Skip to contentSkip to conversation

please pull u-boot-samsung master

U-Boot Minkyu Kang 3 participants 4 messages Feb 13, 2015 – Feb 17, 2015

lore
Share & tools
lore
#0 lore raw

Dear Tom,

The following changes since commit bd2a4888b123713adec271d6c8040ca9f609aa2f:

sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART (2015-02-11 19:43:45 -0500)

are available in the git repository at:

http://git.denx.de/u-boot-samsung

for you to fetch changes up to 2e82e9252695a612ab0cbf40fa0c7368515f6506:

Exynos: Clock: Cleanup soc_get_periph_rate (2015-02-13 17:23:06 +0900)

----------------------------------------------------------------
Akshay Saraswat (7):
Exynos5: Fix compiler warnings due to clock_get_periph_rate
Exynos542x: Move exynos5420_get_pll_clk up and rename
Exynos542x: Add and enable get_periph_rate support
Exynos5: Fix exynos5_get_periph_rate calculations
Exynos5: Use clock_get_periph_rate generic API
Exynos: clock: change mask bits as per peripheral
Exynos: Clock: Cleanup soc_get_periph_rate

Jaehoon Chung (1):
arm: exynos: fix the div value for set_mmc_clk

Joonyoung Shim (5):
samsung: board: support eMMC reset using DT
Odroid: Add eMMC-reset node on DT
Odroid-XU3: Add eMMC-reset node on DT
odroid: fix g2d sclk rate
EXYNOS5: Add function to enable exynos5420 usbdev phy ctrl

 arch/arm/cpu/armv7/exynos/clock.c              |  621 ++++++++++++------------
 arch/arm/cpu/armv7/exynos/power.c              |   28 +-
 arch/arm/dts/exynos4412-odroid.dts             |    5 +
 arch/arm/dts/exynos5422-odroidxu3.dts          |    5 +
 arch/arm/include/asm/arch-exynos/clk.h         |    4 +
 board/samsung/common/board.c                   |   28 ++
 board/samsung/odroid/odroid.c                  |   12 +-
 doc/device-tree-bindings/exynos/emmc-reset.txt |   15 +
 8 files changed, 383 insertions(+), 335 deletions(-)
 create mode 100644 doc/device-tree-bindings/exynos/emmc-reset.txt
Signature · 2 lines
Thanks,
Minkyu Kang.
#1 lore raw

Hi Minkyu,

Quoted 27 lines · Minkyu Kang

Dear Tom,

The following changes since commit bd2a4888b123713adec271d6c8040ca9f609aa2f:

sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART (2015-02-11 19:43:45 -0500)

are available in the git repository at:

http://git.denx.de/u-boot-samsung

for you to fetch changes up to 2e82e9252695a612ab0cbf40fa0c7368515f6506:

Exynos: Clock: Cleanup soc_get_periph_rate (2015-02-13 17:23:06 +0900)

----------------------------------------------------------------
Akshay Saraswat (7):
Exynos5: Fix compiler warnings due to clock_get_periph_rate
Exynos542x: Move exynos5420_get_pll_clk up and rename
Exynos542x: Add and enable get_periph_rate support
Exynos5: Fix exynos5_get_periph_rate calculations
Exynos5: Use clock_get_periph_rate generic API
Exynos: clock: change mask bits as per peripheral
Exynos: Clock: Cleanup soc_get_periph_rate

Jaehoon Chung (1):
arm: exynos: fix the div value for set_mmc_clk

Quoted 6 lines

Joonyoung Shim (5):
samsung: board: support eMMC reset using DT
Odroid: Add eMMC-reset node on DT
Odroid-XU3: Add eMMC-reset node on DT
odroid: fix g2d sclk rate
EXYNOS5: Add function to enable exynos5420 usbdev phy ctrl

There are 6 patches here which I think are waiting on a new version:

https://patchwork.ozlabs.org/patch/418114/

I will ping that thread.

There are also 11 patches starting here:

https://patchwork.ozlabs.org/patch/435722/

What is the status of those?

Regards,
Simon

#2 lore raw

Dear Simon,

Quoted 37 lines · Simon Glass

Hi Minkyu,

Quoted 27 lines · Minkyu Kang

Dear Tom,

The following changes since commit bd2a4888b123713adec271d6c8040ca9f609aa2f:

sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART (2015-02-11 19:43:45 -0500)

are available in the git repository at:

http://git.denx.de/u-boot-samsung

for you to fetch changes up to 2e82e9252695a612ab0cbf40fa0c7368515f6506:

Exynos: Clock: Cleanup soc_get_periph_rate (2015-02-13 17:23:06 +0900)

----------------------------------------------------------------
Akshay Saraswat (7):
Exynos5: Fix compiler warnings due to clock_get_periph_rate
Exynos542x: Move exynos5420_get_pll_clk up and rename
Exynos542x: Add and enable get_periph_rate support
Exynos5: Fix exynos5_get_periph_rate calculations
Exynos5: Use clock_get_periph_rate generic API
Exynos: clock: change mask bits as per peripheral
Exynos: Clock: Cleanup soc_get_periph_rate

Jaehoon Chung (1):
arm: exynos: fix the div value for set_mmc_clk

Quoted 6 lines

Joonyoung Shim (5):
samsung: board: support eMMC reset using DT
Odroid: Add eMMC-reset node on DT
Odroid-XU3: Add eMMC-reset node on DT
odroid: fix g2d sclk rate
EXYNOS5: Add function to enable exynos5420 usbdev phy ctrl

Quoted 5 lines

There are 6 patches here which I think are waiting on a new version:

https://patchwork.ozlabs.org/patch/418114/

I will ping that thread.

I request new patchset, but I didn't get.
http://patchwork.ozlabs.org/patch/418116/

Quoted 6 lines

There are also 11 patches starting here:

https://patchwork.ozlabs.org/patch/435722/

What is the status of those?

missing.
I'll review them soon.

Thanks,
Minkyu Kang.

#3 lore raw
In reply to Minkyu Kang
Quoted 6 lines · Minkyu Kang

Dear Tom,

The following changes since commit bd2a4888b123713adec271d6c8040ca9f609aa2f:

sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART (2015-02-11 19:43:45 -0500)

Quoted 8 lines

are available in the git repository at:

http://git.denx.de/u-boot-samsung

for you to fetch changes up to 2e82e9252695a612ab0cbf40fa0c7368515f6506:

Exynos: Clock: Cleanup soc_get_periph_rate (2015-02-13 17:23:06 +0900)

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150216/008b5ea5/attachment.sig>