Skip to contentSkip to conversation

add usb support for hi6220

PATCH Superseded Zhangfei Gao 2 participants 7 messages Feb 10, 2015

Subsystems (3)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover add usb support for hi6220

v3:
fix typo and add -EPROBE_DEFER of regulator, pointed by Peter

v2:
address comments from Sergei and Peter
add hi6220_phy_setup(false) code

v1:
hi6220 usb controller is inherited from dwc2
add phy accordingly
support otg gadget/host

Zhangfei Gao (5):
Documentation: dt-bindings: add dt binding info for hi6220 dwc2
Documentation: dt-bindings: add dt binding info for hi6220
usb: dwc2: platform: add hi6220 support
usb: phy: load usb phy earlier
usb: phy: add phy-hi6220-usb

 Documentation/devicetree/bindings/usb/dwc2.txt     |   1 +
 .../devicetree/bindings/usb/hi6220-usb.txt         |  49 ++++
 drivers/usb/Makefile                               |   2 +-
 drivers/usb/dwc2/platform.c                        |  30 ++
 drivers/usb/phy/Kconfig                            |   9 +
 drivers/usb/phy/Makefile                           |   1 +
 drivers/usb/phy/phy-hi6220-usb.c                   | 308 +++++++++++++++++++++
 7 files changed, 399 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/usb/hi6220-usb.txt
 create mode 100644 drivers/usb/phy/phy-hi6220-usb.c
Signature · 1 line
1.9.1
#1 lore raw

PATCH v3 1/5 Documentation: dt-bindings: add dt binding info for hi6220 dwc2

Add necessary dwc2 binding documentation for Hisilicon soc: hi6220

---
 Documentation/devicetree/bindings/usb/dwc2.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/usb/dwc2.txt +1 -0
index fd132cb..2213682 100644
@@ -4,6 +4,7 @@ Platform DesignWare HS OTG USB 2.0 controller
 Required properties:
 - compatible : One of:
   - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
+  - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
   - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
   - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
   - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
Signature · 1 line
1.9.1
#2 lore raw

PATCH v3 2/5 Documentation: dt-bindings: add dt binding info for hi6220

In reply to Zhangfei Gao
---
 .../devicetree/bindings/usb/hi6220-usb.txt         | 49 ++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/hi6220-usb.txt
Documentation/devicetree/bindings/usb/hi6220-usb.txt new file +49 -0
new file mode 100644
index 0000000..b8278de
@@ -0,0 +1,49 @@
+Hisilicon hi6220 SoC USB controller
+-----------------------------
+
+usb controller is inherited from dwc2, refer dwc2.txt
+-----
+
+Required properties:
+- compatible: "hisilicon,hi6220-usb"
+Refer to dwc2.txt for dwc2 usb properties
+
+
+PHY:
+-----
+
+Required properties:
+- compatible: "hisilicon,hi6220-usb-phy"
+- vcc-supply: phandle to the regulator that provides power to the PHY.
+- clocks: phandle and clock specifier of the PHY clock.
+- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
+- hisilicon,gpio-vbus: gpio of detecting vbus.
+- hisilicon,gpio-id: gpio of detecting id.
+
+Example:
+
+	peripheral_ctrl: syscon at f7030000 {
+	        compatible = "syscon";
+	        reg = <0x0 0xf7030000 0x0 0x1000>;
+	};
+
+	usb2_phy: usbphy {
+		compatible = "hisilicon,hi6220-usb-phy";
+		vcc-supply = <&fixed_5v_hub>;
+		hisilicon,gpio-vbus = <&gpio2 6 0>;
+		hisilicon,gpio-id = <&gpio2 5 0>;
+		hisilicon,peripheral-syscon = <&peripheral_ctrl>;
+		clocks = <&clock_sys HI6220_USBOTG_HCLK>;
+	};
+
+	usb: usb at f72c0000 {
+		compatible = "hisilicon,hi6220-usb";
+		reg = <0x0 0xf72c0000 0x0 0x40000>;
+		phys = <&usb2_phy>;
+		dr_mode = "otg";
+		g-use-dma;
+		g-rx-fifo-size = <512>;
+		g-np-tx-fifo-size = <128>;
+		g-tx-fifo-size = <128>;
+		interrupts = <0 77 0x4>;
+	};
Signature · 1 line
1.9.1
#3 lore raw

PATCH v3 2/5 Documentation: dt-bindings: add dt binding info for hi6220

Quoted 23 lines · Zhangfei Gao
---
 .../devicetree/bindings/usb/hi6220-usb.txt         | 49 ++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/hi6220-usb.txt
Documentation/devicetree/bindings/usb/hi6220-usb.txt new file +11 -0
new file mode 100644
index 0000000..b8278de
@@ -0,0 +1,49 @@
+Hisilicon hi6220 SoC USB controller
+-----------------------------
+
+usb controller is inherited from dwc2, refer dwc2.txt
+-----
+
+Required properties:
+- compatible: "hisilicon,hi6220-usb"
+Refer to dwc2.txt for dwc2 usb properties
+
+

Documentation/devicetree/bindings/usb/hi6220-usb.txt line 21

Quoted 10 lines
Documentation/devicetree/bindings/usb/hi6220-usb.txt new file +10 -0
+PHY:
+-----
+
+Required properties:
+- compatible: "hisilicon,hi6220-usb-phy"
+- vcc-supply: phandle to the regulator that provides power to the PHY.
+- clocks: phandle and clock specifier of the PHY clock.
+- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
+- hisilicon,gpio-vbus: gpio of detecting vbus.
+- hisilicon,gpio-id: gpio of detecting id.

These should be vbus-gpios and id-gpios respectively.

Documentation/devicetree/bindings/usb/hi6220-usb.txt line 28

Quoted 7 lines
Documentation/devicetree/bindings/usb/hi6220-usb.txt new file +7 -0
+
+Example:
+
+	peripheral_ctrl: syscon at f7030000 {
+	        compatible = "syscon";
+	        reg = <0x0 0xf7030000 0x0 0x1000>;
+	};

We should have a real string for this in addition to "syscon".

Thanks,
Mark.

#4 lore raw

PATCH v3 3/5 usb: dwc2: platform: add hi6220 support

In reply to Zhangfei Gao
---
 drivers/usb/dwc2/platform.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
drivers/usb/dwc2/platform.c +30 -0
index ae095f0..f7c67db 100644
@@ -50,6 +50,35 @@
 
 static const char dwc2_driver_name[] = "dwc2";
 
+static const struct dwc2_core_params params_hi6220 = {
+	.otg_cap			= 2,	/* No HNP/SRP capable */
+	.otg_ver			= 0,	/* 1.3 */
+	.dma_enable			= 1,
+	.dma_desc_enable		= 0,
+	.speed				= 0,	/* High Speed */
+	.enable_dynamic_fifo		= 1,
+	.en_multiple_tx_fifo		= 1,
+	.host_rx_fifo_size		= 512,
+	.host_nperio_tx_fifo_size	= 512,
+	.host_perio_tx_fifo_size	= 512,
+	.max_transfer_size		= 65535,
+	.max_packet_count		= 511,
+	.host_channels			= 16,
+	.phy_type			= 1,	/* UTMI */
+	.phy_utmi_width			= 8,
+	.phy_ulpi_ddr			= 0,	/* Single */
+	.phy_ulpi_ext_vbus		= 0,
+	.i2c_enable			= 0,
+	.ulpi_fs_ls			= 0,
+	.host_support_fs_ls_low_power	= 0,
+	.host_ls_low_power_phy_clk	= 0,	/* 48 MHz */
+	.ts_dline			= 0,
+	.reload_ctl			= 0,
+	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 <<
+					  GAHBCFG_HBSTLEN_SHIFT,
+	.uframe_sched			= 0,
+};
+
 static const struct dwc2_core_params params_bcm2835 = {
 	.otg_cap			= 0,	/* HNP/SRP capable */
 	.otg_ver			= 0,	/* 1.3 */
@@ -129,6 +158,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
 
 static const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
+	{ .compatible = "hisilicon,hi6220-usb", .data = &params_hi6220 },
 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
 	{ .compatible = "snps,dwc2", .data = NULL },
 	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
Signature · 1 line
1.9.1
#5 lore raw

PATCH v3 4/5 usb: phy: load usb phy earlier

In reply to Zhangfei Gao

Since phy is definitely used in usb controller, load the phy earlier to make boot time shorter.

---
 drivers/usb/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/Makefile +1 -1
index 2f1e2aa..d8926c6 100644
@@ -5,6 +5,7 @@
 # Object files in subdirectories
 
 obj-$(CONFIG_USB)		+= core/
+obj-$(CONFIG_USB_SUPPORT)	+= phy/
 
 obj-$(CONFIG_USB_DWC3)		+= dwc3/
 obj-$(CONFIG_USB_DWC2)		+= dwc2/
@@ -48,7 +49,6 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
-obj-$(CONFIG_USB_SUPPORT)	+= phy/
 obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
Signature · 1 line
1.9.1
#6 lore raw

PATCH v3 5/5 usb: phy: add phy-hi6220-usb

In reply to Zhangfei Gao

Add usb phy controller for hi6220 platform

---
 drivers/usb/phy/Kconfig          |   9 ++
 drivers/usb/phy/Makefile         |   1 +
 drivers/usb/phy/phy-hi6220-usb.c | 308 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 318 insertions(+)
 create mode 100644 drivers/usb/phy/phy-hi6220-usb.c
drivers/usb/phy/Kconfig +9 -0
index c6d0c8e..405a3d0 100644
@@ -173,6 +173,15 @@ config USB_MXS_PHY
 
 	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
 
+config USB_HI6220_PHY
+	tristate "hi6220 USB PHY support"
+	select USB_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HISILICON HI6220 USB PHY.
+
+	  To compile this driver as a module, choose M here.
+
 config USB_RCAR_PHY
 	tristate "Renesas R-Car USB PHY support"
 	depends on USB || USB_GADGET
drivers/usb/phy/Makefile +1 -0
index 75f2bba..00172d3 100644
@@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
 obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
 obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
 obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
+obj-$(CONFIG_USB_HI6220_PHY)		+= phy-hi6220-usb.o
 obj-$(CONFIG_USB_ISP1301)		+= phy-isp1301.o
 obj-$(CONFIG_USB_MSM_OTG)		+= phy-msm-usb.o
 obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
drivers/usb/phy/phy-hi6220-usb.c new file +308 -0

308 lines not on this page · raw message

Signature · 1 line
1.9.1