Skip to contentSkip to conversation

kms_cursor_crc: Kernel now checks for integer overflow

PATCH In review Matt Roper 2 participants 3 messages Feb 2, 2015 – Feb 3, 2015

lore
Share & tools
lore

Matt Roper

author
#0 lore raw

PATCH 1/1 kms_cursor_crc: Kernel now checks for integer overflow

As of kernel commit

commit a679064a7e9e8799177a64a31668a34a1bc6a4f1
Author: Matt Roper <[email protected]>
Date: Fri Jan 30 16:22:37 2015 -0800

drm/i915: Switch planes from transitional helpers to full atomic helpers

the kernel now checks for cursor coordinates that would result in integer overflow and returns -ERANGE, similar to the checking that was already done for other plane types. We update kms_cursor_crc here to reflect this small behavior change:
* Check for success at extreme boundary conditions INT_MAX-{width,height} rather than INT_MAX
* Add new check for success at SHRT_MAX; if the driver were to internally use short values and overflow, we could have the cursor reappear on the screen.
* Add a test for failure with proper error code at INT_MAX-{width,height}+1

---
 tests/kms_cursor_crc.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)
tests/kms_cursor_crc.c +28 -1
index e1390a7..64fea12 100644
@@ -139,6 +139,29 @@ static void do_single_test(data_t *data, int x, int y)
 	igt_assert(igt_crc_equal(&crc, &ref_crc));
 }
 
+static void do_fail_test(data_t *data, int x, int y, int expect)
+{
+	igt_display_t *display = &data->display;
+	igt_plane_t *cursor;
+	cairo_t *cr = igt_get_cairo_ctx(data->drm_fd, &data->primary_fb);
+	int ret;
+
+	igt_print_activity();
+
+	/* Hardware test */
+	igt_paint_test_pattern(cr, data->screenw, data->screenh);
+	cursor_enable(data);
+	cursor = igt_output_get_plane(data->output, IGT_PLANE_CURSOR);
+	igt_plane_set_position(cursor, x, y);
+	ret = igt_display_try_commit2(display, COMMIT_LEGACY);
+
+	igt_plane_set_position(cursor, 0, 0);
+	cursor_disable(data);
+	igt_display_commit(display);
+
+	igt_assert(ret == expect);
+}
+
 static void do_test(data_t *data,
 		    int left, int right, int top, int bottom)
 {
@@ -201,7 +224,11 @@ static void test_crc_offscreen(data_t *data)
 	do_test(data, left - (cursor_w+512), right + (cursor_w+512), top - (cursor_h+512), bottom + (cursor_h+512));
 
 	/* go nuts */
-	do_test(data, INT_MIN, INT_MAX, INT_MIN, INT_MAX);
+	do_test(data, INT_MIN, INT_MAX - cursor_w, INT_MIN, INT_MAX - cursor_h);
+	do_test(data, SHRT_MIN, SHRT_MAX, SHRT_MIN, SHRT_MAX);
+
+	/* Make sure we get -ERANGE on integer overflow */
+	do_fail_test(data, INT_MAX - cursor_w + 1, INT_MAX - cursor_h + 1, -ERANGE);
 }
 
 static void test_crc_sliding(data_t *data)
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw
Quoted 19 lines · Matt Roper

As of kernel commit

commit a679064a7e9e8799177a64a31668a34a1bc6a4f1
Author: Matt Roper <[email protected]>
Date: Fri Jan 30 16:22:37 2015 -0800

drm/i915: Switch planes from transitional helpers to full atomic helpers

the kernel now checks for cursor coordinates that would result in integer overflow and returns -ERANGE, similar to the checking that was already done for other plane types. We update kms_cursor_crc here to reflect this small behavior change:
* Check for success at extreme boundary conditions INT_MAX-{width,height} rather than INT_MAX
* Add new check for success at SHRT_MAX; if the driver were to internally use short values and overflow, we could have the cursor reappear on the screen.
* Add a test for failure with proper error code at INT_MAX-{width,height}+1

Quoted 1 line

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88917

?

Quoted 58 lines
---
 tests/kms_cursor_crc.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)
tests/kms_cursor_crc.c +28 -1
index e1390a7..64fea12 100644
@@ -139,6 +139,29 @@ static void do_single_test(data_t *data, int x, int y)
 	igt_assert(igt_crc_equal(&crc, &ref_crc));
 }
 
+static void do_fail_test(data_t *data, int x, int y, int expect)
+{
+	igt_display_t *display = &data->display;
+	igt_plane_t *cursor;
+	cairo_t *cr = igt_get_cairo_ctx(data->drm_fd, &data->primary_fb);
+	int ret;
+
+	igt_print_activity();
+
+	/* Hardware test */
+	igt_paint_test_pattern(cr, data->screenw, data->screenh);
+	cursor_enable(data);
+	cursor = igt_output_get_plane(data->output, IGT_PLANE_CURSOR);
+	igt_plane_set_position(cursor, x, y);
+	ret = igt_display_try_commit2(display, COMMIT_LEGACY);
+
+	igt_plane_set_position(cursor, 0, 0);
+	cursor_disable(data);
+	igt_display_commit(display);
+
+	igt_assert(ret == expect);
+}
+
 static void do_test(data_t *data,
 		    int left, int right, int top, int bottom)
 {
@@ -201,7 +224,11 @@ static void test_crc_offscreen(data_t *data)
 	do_test(data, left - (cursor_w+512), right + (cursor_w+512), top - (cursor_h+512), bottom + (cursor_h+512));
 
 	/* go nuts */
-	do_test(data, INT_MIN, INT_MAX, INT_MIN, INT_MAX);
+	do_test(data, INT_MIN, INT_MAX - cursor_w, INT_MIN, INT_MAX - cursor_h);
+	do_test(data, SHRT_MIN, SHRT_MAX, SHRT_MIN, SHRT_MAX);
+
+	/* Make sure we get -ERANGE on integer overflow */
+	do_fail_test(data, INT_MAX - cursor_w + 1, INT_MAX - cursor_h + 1, -ERANGE);
 }
 
 static void test_crc_sliding(data_t *data)
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#2 lore raw
Quoted 20 lines · Jani Nikula
Quoted 19 lines · Matt Roper

As of kernel commit

commit a679064a7e9e8799177a64a31668a34a1bc6a4f1
Author: Matt Roper <[email protected]>
Date: Fri Jan 30 16:22:37 2015 -0800

drm/i915: Switch planes from transitional helpers to full atomic helpers

the kernel now checks for cursor coordinates that would result in integer overflow and returns -ERANGE, similar to the checking that was already done for other plane types. We update kms_cursor_crc here to reflect this small behavior change:
* Check for success at extreme boundary conditions INT_MAX-{width,height} rather than INT_MAX
* Add new check for success at SHRT_MAX; if the driver were to internally use short values and overflow, we could have the cursor reappear on the screen.
* Add a test for failure with proper error code at INT_MAX-{width,height}+1

Quoted 6 lines
Quoted 1 line

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88917

?

Yep, this should fix that one. Good catch.

Matt

Quoted 63 lines
Quoted 60 lines

---
 tests/kms_cursor_crc.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)
tests/kms_cursor_crc.c +28 -1
index e1390a7..64fea12 100644
@@ -139,6 +139,29 @@ static void do_single_test(data_t *data, int x, int y)
 	igt_assert(igt_crc_equal(&crc, &ref_crc));
 }
 
+static void do_fail_test(data_t *data, int x, int y, int expect)
+{
+	igt_display_t *display = &data->display;
+	igt_plane_t *cursor;
+	cairo_t *cr = igt_get_cairo_ctx(data->drm_fd, &data->primary_fb);
+	int ret;
+
+	igt_print_activity();
+
+	/* Hardware test */
+	igt_paint_test_pattern(cr, data->screenw, data->screenh);
+	cursor_enable(data);
+	cursor = igt_output_get_plane(data->output, IGT_PLANE_CURSOR);
+	igt_plane_set_position(cursor, x, y);
+	ret = igt_display_try_commit2(display, COMMIT_LEGACY);
+
+	igt_plane_set_position(cursor, 0, 0);
+	cursor_disable(data);
+	igt_display_commit(display);
+
+	igt_assert(ret == expect);
+}
+
 static void do_test(data_t *data,
 		    int left, int right, int top, int bottom)
 {
@@ -201,7 +224,11 @@ static void test_crc_offscreen(data_t *data)
 	do_test(data, left - (cursor_w+512), right + (cursor_w+512), top - (cursor_h+512), bottom + (cursor_h+512));
 
 	/* go nuts */
-	do_test(data, INT_MIN, INT_MAX, INT_MIN, INT_MAX);
+	do_test(data, INT_MIN, INT_MAX - cursor_w, INT_MIN, INT_MAX - cursor_h);
+	do_test(data, SHRT_MIN, SHRT_MAX, SHRT_MIN, SHRT_MAX);
+
+	/* Make sure we get -ERANGE on integer overflow */
+	do_fail_test(data, INT_MAX - cursor_w + 1, INT_MAX - cursor_h + 1, -ERANGE);
 }
 
 static void test_crc_sliding(data_t *data)
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 9 lines
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx