Skip to contentSkip to conversation

vexpress64: support the Juno Development Platform

PATCH New Linus Walleij 2 participants 2 messages Jan 23, 2015 – Feb 2, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 4/4 vexpress64: support the Juno Development Platform

The Juno Development Platform is a physical Versatile Express device with some differences from the emulated semihosting models. The main difference is that the system is split in a SoC and an FPGA where the SoC hosts the serial ports at totally different adresses.

---
ChangeLog v1->v2:
- Remove a dangling C99 comment.

---
 arch/arm/Kconfig                       |  4 ++++
 board/armltd/vexpress64/Kconfig        | 13 +++++++++++++
 board/armltd/vexpress64/MAINTAINERS    |  5 +++++
 configs/vexpress_aemv8a_juno_defconfig |  5 +++++
 include/configs/vexpress_aemv8a.h      | 19 ++++++++++++++++++-
 5 files changed, 45 insertions(+), 1 deletion(-)
 create mode 100644 configs/vexpress_aemv8a_juno_defconfig
arch/arm/Kconfig +4 -0
index d5399f162d57..986b4c5d81db 100644
@@ -736,6 +736,10 @@ config TARGET_VEXPRESS64_BASE_FVP
 	select ARM64
 	select SEMIHOSTING
 
+config TARGET_VEXPRESS64_JUNO
+	bool "Support Versatile Express Juno Development Platform"
+	select ARM64
+
 config TARGET_LS2085A_EMU
 	bool "Support ls2085a_emu"
 	select ARM64
board/armltd/vexpress64/Kconfig +13 -0
index 80eaa3d3ab08..7d5e7bee8b9a 100644
@@ -23,3 +23,16 @@ config SYS_CONFIG_NAME
 	default "vexpress_aemv8a"
 
 endif
+
+if TARGET_VEXPRESS64_JUNO
+
+config SYS_BOARD
+	default "vexpress64"
+
+config SYS_VENDOR
+	default "armltd"
+
+config SYS_CONFIG_NAME
+	default "vexpress_aemv8a"
+
+endif
board/armltd/vexpress64/MAINTAINERS +5 -0
index 66c8dffa1634..0ba044d7ff87 100644
@@ -9,3 +9,8 @@ VEXPRESS_AEMV8A_SEMI BOARD
 M:	Linus Walleij <[email protected]>
 S:	Maintained
 F:	configs/vexpress_aemv8a_semi_defconfig
+
+JUNO DEVELOPMENT PLATFORM BOARD
+M:	Linus Walleij <[email protected]>
+S:	Maintained
+F:	configs/vexpress_aemv8a_juno_defconfig
configs/vexpress_aemv8a_juno_defconfig new file +5 -0
new file mode 100644
index 000000000000..d28a4286e5af
@@ -0,0 +1,5 @@
+# ARM Ltd. Juno Board Reference Design
+CONFIG_ARM=y
+CONFIG_TARGET_VEXPRESS64_JUNO=y
+CONFIG_DEFAULT_DEVICE_TREE="vexpress64"
+CONFIG_SHOW_BOOT_PROGRESS=y
include/configs/vexpress_aemv8a.h +18 -1
index 85894bedf8bd..7fb28a54ba17 100644
@@ -21,7 +21,8 @@
 
 #define CONFIG_REMAKE_ELF
 
-#ifndef CONFIG_TARGET_VEXPRESS64_BASE_FVP
+#if !defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) && \
+    !defined(CONFIG_TARGET_VEXPRESS64_JUNO)
 /* Base FVP and Juno not using GICv3 yet */
 #define CONFIG_GICV3
 #endif
@@ -44,6 +45,9 @@
 /* ATF loads u-boot here for BASE_FVP model */
 #define CONFIG_SYS_TEXT_BASE		0x88000000
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
+#elif CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_SYS_TEXT_BASE		0xe0000000
+#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
 #else
 #define CONFIG_SYS_TEXT_BASE		0x80000000
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
@@ -88,10 +92,15 @@
 #define V2M_KMI0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
 #define V2M_KMI1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
 
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define V2M_UART0			0x7ff80000
+#define V2M_UART1			0x7ff70000
+#else /* Not Juno */
 #define V2M_UART0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
 #define V2M_UART1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
 #define V2M_UART2			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
 #define V2M_UART3			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
+#endif
 
 #define V2M_WDT				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
 
@@ -122,6 +131,9 @@
 #ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 #define GICD_BASE			(0x2f000000)
 #define GICC_BASE			(0x2c000000)
+#elif CONFIG_TARGET_VEXPRESS64_JUNO
+#define GICD_BASE			(0x2C010000)
+#define GICC_BASE			(0x2C02f000)
 #else
 #define GICD_BASE			(0x2C001000)
 #define GICC_BASE			(0x2C002000)
@@ -140,7 +152,11 @@
 
 /* PL011 Serial Configuration */
 #define CONFIG_PL011_SERIAL
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_PL011_CLOCK		7273800
+#else
 #define CONFIG_PL011_CLOCK		24000000
+#endif
 #define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
 					 (void *)CONFIG_SYS_SERIAL1}
 #define CONFIG_CONS_INDEX		0
@@ -161,6 +177,7 @@
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_IMI
+#define CONFIG_CMD_LOADB
 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
Signature · 1 line
1.9.3
#1 lore raw

PATCH v2 4/4 vexpress64: support the Juno Development Platform

Quoted 7 lines · Linus Walleij

The Juno Development Platform is a physical Versatile Express device with some differences from the emulated semihosting models. The main difference is that the system is split in a SoC and an FPGA where the SoC hosts the serial ports at totally different adresses.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150202/b28965a1/attachment.sig>