Skip to contentSkip to conversation

vexpress64: get rid of CONFIG_SYS_EXTRA_OPTIONS

PATCH New Linus Walleij 2 participants 2 messages Jan 23, 2015 – Feb 2, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 3/4 vexpress64: get rid of CONFIG_SYS_EXTRA_OPTIONS

The Versatile Express ARMv8 semihosted FVP platform is still using the legacy CONFIG_SYS_EXTRA_OPTIONS method to configure some compile-time flags. Get rid of this and create a Kconfig entry for the FVP model, and a selectable bool for the semihosting library.

The FVP subboard is now modeled as a target choice so we can eventually choose between different ARMv8 versatile express boards (FVP, base model, Juno...) this way. All dependent symbols are updated to reflect this.

The 64bit Versatile Express board symbols are renamed VEXPRESS64 so we have some chance to see what is actually going on. Tested on the FVP fast model.

---
ChangeLog v1->v2:
- Fix compilation error on the plain Vexpress64 reported by Tom Rini.

---
 arch/arm/Kconfig                       | 14 +++++++++++++-
 board/armltd/vexpress64/Kconfig        | 15 ++++++++++++++-
 configs/vexpress_aemv8a_defconfig      |  2 +-
 configs/vexpress_aemv8a_semi_defconfig |  4 ++--
 include/configs/vexpress_aemv8a.h      | 16 ++++++++--------
 5 files changed, 38 insertions(+), 13 deletions(-)
arch/arm/Kconfig +13 -1
index 5eb1d03cfaaf..d5399f162d57 100644
@@ -51,6 +51,13 @@ config SYS_CPU
         default "sa1100" if CPU_SA1100
 	default "armv8" if ARM64
 
+config SEMIHOSTING
+	bool "support boot from semihosting"
+	help
+	  In emulated environments, semihosting is a way for
+	  the hosted environment to call out to the emulator to
+	  retrieve files from the host machine.
+
 choice
 	prompt "Target select"
 
@@ -720,10 +727,15 @@ config TEGRA
 	select CPU_ARM720T if SPL_BUILD
 	select CPU_V7 if !SPL_BUILD
 
-config TARGET_VEXPRESS_AEMV8A
+config TARGET_VEXPRESS64_AEMV8A
 	bool "Support vexpress_aemv8a"
 	select ARM64
 
+config TARGET_VEXPRESS64_BASE_FVP
+	bool "Support Versatile Express ARMv8a FVP BASE model"
+	select ARM64
+	select SEMIHOSTING
+
 config TARGET_LS2085A_EMU
 	bool "Support ls2085a_emu"
 	select ARM64
board/armltd/vexpress64/Kconfig +14 -1
index 7ebea6317f70..80eaa3d3ab08 100644
@@ -1,4 +1,17 @@
-if TARGET_VEXPRESS_AEMV8A
+if TARGET_VEXPRESS64_AEMV8A
+
+config SYS_BOARD
+	default "vexpress64"
+
+config SYS_VENDOR
+	default "armltd"
+
+config SYS_CONFIG_NAME
+	default "vexpress_aemv8a"
+
+endif
+
+if TARGET_VEXPRESS64_BASE_FVP
 
 config SYS_BOARD
 	default "vexpress64"
configs/vexpress_aemv8a_defconfig +1 -1
index b463a333bc6b..9f4b87655613 100644
@@ -1,3 +1,3 @@
 CONFIG_ARM=y
-CONFIG_TARGET_VEXPRESS_AEMV8A=y
+CONFIG_TARGET_VEXPRESS64_AEMV8A=y
 CONFIG_DEFAULT_DEVICE_TREE="vexpress64"
configs/vexpress_aemv8a_semi_defconfig +2 -2
index 0035ccdaecd4..26cf7db47f84 100644
@@ -1,4 +1,4 @@
-CONFIG_SYS_EXTRA_OPTIONS="SEMIHOSTING,BASE_FVP"
+# Semihosted FVP fast model
 CONFIG_ARM=y
-CONFIG_TARGET_VEXPRESS_AEMV8A=y
+CONFIG_TARGET_VEXPRESS64_BASE_FVP=y
 CONFIG_DEFAULT_DEVICE_TREE="vexpress64"
include/configs/vexpress_aemv8a.h +8 -8
index 027d78b59171..85894bedf8bd 100644
@@ -11,9 +11,9 @@
 /* We use generic board for v8 Versatile Express */
 #define CONFIG_SYS_GENERIC_BOARD
 
-#ifdef CONFIG_BASE_FVP
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 #ifndef CONFIG_SEMIHOSTING
-#error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING
+#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING
 #endif
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_ARMV8_SWITCH_TO_EL1
@@ -21,8 +21,8 @@
 
 #define CONFIG_REMAKE_ELF
 
-#ifndef CONFIG_BASE_FVP
-/* Base FVP not using GICv3 yet */
+#ifndef CONFIG_TARGET_VEXPRESS64_BASE_FVP
+/* Base FVP and Juno not using GICv3 yet */
 #define CONFIG_GICV3
 #endif
 
@@ -40,7 +40,7 @@
 #define CONFIG_BOOTP_VCI_STRING		"U-boot.armv8.vexpress_aemv8a"
 
 /* Link Definitions */
-#ifdef CONFIG_BASE_FVP
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 /* ATF loads u-boot here for BASE_FVP model */
 #define CONFIG_SYS_TEXT_BASE		0x88000000
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
@@ -54,7 +54,7 @@
 
 
 /* SMP Spin Table Definitions */
-#ifdef CONFIG_BASE_FVP
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 #define CPU_RELEASE_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x03f00000)
 #else
 #define CPU_RELEASE_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
@@ -119,7 +119,7 @@
 #define GICR_BASE			(0x2f100000)
 #else
 
-#ifdef CONFIG_BASE_FVP
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 #define GICD_BASE			(0x2f000000)
 #define GICC_BASE			(0x2c000000)
 #else
@@ -191,7 +191,7 @@
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
 /* Initial environment variables */
-#ifdef CONFIG_BASE_FVP
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 				"kernel_name=uImage\0"	\
 				"kernel_addr_r=0x80000000\0"	\
Signature · 1 line
1.9.3
#1 lore raw

PATCH v2 3/4 vexpress64: get rid of CONFIG_SYS_EXTRA_OPTIONS

Quoted 11 lines · Linus Walleij

The Versatile Express ARMv8 semihosted FVP platform is still using the legacy CONFIG_SYS_EXTRA_OPTIONS method to configure some compile-time flags. Get rid of this and create a Kconfig entry for the FVP model, and a selectable bool for the semihosting library.

The FVP subboard is now modeled as a target choice so we can eventually choose between different ARMv8 versatile express boards (FVP, base model, Juno...) this way. All dependent symbols are updated to reflect this.

Quoted 6 lines

The 64bit Versatile Express board symbols are renamed VEXPRESS64 so we have some chance to see what is actually going on. Tested on the FVP fast model.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150202/24cebad8/attachment.sig>