Skip to contentSkip to conversation

staging: speakup: Fix warning of line over 80 characters.

PATCH In review Shirish Gajera 2 participants 4 messages Jan 31, 2015 – Feb 8, 2015 2 messages not in the archive Staging

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 staging: speakup: Fix warning of line over 80 characters.

This patch fixes the checkpatch.pl warning:

WARNING: line over 80 characters

All line over 80 characters in driver/staging/speakup/* are fixed. Aditional changes suggest by mailing list are also fixed.

---
 drivers/staging/speakup/main.c           | 12 ++++++++----
 drivers/staging/speakup/serialio.h       |  3 ++-
 drivers/staging/speakup/speakup.h        |  6 ++++--
 drivers/staging/speakup/speakup_decext.c |  6 ++++--
 drivers/staging/speakup/speakup_decpc.c  |  6 ++++--
 drivers/staging/speakup/spk_priv.h       |  3 ++-
 drivers/staging/speakup/spk_types.h      |  3 ++-
 drivers/staging/speakup/synth.c          | 10 +++++-----
 8 files changed, 31 insertions(+), 18 deletions(-)
drivers/staging/speakup/main.c +8 -4
index e9f0c15..4af36ca 100644
@@ -422,8 +422,10 @@ static void announce_edge(struct vc_data *vc, int msg_id)
 {
 	if (spk_bleeps & 1)
 		bleep(spk_y);
-	if ((spk_bleeps & 2) && (msg_id < edge_quiet))
-		synth_printf("%s\n", spk_msg_get(MSG_EDGE_MSGS_START + msg_id - 1));
+	if ((spk_bleeps & 2) && (msg_id < edge_quiet)) {
+		synth_printf("%s\n",
+			spk_msg_get(MSG_EDGE_MSGS_START + msg_id - 1));
+	}
 }
 
 static void speak_char(u_char ch)
@@ -1131,7 +1133,8 @@ static void spkup_write(const char *in_buf, int count)
 	if (in_count > 2 && rep_count > 2) {
 		if (last_type & CH_RPT) {
 			synth_printf(" ");
-			synth_printf(spk_msg_get(MSG_REPEAT_DESC2), ++rep_count);
+			synth_printf(spk_msg_get(MSG_REPEAT_DESC2),
+				     ++rep_count);
 			synth_printf(" ");
 		}
 		rep_count = 0;
@@ -1847,7 +1850,8 @@ static void speakup_win_set(struct vc_data *vc)
 			win_right = spk_x;
 		}
 		snprintf(info, sizeof(info), spk_msg_get(MSG_WINDOW_BOUNDARY),
-			 (win_start) ? spk_msg_get(MSG_END) : spk_msg_get(MSG_START),
+			 (win_start) ? spk_msg_get(MSG_END) :
+				       spk_msg_get(MSG_START),
 			 (int)spk_y + 1, (int)spk_x + 1);
 	}
 	synth_printf("%s\n", info);
drivers/staging/speakup/serialio.h +2 -1
index 317bb84..1b39921 100644
@@ -34,6 +34,7 @@ struct old_serial_port {
 #define SPK_TIMEOUT 100
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 
-#define spk_serial_tx_busy() ((inb(speakup_info.port_tts + UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY)
+#define spk_serial_tx_busy() \
+	((inb(speakup_info.port_tts + UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY)
 
 #endif
drivers/staging/speakup/speakup.h +4 -2
index 898dce5..d194ebb 100644
@@ -61,10 +61,12 @@ extern struct st_var_header *spk_get_var_header(enum var_id_t var_id);
 extern struct st_var_header *spk_var_header_by_name(const char *name);
 extern struct punc_var_t *spk_get_punc_var(enum var_id_t var_id);
 extern int spk_set_num_var(int val, struct st_var_header *var, int how);
-extern int spk_set_string_var(const char *page, struct st_var_header *var, int len);
+extern int spk_set_string_var(const char *page, struct st_var_header *var,
+			      int len);
 extern int spk_set_mask_bits(const char *input, const int which, const int how);
 extern special_func spk_special_handler;
-extern int spk_handle_help(struct vc_data *vc, u_char type, u_char ch, u_short key);
+extern int spk_handle_help(struct vc_data *vc, u_char type, u_char ch,
+			   u_short key);
 extern int synth_init(char *name);
 extern void synth_release(void);
 
drivers/staging/speakup/speakup_decext.c +4 -2
index 5550290..d86a579 100644
@@ -207,10 +207,12 @@ static void do_catch_up(struct spk_synth *synth)
 			if (time_after_eq(jiffies, jiff_max)) {
 				if (!in_escape)
 					spk_serial_out(PROCSPEECH);
-				spin_lock_irqsave(&speakup_info.spinlock, flags);
+				spin_lock_irqsave(&speakup_info.spinlock,
+						  flags);
 				jiffy_delta_val = jiffy_delta->u.n.value;
 				delay_time_val = delay_time->u.n.value;
-				spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+				spin_unlock_irqrestore(&speakup_info.spinlock,
+						       flags);
 				schedule_timeout(msecs_to_jiffies
 						 (delay_time_val));
 				jiff_max = jiffies + jiffy_delta_val;
drivers/staging/speakup/speakup_decpc.c +4 -2
index 7c9c432..b520a76 100644
@@ -423,10 +423,12 @@ static void do_catch_up(struct spk_synth *synth)
 			if (time_after_eq(jiffies, jiff_max)) {
 				if (!in_escape)
 					dt_sendchar(PROCSPEECH);
-				spin_lock_irqsave(&speakup_info.spinlock, flags);
+				spin_lock_irqsave(&speakup_info.spinlock,
+						  flags);
 				jiffy_delta_val = jiffy_delta->u.n.value;
 				delay_time_val = delay_time->u.n.value;
-				spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+				spin_unlock_irqrestore(&speakup_info.spinlock,
+						       flags);
 				schedule_timeout(msecs_to_jiffies
 						 (delay_time_val));
 				jiff_max = jiffies + jiffy_delta_val;
drivers/staging/speakup/spk_priv.h +2 -1
index 637ba67..fb5742e 100644
@@ -62,7 +62,8 @@ extern ssize_t spk_var_store(struct kobject *kobj, struct kobj_attribute *attr,
 	const char *buf, size_t count);
 
 extern int spk_serial_synth_probe(struct spk_synth *synth);
-extern const char *spk_synth_immediate(struct spk_synth *synth, const char *buff);
+extern const char *spk_synth_immediate(struct spk_synth *synth,
+				       const char *buff);
 extern void spk_do_catch_up(struct spk_synth *synth);
 extern void spk_synth_flush(struct spk_synth *synth);
 extern int spk_synth_is_alive_nop(struct spk_synth *synth);
drivers/staging/speakup/spk_types.h +2 -1
index 8c565c9..d6e30ba 100644
@@ -167,7 +167,8 @@ struct spk_synth {
 	int *default_vol;
 	int (*probe)(struct spk_synth *synth);
 	void (*release)(void);
-	const char *(*synth_immediate)(struct spk_synth *synth, const char *buff);
+	const char *(*synth_immediate)(struct spk_synth *synth,
+				       const char *buff);
 	void (*catch_up)(struct spk_synth *synth);
 	void (*flush)(struct spk_synth *synth);
 	int (*is_alive)(struct spk_synth *synth);
drivers/staging/speakup/synth.c +5 -5
index f3aa423..8d28cc9 100644
@@ -30,12 +30,12 @@ struct speakup_info_t speakup_info = {
 	 * must be taken at each kernel->speakup transition and released at
 	 * each corresponding speakup->kernel transition.
 	 *
-	 * The progression thread only interferes with the speakup machinery through
-	 * the synth buffer, so only needs to take the lock while tinkering with
-	 * the buffer.
+	 * The progression thread only interferes with the speakup machinery
+	 * through the synth buffer, so only needs to take the lock while
+	 * tinkering with the buffer.
 	 *
-	 * We use spin_lock/trylock_irqsave and spin_unlock_irqrestore with this
-	 * spinlock because speakup needs to disable the keyboard IRQ.
+	 * We use spin_lock/trylock_irqsave and spin_unlock_irqrestore with
+	 * this spinlock because speakup needs to disable the keyboard IRQ.
 	 */
 	.spinlock = __SPIN_LOCK_UNLOCKED(speakup_info.spinlock),
 	.flushing = 0,
Signature · 1 line
1.9.1
maintainer
#1 lore raw
Quoted 8 lines · Shirish Gajera

This patch fixes the checkpatch.pl warning:

WARNING: line over 80 characters

All line over 80 characters in driver/staging/speakup/* are fixed. Aditional changes suggest by mailing list are also fixed.

Quoted 10 lines
---
 drivers/staging/speakup/main.c           | 12 ++++++++----
 drivers/staging/speakup/serialio.h       |  3 ++-
 drivers/staging/speakup/speakup.h        |  6 ++++--
 drivers/staging/speakup/speakup_decext.c |  6 ++++--
 drivers/staging/speakup/speakup_decpc.c  |  6 ++++--
 drivers/staging/speakup/spk_priv.h       |  3 ++-
 drivers/staging/speakup/spk_types.h      |  3 ++-
 drivers/staging/speakup/synth.c          | 10 +++++-----
 8 files changed, 31 insertions(+), 18 deletions(-)

This fails to apply to my tree for some reason :(

Can you refresh it and resend?

thanks,

greg k-h

A message that is not in the archive (sent off-list or not yet received): CAG77vrqfrAdQErz91Nq+7j_mjBigSkL9EGuejdyOo8553p2hBA@mail.gmail.com

maintainer
#3 lore raw
Quoted 28 lines · shirish gajera

On Sat, Feb 7, 2015 at 1:09 AM, Greg KH <[email protected]> wrote:

On Sat, Jan 31, 2015 at 02:19:43PM -0800, Shirish Gajera wrote:
> This patch fixes the checkpatch.pl warning:
>
> WARNING: line over 80 characters
>
> All line over 80 characters in driver/staging/speakup/* are fixed. > Aditional changes suggest by mailing list are also fixed. >
> Signed-off-by: Shirish Gajera <[email protected]> > ---
>  drivers/staging/speakup/main.c           | 12 ++++++++---- >  drivers/staging/speakup/serialio.h       |  3 ++-
>  drivers/staging/speakup/speakup.h        |  6 ++++-- >  drivers/staging/speakup/speakup_decext.c |  6 ++++-- >  drivers/staging/speakup/speakup_decpc.c  |  6 ++++-- >  drivers/staging/speakup/spk_priv.h       |  3 ++-
>  drivers/staging/speakup/spk_types.h      |  3 ++-
>  drivers/staging/speakup/synth.c          | 10 +++++----- >  8 files changed, 31 insertions(+), 18 deletions(-)

This fails to apply to my tree for some reason :(

Can you refresh it and resend?

thanks,

Quoted 8 lines

greg k-h

It is already refreshed from last time.

Can you clarify refresh means git pull and resend right ? Is there any other way of refresh ?

Yes it does. What tree and branch are you making these against? They should be against my staging.git tree on git.kernel.org, and against the staging-testing branch. Anything else might have conflicts.

thanks,

greg k-h

A message that is not in the archive (sent off-list or not yet received): CAG77vrpd7Fy2bKCEKJ_Z=j6fJfsKLANkWf6KB1ErjPLQm4b-0g@mail.gmail.com

maintainer
#5 lore raw
Quoted 46 lines · shirish gajera

On Sat, Feb 7, 2015 at 4:33 PM, Greg KH <[email protected]> wrote:

On Sat, Feb 07, 2015 at 09:46:37AM -0800, shirish gajera wrote:
> On Sat, Feb 7, 2015 at 1:09 AM, Greg KH <[email protected]> wrote:
>
>     On Sat, Jan 31, 2015 at 02:19:43PM -0800, Shirish Gajera wrote:
>     > This patch fixes the checkpatch.pl warning:
>     >
>     > WARNING: line over 80 characters
>     >
>     > All line over 80 characters in driver/staging/speakup/* are fixed. >     > Aditional changes suggest by mailing list are also fixed. >     >
>     > Signed-off-by: Shirish Gajera <[email protected]> >     > ---
>     >  drivers/staging/speakup/main.c           | 12 ++++++++---- >     >  drivers/staging/speakup/serialio.h       |  3 ++-
>     >  drivers/staging/speakup/speakup.h        |  6 ++++-- >     >  drivers/staging/speakup/speakup_decext.c |  6 ++++-- >     >  drivers/staging/speakup/speakup_decpc.c  |  6 ++++-- >     >  drivers/staging/speakup/spk_priv.h       |  3 ++-
>     >  drivers/staging/speakup/spk_types.h      |  3 ++-
>     >  drivers/staging/speakup/synth.c          | 10 +++++----- >     >  8 files changed, 31 insertions(+), 18 deletions(-)
>
>     This fails to apply to my tree for some reason :(
>
>     Can you refresh it and resend?
>
>     thanks,
>
>     greg k-h
>
>
>
> It is already refreshed from last time.
>
> Can you clarify refresh means git pull and resend right ? Is there any other
> way of refresh ?

Yes it does.  What tree and branch are you making these against?  They should be against my staging.git tree on git.kernel.org, and against the staging-testing branch.  Anything else might have conflicts.

Quoted 7 lines

thanks,

greg k-h

I clone this directory git clone -b staging-next git://git.kernel.org/pub/scm/
linux/kernel/git/gregkh/staging.git So, I am hoping it's pointing to your tree.

Yes it is.

Quoted 6 lines

I still didn't understand what staging-testing branch is ? Also I can check if there is some conflicts. I check this one http://
driverdev.linuxdriverproject.org/pipermail/driverdev-devel/ for january and February I don't see any conflicts.

Can you elaborate more why it's failing ?

I can't dig through your web link, but if you don't know about git branches, then odds are you are making this against the wrong set of code.

Read up some tutorials on git that describe how to work with branches, that should help out.

A short example of what to do might be:
 git clone -b staging-next git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
cd staging
git checkout -t -b staging-testing origin/staging-testing
git chekout -b work
<now do work>

that will create a local branch called "staging-testing" that will track my upstream staging-testing, and a local branch for you to work on called "work". Then diff between work and staging-testing and you should be all set.

Hope this helps,

greg k-h