA_25_defconfig delete mode 100644 configs/PPChameleonEVB_BA_33_defconfig delete mode 100644 configs/PPChameleonEVB_HI_25_defconfig delete mode 100644 configs/PPChameleonEVB_HI_33_defconfig delete mode 100644 configs/PPChameleonEVB_ME_25_defconfig delete mode 100644 configs/PPChameleonEVB_ME_33_defconfig delete mode 100644 configs/PPChameleonEVB_defconfig delete mode 100644 configs/Total5200_Rev2_defconfig delete mode 100644 configs/Total5200_Rev2_lowboot_defconfig delete mode 100644 configs/Total5200_defconfig delete mode 100644 configs/Total5200_lowboot_defconfig delete mode 100644 configs/cpci5200_defconfig delete mode 100644 configs/icecube_5200_DDR_LOWBOOT08_defconfig delete mode 100644 configs/icecube_5200_DDR_LOWBOOT_defconfig delete mode 100644 configs/icecube_5200_DDR_defconfig delete mode 100644 configs/icecube_5200_LOWBOOT08_defconfig delete mode 100644 configs/icecube_5200_LOWBOOT_defconfig delete mode 100644 configs/icecube_5200_defconfig delete mode 100644 configs/lite5200b_LOWBOOT_defconfig delete mode 100644 configs/lite5200b_PM_defconfig delete mode 100644 configs/lite5200b_defconfig delete mode 100644 configs/mecp5200_defconfig delete mode 100644 configs/pf5200_defconfig delete mode 100644 include/configs/CATcenter.h delete mode 100644 include/configs/IceCube.h delete mode 100644 include/configs/MPC8360EMDS.h delete mode 100644 include/configs/MPC8360ERDK.h delete mode 100644 include/configs/P1_P2_RDB.h delete mode 100644 include/configs/P2020COME.h delete mode 100644 include/configs/P2020DS.h delete mode 100644 include/configs/PM520.h delete mode 100644 include/configs/PPChameleonEVB.h delete mode 100644 include/configs/Total5200.h delete mode 100644 include/configs/cpci5200.h delete mode 100644 include/configs/mecp5200.h delete mode 100644 include/configs/pf5200.h
Signature · 1 line
1.9.1
PATCH 1/8 powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support
These boards are still non-generic boards.
Signed-off-by Masahiro Yamada <[email protected]>
Cc Dave Liu <[email protected]>
Cc Anton Vorontsov <[email protected]>
---
arch/powerpc/cpu/mpc83xx/Kconfig | 8 - board/freescale/common/pq-mds-pib.c | 2 +- board/freescale/mpc8360emds/Kconfig | 12 - board/freescale/mpc8360emds/MAINTAINERS | 15 - board/freescale/mpc8360emds/Makefile | 9 - board/freescale/mpc8360emds/README | 155 ------- board/freescale/mpc8360emds/mpc8360emds.c | 453 ------------------ board/freescale/mpc8360emds/pci.c | 147 ------ board/freescale/mpc8360erdk/Kconfig | 12 - board/freescale/mpc8360erdk/MAINTAINERS | 7 - board/freescale/mpc8360erdk/Makefile | 9 - board/freescale/mpc8360erdk/mpc8360erdk.c | 350 -------------- board/freescale/mpc8360erdk/nand.c | 89 ---- configs/MPC8360EMDS_33_ATM_defconfig | 4 - configs/MPC8360EMDS_33_HOST_33_defconfig | 4 - configs/MPC8360EMDS_33_HOST_66_defconfig | 4 - configs/MPC8360EMDS_33_SLAVE_defconfig | 4 - configs/MPC8360EMDS_33_defconfig | 4 - configs/MPC8360EMDS_66_ATM_defconfig | 4 - configs/MPC8360EMDS_66_HOST_33_defconfig | 4 - configs/MPC8360EMDS_66_HOST_66_defconfig | 4 - configs/MPC8360EMDS_66_SLAVE_defconfig | 4 - configs/MPC8360EMDS_66_defconfig | 4 - configs/MPC8360ERDK_33_defconfig | 4 - configs/MPC8360ERDK_defconfig | 3 - doc/README.scrapyard | 12 +- include/configs/MPC8360EMDS.h | 735 ------------------------------ include/configs/MPC8360ERDK.h | 620 ------------------------- 28 files changed, 8 insertions(+), 2674 deletions(-) delete mode 100644 board/freescale/mpc8360emds/Kconfig delete mode 100644 board/freescale/mpc8360emds/MAINTAINERS delete mode 100644 board/freescale/mpc8360emds/Makefile delete mode 100644 board/freescale/mpc8360emds/README delete mode 100644 board/freescale/mpc8360emds/mpc8360emds.c delete mode 100644 board/freescale/mpc8360emds/pci.c delete mode 100644 board/freescale/mpc8360erdk/Kconfig delete mode 100644 board/freescale/mpc8360erdk/MAINTAINERS delete mode 100644 board/freescale/mpc8360erdk/Makefile delete mode 100644 board/freescale/mpc8360erdk/mpc8360erdk.c delete mode 100644 board/freescale/mpc8360erdk/nand.c delete mode 100644 configs/MPC8360EMDS_33_ATM_defconfig delete mode 100644 configs/MPC8360EMDS_33_HOST_33_defconfig delete mode 100644 configs/MPC8360EMDS_33_HOST_66_defconfig delete mode 100644 configs/MPC8360EMDS_33_SLAVE_defconfig delete mode 100644 configs/MPC8360EMDS_33_defconfig delete mode 100644 configs/MPC8360EMDS_66_ATM_defconfig delete mode 100644 configs/MPC8360EMDS_66_HOST_33_defconfig delete mode 100644 configs/MPC8360EMDS_66_HOST_66_defconfig delete mode 100644 configs/MPC8360EMDS_66_SLAVE_defconfig delete mode 100644 configs/MPC8360EMDS_66_defconfig delete mode 100644 configs/MPC8360ERDK_33_defconfig delete mode 100644 configs/MPC8360ERDK_defconfig delete mode 100644 include/configs/MPC8360EMDS.h delete mode 100644 include/configs/MPC8360ERDK.h
arch/powerpc/cpu/mpc83xx/Kconfig +0 -8
@@ -41,12 +41,6 @@ config TARGET_MPC8349EMDS config TARGET_MPC8349ITX bool "Support MPC8349ITX" -config TARGET_MPC8360EMDS - bool "Support MPC8360EMDS" - -config TARGET_MPC8360ERDK - bool "Support MPC8360ERDK" - config TARGET_MPC837XEMDS bool "Support MPC837XEMDS"
@@ -81,8 +75,6 @@ source "board/freescale/mpc8323erdb/Kconfig" source "board/freescale/mpc832xemds/Kconfig" source "board/freescale/mpc8349emds/Kconfig" source "board/freescale/mpc8349itx/Kconfig" -source "board/freescale/mpc8360emds/Kconfig" -source "board/freescale/mpc8360erdk/Kconfig" source "board/freescale/mpc837xemds/Kconfig" source "board/freescale/mpc837xerdb/Kconfig" source "board/ids/ids8313/Kconfig"
board/freescale/common/pq-mds-pib.c +1 -1
@@ -63,7 +63,7 @@ int pib_init(void)#endif #if defined(CONFIG_PQ_MDS_PIB_ATM ) -#if defined(CONFIG_MPC8360EMDS ) || defined(CONFIG_MPC8569MDS ) +#if defined(CONFIG_MPC8569MDS ) val8 =0 ;i2c_write (0x20 ,0x6 ,1 , &val8,1 );i2c_write (0x20 ,0x7 ,1 , &val8,1 );
board/freescale/mpc8360emds/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MPC8360EMDS - -config SYS_BOARD - default "mpc8360emds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8360EMDS" - -endif
board/freescale/mpc8360emds/MAINTAINERS deleted +0 -15
@@ -1,15 +0,0 @@ -MPC8360EMDS BOARD -M: Dave Liu <[email protected]> -S: Maintained -F: board/freescale/mpc8360emds/ -F: include/configs/MPC8360EMDS.h -F: configs/MPC8360EMDS_33_defconfig -F: configs/MPC8360EMDS_33_ATM_defconfig -F: configs/MPC8360EMDS_33_HOST_33_defconfig -F: configs/MPC8360EMDS_33_HOST_66_defconfig -F: configs/MPC8360EMDS_33_SLAVE_defconfig -F: configs/MPC8360EMDS_66_defconfig -F: configs/MPC8360EMDS_66_ATM_defconfig -F: configs/MPC8360EMDS_66_HOST_33_defconfig -F: configs/MPC8360EMDS_66_HOST_66_defconfig -F: configs/MPC8360EMDS_66_SLAVE_defconfig
board/freescale/mpc8360emds/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mpc8360emds.o -obj-$(CONFIG_PCI) += pci.o
board/freescale/mpc8360emds/README deleted +0 -155
155 lines not on this page · raw message
board/freescale/mpc8360emds/mpc8360emds.c deleted +0 -453
453 lines not on this page · raw message
board/freescale/mpc8360emds/pci.c deleted +0 -147
147 lines not on this page · raw message
board/freescale/mpc8360erdk/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MPC8360ERDK - -config SYS_BOARD - default "mpc8360erdk" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8360ERDK" - -endif
board/freescale/mpc8360erdk/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -MPC8360ERDK BOARD -#M: Anton Vorontsov <[email protected]> -S: Orphan (since 2014-03) -F: board/freescale/mpc8360erdk/ -F: include/configs/MPC8360ERDK.h -F: configs/MPC8360ERDK_defconfig -F: configs/MPC8360ERDK_33_defconfig
board/freescale/mpc8360erdk/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mpc8360erdk.o -obj-$(CONFIG_CMD_NAND) += nand.o
board/freescale/mpc8360erdk/mpc8360erdk.c deleted +0 -350
350 lines not on this page · raw message
board/freescale/mpc8360erdk/nand.c deleted +0 -89
89 lines not on this page · raw message
configs/MPC8360EMDS_33_ATM_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="CLKIN_33MHZ,PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1" -CONFIG_PPC=y -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8360EMDS=y
configs/MPC8360EMDS_33_HOST_33_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="CLKIN_33MHZ,PCI,PCI_33M,PQ_MDS_PIB=1" -CONFIG_PPC=y -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8360EMDS=y
configs/MPC8360EMDS_33_HOST_66_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="CLKIN_33MHZ,PCI,PCI_66M,PQ_MDS_PIB=1" -CONFIG_PPC=y -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8360EMDS=y
configs/MPC8360EMDS_33_SLAVE_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="CLKIN_33MHZ,PCI,PCISLAVE" -CONFIG_PPC=y -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8360EMDS=y
configs/MPC8360EMDS_33_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="CLKIN_33MHZ" -CONFIG_PPC=y -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8360EMDS=y
configs/MPC8360EMDS_66_ATM_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="CLKIN_66MHZ,PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1" -CONFIG_PPC=y -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8360EMDS=y
configs/MPC8360EMDS_66_HOST_33_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="CLKIN_66MHZ,PCI,PCI_33M,PQ_MDS_PIB=1" -CONFIG_PPC=y -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8360EMDS=y
configs/MPC8360EMDS_66_HOST_66_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="CLKIN_66MHZ,PCI,PCI_66M,PQ_MDS_PIB=1" -CONFIG_PPC=y -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8360EMDS=y
configs/MPC8360EMDS_66_SLAVE_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="CLKIN_66MHZ,PCI,PCISLAVE" -CONFIG_PPC=y -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8360EMDS=y
configs/MPC8360EMDS_66_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="CLKIN_66MHZ" -CONFIG_PPC=y -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8360EMDS=y
configs/MPC8360ERDK_33_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="CLKIN_33MHZ" -CONFIG_PPC=y -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8360ERDK=y
configs/MPC8360ERDK_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8360ERDK=y
doc/README.scrapyard +7 -5
@@ -12,11 +12,13 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -P3G4 powerpc 74xx_7xx - - Wolfgang Denk <[email protected]> -ZUMA powerpc 74xx_7xx - - Nye Liu <[email protected]> -ppmc7xx powerpc 74xx_7xx - - -ELPPC powerpc 74xx_7xx - - -mpc7448hpc2 powerpc 74xx_7xx - - Roy Zang <[email protected]> +MPC8360EMDS powerpc mpc83xx - - Dave Liu <[email protected]> +MPC8360ERDK powerpc mpc83xx - - Anton Vorontsov <[email protected]> +P3G4 powerpc 74xx_7xx d928664f 2015-01-16 Wolfgang Denk <[email protected]> +ZUMA powerpc 74xx_7xx d928664f 2015-01-16 Nye Liu <[email protected]> +ppmc7xx powerpc 74xx_7xx d928664f 2015-01-16 +ELPPC powerpc 74xx_7xx d928664f 2015-01-16 +mpc7448hpc2 powerpc 74xx_7xx d928664f 2015-01-16 Roy Zang <[email protected]> CPCI405 ppc4xx 405gp 5f1459dc 2015-01-13 Matthias Fuchs <[email protected]> CPCI405DT ppc4xx 405gpr 5f1459dc 2015-01-13 Matthias Fuchs <[email protected]> CPCI405AB ppc4xx 405gpr 5f1459dc 2015-01-13 Matthias Fuchs <[email protected]>
include/configs/MPC8360EMDS.h deleted +0 -735
735 lines not on this page · raw message
include/configs/MPC8360ERDK.h deleted +0 -620
620 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH 1/8 powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support
Quoted 5 lines · Masahiro Yamada
These boards are still non-generic boards.
Signed-off-by Masahiro Yamada <[email protected]>Cc Dave Liu <[email protected]>Cc Anton Vorontsov <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150123/8a5e780e/attachment.pgp>
PATCH 2/8 powerpc: mpc85xx: remove P1_P2_RDB boards
In reply to Masahiro YamadaThese boards are still non-generic boards:
P1011RDB, P1022RDB, P2010RDB, P2020RDB
Signed-off-by Masahiro Yamada <[email protected]>
Cc Poonam Aggrwal <[email protected]>
---
arch/powerpc/cpu/mpc85xx/Kconfig | 6 - board/freescale/p1_p2_rdb/Kconfig | 12 - board/freescale/p1_p2_rdb/MAINTAINERS | 37 -- board/freescale/p1_p2_rdb/Makefile | 30 -- board/freescale/p1_p2_rdb/README | 145 ------ board/freescale/p1_p2_rdb/ddr.c | 221 -------- board/freescale/p1_p2_rdb/law.c | 17 - board/freescale/p1_p2_rdb/p1_p2_rdb.c | 303 ----------- board/freescale/p1_p2_rdb/pci.c | 27 - board/freescale/p1_p2_rdb/spl.c | 141 ------ board/freescale/p1_p2_rdb/spl_minimal.c | 84 ---- board/freescale/p1_p2_rdb/tlb.c | 91 ---- configs/P1011RDB_36BIT_SDCARD_defconfig | 5 - configs/P1011RDB_36BIT_SPIFLASH_defconfig | 5 - configs/P1011RDB_36BIT_defconfig | 4 - configs/P1011RDB_NAND_defconfig | 6 - configs/P1011RDB_SDCARD_defconfig | 5 - configs/P1011RDB_SPIFLASH_defconfig | 5 - configs/P1011RDB_defconfig | 4 - configs/P1020RDB_36BIT_SDCARD_defconfig | 5 - configs/P1020RDB_36BIT_SPIFLASH_defconfig | 5 - configs/P1020RDB_36BIT_defconfig | 4 - configs/P1020RDB_NAND_defconfig | 6 - configs/P1020RDB_SDCARD_defconfig | 5 - configs/P1020RDB_SPIFLASH_defconfig | 5 - configs/P1020RDB_defconfig | 4 - configs/P2010RDB_36BIT_SDCARD_defconfig | 5 - configs/P2010RDB_36BIT_SPIFLASH_defconfig | 5 - configs/P2010RDB_36BIT_defconfig | 4 - configs/P2010RDB_NAND_defconfig | 6 - configs/P2010RDB_SDCARD_defconfig | 5 - configs/P2010RDB_SPIFLASH_defconfig | 5 - configs/P2010RDB_defconfig | 4 - configs/P2020RDB_36BIT_SDCARD_defconfig | 5 - configs/P2020RDB_36BIT_SPIFLASH_defconfig | 5 - configs/P2020RDB_36BIT_defconfig | 4 - configs/P2020RDB_NAND_defconfig | 6 - configs/P2020RDB_SDCARD_defconfig | 5 - configs/P2020RDB_SPIFLASH_defconfig | 5 - configs/P2020RDB_defconfig | 4 - doc/README.scrapyard | 4 + include/configs/P1_P2_RDB.h | 808 ------------------------------ 42 files changed, 4 insertions(+), 2058 deletions(-) delete mode 100644 board/freescale/p1_p2_rdb/Kconfig delete mode 100644 board/freescale/p1_p2_rdb/MAINTAINERS delete mode 100644 board/freescale/p1_p2_rdb/Makefile delete mode 100644 board/freescale/p1_p2_rdb/README delete mode 100644 board/freescale/p1_p2_rdb/ddr.c delete mode 100644 board/freescale/p1_p2_rdb/law.c delete mode 100644 board/freescale/p1_p2_rdb/p1_p2_rdb.c delete mode 100644 board/freescale/p1_p2_rdb/pci.c delete mode 100644 board/freescale/p1_p2_rdb/spl.c delete mode 100644 board/freescale/p1_p2_rdb/spl_minimal.c delete mode 100644 board/freescale/p1_p2_rdb/tlb.c delete mode 100644 configs/P1011RDB_36BIT_SDCARD_defconfig delete mode 100644 configs/P1011RDB_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P1011RDB_36BIT_defconfig delete mode 100644 configs/P1011RDB_NAND_defconfig delete mode 100644 configs/P1011RDB_SDCARD_defconfig delete mode 100644 configs/P1011RDB_SPIFLASH_defconfig delete mode 100644 configs/P1011RDB_defconfig delete mode 100644 configs/P1020RDB_36BIT_SDCARD_defconfig delete mode 100644 configs/P1020RDB_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P1020RDB_36BIT_defconfig delete mode 100644 configs/P1020RDB_NAND_defconfig delete mode 100644 configs/P1020RDB_SDCARD_defconfig delete mode 100644 configs/P1020RDB_SPIFLASH_defconfig delete mode 100644 configs/P1020RDB_defconfig delete mode 100644 configs/P2010RDB_36BIT_SDCARD_defconfig delete mode 100644 configs/P2010RDB_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P2010RDB_36BIT_defconfig delete mode 100644 configs/P2010RDB_NAND_defconfig delete mode 100644 configs/P2010RDB_SDCARD_defconfig delete mode 100644 configs/P2010RDB_SPIFLASH_defconfig delete mode 100644 configs/P2010RDB_defconfig delete mode 100644 configs/P2020RDB_36BIT_SDCARD_defconfig delete mode 100644 configs/P2020RDB_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P2020RDB_36BIT_defconfig delete mode 100644 configs/P2020RDB_NAND_defconfig delete mode 100644 configs/P2020RDB_SDCARD_defconfig delete mode 100644 configs/P2020RDB_SPIFLASH_defconfig delete mode 100644 configs/P2020RDB_defconfig delete mode 100644 include/configs/P1_P2_RDB.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -6
@@ -85,11 +85,6 @@ config TARGET_P1022DS config TARGET_P1023RDB bool "Support P1023RDB" -config TARGET_P1_P2_RDB - bool "Support P1_P2_RDB" - select SUPPORT_SPL - select SUPPORT_TPL - config TARGET_P1_P2_RDB_PC bool "Support p1_p2_rdb_pc" select SUPPORT_SPL
@@ -184,7 +179,6 @@ source "board/freescale/mpc8572ds/Kconfig" source "board/freescale/p1010rdb/Kconfig" source "board/freescale/p1022ds/Kconfig" source "board/freescale/p1023rdb/Kconfig" -source "board/freescale/p1_p2_rdb/Kconfig" source "board/freescale/p1_p2_rdb_pc/Kconfig" source "board/freescale/p1_twr/Kconfig" source "board/freescale/p2020come/Kconfig"
board/freescale/p1_p2_rdb/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_P1_P2_RDB - -config SYS_BOARD - default "p1_p2_rdb" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "P1_P2_RDB" - -endif
board/freescale/p1_p2_rdb/MAINTAINERS deleted +0 -37
@@ -1,37 +0,0 @@ -P1_P2_RDB BOARD -#M: - -S: Maintained -F: board/freescale/p1_p2_rdb/ -F: include/configs/P1_P2_RDB.h -F: configs/P1011RDB_defconfig -F: configs/P1011RDB_36BIT_defconfig -F: configs/P1011RDB_36BIT_SDCARD_defconfig -F: configs/P1011RDB_36BIT_SPIFLASH_defconfig -F: configs/P1011RDB_NAND_defconfig -F: configs/P1011RDB_SDCARD_defconfig -F: configs/P1011RDB_SPIFLASH_defconfig -F: configs/P1020RDB_defconfig -F: configs/P1020RDB_36BIT_defconfig -F: configs/P1020RDB_36BIT_SDCARD_defconfig -F: configs/P1020RDB_36BIT_SPIFLASH_defconfig -F: configs/P1020RDB_NAND_defconfig -F: configs/P1020RDB_SDCARD_defconfig -F: configs/P1020RDB_SPIFLASH_defconfig -F: configs/P2010RDB_defconfig -F: configs/P2010RDB_36BIT_defconfig -F: configs/P2010RDB_36BIT_SDCARD_defconfig -F: configs/P2010RDB_36BIT_SPIFLASH_defconfig -F: configs/P2010RDB_NAND_defconfig -F: configs/P2010RDB_SDCARD_defconfig -F: configs/P2010RDB_SPIFLASH_defconfig -F: configs/P2020RDB_36BIT_defconfig -F: configs/P2020RDB_36BIT_SDCARD_defconfig -F: configs/P2020RDB_36BIT_SPIFLASH_defconfig -F: configs/P2020RDB_NAND_defconfig -F: configs/P2020RDB_SDCARD_defconfig -F: configs/P2020RDB_SPIFLASH_defconfig - -P2020RDB BOARD -M: Poonam Aggrwal <[email protected]> -S: Maintained -F: configs/P2020RDB_defconfig
board/freescale/p1_p2_rdb/Makefile deleted +0 -30
@@ -1,30 +0,0 @@ -# -# Copyright 2009 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -MINIMAL= - -ifdef CONFIG_SPL_BUILD -ifdef CONFIG_SPL_INIT_MINIMAL -MINIMAL=y -endif -endif - -ifdef MINIMAL - -obj-y += spl_minimal.o tlb.o law.o - -else -ifdef CONFIG_SPL_BUILD -obj-y += spl.o -else -obj-y += p1_p2_rdb.o -obj-$(CONFIG_PCI) += pci.o -endif -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o - -endif
board/freescale/p1_p2_rdb/README deleted +0 -145
145 lines not on this page · raw message
board/freescale/p1_p2_rdb/ddr.c deleted +0 -221
221 lines not on this page · raw message
board/freescale/p1_p2_rdb/law.c deleted +0 -17
@@ -1,17 +0,0 @@ -/* -* Copyright 2009-2010 Freescale Semiconductor, Inc. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -struct law_entry law_table[] = { -SET_LAW (CONFIG_SYS_FLASH_BASE_PHYS ,LAW_SIZE_16M ,LAW_TRGT_IF_LBC ), -SET_LAW (CONFIG_SYS_VSC7385_BASE_PHYS ,LAW_SIZE_128K ,LAW_TRGT_IF_LBC ), -SET_LAW (CONFIG_SYS_NAND_BASE_PHYS ,LAW_SIZE_1M ,LAW_TRGT_IF_LBC ), -}; - -int num_law_entries =ARRAY_SIZE (law_table);
board/freescale/p1_p2_rdb/p1_p2_rdb.c deleted +0 -303
303 lines not on this page · raw message
board/freescale/p1_p2_rdb/pci.c deleted +0 -27
@@ -1,27 +0,0 @@ -/* -* Copyright 2009-2010 Freescale Semiconductor, Inc. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <command.h> -#include <pci.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_serdes.h> -#include <asm/io.h> -#include <asm/fsl_pci.h> -#include <libfdt.h> -#include <fdt_support.h> - -DECLARE_GLOBAL_DATA_PTR ; - -void pci_init_board (void ) -{ -fsl_pcie_init_board (0 ); -} - -void ft_pci_board_setup (void *blob) -{ -FT_FSL_PCI_SETUP ; -}
board/freescale/p1_p2_rdb/spl.c deleted +0 -141
141 lines not on this page · raw message
board/freescale/p1_p2_rdb/spl_minimal.c deleted +0 -84
84 lines not on this page · raw message
board/freescale/p1_p2_rdb/tlb.c deleted +0 -91
91 lines not on this page · raw message
configs/P1011RDB_36BIT_SDCARD_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB,36BIT,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P1011RDB_36BIT_SPIFLASH_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB,36BIT,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P1011RDB_36BIT_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB,36BIT" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y
configs/P1011RDB_NAND_defconfig deleted +0 -6
@@ -1,6 +0,0 @@ -CONFIG_SPL=y -CONFIG_TPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB,NAND" -+ST:CONFIG_PPC=y -+ST:CONFIG_MPC85xx=y -+ST:CONFIG_TARGET_P1_P2_RDB=y
configs/P1011RDB_SDCARD_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P1011RDB_SPIFLASH_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P1011RDB_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y
configs/P1020RDB_36BIT_SDCARD_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB,36BIT,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P1020RDB_36BIT_SPIFLASH_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB,36BIT,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P1020RDB_36BIT_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB,36BIT" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y
configs/P1020RDB_NAND_defconfig deleted +0 -6
@@ -1,6 +0,0 @@ -CONFIG_SPL=y -CONFIG_TPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB,NAND" -+ST:CONFIG_PPC=y -+ST:CONFIG_MPC85xx=y -+ST:CONFIG_TARGET_P1_P2_RDB=y
configs/P1020RDB_SDCARD_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P1020RDB_SPIFLASH_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P1020RDB_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y
configs/P2010RDB_36BIT_SDCARD_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB,36BIT,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P2010RDB_36BIT_SPIFLASH_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB,36BIT,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P2010RDB_36BIT_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB,36BIT" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y
configs/P2010RDB_NAND_defconfig deleted +0 -6
@@ -1,6 +0,0 @@ -CONFIG_SPL=y -CONFIG_TPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB,NAND" -+ST:CONFIG_PPC=y -+ST:CONFIG_MPC85xx=y -+ST:CONFIG_TARGET_P1_P2_RDB=y
configs/P2010RDB_SDCARD_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P2010RDB_SPIFLASH_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P2010RDB_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y
configs/P2020RDB_36BIT_SDCARD_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P2020RDB_36BIT_SPIFLASH_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P2020RDB_36BIT_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y
configs/P2020RDB_NAND_defconfig deleted +0 -6
@@ -1,6 +0,0 @@ -CONFIG_SPL=y -CONFIG_TPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,NAND" -+ST:CONFIG_PPC=y -+ST:CONFIG_MPC85xx=y -+ST:CONFIG_TARGET_P1_P2_RDB=y
configs/P2020RDB_SDCARD_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P2020RDB_SPIFLASH_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y
configs/P2020RDB_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y
doc/README.scrapyard +4 -0
@@ -12,6 +12,10 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +P2020RDB powerpc mpc85xx - - Poonam Aggrwal <[email protected]> +P2010RDB powerpc mpc85xx - - +P1020RDB powerpc mpc85xx - - +P1011RDB powerpc mpc85xx - - MPC8360EMDS powerpc mpc83xx - - Dave Liu <[email protected]> MPC8360ERDK powerpc mpc83xx - - Anton Vorontsov <[email protected]> P3G4 powerpc 74xx_7xx d928664f 2015-01-16 Wolfgang Denk <[email protected]>
include/configs/P1_P2_RDB.h deleted +0 -808
808 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH 2/8 powerpc: mpc85xx: remove P1_P2_RDB boards
Quoted 5 lines · Masahiro Yamada
These boards are still non-generic boards:
P1011RDB, P1022RDB, P2010RDB, P2020RDBSigned-off-by Masahiro Yamada <[email protected]>Cc Poonam Aggrwal <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150123/d74cf510/attachment.pgp>
PATCH 3/8 powerpc: mpc85xx: remove P2020COME board support
In reply to Masahiro YamadaThis board is still a non-generic board.
Signed-off-by Masahiro Yamada <[email protected]>
Cc Ira W. Snyder <[email protected]>
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/p2020come/Kconfig | 12 - board/freescale/p2020come/MAINTAINERS | 7 - board/freescale/p2020come/Makefile | 10 - board/freescale/p2020come/ddr.c | 29 -- board/freescale/p2020come/law.c | 23 -- board/freescale/p2020come/p2020come.c | 275 ----------------- board/freescale/p2020come/tlb.c | 83 ------ configs/P2020COME_SDCARD_defconfig | 4 - configs/P2020COME_SPIFLASH_defconfig | 4 - doc/README.scrapyard | 1 + include/configs/P2020COME.h | 547 ---------------------------------- 12 files changed, 1 insertion(+), 998 deletions(-) delete mode 100644 board/freescale/p2020come/Kconfig delete mode 100644 board/freescale/p2020come/MAINTAINERS delete mode 100644 board/freescale/p2020come/Makefile delete mode 100644 board/freescale/p2020come/ddr.c delete mode 100644 board/freescale/p2020come/law.c delete mode 100644 board/freescale/p2020come/p2020come.c delete mode 100644 board/freescale/p2020come/tlb.c delete mode 100644 configs/P2020COME_SDCARD_defconfig delete mode 100644 configs/P2020COME_SPIFLASH_defconfig delete mode 100644 include/configs/P2020COME.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
@@ -93,9 +93,6 @@ config TARGET_P1_P2_RDB_PC config TARGET_P1_TWR bool "Support p1_twr" -config TARGET_P2020COME - bool "Support P2020COME" - config TARGET_P2020DS bool "Support P2020DS"
@@ -181,7 +178,6 @@ source "board/freescale/p1022ds/Kconfig" source "board/freescale/p1023rdb/Kconfig" source "board/freescale/p1_p2_rdb_pc/Kconfig" source "board/freescale/p1_twr/Kconfig" -source "board/freescale/p2020come/Kconfig" source "board/freescale/p2020ds/Kconfig" source "board/freescale/p2041rdb/Kconfig" source "board/freescale/qemu-ppce500/Kconfig"
board/freescale/p2020come/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_P2020COME - -config SYS_BOARD - default "p2020come" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "P2020COME" - -endif
board/freescale/p2020come/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -P2020COME BOARD -M: Ira W. Snyder <[email protected]> -S: Maintained -F: board/freescale/p2020come/ -F: include/configs/P2020COME.h -F: configs/P2020COME_SDCARD_defconfig -F: configs/P2020COME_SPIFLASH_defconfig
board/freescale/p2020come/Makefile deleted +0 -10
@@ -1,10 +0,0 @@ -# -# Copyright 2009 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += p2020come.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o
board/freescale/p2020come/ddr.c deleted +0 -29
@@ -1,29 +0,0 @@ -/* -* Copyright 2009, 2011 Freescale Semiconductor, Inc. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ -#include <common.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -void fsl_ddr_board_options (memctl_options_t *popts, -dimm_params_t *pdimm, -unsigned int ctrl_num) -{ -if (ctrl_num) { -printf ("Wrong parameter for controller number %d" , ctrl_num); -return ; - } - -if (!pdimm->n_ranks) -return ; - -/* -* Set DDR_SDRAM_CLK_CNTL = 0x02800000 -* -* Clock is launched 5/8 applied cycle after address/command -*/ - popts->clk_adjust =5 ; -}
board/freescale/p2020come/law.c deleted +0 -23
@@ -1,23 +0,0 @@ -/* -* Copyright 2009 Freescale Semiconductor, Inc. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* -* Create a dummy LAW entry for the DDR SDRAM which will be replaced when -* the DDR SPD setup code runs. -* -* This table would be empty, except that it is used before the BSS section is -* initialized, and therefore must have at least one entry to push it into -* the DATA section. -*/ -struct law_entry law_table[] = { -SET_LAW (CONFIG_SYS_SDRAM_BASE ,LAW_SIZE_4K ,LAW_TRGT_IF_DDR ), -}; - -int num_law_entries =ARRAY_SIZE (law_table);
board/freescale/p2020come/p2020come.c deleted +0 -275
275 lines not on this page · raw message
board/freescale/p2020come/tlb.c deleted +0 -83
83 lines not on this page · raw message
configs/P2020COME_SDCARD_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SDCARD" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020COME=y
configs/P2020COME_SPIFLASH_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020COME=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +P2020COME powerpc mpc85xx - - Ira W. Snyder <[email protected]> P2020RDB powerpc mpc85xx - - Poonam Aggrwal <[email protected]> P2010RDB powerpc mpc85xx - - P1020RDB powerpc mpc85xx - -
include/configs/P2020COME.h deleted +0 -547
547 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH 3/8 powerpc: mpc85xx: remove P2020COME board support
Quoted 2 lines · Masahiro Yamada
This board is still a non-generic board.
Hi Masahiro,
This is fine by me. I no longer work for Caltech OVRO, and therefore no longer have access to this hardware.
Freescale still has these boards for sale. Their team may want to maintain the board.
Thanks,
Ira
Quoted 1,119 lines
Signed-off-by Masahiro Yamada <[email protected]>Cc Ira W. Snyder <[email protected]>---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/p2020come/Kconfig | 12 - board/freescale/p2020come/MAINTAINERS | 7 - board/freescale/p2020come/Makefile | 10 - board/freescale/p2020come/ddr.c | 29 -- board/freescale/p2020come/law.c | 23 -- board/freescale/p2020come/p2020come.c | 275 ----------------- board/freescale/p2020come/tlb.c | 83 ------ configs/P2020COME_SDCARD_defconfig | 4 - configs/P2020COME_SPIFLASH_defconfig | 4 - doc/README.scrapyard | 1 + include/configs/P2020COME.h | 547 ---------------------------------- 12 files changed, 1 insertion(+), 998 deletions(-) delete mode 100644 board/freescale/p2020come/Kconfig delete mode 100644 board/freescale/p2020come/MAINTAINERS delete mode 100644 board/freescale/p2020come/Makefile delete mode 100644 board/freescale/p2020come/ddr.c delete mode 100644 board/freescale/p2020come/law.c delete mode 100644 board/freescale/p2020come/p2020come.c delete mode 100644 board/freescale/p2020come/tlb.c delete mode 100644 configs/P2020COME_SDCARD_defconfig delete mode 100644 configs/P2020COME_SPIFLASH_defconfig delete mode 100644 include/configs/P2020COME.harch/powerpc/cpu/mpc85xx/Kconfig +0
-4@@ -93,9 +93,6 @@ config TARGET_P1_P2_RDB_PC config TARGET_P1_TWR bool "Support p1_twr" -config TARGET_P2020COME - bool "Support P2020COME" - config TARGET_P2020DS bool "Support P2020DS"@@ -181,7 +178,6 @@ source "board/freescale/p1022ds/Kconfig" source "board/freescale/p1023rdb/Kconfig" source "board/freescale/p1_p2_rdb_pc/Kconfig" source "board/freescale/p1_twr/Kconfig" -source "board/freescale/p2020come/Kconfig" source "board/freescale/p2020ds/Kconfig" source "board/freescale/p2041rdb/Kconfig" source "board/freescale/qemu-ppce500/Kconfig"board/freescale/p2020come/Kconfig deleted +0
-12@@ -1,12 +0,0 @@ -if TARGET_P2020COME - -config SYS_BOARD - default "p2020come" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "P2020COME" - -endifboard/freescale/p2020come/MAINTAINERS deleted +0
-7@@ -1,7 +0,0 @@ -P2020COME BOARD -M: Ira W. Snyder <[email protected]> -S: Maintained -F: board/freescale/p2020come/ -F: include/configs/P2020COME.h -F: configs/P2020COME_SDCARD_defconfig -F: configs/P2020COME_SPIFLASH_defconfigboard/freescale/p2020come/Makefile deleted +0
-10@@ -1,10 +0,0 @@ -# -# Copyright 2009 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += p2020come.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.oboard/freescale/p2020come/ddr.c deleted +0
-29@@ -1,29 +0,0 @@ -/* -* Copyright 2009, 2011 Freescale Semiconductor, Inc. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ -#include <common.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -void fsl_ddr_board_options (memctl_options_t *popts, -dimm_params_t *pdimm, -unsigned int ctrl_num) -{ -if (ctrl_num) { -printf ("Wrong parameter for controller number %d" , ctrl_num); -return ; - } - -if (!pdimm->n_ranks) -return ; - -/* -* Set DDR_SDRAM_CLK_CNTL = 0x02800000 -* -* Clock is launched 5/8 applied cycle after address/command -*/ - popts->clk_adjust =5 ; -}board/freescale/p2020come/law.c deleted +0
-23@@ -1,23 +0,0 @@ -/* -* Copyright 2009 Freescale Semiconductor, Inc. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* -* Create a dummy LAW entry for the DDR SDRAM which will be replaced when -* the DDR SPD setup code runs. -* -* This table would be empty, except that it is used before the BSS section is -* initialized, and therefore must have at least one entry to push it into -* the DATA section. -*/ -struct law_entry law_table[] = { -SET_LAW (CONFIG_SYS_SDRAM_BASE ,LAW_SIZE_4K ,LAW_TRGT_IF_DDR ), -}; - -int num_law_entries =ARRAY_SIZE (law_table);board/freescale/p2020come/p2020come.c deleted +0
-275@@ -1,275 +0,0 @@ -/* -* Copyright 2009,2012 Freescale Semiconductor, Inc. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <hwconfig.h> -#include <command.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/cache.h> -#include <asm/immap_85xx.h> -#include <asm/mpc85xx_gpio.h> -#include <asm/fsl_serdes.h> -#include <asm/io.h> -#include <miiphy.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <fsl_mdio.h> -#include <tsec.h> -#include <vsc7385.h> -#include <netdev.h> -#include <mmc.h> -#include <malloc.h> -#include <i2c.h> - -#if defined(CONFIG_PCI ) -#include <asm/fsl_pci.h> -#include <pci.h> -#endif - -DECLARE_GLOBAL_DATA_PTR ; - -#if defined(CONFIG_PCI ) -void pci_init_board (void ) -{ -fsl_pcie_init_board (0 ); -} - -void ft_pci_board_setup (void *blob) -{ -FT_FSL_PCI_SETUP ; -} -#endif - -#define BOARD_PERI_RST_SET (VSC7385_RST_SET | SLIC_RST_SET | \ - SGMII_PHY_RST_SET | PCIE_RST_SET | \ - RGMII_PHY_RST_SET) - -#define SYSCLK_MASK 0x00200000 -#define BOARDREV_MASK 0x10100000 -#define BOARDREV_B 0x10100000 -#define BOARDREV_C 0x00100000 -#define BOARDREV_D 0x00000000 - -#define SYSCLK_66 66666666 -#define SYSCLK_50 50000000 -#define SYSCLK_100 100000000 - -unsigned long get_board_sys_clk (ulong dummy) -{ -ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -u32 ddr_ratio =in_be32 (&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO; - - ddr_ratio >>= MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; -switch (ddr_ratio) { -case 0x0C : -return SYSCLK_66 ; -case 0x0A : -case 0x08 : -return SYSCLK_100 ; -default : -puts ("ERROR: unknown DDR ratio\n" ); -return SYSCLK_100 ; - } -} - -unsigned long get_board_ddr_clk (ulong dummy) -{ -ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -u32 ddr_ratio =in_be32 (&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO; - - ddr_ratio >>= MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; -switch (ddr_ratio) { -case 0x0C : -case 0x0A : -return SYSCLK_66 ; -case 0x08 : -return SYSCLK_100 ; -default : -puts ("ERROR: unknown DDR ratio\n" ); -return SYSCLK_100 ; - } -} - -#ifdef CONFIG_MMC -int board_early_init_f (void ) -{ -ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - -setbits_be32 (&gur->pmuxcr, - (MPC85xx_PMUXCR_SDHC_CD | - MPC85xx_PMUXCR_SDHC_WP)); - -/* All the device are enable except for SRIO12 */ -setbits_be32 (&gur->devdisr, MPC85xx_DEVDISR_SRIO); -return 0 ; -} -#endif - -#define GPIO_DIR 0x0f3a0000 -#define GPIO_ODR 0x00000000 -#define GPIO_DAT 0x001a0000 - -int checkboard (void ) -{ -ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR +0xC00 ); - -/* -* GPIO -* 0 - 3: CarryBoard Input; -* 4 - 7: CarryBoard Output; -* 8 : Mux as SDHC_CD (card detection) -* 9 : Mux as SDHC_WP -* 10 : Clear Watchdog timer -* 11 : LED Input -* 12 : Output to 1 -* 13 : Open Drain -* 14 : LED Output -* 15 : Switch Input -* -* Set GPIOs 11, 12, 14 to 1. -*/ -out_be32 (&pgpio->gpodr,GPIO_ODR ); -mpc85xx_gpio_set (0xffffffff ,GPIO_DIR ,GPIO_DAT ); - -puts ("Board: Freescale COM Express P2020\n" ); -return 0 ; -} - -#define M41ST85W_I2C_BUS 1 -#define M41ST85W_I2C_ADDR 0x68 -#define M41ST85W_ERROR(fmt, args...) printf("ERROR: M41ST85W: " fmt, ##args) - -static void m41st85w_clear_bit (u8 reg,u8 mask,const char *name) -{ -u8 data; - -if (i2c_read (M41ST85W_I2C_ADDR , reg,1 , &data,1 )) { -M41ST85W_ERROR ("unable to read %s bit\n" , name); -return ; - } - -if (data & mask) { - data &= ~mask; -if (i2c_write (M41ST85W_I2C_ADDR , reg,1 , &data,1 )) { -M41ST85W_ERROR ("unable to clear %s bit\n" , name); -return ; - } - } -} - -#define M41ST85W_REG_SEC2 0x01 -#define M41ST85W_REG_SEC2_ST 0x80 - -#define M41ST85W_REG_ALHOUR 0x0c -#define M41ST85W_REG_ALHOUR_HT 0x40 - -/* -* The P2020COME board has a STMicro M41ST85W RTC/watchdog -* at i2c bus 1 address 0x68. -*/ -static void start_rtc (void ) -{ -unsigned int bus =i2c_get_bus_num (); - -if (i2c_set_bus_num (M41ST85W_I2C_BUS )) { -M41ST85W_ERROR ("unable to set i2c bus\n" ); - goto out; - } - -/* ensure ST (stop) and HT (halt update) bits are cleared */ -m41st85w_clear_bit (M41ST85W_REG_SEC2 ,M41ST85W_REG_SEC2_ST ,"ST" ); -m41st85w_clear_bit (M41ST85W_REG_ALHOUR ,M41ST85W_REG_ALHOUR_HT ,"HT" ); - -out: -/* reset the i2c bus */ -i2c_set_bus_num (bus); -} - -int board_early_init_r (void ) -{ -start_rtc (); -return 0 ; -} - -#define M41ST85W_REG_WATCHDOG 0x09 -#define M41ST85W_REG_WATCHDOG_WDS 0x80 -#define M41ST85W_REG_WATCHDOG_BMB0 0x04 - -void board_reset (void ) -{ -u8 data =M41ST85W_REG_WATCHDOG_WDS |M41ST85W_REG_WATCHDOG_BMB0 ; - -/* set the hardware watchdog timeout to 1/16 second, then hang */ -i2c_set_bus_num (M41ST85W_I2C_BUS ); -i2c_write (M41ST85W_I2C_ADDR ,M41ST85W_REG_WATCHDOG ,1 , &data,1 ); - -while (1 ) -/* hang */ ; -} - -#ifdef CONFIG_TSEC_ENET -int board_eth_init (bd_t *bis) -{ -struct fsl_pq_mdio_info mdio_info; -struct tsec_info_struct tsec_info[4 ]; -int num =0 ; - -#ifdef CONFIG_TSEC1 -SET_STD_TSEC_INFO (tsec_info[num],1 ); - num++; -#endif -#ifdef CONFIG_TSEC2 -SET_STD_TSEC_INFO (tsec_info[num],2 ); - num++; -#endif -#ifdef CONFIG_TSEC3 -SET_STD_TSEC_INFO (tsec_info[num],3 ); -if (is_serdes_configured (SGMII_TSEC3 )) { -puts ("eTSEC3 is in sgmii mode." ); - tsec_info[num].flags |=TSEC_SGMII ; - } - num++; -#endif -if (!num) { -printf ("No TSECs initialized\n" ); -return 0 ; - } - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR ; - mdio_info.name =DEFAULT_MII_NAME ; -fsl_pq_mdio_init (bis, &mdio_info); - -tsec_eth_init (bis, tsec_info, num); - -return pci_eth_init (bis); -} -#endif - -#if defined(CONFIG_OF_BOARD_SETUP ) -int ft_board_setup (void *blob,bd_t *bd) -{ -phys_addr_t base; -phys_size_t size; - -ft_cpu_setup (blob, bd); - - base =getenv_bootm_low (); - size =getenv_bootm_size (); - -#if defined(CONFIG_PCI ) -ft_pci_board_setup (blob); -#endif - -fdt_fixup_memory (blob, (u64 )base, (u64 )size); - -#ifdef CONFIG_HAS_FSL_DR_USB -fdt_fixup_dr_usb (blob, bd); -#endif - -return 0 ; -} -#endif board/freescale/p2020come/tlb.c deleted +0
-83@@ -1,83 +0,0 @@ -/* -* Copyright 2011 Freescale Semiconductor, Inc. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { -/* TLB 0 - for temp stack in cache */ -SET_TLB_ENTRY (0 ,CONFIG_SYS_INIT_RAM_ADDR , -CONFIG_SYS_INIT_RAM_ADDR_PHYS , -MAS3_SW |MAS3_SR ,0 , -0 ,0 ,BOOKE_PAGESZ_4K ,0 ), -SET_TLB_ENTRY (0 ,CONFIG_SYS_INIT_RAM_ADDR +4 *1024 , -CONFIG_SYS_INIT_RAM_ADDR_PHYS +4 *1024 , -MAS3_SW |MAS3_SR ,0 , -0 ,0 ,BOOKE_PAGESZ_4K ,0 ), -SET_TLB_ENTRY (0 ,CONFIG_SYS_INIT_RAM_ADDR +8 *1024 , -CONFIG_SYS_INIT_RAM_ADDR_PHYS +8 *1024 , -MAS3_SW |MAS3_SR ,0 , -0 ,0 ,BOOKE_PAGESZ_4K ,0 ), -SET_TLB_ENTRY (0 ,CONFIG_SYS_INIT_RAM_ADDR +12 *1024 , -CONFIG_SYS_INIT_RAM_ADDR_PHYS +12 *1024 , -MAS3_SW |MAS3_SR ,0 , -0 ,0 ,BOOKE_PAGESZ_4K ,0 ), - -/* TLB 1 */ -/* *I*** - Covers boot page */ -SET_TLB_ENTRY (1 ,0xfffff000 ,0xfffff000 , -MAS3_SX |MAS3_SW |MAS3_SR ,MAS2_I |MAS2_G , -0 ,0 ,BOOKE_PAGESZ_4K ,1 ), - -/* *I*G* - CCSRBAR */ -SET_TLB_ENTRY (1 ,CONFIG_SYS_CCSRBAR ,CONFIG_SYS_CCSRBAR_PHYS , -MAS3_SW |MAS3_SR ,MAS2_I |MAS2_G , -0 ,1 ,BOOKE_PAGESZ_1M ,1 ), - -#if defined(CONFIG_PCI) -/* *I*G* - PCI3 - PCI2 0x8000,0000 - 0xbfff,ffff, size = 1G */ -SET_TLB_ENTRY (1 ,CONFIG_SYS_PCIE3_MEM_VIRT ,CONFIG_SYS_PCIE3_MEM_PHYS , -MAS3_SW |MAS3_SR ,MAS2_I |MAS2_G , -0 ,2 ,BOOKE_PAGESZ_1G ,1 ), - -/* *I*G* - PCI1 0xC000,0000 - 0xcfff,ffff, size = 256M */ -SET_TLB_ENTRY (1 ,CONFIG_SYS_PCIE1_MEM_VIRT ,CONFIG_SYS_PCIE1_MEM_VIRT , -MAS3_SW |MAS3_SR ,MAS2_I |MAS2_G , -0 ,3 ,BOOKE_PAGESZ_256M ,1 ), - -/* *I*G* - PCI1 0xD000,0000 - 0xDFFF,FFFF, size = 256M */ -SET_TLB_ENTRY (1 ,CONFIG_SYS_PCIE1_MEM_VIRT +0x10000000 , -CONFIG_SYS_PCIE1_MEM_PHYS +0x10000000 , -MAS3_SW |MAS3_SR ,MAS2_I |MAS2_G , -0 ,4 ,BOOKE_PAGESZ_256M ,1 ), - -/* -* *I*G* - PCI I/O -* -* PCI3 => 0xFFC10000 -* PCI2 => 0xFFC2,0000 -* PCI1 => 0xFFC3,0000 -*/ -SET_TLB_ENTRY (1 ,CONFIG_SYS_PCIE3_IO_VIRT ,CONFIG_SYS_PCIE3_IO_PHYS , -MAS3_SW |MAS3_SR ,MAS2_I |MAS2_G , -0 ,5 ,BOOKE_PAGESZ_256K ,1 ), -#endif /* #if defined(CONFIG_PCI) */ - -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) -/* *I*G - DDR3 2G Part 1: 0 - 0x3fff,ffff , size = 1G */ -SET_TLB_ENTRY (1 ,CONFIG_SYS_INIT_L2_ADDR ,CONFIG_SYS_INIT_L2_ADDR_PHYS , -MAS3_SX |MAS3_SW |MAS3_SR ,MAS2_I |MAS2_G , -0 ,6 ,BOOKE_PAGESZ_256K ,1 ), - -/* DDR3 2G Part 2: 0x4000,0000 - 0x7fff,ffff , size = 1G */ -SET_TLB_ENTRY (1 ,CONFIG_SYS_INIT_L2_ADDR +0x40000 , -CONFIG_SYS_INIT_L2_ADDR_PHYS +0x40000 , -MAS3_SX |MAS3_SW |MAS3_SR ,MAS2_I |MAS2_G , -0 ,7 ,BOOKE_PAGESZ_256K ,1 ), -#endif -}; - -int num_tlb_entries =ARRAY_SIZE (tlb_table);configs/P2020COME_SDCARD_defconfig deleted +0
-4@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SDCARD" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020COME=yconfigs/P2020COME_SPIFLASH_defconfig deleted +0
-4@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020COME=ydoc/README.scrapyard +1
-0@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +P2020COME powerpc mpc85xx - - Ira W. Snyder <[email protected]> P2020RDB powerpc mpc85xx - - Poonam Aggrwal <[email protected]> P2010RDB powerpc mpc85xx - - P1020RDB powerpc mpc85xx - -include/configs/P2020COME.h deleted +0
-548@@ -1,547 +0,0 @@ -/* -* Copyright 2009-2010,2012 Freescale Semiconductor, Inc. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* The P2020COME board is only booted via the Freescale On-Chip ROM */ -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC - -#define CONFIG_SYS_TEXT_BASE 0xf8f80000 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc - -#ifdef CONFIG_SDCARD -#define CONFIG_RAMBOOT_SDCARD 1 -#endif - -#ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH 1 -#endif - -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE/* start of monitor */ -#endif - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1/* BOOKE */ -#define CONFIG_E500 1/* BOOKE e500 family */ -#define CONFIG_P2020 1 -#define CONFIG_P2020COME 1 -#define CONFIG_FSL_ELBC 1/* Enable eLBC Support */ -#define CONFIG_MP - -#define CONFIG_PCI 1/* Enable PCI/PCIE */ -#if defined(CONFIG_PCI ) -#define CONFIG_PCIE1 1/* PCIE controller 1 (slot 1) */ -#define CONFIG_PCIE2 1/* PCIE controller 2 (slot 2) */ -#define CONFIG_PCIE3 1/* PCIE controller 3 (slot 3) */ - -#define CONFIG_FSL_PCI_INIT 1/* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1/* indirect PCI bridge support */ -#define CONFIG_FSL_PCIE_RESET 1/* need PCIe reset errata */ -#define CONFIG_SYS_PCI_64BIT 1/* enable 64-bit PCI resources */ -#endif /* #if defined(CONFIG_PCI) */ -#define CONFIG_FSL_LAW 1/* Use common FSL init code */ -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#if defined(CONFIG_PCI ) -#define CONFIG_E1000 1/* E1000 pci Ethernet card */ -#endif - -#ifndef __ASSEMBLY__ -extern unsigned long get_board_ddr_clk (unsigned long dummy); -extern unsigned long get_board_sys_clk (unsigned long dummy); -#endif - -/* -* For P2020COME DDRCLK and SYSCLK are from the same oscillator -* For DA phase the SYSCLK is 66MHz -* For EA phase the SYSCLK is 100MHz -*/ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) - -#define CONFIG_HWCONFIG - -/* -* These can be toggled for performance analysis, otherwise use default. -*/ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch prediction */ - -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ - -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_ADDR_MAP 1 -#define CONFIG_SYS_NUM_ADDR_MAP 16/* number of TLB1 entries */ -#endif - -#define CONFIG_SYS_MEMTEST_START 0x00000000/* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - -/* -* Config the L2 Cache as L2 SRAM -*/ -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull -#else -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#endif -#define CONFIG_SYS_L2_SIZE (512 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR \ - + CONFIG_SYS_L2_SIZE) - -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* DDR Setup */ -#define CONFIG_SYS_FSL_DDR3 -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#define CONFIG_DDR_SPD - -#define CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef - -#define CONFIG_SYS_SDRAM_SIZE 2048ULL/* DDR size on P2020COME */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d -#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 -#define CONFIG_SYS_DDR_SBE 0x00ff0000 - -#define CONFIG_SYS_SPD_BUS_NUM 1 -#define SPD_EEPROM_ADDRESS 0x53 - -/* -* Memory map -* -* 0x0000_0000 0x7fff_ffff DDR3 2G Cacheable -* 0x8000_0000 0x9fff_ffff PCI Express 3 Mem 1G non-cacheable -* 0xa000_0000 0xbfff_ffff PCI Express 2 Mem 1G non-cacheable -* 0xc000_0000 0xdfff_ffff PCI Express 1 Mem 1G non-cacheable -* 0xffc1_0000 0xffc1_ffff PCI Express 3 IO 64K non-cacheable -* 0xffc2_0000 0xffc2_ffff PCI Express 2 IO 64K non-cacheable -* 0xffc3_0000 0xffc3_ffff PCI Express 1 IO 64K non-cacheable -* -* 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 -* 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable -*/ - -/* -* Local Bus Definitions -*/ - -/* There is no NOR Flash on P2020COME */ -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ -#define CONFIG_HWCONFIG - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000/* stack in RAM */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR -/* the assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) - -/* Serial Port - controlled on board with jumper J8 -* open - index 2 -* shorted - index 1 -*/ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* -* Pass open firmware flat tree -*/ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* new uImage format support */ -#define CONFIG_FIT 1 -#define CONFIG_FIT_VERBOSE 1 - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } - -/* -* I2C2 EEPROM -*/ -#define CONFIG_ID_EEPROM -#ifdef CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#endif -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR2 0x18 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10/* and takes up to 10 msec */ - -/* -* eSPI - Enhanced SPI -*/ -#define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 - -/* -* General PCI -* Memory space is mapped 1-1, but I/O space must start from 0. -*/ -#if defined(CONFIG_PCI ) - -/* controller 3, Slot 3, tgtid 3, Base address 8000 */ -#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000/* 512M */ -#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc10000 -#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc10000 -#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000/* 64k */ - -/* controller 2, Slot 2, tgtid 2, Base address 9000 */ -#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000/* 512M */ -#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc20000 -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc20000 -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000/* 64k */ - -/* controller 1, Slot 1, tgtid 1, Base address a000 */ -#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000/* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc30000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc30000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000/* 64k */ - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP -#undef CONFIG_RTL8139 - -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR (x) (x) -#define _IO_BASE 0x00000000 -#endif - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_DOS_PARTITION - -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET ) -#define CONFIG_MII 1/* MII PHY management */ -#define CONFIG_MII_DEFAULT_TSEC 1/* Allow unregistered phys */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 2 -#define TSEC3_PHY_ADDR 1 - -#undef CONFIG_VSC7385_ENET - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_PHY_GIGE 1/* Include GbE speed/duplex detection */ - -#endif /* CONFIG_TSEC_ENET */ - -/* -* Environment -*/ -#if defined(CONFIG_RAMBOOT_SDCARD ) -#define CONFIG_ENV_IS_IN_MMC 1 -#define CONFIG_FSL_FIXED_MMC_LOCATION -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MMC_ENV_DEV 0 -#elif defined(CONFIG_RAMBOOT_SPIFLASH ) -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 -#define CONFIG_ENV_OFFSET 0x100000/* 1MB */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_LOADS_ECHO 1 -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 - -/* -* Command line configuration. -*/ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI ) -#define CONFIG_CMD_NET -#define CONFIG_CMD_PCI -#endif - -#undef CONFIG_WATCHDOG/* watchdog disabled */ - -#define CONFIG_MMC 1 - -#ifdef CONFIG_MMC -#define CONFIG_BOARD_EARLY_INIT_F 1/* Call board_pre_init */ -#define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_FSL_ESDHC -#define CONFIG_GENERIC_MMC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT -#endif /* CONFIG_MMC */ - -#define CONFIG_HAS_FSL_DR_USB -#ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL -#define CONFIG_USB_STORAGE -#endif -#endif - -#if defined(CONFIG_MMC ) || defined(CONFIG_USB_EHCI ) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* Misc Extra Settings */ -#define CONFIG_CMD_DHCP 1 - -#define CONFIG_CMD_DATE 1 -#define CONFIG_RTC_M41T62 1 -#define CONFIG_SYS_RTC_BUS_NUM 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* -* Miscellaneous configurable options -*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ - -/* -* For booting Linux, the board info and command line data -* have to be in the first 64 MB of memory, since this is -* the maximum mapped by the Linux kernel during initialization. -*/ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) -#define CONFIG_SYS_BOOTM_LEN (64 << 20) - -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ -#endif - -/* -* Environment Configuration -*/ - -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET ) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#endif - -#define CONFIG_HOSTNAME unknown -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BOOTDELAY 10/* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS/* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ecc=on\0" \ - "bootcmd=run sdboot\0" \ - "sdboot=setenv bootargs root=/dev/mmcblk0p2 rw " \ - "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\ - "$othbootargs; mmcinfo; " \ - "ext2load mmc 0:2 $loadaddr /boot/$bootfile; " \ - "ext2load mmc 0:2 $fdtaddr /boot/$fdtfile; " \ - "bootm $loadaddr - $fdtaddr\0" \ - "sdfatboot=setenv bootargs root=/dev/ram rw " \ - "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\ - "$othbootargs; mmcinfo; " \ - "fatload mmc 0:1 $loadaddr $bootfile; " \ - "fatload mmc 0:1 $fdtaddr $fdtfile; " \ - "fatload mmc 0:1 $ramdiskaddr $ramdiskfile; " \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "usbboot=setenv bootargs root=/dev/sda1 rw " \ - "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\ - "$othbootargs; " \ - "usb start; " \ - "ext2load usb 0:1 $loadaddr /boot/$bootfile; " \ - "ext2load usb 0:1 $fdtaddr /boot/$fdtfile; " \ - "bootm $loadaddr - $fdtaddr\0" \ - "usbfatboot=setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "usb start; " \ - "fatload usb 0:2 $loadaddr $bootfile; " \ - "fatload usb 0:2 $fdtaddr $fdtfile; " \ - "fatload usb 0:2 $ramdiskaddr $ramdiskfile; " \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "usbext2boot=setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "usb start; " \ - "ext2load usb 0:4 $loadaddr $bootfile; " \ - "ext2load usb 0:4 $fdtaddr $fdtfile; " \ - "ext2load usb 0:4 $ramdiskaddr $ramdiskfile; " \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "upgradespi=sf probe 0; " \ - "setenv startaddr 0; " \ - "setenv erasesize a0000; " \ - "tftp 1000000 $tftppath/$uboot_spi; " \ - "sf erase $startaddr $erasesize; " \ - "sf write 1000000 $startaddr $filesize; " \ - "sf erase 100000 120000\0" \ - "clearspienv=sf probe 0;sf erase 100000 20000\0" \ - "othbootargs=ramdisk_size=700000 cache-sram-size=0x10000\0" \ - "netdev=eth0\0" \ - "rootdelaysecond=15\0" \ - "uboot_nor=u-boot-nor.bin\0" \ - "uboot_spi=u-boot-p2020.spi\0" \ - "uboot_sd=u-boot-p2020.bin\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=rootfs-dev.ext2.img\0" \ - "fdtaddr=c00000\0" \ - "fdtfile=uImage-2.6.32-p2020.dtb\0" \ - "tftppath=p2020\0" - -#define CONFIG_HDBOOT \ - "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "usb start;" \ - "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ - "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $tftppath/$bootfile;" \ - "tftp $fdtaddr $tftppath/$fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $tftppath/$ramdiskfile;" \ - "tftp $loadaddr $tftppath/$bootfile;" \ - "tftp $fdtaddr $tftppath/$fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT - -#endif /* __CONFIG_H */ --1.9.1
PATCH 3/8 powerpc: mpc85xx: remove P2020COME board support
In reply to Masahiro YamadaQuoted 4 lines · Masahiro Yamada
This board is still a non-generic board.
Signed-off-by Masahiro Yamada <[email protected]>Cc Ira W. Snyder <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150123/929c54e8/attachment.pgp>
PATCH 4/8 powerpc: mpc85xx: remove P2020DS board support
In reply to Masahiro YamadaThis board is still a non-generic board.
Signed-off-by Masahiro Yamada <[email protected]>
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/p2020ds/Kconfig | 12 - board/freescale/p2020ds/MAINTAINERS | 10 - board/freescale/p2020ds/Makefile | 12 - board/freescale/p2020ds/ddr.c | 129 ------- board/freescale/p2020ds/law.c | 20 - board/freescale/p2020ds/p2020ds.c | 263 ------------- board/freescale/p2020ds/tlb.c | 90 ----- configs/P2020DS_36BIT_defconfig | 4 - configs/P2020DS_DDR2_defconfig | 4 - configs/P2020DS_SDCARD_defconfig | 4 - configs/P2020DS_SPIFLASH_defconfig | 4 - configs/P2020DS_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/P2020DS.h | 751 ------------------------------------ 15 files changed, 1 insertion(+), 1310 deletions(-) delete mode 100644 board/freescale/p2020ds/Kconfig delete mode 100644 board/freescale/p2020ds/MAINTAINERS delete mode 100644 board/freescale/p2020ds/Makefile delete mode 100644 board/freescale/p2020ds/ddr.c delete mode 100644 board/freescale/p2020ds/law.c delete mode 100644 board/freescale/p2020ds/p2020ds.c delete mode 100644 board/freescale/p2020ds/tlb.c delete mode 100644 configs/P2020DS_36BIT_defconfig delete mode 100644 configs/P2020DS_DDR2_defconfig delete mode 100644 configs/P2020DS_SDCARD_defconfig delete mode 100644 configs/P2020DS_SPIFLASH_defconfig delete mode 100644 configs/P2020DS_defconfig delete mode 100644 include/configs/P2020DS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
@@ -93,9 +93,6 @@ config TARGET_P1_P2_RDB_PC config TARGET_P1_TWR bool "Support p1_twr" -config TARGET_P2020DS - bool "Support P2020DS" - config TARGET_P2041RDB bool "Support P2041RDB"
@@ -178,7 +175,6 @@ source "board/freescale/p1022ds/Kconfig" source "board/freescale/p1023rdb/Kconfig" source "board/freescale/p1_p2_rdb_pc/Kconfig" source "board/freescale/p1_twr/Kconfig" -source "board/freescale/p2020ds/Kconfig" source "board/freescale/p2041rdb/Kconfig" source "board/freescale/qemu-ppce500/Kconfig" source "board/freescale/t102xqds/Kconfig"
board/freescale/p2020ds/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_P2020DS - -config SYS_BOARD - default "p2020ds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "P2020DS" - -endif
board/freescale/p2020ds/MAINTAINERS deleted +0 -10
@@ -1,10 +0,0 @@ -P2020DS BOARD -#M: - -S: Maintained -F: board/freescale/p2020ds/ -F: include/configs/P2020DS.h -F: configs/P2020DS_defconfig -F: configs/P2020DS_36BIT_defconfig -F: configs/P2020DS_DDR2_defconfig -F: configs/P2020DS_SDCARD_defconfig -F: configs/P2020DS_SPIFLASH_defconfig
board/freescale/p2020ds/Makefile deleted +0 -12
@@ -1,12 +0,0 @@ -# -# Copyright 2007-2009 Freescale Semiconductor, Inc. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += p2020ds.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o
board/freescale/p2020ds/ddr.c deleted +0 -129
129 lines not on this page · raw message
board/freescale/p2020ds/law.c deleted +0 -20
@@ -1,20 +0,0 @@ -/* -* Copyright 2008-2010 Freescale Semiconductor, Inc. -* -* (C) Copyright 2000 -* Wolfgang Denk, DENX Software Engineering, wd at denx.de. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -struct law_entry law_table[] = { -SET_LAW (CONFIG_SYS_FLASH_BASE_PHYS ,LAW_SIZE_256M ,LAW_TRGT_IF_LBC ), -SET_LAW (PIXIS_BASE_PHYS ,LAW_SIZE_4K ,LAW_TRGT_IF_LBC ), -SET_LAW (CONFIG_SYS_NAND_BASE_PHYS ,LAW_SIZE_1M ,LAW_TRGT_IF_LBC ), -}; - -int num_law_entries =ARRAY_SIZE (law_table);
board/freescale/p2020ds/p2020ds.c deleted +0 -263
263 lines not on this page · raw message
board/freescale/p2020ds/tlb.c deleted +0 -90
90 lines not on this page · raw message
configs/P2020DS_36BIT_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="36BIT" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020DS=y
configs/P2020DS_DDR2_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="DDR2" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020DS=y
configs/P2020DS_SDCARD_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SDCARD" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020DS=y
configs/P2020DS_SPIFLASH_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020DS=y
configs/P2020DS_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020DS=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +P2020DS powerpc mpc85xx - - P2020COME powerpc mpc85xx - - Ira W. Snyder <[email protected]> P2020RDB powerpc mpc85xx - - Poonam Aggrwal <[email protected]> P2010RDB powerpc mpc85xx - -
include/configs/P2020DS.h deleted +0 -751
751 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH 4/8 powerpc: mpc85xx: remove P2020DS board support
Quoted 3 lines · Masahiro Yamada
This board is still a non-generic board.
Signed-off-by Masahiro Yamada <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150123/85b05344/attachment.pgp>
PATCH 5/8 powerpc: ppc4xx: remove PPChameleonEVB, CATcenter boards
In reply to Masahiro YamadaThese boards are still non-generic boards.
It is a good thing that we can drop board-specific hack code from drivers/mtd/nand/nand_base.c
Signed-off-by Masahiro Yamada <[email protected]>
Cc Andrea "llandre" Marson <[email protected]>
---
arch/powerpc/cpu/ppc4xx/Kconfig | 7 - board/dave/PPChameleonEVB/Kconfig | 25 - board/dave/PPChameleonEVB/MAINTAINERS | 20 - board/dave/PPChameleonEVB/Makefile | 8 - board/dave/PPChameleonEVB/PPChameleonEVB.c | 231 --------- board/dave/PPChameleonEVB/flash.c | 99 ---- board/dave/PPChameleonEVB/nand.c | 99 ---- board/dave/PPChameleonEVB/u-boot.lds | 115 ----- configs/CATcenter_25_defconfig | 4 - configs/CATcenter_33_defconfig | 4 - configs/CATcenter_defconfig | 4 - configs/PPChameleonEVB_BA_25_defconfig | 4 - configs/PPChameleonEVB_BA_33_defconfig | 4 - configs/PPChameleonEVB_HI_25_defconfig | 4 - configs/PPChameleonEVB_HI_33_defconfig | 4 - configs/PPChameleonEVB_ME_25_defconfig | 4 - configs/PPChameleonEVB_ME_33_defconfig | 4 - configs/PPChameleonEVB_defconfig | 3 - doc/README.scrapyard | 2 + drivers/mtd/nand/nand_base.c | 5 - include/configs/CATcenter.h | 750 ---------------------------- include/configs/PPChameleonEVB.h | 777 ----------------------------- 22 files changed, 2 insertions(+), 2175 deletions(-) delete mode 100644 board/dave/PPChameleonEVB/Kconfig delete mode 100644 board/dave/PPChameleonEVB/MAINTAINERS delete mode 100644 board/dave/PPChameleonEVB/Makefile delete mode 100644 board/dave/PPChameleonEVB/PPChameleonEVB.c delete mode 100644 board/dave/PPChameleonEVB/flash.c delete mode 100644 board/dave/PPChameleonEVB/nand.c delete mode 100644 board/dave/PPChameleonEVB/u-boot.lds delete mode 100644 configs/CATcenter_25_defconfig delete mode 100644 configs/CATcenter_33_defconfig delete mode 100644 configs/CATcenter_defconfig delete mode 100644 configs/PPChameleonEVB_BA_25_defconfig delete mode 100644 configs/PPChameleonEVB_BA_33_defconfig delete mode 100644 configs/PPChameleonEVB_HI_25_defconfig delete mode 100644 configs/PPChameleonEVB_HI_33_defconfig delete mode 100644 configs/PPChameleonEVB_ME_25_defconfig delete mode 100644 configs/PPChameleonEVB_ME_33_defconfig delete mode 100644 configs/PPChameleonEVB_defconfig delete mode 100644 include/configs/CATcenter.h delete mode 100644 include/configs/PPChameleonEVB.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -7
@@ -101,12 +101,6 @@ config TARGET_FX12MM config TARGET_V5FX30TEVAL bool "Support v5fx30teval" -config TARGET_CATCENTER - bool "Support CATcenter" - -config TARGET_PPCHAMELEONEVB - bool "Support PPChameleonEVB" - config TARGET_CPCI2DP bool "Support CPCI2DP"
@@ -199,7 +193,6 @@ source "board/avnet/fx12mm/Kconfig" source "board/avnet/v5fx30teval/Kconfig" source "board/csb272/Kconfig" source "board/csb472/Kconfig" -source "board/dave/PPChameleonEVB/Kconfig" source "board/esd/cpci2dp/Kconfig" source "board/esd/cpci405/Kconfig" source "board/esd/plu405/Kconfig"
board/dave/PPChameleonEVB/Kconfig deleted +0 -25
@@ -1,25 +0,0 @@ -if TARGET_CATCENTER - -config SYS_BOARD - default "PPChameleonEVB" - -config SYS_VENDOR - default "dave" - -config SYS_CONFIG_NAME - default "CATcenter" - -endif - -if TARGET_PPCHAMELEONEVB - -config SYS_BOARD - default "PPChameleonEVB" - -config SYS_VENDOR - default "dave" - -config SYS_CONFIG_NAME - default "PPChameleonEVB" - -endif
board/dave/PPChameleonEVB/MAINTAINERS deleted +0 -20
@@ -1,20 +0,0 @@ -PPCHAMELEONEVB BOARD -#M: - -S: Maintained -F: board/dave/PPChameleonEVB/ -F: include/configs/CATcenter.h -F: configs/CATcenter_defconfig -F: configs/CATcenter_25_defconfig -F: configs/CATcenter_33_defconfig - -PPCHAMELEONEVB BOARD -M: Andrea "llandre" Marson <[email protected]> -S: Maintained -F: include/configs/PPChameleonEVB.h -F: configs/PPChameleonEVB_defconfig -F: configs/PPChameleonEVB_BA_25_defconfig -F: configs/PPChameleonEVB_BA_33_defconfig -F: configs/PPChameleonEVB_HI_25_defconfig -F: configs/PPChameleonEVB_HI_33_defconfig -F: configs/PPChameleonEVB_ME_25_defconfig -F: configs/PPChameleonEVB_ME_33_defconfig
board/dave/PPChameleonEVB/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = PPChameleonEVB.o flash.o nand.o
board/dave/PPChameleonEVB/PPChameleonEVB.c deleted +0 -231
231 lines not on this page · raw message
board/dave/PPChameleonEVB/flash.c deleted +0 -99
99 lines not on this page · raw message
board/dave/PPChameleonEVB/nand.c deleted +0 -99
99 lines not on this page · raw message
board/dave/PPChameleonEVB/u-boot.lds deleted +0 -115
115 lines not on this page · raw message
configs/CATcenter_25_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_25" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_CATCENTER=y
configs/CATcenter_33_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_33" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_CATCENTER=y
configs/CATcenter_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="PPCHAMELEON_MODULE_MODEL=1" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_CATCENTER=y
configs/PPChameleonEVB_BA_25_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="PPCHAMELEON_MODULE_MODEL=0,PPCHAMELEON_CLK_25" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_PPCHAMELEONEVB=y
configs/PPChameleonEVB_BA_33_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="PPCHAMELEON_MODULE_MODEL=0,PPCHAMELEON_CLK_33" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_PPCHAMELEONEVB=y
configs/PPChameleonEVB_HI_25_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="PPCHAMELEON_MODULE_MODEL=2,PPCHAMELEON_CLK_25" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_PPCHAMELEONEVB=y
configs/PPChameleonEVB_HI_33_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="PPCHAMELEON_MODULE_MODEL=2,PPCHAMELEON_CLK_33" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_PPCHAMELEONEVB=y
configs/PPChameleonEVB_ME_25_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_25" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_PPCHAMELEONEVB=y
configs/PPChameleonEVB_ME_33_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_33" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_PPCHAMELEONEVB=y
configs/PPChameleonEVB_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_PPCHAMELEONEVB=y
doc/README.scrapyard +2 -0
@@ -12,6 +12,8 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +CATcenter powerpc ppc4xx - - +PPChameleonEVB powerpc ppc4xx - - Andrea "llandre" Marson <[email protected]> P2020DS powerpc mpc85xx - - P2020COME powerpc mpc85xx - - Ira W. Snyder <[email protected]> P2020RDB powerpc mpc85xx - - Poonam Aggrwal <[email protected]>
drivers/mtd/nand/nand_base.c +0 -5
@@ -1065,11 +1065,6 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) } }#endif -#ifdef PPCHAMELON_NAND_TIMER_HACK - time_start =get_timer (0 ); -while (get_timer (time_start) <10 ) - ; -#endif /* PPCHAMELON_NAND_TIMER_HACK */ led_trigger_event (nand_led_trigger,LED_OFF ); status = (int )chip->read_byte (mtd);
include/configs/CATcenter.h deleted +0 -750
750 lines not on this page · raw message
include/configs/PPChameleonEVB.h deleted +0 -777
777 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH 5/8 powerpc: ppc4xx: remove PPChameleonEVB, CATcenter boards
Quoted 7 lines · Masahiro Yamada
These boards are still non-generic boards.
It is a good thing that we can drop board-specific hack code from
drivers/mtd/nand/nand_base.cSigned-off-by Masahiro Yamada <[email protected]>Cc Andrea "llandre" Marson <[email protected]>
If nobody speaks up to maintain those 4xx board I'm fine to remove them. So:
Acked-by Stefan Roese <[email protected]>
Thanks,
Stefan
PATCH 5/8 powerpc: ppc4xx: remove PPChameleonEVB, CATcenter boards
In reply to Masahiro YamadaQuoted 7 lines · Masahiro Yamada
These boards are still non-generic boards.
It is a good thing that we can drop board-specific hack code from
drivers/mtd/nand/nand_base.cSigned-off-by Masahiro Yamada <[email protected]>Cc Andrea "llandre" Marson <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150123/49e535ac/attachment.pgp>
PATCH 6/8 powerpc: mpc5xxx: remove Total5200 board support
In reply to Masahiro YamadaThis board is still a non-generic board.
Signed-off-by Masahiro Yamada <[email protected]>
---
arch/powerpc/cpu/mpc5xxx/Kconfig | 4 - board/total5200/Kconfig | 9 - board/total5200/MAINTAINERS | 9 - board/total5200/Makefile | 8 - board/total5200/mt48lc16m16a2-75.h | 14 -- board/total5200/mt48lc32m16a2-75.h | 19 -- board/total5200/sdram.c | 159 ------------- board/total5200/sdram.h | 18 -- board/total5200/total5200.c | 276 ---------------------- configs/Total5200_Rev2_defconfig | 4 - configs/Total5200_Rev2_lowboot_defconfig | 4 - configs/Total5200_defconfig | 4 - configs/Total5200_lowboot_defconfig | 4 - doc/README.scrapyard | 1 + drivers/net/mpc5xxx_fec.c | 5 - drivers/video/cfb_console.c | 3 - drivers/video/sed13806.c | 5 - include/configs/Total5200.h | 386 ------------------------------- 18 files changed, 1 insertion(+), 931 deletions(-) delete mode 100644 board/total5200/Kconfig delete mode 100644 board/total5200/MAINTAINERS delete mode 100644 board/total5200/Makefile delete mode 100644 board/total5200/mt48lc16m16a2-75.h delete mode 100644 board/total5200/mt48lc32m16a2-75.h delete mode 100644 board/total5200/sdram.c delete mode 100644 board/total5200/sdram.h delete mode 100644 board/total5200/total5200.c delete mode 100644 configs/Total5200_Rev2_defconfig delete mode 100644 configs/Total5200_Rev2_lowboot_defconfig delete mode 100644 configs/Total5200_defconfig delete mode 100644 configs/Total5200_lowboot_defconfig delete mode 100644 include/configs/Total5200.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
@@ -47,9 +47,6 @@ config TARGET_MUNICES config TARGET_PM520 bool "Support PM520" -config TARGET_TOTAL5200 - bool "Support Total5200" - config TARGET_V38B bool "Support v38b"
@@ -119,7 +116,6 @@ source "board/motionpro/Kconfig" source "board/munices/Kconfig" source "board/phytec/pcm030/Kconfig" source "board/pm520/Kconfig" -source "board/total5200/Kconfig" source "board/tqc/tqm5200/Kconfig" source "board/v38b/Kconfig"
board/total5200/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_TOTAL5200 - -config SYS_BOARD - default "total5200" - -config SYS_CONFIG_NAME - default "Total5200" - -endif
board/total5200/MAINTAINERS deleted +0 -9
@@ -1,9 +0,0 @@ -TOTAL5200 BOARD -#M: - -S: Maintained -F: board/total5200/ -F: include/configs/Total5200.h -F: configs/Total5200_defconfig -F: configs/Total5200_lowboot_defconfig -F: configs/Total5200_Rev2_defconfig -F: configs/Total5200_Rev2_lowboot_defconfig
board/total5200/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := total5200.o sdram.o
board/total5200/mt48lc16m16a2-75.h deleted +0 -14
@@ -1,14 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at freescale.com. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 0/* is SDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xD2322800 -#define SDRAM_CONFIG2 0x8AD70000
board/total5200/mt48lc32m16a2-75.h deleted +0 -19
@@ -1,19 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at freescale.com. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -/* -* Micron MT48LC32M16A2-75 is compatible to: -* - Infineon HYB39S512160AT-75 -*/ - -#define SDRAM_DDR 0/* is SDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x514F0000 -#define SDRAM_CONFIG1 0xD2322800 -#define SDRAM_CONFIG2 0x8AD70000
board/total5200/sdram.c deleted +0 -159
159 lines not on this page · raw message
board/total5200/sdram.h deleted +0 -18
@@ -1,18 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at freescale.com. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -typedef struct { -ulong ddr; -ulong mode; -ulong emode; -ulong control; -ulong config1; -ulong config2; -ulong tapdelay; -}sdram_conf_t ; - -long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf);
board/total5200/total5200.c deleted +0 -276
276 lines not on this page · raw message
configs/Total5200_Rev2_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="TOTAL5200_REV=2" -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TOTAL5200=y
configs/Total5200_Rev2_lowboot_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="TOTAL5200_REV=2,SYS_TEXT_BASE=0xFE000000" -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TOTAL5200=y
configs/Total5200_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="TOTAL5200_REV=1" -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TOTAL5200=y
configs/Total5200_lowboot_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="TOTAL5200_REV=1,SYS_TEXT_BASE=0xFE000000" -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TOTAL5200=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +Total5200 powerpc mpc5xxx - - CATcenter powerpc ppc4xx - - PPChameleonEVB powerpc ppc4xx - - Andrea "llandre" Marson <[email protected]> P2020DS powerpc mpc85xx - -
drivers/net/mpc5xxx_fec.c +0 -5
@@ -407,13 +407,8 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)*/ if (fec->xcv_type ==SEVENWIRE ) {/* 10MBit with 7-wire operation */ -#if defined(CONFIG_TOTAL5200 ) -/* 7-wire and USB2 on Ethernet */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |=0x00030000 ; -#else /* !CONFIG_TOTAL5200 */ /* 7-wire only */ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |=0x00020000 ; -#endif /* CONFIG_TOTAL5200 */ }else {/* 100MBit with MD operation */ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |=0x00050000 ;
drivers/video/cfb_console.c +0 -3
@@ -117,10 +117,7 @@* Defines for the SED13806 driver */ #ifdef CONFIG_VIDEO_SED13806 - -#ifndef CONFIG_TOTAL5200 #define VIDEO_FB_LITTLE_ENDIAN -#endif #define VIDEO_HW_RECTFILL #define VIDEO_HW_BITBLT #endif
drivers/video/sed13806.c +0 -5
@@ -18,13 +18,8 @@#define writeByte (ptrReg,value) \ *(volatile unsigned char *)(sed13806.isaBase + ptrReg) = value -#ifdef CONFIG_TOTAL5200 -#define writeWord (ptrReg,value) \ - (*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = value) -#else #define writeWord (ptrReg,value) \ (*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = ((value >> 8 ) & 0xff) | ((value << 8) & 0xff00)) -#endif GraphicDevice sed13806;
include/configs/Total5200.h deleted +0 -386
386 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH 6/8 powerpc: mpc5xxx: remove Total5200 board support
Quoted 3 lines · Masahiro Yamada
This board is still a non-generic board.
Signed-off-by Masahiro Yamada <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150123/1b30f295/attachment.pgp>
PATCH 7/8 powerpc: mpc5xxx: PM520 board support
In reply to Masahiro YamadaThis board is still a non-generic board.
Signed-off-by Masahiro Yamada <[email protected]>
Cc Josef Wagner <[email protected]>
---
arch/powerpc/cpu/mpc5xxx/Kconfig | 4 - board/pm520/Kconfig | 9 - board/pm520/MAINTAINERS | 9 - board/pm520/Makefile | 8 - board/pm520/flash.c | 659 ------------------------------------ board/pm520/mt46v16m16-75.h | 16 - board/pm520/mt48lc16m16a2-75.h | 14 - board/pm520/pm520.c | 253 -------------- configs/PM520_DDR_defconfig | 4 - configs/PM520_ROMBOOT_DDR_defconfig | 4 - configs/PM520_ROMBOOT_defconfig | 4 - configs/PM520_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/PM520.h | 342 ------------------- 14 files changed, 1 insertion(+), 1329 deletions(-) delete mode 100644 board/pm520/Kconfig delete mode 100644 board/pm520/MAINTAINERS delete mode 100644 board/pm520/Makefile delete mode 100644 board/pm520/flash.c delete mode 100644 board/pm520/mt46v16m16-75.h delete mode 100644 board/pm520/mt48lc16m16a2-75.h delete mode 100644 board/pm520/pm520.c delete mode 100644 configs/PM520_DDR_defconfig delete mode 100644 configs/PM520_ROMBOOT_DDR_defconfig delete mode 100644 configs/PM520_ROMBOOT_defconfig delete mode 100644 configs/PM520_defconfig delete mode 100644 include/configs/PM520.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
@@ -44,9 +44,6 @@ config TARGET_MOTIONPRO config TARGET_MUNICES bool "Support munices" -config TARGET_PM520 - bool "Support PM520" - config TARGET_V38B bool "Support v38b"
@@ -115,7 +112,6 @@ source "board/jupiter/Kconfig" source "board/motionpro/Kconfig" source "board/munices/Kconfig" source "board/phytec/pcm030/Kconfig" -source "board/pm520/Kconfig" source "board/tqc/tqm5200/Kconfig" source "board/v38b/Kconfig"
board/pm520/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_PM520 - -config SYS_BOARD - default "pm520" - -config SYS_CONFIG_NAME - default "PM520" - -endif
board/pm520/MAINTAINERS deleted +0 -9
@@ -1,9 +0,0 @@ -PM520 BOARD -M: Josef Wagner <[email protected]> -S: Maintained -F: board/pm520/ -F: include/configs/PM520.h -F: configs/PM520_defconfig -F: configs/PM520_DDR_defconfig -F: configs/PM520_ROMBOOT_defconfig -F: configs/PM520_ROMBOOT_DDR_defconfig
board/pm520/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := pm520.o flash.o
board/pm520/flash.c deleted +0 -659
659 lines not on this page · raw message
board/pm520/mt46v16m16-75.h deleted +0 -16
@@ -1,16 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 1/* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000
board/pm520/mt48lc16m16a2-75.h deleted +0 -14
@@ -1,14 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 0/* is SDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xD2322800 -#define SDRAM_CONFIG2 0x8AD70000
board/pm520/pm520.c deleted +0 -253
253 lines not on this page · raw message
configs/PM520_DDR_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC5200_DDR" -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_PM520=y
configs/PM520_ROMBOOT_DDR_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC5200_DDR,BOOT_ROM" -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_PM520=y
configs/PM520_ROMBOOT_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="BOOT_ROM" -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_PM520=y
configs/PM520_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_PM520=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +PM520 powerpc mpc5xxx - - Josef Wagner <[email protected]> Total5200 powerpc mpc5xxx - - CATcenter powerpc ppc4xx - - PPChameleonEVB powerpc ppc4xx - - Andrea "llandre" Marson <[email protected]>
include/configs/PM520.h deleted +0 -342
342 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH 7/8 powerpc: mpc5xxx: PM520 board support
Quoted 4 lines · Masahiro Yamada
This board is still a non-generic board.
Signed-off-by Masahiro Yamada <[email protected]>Cc Josef Wagner <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150123/c07f3624/attachment.pgp>
PATCH 8/8 powerpc: remove icecube_5200, Lite5200, cpci5200, mecp5200, pf5200
In reply to Masahiro YamadaThese boards are still non-generic boards.
Signed-off-by Masahiro Yamada <[email protected]>
Cc Wolfgang Denk <[email protected]>
Cc Reinhard Arlt <[email protected]>
---
arch/powerpc/cpu/mpc5xxx/Kconfig | 16 - arch/powerpc/cpu/mpc5xxx/pci_mpc5200.c | 14 - board/esd/cpci5200/Kconfig | 12 - board/esd/cpci5200/MAINTAINERS | 6 - board/esd/cpci5200/Makefile | 14 - board/esd/cpci5200/cpci5200.c | 284 ---------- board/esd/cpci5200/mt46v16m16-75.h | 16 - board/esd/cpci5200/strataflash.c | 786 --------------------------- board/esd/mecp5200/Kconfig | 12 - board/esd/mecp5200/MAINTAINERS | 6 - board/esd/mecp5200/Makefile | 8 - board/esd/mecp5200/mecp5200.c | 251 --------- board/esd/mecp5200/mt46v16m16-75.h | 16 - board/esd/pf5200/Kconfig | 12 - board/esd/pf5200/MAINTAINERS | 6 - board/esd/pf5200/Makefile | 14 - board/esd/pf5200/flash.c | 445 --------------- board/esd/pf5200/mt46v16m16-75.h | 16 - board/esd/pf5200/pf5200.c | 357 ------------ board/icecube/Kconfig | 9 - board/icecube/MAINTAINERS | 21 - board/icecube/Makefile | 8 - board/icecube/README | 13 - board/icecube/README.Lite5200B_low_power | 22 - board/icecube/flash.c | 477 ---------------- board/icecube/icecube.c | 326 ----------- board/icecube/mt46v16m16-75.h | 16 - board/icecube/mt46v32m16.h | 16 - board/icecube/mt48lc16m16a2-75.h | 14 - configs/Lite5200_LOWBOOT08_defconfig | 4 - configs/Lite5200_LOWBOOT_defconfig | 4 - configs/Lite5200_defconfig | 3 - configs/cpci5200_defconfig | 3 - configs/icecube_5200_DDR_LOWBOOT08_defconfig | 4 - configs/icecube_5200_DDR_LOWBOOT_defconfig | 4 - configs/icecube_5200_DDR_defconfig | 4 - configs/icecube_5200_LOWBOOT08_defconfig | 4 - configs/icecube_5200_LOWBOOT_defconfig | 4 - configs/icecube_5200_defconfig | 3 - configs/lite5200b_LOWBOOT_defconfig | 4 - configs/lite5200b_PM_defconfig | 4 - configs/lite5200b_defconfig | 4 - configs/mecp5200_defconfig | 3 - configs/pf5200_defconfig | 3 - doc/README.scrapyard | 5 + include/configs/IceCube.h | 403 -------------- include/configs/cpci5200.h | 390 ------------- include/configs/mecp5200.h | 319 ----------- include/configs/pf5200.h | 372 ------------- 49 files changed, 5 insertions(+), 4752 deletions(-) delete mode 100644 board/esd/cpci5200/Kconfig delete mode 100644 board/esd/cpci5200/MAINTAINERS delete mode 100644 board/esd/cpci5200/Makefile delete mode 100644 board/esd/cpci5200/cpci5200.c delete mode 100644 board/esd/cpci5200/mt46v16m16-75.h delete mode 100644 board/esd/cpci5200/strataflash.c delete mode 100644 board/esd/mecp5200/Kconfig delete mode 100644 board/esd/mecp5200/MAINTAINERS delete mode 100644 board/esd/mecp5200/Makefile delete mode 100644 board/esd/mecp5200/mecp5200.c delete mode 100644 board/esd/mecp5200/mt46v16m16-75.h delete mode 100644 board/esd/pf5200/Kconfig delete mode 100644 board/esd/pf5200/MAINTAINERS delete mode 100644 board/esd/pf5200/Makefile delete mode 100644 board/esd/pf5200/flash.c delete mode 100644 board/esd/pf5200/mt46v16m16-75.h delete mode 100644 board/esd/pf5200/pf5200.c delete mode 100644 board/icecube/Kconfig delete mode 100644 board/icecube/MAINTAINERS delete mode 100644 board/icecube/Makefile delete mode 100644 board/icecube/README delete mode 100644 board/icecube/README.Lite5200B_low_power delete mode 100644 board/icecube/flash.c delete mode 100644 board/icecube/icecube.c delete mode 100644 board/icecube/mt46v16m16-75.h delete mode 100644 board/icecube/mt46v32m16.h delete mode 100644 board/icecube/mt48lc16m16a2-75.h delete mode 100644 configs/Lite5200_LOWBOOT08_defconfig delete mode 100644 configs/Lite5200_LOWBOOT_defconfig delete mode 100644 configs/Lite5200_defconfig delete mode 100644 configs/cpci5200_defconfig delete mode 100644 configs/icecube_5200_DDR_LOWBOOT08_defconfig delete mode 100644 configs/icecube_5200_DDR_LOWBOOT_defconfig delete mode 100644 configs/icecube_5200_DDR_defconfig delete mode 100644 configs/icecube_5200_LOWBOOT08_defconfig delete mode 100644 configs/icecube_5200_LOWBOOT_defconfig delete mode 100644 configs/icecube_5200_defconfig delete mode 100644 configs/lite5200b_LOWBOOT_defconfig delete mode 100644 configs/lite5200b_PM_defconfig delete mode 100644 configs/lite5200b_defconfig delete mode 100644 configs/mecp5200_defconfig delete mode 100644 configs/pf5200_defconfig delete mode 100644 include/configs/IceCube.h delete mode 100644 include/configs/cpci5200.h delete mode 100644 include/configs/mecp5200.h delete mode 100644 include/configs/pf5200.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -16
@@ -26,9 +26,6 @@ config TARGET_CM5200 config TARGET_GALAXY5200 bool "Support galaxy5200" -config TARGET_ICECUBE - bool "Support IceCube" - config TARGET_INKA4X0 bool "Support inka4x0"
@@ -47,15 +44,6 @@ config TARGET_MUNICES config TARGET_V38B bool "Support v38b" -config TARGET_CPCI5200 - bool "Support cpci5200" - -config TARGET_MECP5200 - bool "Support mecp5200" - -config TARGET_PF5200 - bool "Support pf5200" - config TARGET_O2D bool "Support O2D"
@@ -99,11 +87,7 @@ source "board/a4m072/Kconfig" source "board/bc3450/Kconfig" source "board/canmb/Kconfig" source "board/cm5200/Kconfig" -source "board/esd/cpci5200/Kconfig" -source "board/esd/mecp5200/Kconfig" -source "board/esd/pf5200/Kconfig" source "board/galaxy5200/Kconfig" -source "board/icecube/Kconfig" source "board/ifm/o2dnt2/Kconfig" source "board/inka4x0/Kconfig" source "board/intercontrol/digsy_mtc/Kconfig"
arch/powerpc/cpu/mpc5xxx/pci_mpc5200.c +0 -14
@@ -33,21 +33,7 @@ static int mpc5200_read_config_dword(struct pci_controller *hose, *(volatile u32 *)MPC5XXX_PCI_CAR = (1 <<31 ) | dev | offset;eieio ();udelay (10 ); -#if (definedCONFIG_PF5200 || definedCONFIG_CPCI5200 ) -if (dev &0x00ff0000 ) { -u32 val; - val =in_le16 ((volatile u16 *)(CONFIG_PCI_IO_PHYS +2 )); -udelay (10 ); - val = val <<16 ; - val |=in_le16 ((volatile u16 *)(CONFIG_PCI_IO_PHYS +0 )); - *value = val; - }else { - *value =in_le32 ((volatile u32 *)CONFIG_PCI_IO_PHYS ); - } -udelay (10 ); -#else *value =in_le32 ((volatile u32 *)CONFIG_PCI_IO_PHYS ); -#endif eieio (); *(volatile u32 *)MPC5XXX_PCI_CAR =0 ;udelay (10 );
board/esd/cpci5200/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_CPCI5200 - -config SYS_BOARD - default "cpci5200" - -config SYS_VENDOR - default "esd" - -config SYS_CONFIG_NAME - default "cpci5200" - -endif
board/esd/cpci5200/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -CPCI5200 BOARD -M: Reinhard Arlt <[email protected]> -S: Maintained -F: board/esd/cpci5200/ -F: include/configs/cpci5200.h -F: configs/cpci5200_defconfig
board/esd/cpci5200/Makefile deleted +0 -14
@@ -1,14 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# Objects for Xilinx JTAG programming (CPLD) -# CPLD = ../common/xilinx_jtag/lenval.o \ -# ../common/xilinx_jtag/micro.o \ -# ../common/xilinx_jtag/ports.o - -# obj-y = cpci5200.o flash.o $(CPLD) -obj-y = cpci5200.o strataflash.o
board/esd/cpci5200/cpci5200.c deleted +0 -284
284 lines not on this page · raw message
board/esd/cpci5200/mt46v16m16-75.h deleted +0 -16
@@ -1,16 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 1/* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x705f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000
board/esd/cpci5200/strataflash.c deleted +0 -786
786 lines not on this page · raw message
board/esd/mecp5200/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MECP5200 - -config SYS_BOARD - default "mecp5200" - -config SYS_VENDOR - default "esd" - -config SYS_CONFIG_NAME - default "mecp5200" - -endif
board/esd/mecp5200/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MECP5200 BOARD -M: Reinhard Arlt <[email protected]> -S: Maintained -F: board/esd/mecp5200/ -F: include/configs/mecp5200.h -F: configs/mecp5200_defconfig
board/esd/mecp5200/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = mecp5200.o
board/esd/mecp5200/mecp5200.c deleted +0 -251
251 lines not on this page · raw message
board/esd/mecp5200/mt46v16m16-75.h deleted +0 -16
@@ -1,16 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 1/* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x705f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000
board/esd/pf5200/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_PF5200 - -config SYS_BOARD - default "pf5200" - -config SYS_VENDOR - default "esd" - -config SYS_CONFIG_NAME - default "pf5200" - -endif
board/esd/pf5200/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -PF5200 BOARD -M: Reinhard Arlt <[email protected]> -S: Maintained -F: board/esd/pf5200/ -F: include/configs/pf5200.h -F: configs/pf5200_defconfig
board/esd/pf5200/Makefile deleted +0 -14
@@ -1,14 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# Objects for Xilinx JTAG programming (CPLD) -# CPLD = ../common/xilinx_jtag/lenval.o \ -# ../common/xilinx_jtag/micro.o \ -# ../common/xilinx_jtag/ports.o - -# obj-y = pf5200.o flash.o $(CPLD) -obj-y = pf5200.o flash.o
board/esd/pf5200/flash.c deleted +0 -445
445 lines not on this page · raw message
board/esd/pf5200/mt46v16m16-75.h deleted +0 -16
@@ -1,16 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 1/* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x705f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000
board/esd/pf5200/pf5200.c deleted +0 -357
357 lines not on this page · raw message
board/icecube/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_ICECUBE - -config SYS_BOARD - default "icecube" - -config SYS_CONFIG_NAME - default "IceCube" - -endif
board/icecube/MAINTAINERS deleted +0 -21
@@ -1,21 +0,0 @@ -ICECUBE BOARD -M: Wolfgang Denk <[email protected]> -S: Maintained -F: board/icecube/ -F: include/configs/IceCube.h -F: configs/icecube_5200_defconfig - -ICECUBE_5200_DDR BOARD -#M: - -S: Maintained -F: configs/icecube_5200_DDR_defconfig -F: configs/icecube_5200_DDR_LOWBOOT_defconfig -F: configs/icecube_5200_DDR_LOWBOOT08_defconfig -F: configs/icecube_5200_LOWBOOT_defconfig -F: configs/icecube_5200_LOWBOOT08_defconfig -F: configs/Lite5200_defconfig -F: configs/Lite5200_LOWBOOT_defconfig -F: configs/Lite5200_LOWBOOT08_defconfig -F: configs/lite5200b_defconfig -F: configs/lite5200b_LOWBOOT_defconfig -F: configs/lite5200b_PM_defconfig
board/icecube/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := icecube.o flash.o
board/icecube/README deleted +0 -13
@@ -1,13 +0,0 @@ ---------------------------------------------------------------------------- -Build target Flash address | BDI "go" command | Reset Vector ---------------------------------------------------------------------------- -Lite5200 0xFFF00000 | 0xFFF00100 | 0xFFF00100 -Lite5200_LOWBOOT 0xFF000000 | 0xFF000100 | 0x00000100 -Lite5200_LOWBOOT08 0xFF800000 | 0xFF800100 | 0x00000100 -icecube_5200 0xFFF00000 | 0xFFF00100 | 0xFFF00100 -icecube_5200_LOWBOOT 0xFF000000 | 0xFF000100 | 0x00000100 -icecube_5200_LOWBOOT08 0xFF800000 | 0xFF800100 | 0x00000100 -icecube_5200_DDR 0xFFF00000 | 0xFFF00100 | 0xFFF00100 -icecube_5200_DDR_LOWBOOT 0xFF800000 | 0xFF800100 | 0x00000100 -icecube_5200_DDR_LOWBOOT08 0xFF800000 | 0xFF800100 | 0x00000100 ----------------------------------------------------------------------------
board/icecube/README.Lite5200B_low_power deleted +0 -22
@@ -1,22 +0,0 @@ -Lite5200B wakeup from low-power mode (CONFIG_LITE5200B_PM) ----------------------------------------------------------- - -Low-power mode as described in Lite5200B User's Manual, means that -with support of MC68HLC908QT1 microcontroller (refered to as QT), -everything but the SDRAM can be powered down. This brings -maximum power saving, while one can still restore previous state -quickly. - -Quick overview where U-Boot comes into the picture: -- OS saves device states -- OS saves wakeup handler address to physical 0x0, puts SDRAM into - self-refresh and signals to QT, it should power down the board -- / board is sleeping here / -- someone presses SW4 (connected to QT) -- U-Boot checks PSC2_4 pin, if QT drives it down, then we woke up, - so get SDRAM out of self-refresh and transfer control to OS - wakeup handler -- OS restores device states - -This was tested on Linux with USB and Ethernet in use. Adding -support for other devices is an OS issue.
board/icecube/flash.c deleted +0 -477
477 lines not on this page · raw message
board/icecube/icecube.c deleted +0 -326
133 lines not on this page · raw message
board/icecube/mt48lc16m16a2-75.h deleted +0 -14
Lines of this file are not shown. View the raw message.
configs/Lite5200_LOWBOOT08_defconfig deleted +0 -4
Lines of this file are not shown. View the raw message.
configs/Lite5200_LOWBOOT_defconfig deleted +0 -4
Lines of this file are not shown. View the raw message.
configs/icecube_5200_DDR_LOWBOOT08_defconfig deleted +0 -4
Lines of this file are not shown. View the raw message.
configs/icecube_5200_DDR_LOWBOOT_defconfig deleted +0 -4
Lines of this file are not shown. View the raw message.
configs/icecube_5200_DDR_defconfig deleted +0 -4
Lines of this file are not shown. View the raw message.
configs/icecube_5200_LOWBOOT08_defconfig deleted +0 -4
Lines of this file are not shown. View the raw message.
configs/icecube_5200_LOWBOOT_defconfig deleted +0 -4
Lines of this file are not shown. View the raw message.
configs/lite5200b_LOWBOOT_defconfig deleted +0 -4
Lines of this file are not shown. View the raw message.
include/configs/IceCube.h deleted +0 -403
403 lines not on this page · raw message
include/configs/cpci5200.h deleted +0 -390
390 lines not on this page · raw message
include/configs/mecp5200.h deleted +0 -319
319 lines not on this page · raw message
include/configs/pf5200.h deleted +0 -372
372 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.9.1
Part of the diff is not shown here. View the raw message.
PATCH 8/8 powerpc: remove icecube_5200, Lite5200, cpci5200, mecp5200, pf5200
Quoted 5 lines · Masahiro Yamada
These boards are still non-generic boards.
Signed-off-by Masahiro Yamada <[email protected]>Cc Wolfgang Denk <[email protected]>Cc Reinhard Arlt <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150123/c2d85cef/attachment.pgp>