lib: Kconfig: use bool instead of boolean
PATCH 1/1 lib: Kconfig: use bool instead of boolean
Keyword 'boolean' for type definition attributes is considered deprecated and, therefore, should not be used anymore.
See http://lkml.kernel.org/r/[email protected]
See http://lkml.kernel.org/r/[email protected]
--- lib/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
lib/Kconfig +1 -1
@@ -14,7 +14,7 @@ config BITREVERSE tristate config HAVE_ARCH_BITREVERSE - boolean + bool default n depends on BITREVERSE help
Signature · 1 line
2.1.0
Andrew Morton
maintainerQuoted 11 lines · On Mon, 2 Feb 2015 09:59:16 -0500 Christoph Jaeger <[email protected]> wrote:
Keyword 'boolean' for type definition attributes is considered deprecated and, therefore, should not be used anymore.
See http://lkml.kernel.org/r/[email protected]
See http://lkml.kernel.org/r/[email protected]...
lib/Kconfig config BITREVERSE · line 20
Quoted 8 lines
lib/Kconfig +1
-1@@ -14,7 +14,7 @@ config BITREVERSE tristate config HAVE_ARCH_BITREVERSE - boolean + bool default n depends on BITREVERSE help
Your patch patches 556d2f055bf6d ("ARM: 8187/1: add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction") which appears in linux-next via the ARM tree.
There are many uses of "boolean" in lib/Kconfig. Converting just one of them is inefficient and odd.
556d2f055bf6d is a bit of a surprise. It looks good to me from a non-ARM perspective - the __builtin_constant_p() optimisation is sensible, although bitrev on a constant probably isn't very common.
I'm not sure about the ARM part though! __bitrev8() is pretty damn fast. Presumably an inlined rbit instruction is faster still, but not very much?
The Kconfig help text in 556d2f055bf6d rather needs some caring for.
Quoted 2 lines · Andrew Morton
There are many uses of "boolean" in lib/Kconfig. Converting just one of them is inefficient and odd.
$ git grep -n "^\s*boolean\b" next-20150202 -- "*Kconfig*"
next-20150202:drivers/usb/gadget/Kconfig:427: boolean "USB Webcam function"
next-20150202:lib/Kconfig:17: booleanWhat are Christoph and I missing here?
Paul Bolle
Andrew Morton
maintainerQuoted 9 lines · On Mon, 02 Feb 2015 23:37:54 +0100 Paul Bolle <[email protected]> wrote:
Quoted 2 lines · Andrew Morton
There are many uses of "boolean" in lib/Kconfig. Converting just one of them is inefficient and odd.
$ git grep -n "^\s*boolean\b" next-20150202 -- "*Kconfig*" next-20150202:drivers/usb/gadget/Kconfig:427: boolean "USB Webcam function" next-20150202:lib/Kconfig:17: booleanWhat are Christoph and I missing here?
akpm3:/usr/src/linux-3.19-rc7> grep boolean lib/Kconfig | wc -l 15
Quoted 5 lines · Andrew Morton
Quoted 4 lines · On Mon, 02 Feb 2015 23:37:54 +0100 Paul Bolle <[email protected]> wrote:
Quoted 2 lines · Andrew Morton
There are many uses of "boolean" in lib/Kconfig. Converting just one of them is inefficient and odd.
Quoted 8 lines
Quoted 5 lines
$ git grep -n "^\s*boolean\b" next-20150202 -- "*Kconfig*" next-20150202:drivers/usb/gadget/Kconfig:427: boolean "USB Webcam function" next-20150202:lib/Kconfig:17: booleanWhat are Christoph and I missing here?
akpm3:/usr/src/linux-3.19-rc7> grep boolean lib/Kconfig | wc -l 15
Correct. However, Cristoph put "linux-next" in the subject line of this patch. So this patch was meant to be applied on top of current linux-next.
Paul Bolle
Quoted 6 lines · Andrew Morton
Quoted 4 lines · On Mon, 02 Feb 2015 23:37:54 +0100 Paul Bolle <[email protected]> wrote:
Quoted 2 lines · Andrew Morton
There are many uses of "boolean" in lib/Kconfig. Converting just one of them is inefficient and odd.
Quoted 8 lines
Quoted 5 lines
$ git grep -n "^\s*boolean\b" next-20150202 -- "*Kconfig*" next-20150202:drivers/usb/gadget/Kconfig:427: boolean "USB Webcam function" next-20150202:lib/Kconfig:17: booleanWhat are Christoph and I missing here?
akpm3:/usr/src/linux-3.19-rc7> grep boolean lib/Kconfig | wc -l 15
Those are mostly "corrected" in linux-next or mmotm. Also, Documentation/kbuild/kconfig-language.txt only uses "bool".
Signature · 1 line
~Randy
Hi Andrew,
Quoted 7 lines · On Mon, 2 Feb 2015 14:46:57 -0800 Andrew Morton <[email protected]>…
Quoted 4 lines · On Mon, 02 Feb 2015 23:37:54 +0100 Paul Bolle <[email protected]> wrote:
Quoted 2 lines · Andrew Morton
There are many uses of "boolean" in lib/Kconfig. Converting just one of them is inefficient and odd.
Quoted 8 lines
Quoted 5 lines
$ git grep -n "^\s*boolean\b" next-20150202 -- "*Kconfig*" next-20150202:drivers/usb/gadget/Kconfig:427: boolean "USB Webcam function" next-20150202:lib/Kconfig:17: booleanWhat are Christoph and I missing here?
akpm3:/usr/src/linux-3.19-rc7> grep boolean lib/Kconfig | wc -l 15
All the others are changed by commit 6341e62b212a ("kconfig: use bool instead of boolean for type definition attributes") from the kbuild tree. Been in linux-next since (at least) next-20150108.
Signature · 2 lines
Cheers, Stephen Rothwell [email protected]
Quoted 33 lines · Andrew Morton
Quoted 11 lines · On Mon, 2 Feb 2015 09:59:16 -0500 Christoph Jaeger <[email protected]> wrote:
Keyword 'boolean' for type definition attributes is considered deprecated and, therefore, should not be used anymore.
See http://lkml.kernel.org/r/[email protected]
See http://lkml.kernel.org/r/[email protected]...
lib/Kconfig config BITREVERSE · line 20
Quoted 8 lines
lib/Kconfig +1
-1@@ -14,7 +14,7 @@ config BITREVERSE tristate config HAVE_ARCH_BITREVERSE - boolean + bool default n depends on BITREVERSE helpYour patch patches
556d2f055bf6d("ARM: 8187/1: addCONFIG_HAVE_ARCH_BITREVERSEto support rbit instruction") which appears in linux-next via the ARM tree.There are many uses of "boolean" in lib/Kconfig. Converting just one of them is inefficient and odd.
556d2f055bf6dis a bit of a surprise. It looks good to me from a non-ARM perspective - the__builtin_constant_p()optimisation is sensible, although bitrev on a constant probably isn't very common.
Quoted 5 lines
I'm not sure about the ARM part though!
__bitrev8()is pretty damn fast. Presumably an inlined rbit instruction is faster still, but not very much?The
Kconfighelp text in556d2f055bf6drather needs some caring for.
The patches had already been round six iterations, and had been posted on LKML for every iteration.
When people started pushing to have the patches merged, there were two dependent patches which had been merged via other random trees, so I held them off for a cycle. At that point, I even questioned whether I should be merging them; that question was ignored by everyone.
Eventually, (and after some testing) I ended up giving up and merging them because they're believed to be a net benefit for ARM, and I couldn't locate anyone who'd be useful to ack the generic parts of the patch.
As for whether __bitrev8 is fast or not, that depends whether the table has been speculatively prefetched and is available without having to go out to memory - and it's not just about the table itself, there's also the loading from the individual function's literal pool to get the address of the table too. So that's two memory loads per rbit at minimum.
The rbit instruction is probably at least half the average cycles of two dependent loads.
Signature · 2 lines
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up according to speedtest.net.
Andrew Morton
maintainerQuoted 34 lines · On Mon, 2 Feb 2015 23:05:48 +0000 Russell King - ARM Linux…
Quoted 33 lines · Andrew Morton
Quoted 11 lines · On Mon, 2 Feb 2015 09:59:16 -0500 Christoph Jaeger <[email protected]> wrote:
Keyword 'boolean' for type definition attributes is considered deprecated and, therefore, should not be used anymore.
See http://lkml.kernel.org/r/[email protected]
See http://lkml.kernel.org/r/[email protected]...
lib/Kconfig config BITREVERSE · line 20
Quoted 8 lines
lib/Kconfig +1
-1@@ -14,7 +14,7 @@ config BITREVERSE tristate config HAVE_ARCH_BITREVERSE - boolean + bool default n depends on BITREVERSE helpYour patch patches
556d2f055bf6d("ARM: 8187/1: addCONFIG_HAVE_ARCH_BITREVERSEto support rbit instruction") which appears in linux-next via the ARM tree.There are many uses of "boolean" in lib/Kconfig. Converting just one of them is inefficient and odd.
556d2f055bf6dis a bit of a surprise. It looks good to me from a non-ARM perspective - the__builtin_constant_p()optimisation is sensible, although bitrev on a constant probably isn't very common.
Quoted 8 lines
Quoted 5 lines
I'm not sure about the ARM part though!
__bitrev8()is pretty damn fast. Presumably an inlined rbit instruction is faster still, but not very much?The
Kconfighelp text in556d2f055bf6drather needs some caring for.The patches had already been round six iterations, and had been posted on LKML for every iteration.
People saw "ARM" and went Zzzzz ;)
I'm a bit surprised that nobody helped out with the Kconfig text. I queued the below. Looks OK?
lib/Kconfig renamed from lib/Kconfig~a +2 -3
@@ -18,9 +18,8 @@ config HAVE_ARCH_BITREVERSE default n depends on BITREVERSE help - This option provides an config for the architecture which have instruction - can do bitreverse operation, we use the hardware instruction if the architecture - have this capability. + This option enables the use of hardware bit-reversal instructions on + architectures which support such operations. config RATIONAL bool
_
Quoted 7 lines
When people started pushing to have the patches merged, there were two dependent patches which had been merged via other random trees, so I held them off for a cycle. At that point, I even questioned whether I should be merging them; that question was ignored by everyone.
Eventually, (and after some testing) I ended up giving up and merging them because they're believed to be a net benefit for ARM,
I know the feeling ;)
Quoted 3 lines
and I
couldn't locate anyone who'd be useful to ack the generic parts of the patch.
I usually look after lib/ and hereby ack the patch! I really should do a MAINTAINERS patch but I'm shy.
Quoted 9 lines
As for whether
__bitrev8is fast or not, that depends whether the table has been speculatively prefetched and is available without having to go out to memory - and it's not just about the table itself, there's also the loading from the individual function's literal pool to get the address of the table too. So that's two memory loads per rbit at minimum.The rbit instruction is probably at least half the average cycles of two dependent loads.
OK.
Quoted 6 lines · Andrew Morton
I'm a bit surprised that nobody helped out with the
Kconfigtext. I queued the below. Looks OK?
lib/Kconfig config HAVE_ARCH_BITREVERSE · line 22
Quoted 8 lines
lib/Kconfig renamed from lib/Kconfig~a +2
-3@@ -18,9 +18,8 @@ config HAVE_ARCH_BITREVERSE default n depends on BITREVERSE help - This option provides an config for the architecture which have instruction - can do bitreverse operation, we use the hardware instruction if the architecture - have this capability. + This option enables the use of hardware bit-reversal instructions on + architectures which support such operations.
Looks fine to me. How are we going to handle this change (and the bool bit as well?) Is it something you want me to merge, or will you send these changes towards the end of the merge window?
Signature · 2 lines
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up according to speedtest.net.
Andrew Morton
maintainerQuoted 4 lines · On Mon, 2 Feb 2015 23:30:00 +0000 Russell King - ARM Linux…
Quoted 3 lines · Andrew Morton
I'm a bit surprised that nobody helped out with the
Kconfigtext. I queued the below. Looks OK?
Quoted 15 lines
lib/Kconfig config HAVE_ARCH_BITREVERSE · line 22
Quoted 11 lines
lib/Kconfig renamed from lib/Kconfig~a +2
-3@@ -18,9 +18,8 @@ config HAVE_ARCH_BITREVERSE default n depends on BITREVERSE help - This option provides an config for the architecture which have instruction - can do bitreverse operation, we use the hardware instruction if the architecture - have this capability. + This option enables the use of hardware bit-reversal instructions on + architectures which support such operations.Looks fine to me. How are we going to handle this change (and the bool bit as well?) Is it something you want me to merge, or will you send these changes towards the end of the merge window?
Yep, I can take care of them.
Quoted 15 lines · Andrew Morton
Quoted 13 lines · On Mon, 2 Feb 2015 09:59:16 -0500 Christoph Jaeger <[email protected]> wrote:
Keyword 'boolean' for type definition attributes is considered deprecated and, therefore, should not be used anymore.
See http://lkml.kernel.org/r/[email protected]
See http://lkml.kernel.org/r/[email protected]...
lib/Kconfig +0
-0@@ -14,7 +14,7 @@ config BITREVERSE tristate
Quoted 10 lines
lib/Kconfig config BITREVERSE · line 20
Quoted 6 lines
lib/Kconfig +1
-1config HAVE_ARCH_BITREVERSE - boolean + bool default n depends on BITREVERSE helpYour patch patches
556d2f055bf6d("ARM: 8187/1: addCONFIG_HAVE_ARCH_BITREVERSEto support rbit instruction") which appears in linux-next via the ARM tree.
Oh, sorry, yes; it should be applied by the ARM folks to their tree then, of course.
Cheers,
Christoph
Quoted 12 lines
There are many uses of "boolean" in lib/Kconfig. Converting just one of them is inefficient and odd.
556d2f055bf6dis a bit of a surprise. It looks good to me from a non-ARM perspective - the__builtin_constant_p()optimisation is sensible, although bitrev on a constant probably isn't very common.I'm not sure about the ARM part though!
__bitrev8()is pretty damn fast. Presumably an inlined rbit instruction is faster still, but not very much?The
Kconfighelp text in556d2f055bf6drather needs some caring for.
Andrew Morton
maintainerQuoted 5 lines · On Mon, 2 Feb 2015 18:12:13 -0500 Christoph Jaeger <[email protected]> wrote:
Quoted 3 lines
Your patch patches
556d2f055bf6d("ARM: 8187/1: addCONFIG_HAVE_ARCH_BITREVERSEto support rbit instruction") which appears in linux-next via the ARM tree.Oh, sorry, yes; it should be applied by the ARM folks to their tree then, of course.
Is OK, I grabbed it. I don't think Russell needs to yank and rebase the current diff.