ARM: DRA7: DDR3: Update timings and leveling parameters
cover ARM: DRA7: DDR3: Update timings and leveling parameters
This series updates the DDR timing and leveling parameters on DRA7 and DRA72 EVM.
Angela Stegmaier (1):
ARM: DRA72x: DDR3: Fix EMIF timings for 666MHz clock
Lokesh Vutla (2):
ARM: DRA7: EMIF: Update SDRAM_REF_CTRL register value
ARM: DRA7-evm: DDR3: Update leveling values
arch/arm/cpu/armv7/omap-common/emif-common.c | 4 +- arch/arm/cpu/armv7/omap5/sdram.c | 83 ++++++++++++++-------------- arch/arm/include/asm/emif.h | 1 + board/ti/beagle_x15/board.c | 6 +- 4 files changed, 51 insertions(+), 43 deletions(-)
Signature · 1 line
1.9.1
PATCH 1/3 ARM: DRA72x: DDR3: Fix EMIF timings for 666MHz clock
From: Angela Stegmaier <[email protected]>
DDR3 timing and latency paramenters were not configured correctly for 666MHz. Fixing the timing and latency values according to Data sheet.
This fixes the random crashes seen on DRA72-evm.
--- arch/arm/cpu/armv7/omap5/sdram.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
arch/arm/cpu/armv7/omap5/sdram.c +8 -8
@@ -186,18 +186,18 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = { };const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = { - .sdram_config_init =0x61851AB2 , - .sdram_config =0x61851AB2 , + .sdram_config_init =0x61862B32 , + .sdram_config =0x61862B32 , .sdram_config2 =0x08000000 , - .ref_ctrl =0x00001035 , - .sdram_tim1 =0xCCCF36B3 , - .sdram_tim2 =0x308F7FDA , - .sdram_tim3 =0x027F88A8 , + .ref_ctrl =0x0000144A , + .sdram_tim1 =0xD113781C , + .sdram_tim2 =0x308F7FE3 , + .sdram_tim3 =0x009F86A8 , .read_idle_ctrl =0x00050000 , .zq_config =0x0007190B , .temp_alert_config =0x00000000 , - .emif_ddr_phy_ctlr_1_init =0x0024400A , - .emif_ddr_phy_ctlr_1 =0x0024400A , + .emif_ddr_phy_ctlr_1_init =0x0E24400D , + .emif_ddr_phy_ctlr_1 =0x0E24400D , .emif_ddr_ext_phy_ctrl_1 =0x10040100 , .emif_ddr_ext_phy_ctrl_2 =0x00A400A4 , .emif_ddr_ext_phy_ctrl_3 =0x00A900A9 ,
Signature · 1 line
1.9.1
PATCH 1/3 ARM: DRA72x: DDR3: Fix EMIF timings for 666MHz clock
Quoted 9 lines · Lokesh Vutla
From: Angela Stegmaier <[email protected]>
DDR3 timing and latency paramenters were not configured correctly for 666MHz. Fixing the timing and latency values according to Data sheet.
This fixes the random crashes seen on DRA72-evm.Signed-off-by Angela Stegmaier <[email protected]>Signed-off-by Lokesh Vutla <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150217/e7ddab29/attachment.sig>
PATCH 1/3 ARM: DRA72x: DDR3: Fix EMIF timings for 666MHz clock
In reply to Lokesh VutlaQuoted 9 lines · Lokesh Vutla
From: Angela Stegmaier <[email protected]>
DDR3 timing and latency paramenters were not configured correctly for 666MHz. Fixing the timing and latency values according to Data sheet.
This fixes the random crashes seen on DRA72-evm.Signed-off-by Angela Stegmaier <[email protected]>Signed-off-by Lokesh Vutla <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150217/fd7c3f09/attachment.sig>
PATCH 2/3 ARM: DRA7: EMIF: Update SDRAM_REF_CTRL register value
In reply to Lokesh VutlaThe value in SDRAM_REF_CTRL controls the delay time between the initial rising edge of DDR_RESETn to rising edge of DDR_CKE (JEDEC specs this as 500us). In order to achieve this, SDRAM_REF_CTRL should be written with a value corresponding to 500us delay before starting DDR initialization sequence, and configure proper value at the end of sequence.
--- arch/arm/cpu/armv7/omap-common/emif-common.c | 4 +++- arch/arm/cpu/armv7/omap5/sdram.c | 9 ++++++--- arch/arm/include/asm/emif.h | 1 + board/ti/beagle_x15/board.c | 6 ++++-- 4 files changed, 14 insertions(+), 6 deletions(-)
arch/arm/cpu/armv7/omap-common/emif-common.c +3 -1
@@ -252,6 +252,8 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) {struct emif_reg_struct *emif = (struct emif_reg_struct *)base; +writel (regs->ref_ctrl, &emif->emif_sdram_ref_ctrl); +writel (regs->sdram_config_init, &emif->emif_sdram_config);/* * Set SDRAM_CONFIG and PHY control registers to locked frequency * and RL =7. As the default values of the Mode Registers are not
@@ -265,7 +267,6 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)writel (regs->sdram_tim2, &emif->emif_sdram_tim_2);writel (regs->sdram_tim3, &emif->emif_sdram_tim_3); -writel (regs->ref_ctrl, &emif->emif_sdram_ref_ctrl);writel (regs->read_idle_ctrl, &emif->emif_read_idlectrl);/*
@@ -274,6 +275,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)*/ if (is_dra7xx ()) {do_ext_phy_settings (base, regs); +writel (regs->ref_ctrl_final, &emif->emif_sdram_ref_ctrl);writel (regs->sdram_config2, &emif->emif_lpddr2_nvm_config);writel (regs->sdram_config_init, &emif->emif_sdram_config); }else {
arch/arm/cpu/armv7/omap5/sdram.c +6 -3
@@ -141,7 +141,8 @@ const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = { .sdram_config_init = 0x61851ab2, .sdram_config = 0x61851ab2, .sdram_config2 = 0x08000000, - .ref_ctrl = 0x00001035, + .ref_ctrl = 0x000040F1, + .ref_ctrl_final = 0x00001035, .sdram_tim1 = 0xCCCF36B3, .sdram_tim2 = 0x308F7FDA, .sdram_tim3 = 0x027F88A8,
@@ -165,7 +166,8 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = { .sdram_config_init = 0x61851B32, .sdram_config = 0x61851B32, .sdram_config2 = 0x08000000, - .ref_ctrl = 0x00001035, + .ref_ctrl = 0x000040F1, + .ref_ctrl_final = 0x00001035, .sdram_tim1 = 0xCCCF36B3, .sdram_tim2 = 0x308F7FDA, .sdram_tim3 = 0x027F88A8,
@@ -189,7 +191,8 @@ const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = { .sdram_config_init = 0x61862B32, .sdram_config = 0x61862B32, .sdram_config2 = 0x08000000, - .ref_ctrl = 0x0000144A, + .ref_ctrl = 0x0000493E, + .ref_ctrl_final = 0x0000144A, .sdram_tim1 = 0xD113781C, .sdram_tim2 = 0x308F7FE3, .sdram_tim3 = 0x009F86A8,
arch/arm/include/asm/emif.h +1 -0
@@ -1122,6 +1122,7 @@ struct emif_regs {u32 sdram_config;u32 sdram_config2;u32 ref_ctrl; +u32 ref_ctrl_final;u32 sdram_tim1;u32 sdram_tim2;u32 sdram_tim3;
board/ti/beagle_x15/board.c +4 -2
@@ -47,7 +47,8 @@ static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = { .sdram_config_init = 0x61851b32, .sdram_config = 0x61851b32, .sdram_config2 = 0x00000000, - .ref_ctrl = 0x00001035, + .ref_ctrl = 0x000040F1, + .ref_ctrl_final = 0x00001035, .sdram_tim1 = 0xceef266b, .sdram_tim2 = 0x328f7fda, .sdram_tim3 = 0x027f88a8,
@@ -103,7 +104,8 @@ static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = { .sdram_config_init = 0x61851b32, .sdram_config = 0x61851b32, .sdram_config2 = 0x00000000, - .ref_ctrl = 0x00001035, + .ref_ctrl = 0x000040F1, + .ref_ctrl_final = 0x00001035, .sdram_tim1 = 0xceef266b, .sdram_tim2 = 0x328f7fda, .sdram_tim3 = 0x027f88a8,
Signature · 1 line
1.9.1
PATCH 2/3 ARM: DRA7: EMIF: Update SDRAM_REF_CTRL register value
Quoted 8 lines · Lokesh Vutla
The value in
SDRAM_REF_CTRLcontrols the delay time between the initial rising edge ofDDR_RESETnto rising edge ofDDR_CKE(JEDEC specs this as 500us). In order to achieve this,SDRAM_REF_CTRLshould be written with a value corresponding to 500us delay before starting DDR initialization sequence, and configure proper value at the end of sequence.Signed-off-by Lokesh Vutla <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150217/6550ad74/attachment.sig>
PATCH 3/3 ARM: DRA7-evm: DDR3: Update leveling values
In reply to Lokesh VutlaUpdate the software leveling parameters.
This fixes the random crash seen on DRA7-evm.
--- arch/arm/cpu/armv7/omap5/sdram.c | 60 ++++++++++++++++++++-------------------- 1 file changed, 30 insertions(+), 30 deletions(-)
arch/arm/cpu/armv7/omap5/sdram.c +30 -30
@@ -152,10 +152,10 @@ const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = { .emif_ddr_phy_ctlr_1_init = 0x0E24400A, .emif_ddr_phy_ctlr_1 = 0x0E24400A, .emif_ddr_ext_phy_ctrl_1 = 0x10040100, - .emif_ddr_ext_phy_ctrl_2 = 0x00BB00BB, - .emif_ddr_ext_phy_ctrl_3 = 0x00BB00BB, - .emif_ddr_ext_phy_ctrl_4 = 0x00BB00BB, - .emif_ddr_ext_phy_ctrl_5 = 0x00BB00BB, + .emif_ddr_ext_phy_ctrl_2 = 0x00910091, + .emif_ddr_ext_phy_ctrl_3 = 0x00950095, + .emif_ddr_ext_phy_ctrl_4 = 0x009B009B, + .emif_ddr_ext_phy_ctrl_5 = 0x009E009E, .emif_rd_wr_lvl_rmp_win = 0x00000000, .emif_rd_wr_lvl_rmp_ctl = 0x00000000, .emif_rd_wr_lvl_ctl = 0x00000000,
@@ -177,10 +177,10 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = { .emif_ddr_phy_ctlr_1_init = 0x0E24400A, .emif_ddr_phy_ctlr_1 = 0x0E24400A, .emif_ddr_ext_phy_ctrl_1 = 0x10040100, - .emif_ddr_ext_phy_ctrl_2 = 0x00BB00BB, - .emif_ddr_ext_phy_ctrl_3 = 0x00BB00BB, - .emif_ddr_ext_phy_ctrl_4 = 0x00BB00BB, - .emif_ddr_ext_phy_ctrl_5 = 0x00BB00BB, + .emif_ddr_ext_phy_ctrl_2 = 0x00910091, + .emif_ddr_ext_phy_ctrl_3 = 0x00950095, + .emif_ddr_ext_phy_ctrl_4 = 0x009B009B, + .emif_ddr_ext_phy_ctrl_5 = 0x009E009E, .emif_rd_wr_lvl_rmp_win = 0x00000000, .emif_rd_wr_lvl_rmp_ctl = 0x00000000, .emif_rd_wr_lvl_ctl = 0x00000000,
@@ -423,22 +423,22 @@ const u32 ddr3_ext_phy_ctrl_const_base_es2[] = {const u32 dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = { -0x00BB00BB , -0x00440044 , -0x00440044 , -0x00440044 , -0x00440044 , -0x00440044 , +0x00980098 , +0x00340034 , +0x00350035 , +0x00340034 , +0x00310031 , +0x00340034 ,0x007F007F ,0x007F007F ,0x007F007F ,0x007F007F ,0x007F007F , -0x00600060 , -0x00600060 , -0x00600060 , -0x00600060 , -0x00600060 , +0x00480048 , +0x004A004A , +0x00520052 , +0x00550055 , +0x00500050 ,0x00000000 ,0x00600020 ,0x40010080 ,
@@ -452,22 +452,22 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = {const u32 dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = { -0x00BB00BB , -0x00440044 , -0x00440044 , -0x00440044 , -0x00440044 , -0x00440044 , +0x00980098 , +0x00330033 , +0x00330033 , +0x002F002F , +0x00320032 , +0x00310031 ,0x007F007F ,0x007F007F ,0x007F007F ,0x007F007F ,0x007F007F , -0x00600060 , -0x00600060 , -0x00600060 , -0x00600060 , -0x00600060 , +0x00520052 , +0x00520052 , +0x00470047 , +0x00490049 , +0x00500050 ,0x00000000 ,0x00600020 ,0x40010080 ,
Signature · 1 line
1.9.1
PATCH 3/3 ARM: DRA7-evm: DDR3: Update leveling values
Quoted 4 lines · Lokesh Vutla
Update the software leveling parameters.
This fixes the random crash seen on DRA7-evm.Signed-off-by Lokesh Vutla <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150217/41ebbd9f/attachment.sig>