arm:gplugd: Convert to generic board
PATCH 1/2 arm:gplugd: Convert to generic board
Enable CONFIG_SYS_GENERIC_BOARD for Marvell Gplugd.
--- include/configs/gplugd.h | 5 +++++ 1 file changed, 5 insertions(+)
include/configs/gplugd.h +5 -0
@@ -26,6 +26,11 @@#endif /* +* Generic board support +*/ +#define CONFIG_SYS_GENERIC_BOARD + +/* * Version number information */ #define CONFIG_IDENT_STRING "\nMarvell-gplugD"
--
2.3.0
************************************************************************************************************************************************************* eInfochips Business Disclaimer: This e-mail message and all attachments transmitted with it are intended solely for the use of the addressee and may contain legally privileged and confidential information. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by replying to this message and please delete it from your computer. Any views expressed in this message are those of the individual sender unless otherwise stated. Company has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email. *************************************************************************************************************************************************************
PATCH 2/2 arm:aspenite: Convert to generic board
Enable CONFIG_SYS_GENERIC_BOARD for Marvell aspenite.
--- include/configs/aspenite.h | 5 +++++ 1 file changed, 5 insertions(+)
include/configs/aspenite.h +5 -0
@@ -11,6 +11,11 @@#define __CONFIG_ASPENITE_H/* +* Generic Board support +*/ +#define CONFIG_SYS_GENERIC_BOARD + +/* * Version number information */ #define CONFIG_IDENT_STRING "\nMarvell-Aspenite DB"
--
2.3.0
************************************************************************************************************************************************************* eInfochips Business Disclaimer: This e-mail message and all attachments transmitted with it are intended solely for the use of the addressee and may contain legally privileged and confidential information. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by replying to this message and please delete it from your computer. Any views expressed in this message are those of the individual sender unless otherwise stated. Company has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email. *************************************************************************************************************************************************************
PATCH 2/2 arm:aspenite: Convert to generic board
Quoted 34 lines
-----Original Message-----
From: Ajay Bhargav [mailto:ajay.bhargav at einfochips.com]
Sent: 16 February 2015 18:37
To: u-boot at lists.denx.de; marex at denx.de
Cc: trini at ti.com; Prafulla Wadaskar; yamada.m at jp.panasonic.com; Ajay Bhargav
Subject: [PATCH 2/2] arm:aspenite: Convert to generic boardEnable
CONFIG_SYS_GENERIC_BOARDfor Marvell aspenite.Signed-off-by Ajay Bhargav <[email protected]>--- include/configs/aspenite.h | 5 +++++ 1 file changed, 5 insertions(+)include/configs/aspenite.h index renamed from include/configs/aspenite.h +0
-0727b14a..5258486 100644
include/configs/aspenite.h +5
-1@@ -11,6 +11,11 @@#define __CONFIG_ASPENITE_H/* +* Generic Board support +*/ +#define CONFIG_SYS_GENERIC_BOARD + +/* * Version number information */ #define CONFIG_IDENT_STRING "\nMarvell-Aspenite DB" --
Quoted 1 line
2.3.0
Added Luka on this thread.
Regards...
Prafulla . . .
PATCH 2/2 arm:aspenite: Convert to generic board
Quoted 30 lines · Prafulla Wadaskar
Quoted 26 lines
Subject: [PATCH 2/2] arm:aspenite: Convert to generic board
Enable
CONFIG_SYS_GENERIC_BOARDfor Marvell aspenite.Signed-off-by Ajay Bhargav <[email protected]>--- include/configs/aspenite.h | 5 +++++ 1 file changed, 5 insertions(+)include/configs/aspenite.h index renamed from include/configs/aspenite.h +0
-0727b14a..5258486 100644
include/configs/aspenite.h +5
-1@@ -11,6 +11,11 @@#define __CONFIG_ASPENITE_H/* +* Generic Board support +*/ +#define CONFIG_SYS_GENERIC_BOARD + +/* * Version number information */ #define CONFIG_IDENT_STRING "\nMarvell-Aspenite DB" --Quoted 1 line
2.3.0
Quoted 1 line
Added Luka on this thread.
Thank you. I've had issues applying this patch so I've merged it manually and pushed to Marvell's for-next branch.
Luka
PATCH 2/2 arm:aspenite: Convert to generic board
Quoted 37 lines · Luka Perkov
Quoted 36 lines · Prafulla Wadaskar
Quoted 29 lines
Subject: [PATCH 2/2] arm:aspenite: Convert to generic board
Enable
CONFIG_SYS_GENERIC_BOARDfor Marvell aspenite.Signed-off-by Ajay Bhargav <[email protected]>---
include/configs/aspenite.h | 5 +++++ 1 file changed, 5 insertions(+)include/configs/aspenite.h +5
-0@@ -11,6 +11,11 @@#define __CONFIG_ASPENITE_H/* +* Generic Board support +*/ +#define CONFIG_SYS_GENERIC_BOARD + +/* * Version number information
*/Quoted 4 lines
#define
CONFIG_IDENT_STRING"\nMarvell-Aspenite DB"--
2.3.0
Quoted 4 lines
Quoted 1 line
Added Luka on this thread.
Thank you. I've had issues applying this patch so I've merged it manually and pushed to Marvell's for-next branch.
Hi!
are you the marvell custodian now, Luka ? If so, please update
http://www.denx.de/wiki/U-Boot/Custodians this here, so it lists your contact :)
Thanks!
Best regards,
Marek Vasut
PATCH 1/2 arm:gplugd: Convert to generic board
In reply to Ajay BhargavQuoted 34 lines
-----Original Message-----
From: Ajay Bhargav [mailto:ajay.bhargav at einfochips.com]
Sent: 16 February 2015 18:37
To: u-boot at lists.denx.de; marex at denx.de
Cc: trini at ti.com; Prafulla Wadaskar; yamada.m at jp.panasonic.com; Ajay Bhargav
Subject: [PATCH 1/2] arm:gplugd: Convert to generic boardEnable
CONFIG_SYS_GENERIC_BOARDfor Marvell Gplugd.Signed-off-by Ajay Bhargav <[email protected]>--- include/configs/gplugd.h | 5 +++++ 1 file changed, 5 insertions(+)include/configs/gplugd.h index renamed from include/configs/gplugd.h +0
-0404c56a..0ac198d 100644
include/configs/gplugd.h +5
-1@@ -26,6 +26,11 @@#endif /* +* Generic board support +*/ +#define CONFIG_SYS_GENERIC_BOARD + +/* * Version number information */ #define CONFIG_IDENT_STRING "\nMarvell-gplugD" --
Quoted 1 line
2.3.0
Added Luka on this thread.
Regards...
Prafulla . . .
PATCH 1/2 arm:gplugd: Convert to generic board
Quoted 30 lines · Prafulla Wadaskar
Quoted 26 lines
Subject: [PATCH 1/2] arm:gplugd: Convert to generic board
Enable
CONFIG_SYS_GENERIC_BOARDfor Marvell Gplugd.Signed-off-by Ajay Bhargav <[email protected]>--- include/configs/gplugd.h | 5 +++++ 1 file changed, 5 insertions(+)include/configs/gplugd.h index renamed from include/configs/gplugd.h +0
-0404c56a..0ac198d 100644
include/configs/gplugd.h +5
-1@@ -26,6 +26,11 @@#endif /* +* Generic board support +*/ +#define CONFIG_SYS_GENERIC_BOARD + +/* * Version number information */ #define CONFIG_IDENT_STRING "\nMarvell-gplugD" --Quoted 1 line
2.3.0
Quoted 1 line
Added Luka on this thread.
Thank you. I've had issues applying this patch so I've merged it manually and pushed to Marvell's for-next branch.
Luka