Skip to contentSkip to conversation

Mygica T230 DVB-T/T2/C Ubuntu 14.04 (kernel 3.13.0-45) using media_build

DISCUSSION Gert-Jan van der Stroom 4 participants 7 messages Feb 22, 2015 – Feb 26, 2015 2 messages not in the archive Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Can someone help me to get a Mygica T230 DVB-T/T2/C working on Ubuntu 14.04 (kernel 3.13.0-45) using media_build.
I succeed doing a build of the media_build, the drivers also load when I attach the Mygica, but when I try to use it (tvheadend) it crashes:

[   61.592114] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[   61.828138] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[   61.828279] DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
[   61.847369] i2c i2c-7: Added multiplexed i2c bus 8
[   61.847372] si2168 7-0064: Silicon Labs Si2168 successfully attached
[   61.857024] si2157 8-0060: Silicon Labs Si2147/2148/2157/2158
successfully attached
[   61.857034] usb 1-5: DVB: registering adapter 0 frontend 0 (Silicon Labs
Si2168)...
[   61.857488] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.7/usb1/1-5/input/input11
[   61.857541] dvb-usb: schedule remote query interval to 100 msecs.
[   61.857709] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and
connected.
[   61.857773] usbcore: registered new interface driver dvb_usb_cxusb

Tvheadend start:

[  314.356162] BUG: unable to handle kernel NULL pointer dereference at
0000000000000010
[  314.356202] IP: [<ffffffffa02ef74c>]
media_entity_pipeline_start+0x1c/0x390 [media]
[  314.356236] PGD 76c6c067 PUD 766b0067 PMD 0
[  314.356260] Oops: 0000 [#1] SMP
[  314.356279] Modules linked in: si2157(OX) si2168(OX) i2c_mux

dvb_usb_cxusb(OX) dib0070(OX) dvb_usb(OX) dvb_core(OX) rc_core(OX) media(OX) snd_hda_codec_analog gpio_ich hp_wmi sparse_keymap coretemp kvm_intel kvm serio_raw snd_hda_intel i915 lpc_ich snd_hda_codec shpchp drm_kms_helper snd_hwdep snd_pcm snd_page_alloc snd_timer pl2303 video wmi tpm_infineon drm mac_hid mei_me snd soundcore i2c_algo_bit usbserial mei lp parport psmouse e1000e floppy ptp pps_core pata_acpi

[  314.356541] CPU: 1 PID: 1053 Comm: kdvb-ad-0-fe-0 Tainted: G        W  OX

3.13.0-45-generic #74-Ubuntu

What is wrong, or do I miss something ?
I also added the firmware described at:
http://www.linuxtv.org/wiki/index.php/Geniatech_T230

#1 lore raw

Mauro,
could you fix your media controller stuff ASAP as I think almost all DVB devices are currently broken. I have got multiple bug reports....

Quoted 22 lines · Gert-Jan van der Stroom

Can someone help me to get a Mygica T230 DVB-T/T2/C working on Ubuntu 14.04 (kernel 3.13.0-45) using media_build.
I succeed doing a build of the media_build, the drivers also load when I attach the Mygica, but when I try to use it (tvheadend) it crashes:

[   61.592114] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[   61.828138] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[   61.828279] DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
[   61.847369] i2c i2c-7: Added multiplexed i2c bus 8
[   61.847372] si2168 7-0064: Silicon Labs Si2168 successfully attached
[   61.857024] si2157 8-0060: Silicon Labs Si2147/2148/2157/2158
successfully attached
[   61.857034] usb 1-5: DVB: registering adapter 0 frontend 0 (Silicon Labs
Si2168)...
[   61.857488] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.7/usb1/1-5/input/input11
[   61.857541] dvb-usb: schedule remote query interval to 100 msecs.
[   61.857709] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and
connected.
[   61.857773] usbcore: registered new interface driver dvb_usb_cxusb
Quoted 5 lines

Tvheadend start:

[  314.356162] BUG: unable to handle kernel NULL pointer dereference at
0000000000000010
[  314.356202] IP: [<ffffffffa02ef74c>]

media_entity_pipeline_start+0x1c/0x390 [media]

^^^^^^^^^^^^ problem is that I think

Quoted 9 lines
[  314.356236] PGD 76c6c067 PUD 766b0067 PMD 0
[  314.356260] Oops: 0000 [#1] SMP
[  314.356279] Modules linked in: si2157(OX) si2168(OX) i2c_mux

dvb_usb_cxusb(OX) dib0070(OX) dvb_usb(OX) dvb_core(OX) rc_core(OX) media(OX) snd_hda_codec_analog gpio_ich hp_wmi sparse_keymap coretemp kvm_intel kvm serio_raw snd_hda_intel i915 lpc_ich snd_hda_codec shpchp drm_kms_helper snd_hwdep snd_pcm snd_page_alloc snd_timer pl2303 video wmi tpm_infineon drm mac_hid mei_me snd soundcore i2c_algo_bit usbserial mei lp parport psmouse e1000e floppy ptp pps_core pata_acpi

Quoted 6 lines
[  314.356541] CPU: 1 PID: 1053 Comm: kdvb-ad-0-fe-0 Tainted: G        W  OX

3.13.0-45-generic #74-Ubuntu

What is wrong, or do I miss something ?
I also added the firmware described at:
http://www.linuxtv.org/wiki/index.php/Geniatech_T230

regards
Antti

Signature · 1 line
http://palosaari.fi/
#2 lore raw

Em Sun, 22 Feb 2015 23:35:52 +0200
Antti Palosaari <[email protected]> escreveu:

Quoted 3 lines

Mauro,
could you fix your media controller stuff ASAP as I think almost all DVB devices are currently broken. I have got multiple bug reports....

That looks weird... I think the patch adding media controller support for the dvb-usb was not merged yet.

Quoted 24 lines · Gert-Jan van der Stroom
Quoted 22 lines

Can someone help me to get a Mygica T230 DVB-T/T2/C working on Ubuntu 14.04 (kernel 3.13.0-45) using media_build.
I succeed doing a build of the media_build, the drivers also load when I attach the Mygica, but when I try to use it (tvheadend) it crashes:

[   61.592114] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[   61.828138] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[   61.828279] DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
[   61.847369] i2c i2c-7: Added multiplexed i2c bus 8
[   61.847372] si2168 7-0064: Silicon Labs Si2168 successfully attached
[   61.857024] si2157 8-0060: Silicon Labs Si2147/2148/2157/2158
successfully attached
[   61.857034] usb 1-5: DVB: registering adapter 0 frontend 0 (Silicon Labs
Si2168)...
[   61.857488] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.7/usb1/1-5/input/input11
[   61.857541] dvb-usb: schedule remote query interval to 100 msecs.
[   61.857709] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and
connected.
[   61.857773] usbcore: registered new interface driver dvb_usb_cxusb
Quoted 21 lines
Quoted 5 lines

Tvheadend start:

[  314.356162] BUG: unable to handle kernel NULL pointer dereference at
0000000000000010
[  314.356202] IP: [<ffffffffa02ef74c>]

media_entity_pipeline_start+0x1c/0x390 [media]

^^^^^^^^^^^^ problem is that I think

Quoted 11 lines
[  314.356236] PGD 76c6c067 PUD 766b0067 PMD 0
[  314.356260] Oops: 0000 [#1] SMP
[  314.356279] Modules linked in: si2157(OX) si2168(OX) i2c_mux

dvb_usb_cxusb(OX) dib0070(OX) dvb_usb(OX) dvb_core(OX) rc_core(OX) media(OX) snd_hda_codec_analog gpio_ich hp_wmi sparse_keymap coretemp kvm_intel kvm serio_raw snd_hda_intel i915 lpc_ich snd_hda_codec shpchp drm_kms_helper snd_hwdep snd_pcm snd_page_alloc snd_timer pl2303 video wmi tpm_infineon drm mac_hid mei_me snd soundcore i2c_algo_bit usbserial mei lp parport psmouse e1000e floppy ptp pps_core pata_acpi

[  314.356541] CPU: 1 PID: 1053 Comm: kdvb-ad-0-fe-0 Tainted: G        W  OX

3.13.0-45-generic #74-Ubuntu

Gert-Jan,

Could you please post the stack dump? It would help to know what's calling media_entity_pipeline_start.

Regards,
Mauro

Quoted 8 lines
Quoted 4 lines

What is wrong, or do I miss something ?
I also added the firmware described at:
http://www.linuxtv.org/wiki/index.php/Geniatech_T230

regards
Antti

#3 lore raw
Quoted 9 lines · Mauro Carvalho Chehab

Em Sun, 22 Feb 2015 23:35:52 +0200
Antti Palosaari <[email protected]> escreveu:

Quoted 3 lines

Mauro,
could you fix your media controller stuff ASAP as I think almost all DVB devices are currently broken. I have got multiple bug reports....

That looks weird... I think the patch adding media controller support for the dvb-usb was not merged yet.

hmm, OK. But I have got at least one such report for rtl28xxu driver on my mail and there is another report on my blog, which is likely same, though there was no log, only report saying it crash when latest media build used.

Quoted 61 lines
Quoted 23 lines · Gert-Jan van der Stroom
Quoted 22 lines

Can someone help me to get a Mygica T230 DVB-T/T2/C working on Ubuntu 14.04 (kernel 3.13.0-45) using media_build.
I succeed doing a build of the media_build, the drivers also load when I attach the Mygica, but when I try to use it (tvheadend) it crashes:

[   61.592114] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[   61.828138] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[   61.828279] DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
[   61.847369] i2c i2c-7: Added multiplexed i2c bus 8
[   61.847372] si2168 7-0064: Silicon Labs Si2168 successfully attached
[   61.857024] si2157 8-0060: Silicon Labs Si2147/2148/2157/2158
successfully attached
[   61.857034] usb 1-5: DVB: registering adapter 0 frontend 0 (Silicon Labs
Si2168)...
[   61.857488] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.7/usb1/1-5/input/input11
[   61.857541] dvb-usb: schedule remote query interval to 100 msecs.
[   61.857709] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and
connected.
[   61.857773] usbcore: registered new interface driver dvb_usb_cxusb
Quoted 21 lines
Quoted 5 lines

Tvheadend start:

[  314.356162] BUG: unable to handle kernel NULL pointer dereference at
0000000000000010
[  314.356202] IP: [<ffffffffa02ef74c>]

media_entity_pipeline_start+0x1c/0x390 [media]

^^^^^^^^^^^^ problem is that I think

Quoted 11 lines
[  314.356236] PGD 76c6c067 PUD 766b0067 PMD 0
[  314.356260] Oops: 0000 [#1] SMP
[  314.356279] Modules linked in: si2157(OX) si2168(OX) i2c_mux

dvb_usb_cxusb(OX) dib0070(OX) dvb_usb(OX) dvb_core(OX) rc_core(OX) media(OX) snd_hda_codec_analog gpio_ich hp_wmi sparse_keymap coretemp kvm_intel kvm serio_raw snd_hda_intel i915 lpc_ich snd_hda_codec shpchp drm_kms_helper snd_hwdep snd_pcm snd_page_alloc snd_timer pl2303 video wmi tpm_infineon drm mac_hid mei_me snd soundcore i2c_algo_bit usbserial mei lp parport psmouse e1000e floppy ptp pps_core pata_acpi

[  314.356541] CPU: 1 PID: 1053 Comm: kdvb-ad-0-fe-0 Tainted: G        W  OX

3.13.0-45-generic #74-Ubuntu

Gert-Jan,

Could you please post the stack dump? It would help to know what's calling media_entity_pipeline_start.

Regards,
Mauro

Quoted 8 lines
Quoted 4 lines

What is wrong, or do I miss something ?
I also added the firmware described at:
http://www.linuxtv.org/wiki/index.php/Geniatech_T230

regards
Antti

Signature · 1 line
http://palosaari.fi/
#4 lore raw
In reply to Mauro Carvalho Chehab

I saw this too, while working with Antti on adding support for another rtl2832-based DVB card.

The kernel version

[    0.000000] Linux version 3.13.0-45-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:37:48 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)

This is what dmesg contained:

[  247.897962] BUG: unable to handle kernel NULL pointer dereference at 00000008
[  247.897971] IP: [<f84f62f4>] media_entity_pipeline_start+0x24/0x350 [media]
[  247.897982] *pdpt = 000000001c70f001 *pde = 0000000000000000
[  247.897988] Oops: 0000 [#1] SMP
[  247.897992] Modules linked in: gpio_ich nvidia(POX) snd_hda_codec_hdmi bnep ir_lirc_codec(OX) rfcomm ir_xmp_decoder(OX) lirc_dev(OX) ir_sony_decoder(OX) ir_sharp_decoder(OX) ir_sanyo_decoder(OX) ir_rc6_decoder(OX) ir_rc5_decoder(OX) ir_nec_decoder(OX) ir_mce_kbd_decoder(OX) ir_jvc_decoder(OX) bluetooth rtl2832_sdr(OX) videobuf2_vmalloc(OX) snd_hda_intel videobuf2_memops(OX) snd_intel8x0 snd_ac97_codec snd_hda_codec videobuf2_core(OX) ac97_bus snd_hwdep v4l2_common(OX) snd_pcm videodev(OX) snd_page_alloc fc0013(OX) snd_seq_midi snd_seq_midi_event rtl2832(OX) snd_rawmidi i2c_mux snd_seq dvb_usb_rtl28xxu(OX) dvb_usb_v2(OX) dvb_core(OX) rc_core(OX) snd_seq_device media(OX) snd_timer dcdbas snd serio_raw drm soundcore lpc_ich shpchp ppdev parport_pc lp mac_hid parport hid_generic tg3 usbhid psmouse ptp e1000 pps_core pata_acpi floppy hid
[  247.898043] CPU: 0 PID: 2967 Comm: kdvb-ad-0-fe-0 Tainted: POX 3.13.0-45-generic #74-Ubuntu
[  247.898046] Hardware name: Dell Inc.                 OptiPlex GX280/0DG476, BIOS A07 11/29/2005
[  247.898049] task: e5e9db00 ti: dbb80000 task.ti: dbb80000
[  247.898052] EIP: 0060:[<f84f62f4>] EFLAGS: 00010286 CPU: 0
[  247.898058] EIP is at media_entity_pipeline_start+0x24/0x350 [media]
[  247.898061] EAX: 00000000 EBX: e0b26280 ECX: f7b8a580 EDX: f6aac614
[  247.898063] ESI: f6aac400 EDI: 00000000 EBP: dbb81f08 ESP: dbb81e30
[  247.898066]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[  247.898069] CR0: 8005003b CR2: 00000008 CR3: 1c70e000 CR4: 000007f0
[  247.898072] Stack:
[  247.898074]  f7b8a5c8 00000001 00000006 00000000 b7de1fcc 00000039 00000000 00000001
[  247.898081]  00000000 f7b8a5c8 00000001 00000000 dbb81eb4 c1089ef6 dbb81eb8 c108c7c9
[  247.898086]  00000000 f7b8a580 f7b8a5c8 f7b8a580 f261ea00 e5e9db00 dbb81eac c108a44a
[  247.898093] Call Trace:
[  247.898102]  [<c1089ef6>] ? dequeue_task_fair+0x416/0x7c0
[  247.898106]  [<c108c7c9>] ? enqueue_task_fair+0x5d9/0x7e0
[  247.898110]  [<c108a44a>] ? check_preempt_wakeup+0x1aa/0x250
[  247.898115]  [<c1087b21>] ? set_next_entity+0xb1/0xe0
[  247.898120]  [<c100ed20>] ? __switch_to+0xb0/0x340
[  247.898126]  [<c1658fc8>] ? __schedule+0x358/0x770
[  247.898130]  [<c1082c60>] ? try_to_wake_up+0x150/0x240
[  247.898143]  [<f8763121>] dvb_frontend_thread+0x331/0x9a0 [dvb_core]
[  247.898154]  [<f8763121>] ? dvb_frontend_thread+0x331/0x9a0 [dvb_core]
[  247.898158]  [<c1082dc0>] ? default_wake_function+0x10/0x20
[  247.898162]  [<c1090f57>] ? __wake_up_common+0x47/0x70
[  247.898166]  [<c1090f9f>] ? __wake_up_locked+0x1f/0x30
[  247.898177]  [<f8762df0>] ? dvb_frontend_ioctl_legacy.isra.8+0xc20/0xc20 [dvb_core]
[  247.898182]  [<c10751d1>] kthread+0xa1/0xc0
[  247.898187]  [<c1663b37>] ret_from_kernel_thread+0x1b/0x28
[  247.898191]  [<c1075130>] ? kthread_create_on_node+0x140/0x140
[  247.898193] Code: 90 90 90 90 90 90 90 57 8d 7c 24 08 83 e4 f8 ff 77 fc 55 89 e5 57 56 53 81 ec cc 00 00 00 3e 8d 74 26 00 89 c7 89 85 48 ff ff ff <8b> 40 08 89 95 50 ff ff ff 89 85 60 ff ff ff 05 44 02 00
00 89
[  247.898229] EIP: [<f84f62f4>] media_entity_pipeline_start+0x24/0x350 [media] SS:ESP 0068:dbb81e30
[  247.898236] CR2: 0000000000000008
[  247.898241] ---[ end trace 800df23615d3c02a ]---

The git commit for the media_build tree at the time I compiled everything was

commit c40e87b410c9ed170e2ae6ca2aeef06a44621b20
Add writel_relaxed supportHEADmaster

HTH
Vince

A message that is not in the archive (sent off-list or not yet received): 1278760656379117910@unknownmsgid

#6 lore raw
Quoted 3 lines · Vincent McIntyre

I saw this too, while working with Antti on adding support for another rtl* device.

I should add how I triggered this
- build --main-git, make install, halt
- cold-boot, check modules loaded ok, check /dev/dvb/adapter* exist
- try to tune with dvb-apps 'scan' and adapter0/tuner0. This is where
the oops occurred.

Vince

A message that is not in the archive (sent off-list or not yet received): [email protected]

#8 lore raw
Quoted 32 lines

-----Original Message-----
From: Gert-Jan van der Stroom [mailto:[email protected]]
Sent: maandag 23 februari 2015 17:43
To: [email protected]
Cc: 'Mauro Carvalho Chehab'
Subject: RE: Mygica T230 DVB-T/T2/C Ubuntu 14.04 (kernel 3.13.0-45) using media_build

Quoted 11 lines

-----Original Message-----
From: Mauro Carvalho Chehab [mailto:[email protected]]
Sent: zondag 22 februari 2015 22:55
To: Antti Palosaari
Cc: Gert-Jan van der Stroom; [email protected]
Subject: Re: Mygica T230 DVB-T/T2/C Ubuntu 14.04 (kernel 3.13.0-45) using media_build

Em Sun, 22 Feb 2015 23:35:52 +0200
Antti Palosaari <[email protected]> escreveu:

Quoted 6 lines
Quoted 3 lines

Mauro,
could you fix your media controller stuff ASAP as I think almost all DVB devices are currently broken. I have got multiple bug reports....

That looks weird... I think the patch adding media controller support for

the

Quoted 4 lines

dvb-usb was not merged yet.

Quoted 2 lines · Gert-Jan van der Stroom
Quoted 9 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Can someone help me to get a Mygica T230 DVB-T/T2/C working on Ubuntu 14.04 (kernel 3.13.0-45) using media_build.
I succeed doing a build of the media_build, the drivers also load when I attach the Mygica, but when I try to use it (tvheadend) it

crashes:

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[   61.592114] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm

state.

Quoted 1 line
Quoted 1 line
Quoted 1 line
[   61.828138] dvb-usb: will pass the complete MPEG2 transport

stream

Quoted 10 lines

to

Quoted 5 lines

the

Quoted 4 lines
Quoted 4 lines

software demuxer.

[   61.828279] DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
[   61.847369] i2c i2c-7: Added multiplexed i2c bus 8
[   61.847372] si2168 7-0064: Silicon Labs Si2168 successfully

attached

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
[   61.857024] si2157 8-0060: Silicon Labs Si2147/2148/2157/2158
successfully attached
[   61.857034] usb 1-5: DVB: registering adapter 0 frontend 0

(Silicon

Quoted 10 lines

Labs

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

Si2168)...

[   61.857488] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.7/usb1/1-5/input/input11
[   61.857541] dvb-usb: schedule remote query interval to 100 msecs.
[   61.857709] dvb-usb: Mygica T230 DVB-T/T2/C successfully

initialized

Quoted 3 lines

and

Quoted 2 lines
Quoted 2 lines

connected.

[   61.857773] usbcore: registered new interface driver

dvb_usb_cxusb

Quoted 42 lines
Quoted 9 lines
Quoted 9 lines
Quoted 7 lines

Tvheadend start:

[  314.356162] BUG: unable to handle kernel NULL pointer
dereference at
0000000000000010
[  314.356202] IP: [<ffffffffa02ef74c>]

media_entity_pipeline_start+0x1c/0x390 [media]

Quoted 4 lines
Quoted 4 lines

^^^^^^^^^^^^ problem is that I think

Quoted 1 line
[  314.356236] PGD 76c6c067 PUD 766b0067 PMD 0 [  314.356260]

Oops:

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

0000 [#1] SMP [ 314.356279] Modules linked in: si2157(OX) si2168(OX) i2c_mux
dvb_usb_cxusb(OX) dib0070(OX) dvb_usb(OX) dvb_core(OX) rc_core(OX) media(OX) snd_hda_codec_analog gpio_ich hp_wmi sparse_keymap coretemp kvm_intel kvm serio_raw snd_hda_intel i915 lpc_ich snd_hda_codec shpchp drm_kms_helper snd_hwdep snd_pcm

Quoted 6 lines

snd_page_alloc

Quoted 3 lines
Quoted 3 lines

snd_timer pl2303 video wmi tpm_infineon drm mac_hid mei_me snd soundcore i2c_algo_bit usbserial mei lp parport psmouse e1000e floppy

ptp pps_core pata_acpi

Quoted 1 line
Quoted 1 line
[  314.356541] CPU: 1 PID: 1053 Comm: kdvb-ad-0-fe-0 Tainted: G

W

Quoted 11 lines

OX

Quoted 1 line
Quoted 1 line

3.13.0-45-generic #74-Ubuntu

Gert-Jan,

Could you please post the stack dump? It would help to know what's calling media_entity_pipeline_start.

Regards,
Mauro

[Gert-Jan van der Stroom]

Here's the complete dmesg:

Quoted 9 lines
[   61.356038] usb 1-5: new high-speed USB device number 5 using ehci-pci
[   61.488897] usb 1-5: New USB device found, idVendor=0572,
idProduct=c688
[   61.488901] usb 1-5: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[   61.488904] usb 1-5: Product: USB Stick
[   61.488906] usb 1-5: Manufacturer: Max
[   61.488908] usb 1-5: SerialNumber: 080116
[   61.541984] media: module verification failed: signature and/or

required

Quoted 36 lines

key missing - tainting kernel

[   61.542468] media: Linux media interface: v0.10
[   61.546376] WARNING: You are using an experimental version of the
media
stack.
[   61.546376]  As the driver is backported to an older kernel, it doesn't
offer
[   61.546376]  enough quality for its usage in production.
[   61.546376]  Use it with care.
[   61.546376] Latest git patches (needed if you report a bug to
[email protected]):
[   61.546376]  135f9be9194cf7778eb73594aa55791b229cf27c [media]
dvb_frontend: start media pipeline while thread is running
[   61.546376]  0f0fa90bd035fa15106799b813d4f0315d99f47e [media]
cx231xx:
enable tuner->decoder link at videobuf start
[   61.546376]  9239effd53d47e3cd9c653830c8465c0a3a427dc [media]
dvb-frontend: enable tuner link when the FE thread starts
[   61.564631] WARNING: You are using an experimental version of the
media
stack.
[   61.564631]  As the driver is backported to an older kernel, it doesn't
offer
[   61.564631]  enough quality for its usage in production.
[   61.564631]  Use it with care.
[   61.564631] Latest git patches (needed if you report a bug to
[email protected]):
[   61.564631]  135f9be9194cf7778eb73594aa55791b229cf27c [media]
dvb_frontend: start media pipeline while thread is running
[   61.564631]  0f0fa90bd035fa15106799b813d4f0315d99f47e [media]
cx231xx:
enable tuner->decoder link at videobuf start
[   61.564631]  9239effd53d47e3cd9c653830c8465c0a3a427dc [media]
dvb-frontend: enable tuner link when the FE thread starts
[   61.592114] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[   61.828138] dvb-usb: will pass the complete MPEG2 transport stream to
Quoted 8 lines

the
software demuxer.

[   61.828279] DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
[   61.847369] i2c i2c-7: Added multiplexed i2c bus 8
[   61.847372] si2168 7-0064: Silicon Labs Si2168 successfully attached
[   61.857024] si2157 8-0060: Silicon Labs Si2147/2148/2157/2158
successfully attached
[   61.857034] usb 1-5: DVB: registering adapter 0 frontend 0 (Silicon

Labs

Quoted 5 lines

Si2168)...

[   61.857488] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.7/usb1/1-5/input/input11
[   61.857541] dvb-usb: schedule remote query interval to 100 msecs.
[   61.857709] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized

and

Quoted 15 lines

connected.

[   61.857773] usbcore: registered new interface driver dvb_usb_cxusb
[  314.356162] BUG: unable to handle kernel NULL pointer dereference at
0000000000000010
[  314.356202] IP: [<ffffffffa02ef74c>]

media_entity_pipeline_start+0x1c/0x390 [media] [ 314.356236] PGD 76c6c067 PUD 766b0067 PMD 0 [ 314.356260] Oops: 0000 [#1] SMP [ 314.356279] Modules linked in: si2157(OX) si2168(OX) i2c_mux dvb_usb_cxusb(OX) dib0070(OX) dvb_usb(OX) dvb_core(OX) rc_core(OX) media(OX) snd_hda_codec_analog gpio_ich hp_wmi sparse_keymap coretemp kvm_intel kvm serio_raw snd_hda_intel i915 lpc_ich snd_hda_codec shpchp drm_kms_helper snd_hwdep snd_pcm snd_page_alloc snd_timer pl2303 video wmi tpm_infineon drm mac_hid mei_me snd soundcore i2c_algo_bit usbserial mei lp parport psmouse e1000e floppy ptp pps_core pata_acpi

Quoted 1 line
[  314.356541] CPU: 1 PID: 1053 Comm: kdvb-ad-0-fe-0 Tainted: G        W

OX

Quoted 41 lines

3.13.0-45-generic #74-Ubuntu

[  314.356574] Hardware name: Hewlett-Packard HP Compaq dc7900 Ultra-
Slim Desktop/3033h, BIOS 786G1 v01.26 07/12/2011 [  314.356609] task:
ffff880036cd4800 ti: ffff880075f7a000 task.ti:
ffff880075f7a000
[  314.356635] RIP: 0010:[<ffffffffa02ef74c>]  [<ffffffffa02ef74c>]

media_entity_pipeline_start+0x1c/0x390 [media] [ 314.356673] RSP:
0018:ffff880075f7bcd0 EFLAGS: 00010282 [ 314.356693] RAX:
0000000000000000 RBX: 0000000000000000 RCX:
0000000000000000

[  314.356717] RDX: 0000000000000000 RSI: ffff88007495a264 RDI:
0000000000000000
[  314.356743] RBP: ffff880075f7be40 R08: ffff880075f7a000 R09:
ffff88007495a000
[  314.356767] R10: 00000000000001d1 R11: 0000000000000204 R12:
ffff880076736830
[  314.356792] R13: ffff880076736830 R14: 0000000000000000 R15:
ffff88007495a000
[  314.356817] FS:  0000000000000000(0000) GS:ffff88007b680000(0000)
knlGS:0000000000000000
[  314.356845] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b [
314.356866] CR2: 0000000000000010 CR3: 000000007672f000 CR4:
00000000000407e0
[  314.356891] Stack:
[  314.356901]  ffff880075e14800 ffff88007b613540 ffff880075e14800
ffff880075f7bcf8
[  314.356936]  ffffffff8109edc8 ffff880075f7bd40 ffffffff810a515d
ffff880075f7bd18
[  314.356971]  ffffffff8101bc23 ffff880075e14800 ffff88007b613540
ffff88007b6134c0
[  314.357006] Call Trace:
[  314.357021]  [<ffffffff8109edc8>] ? __enqueue_entity+0x78/0x80 [
314.357043]  [<ffffffff810a515d>] ? enqueue_entity+0x2ad/0xbb0 [
314.357066]  [<ffffffff8101bc23>] ? native_sched_clock+0x13/0x80 [
314.358166]  [<ffffffff810a2f54>] ? update_curr+0xe4/0x180 [  314.359255]

[<ffffffff810a3442>] ? dequeue_entity+0x142/0x5c0 [ 314.360146] [<ffffffff810981c5>] ? check_preempt_curr+0x75/0xa0 [ 314.360146] [<ffffffff8101bc23>] ? native_sched_clock+0x13/0x80 [ 314.360146] [<ffffffff810a3d0e>] ? dequeue_task_fair+0x44e/0x660 [ 314.360146] [<ffffffff8109d4e8>] ? sched_clock_cpu+0xa8/0x100 [ 314.360146] [<ffffffff810125c6>] ? __switch_to+0x126/0x4c0 [ 314.360146]

Quoted 5 lines
[<ffffffffa037649b>] dvb_frontend_thread+0x33b/0x970 [dvb_core] [
314.360146]  [<ffffffff81724e61>] ? __schedule+0x381/0x7d0 [  314.360146]
[<ffffffffa0376160>] ?
dvb_frontend_ioctl_legacy.isra.8+0xce0/0xce0 [dvb_core] [  314.360146]
[<ffffffff8108b572>] kthread+0xd2/0xf0 [  314.360146]

[<ffffffff8108b4a0>]

Quoted 6 lines
? kthread_create_on_node+0x1c0/0x1c0
[  314.360146]  [<ffffffff817318bc>] ret_from_fork+0x7c/0xb0 [
314.360146]  [<ffffffff8108b4a0>] ? kthread_create_on_node+0x1c0/0x1c0
[  314.360146] Code: cb 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66

66 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 89 fb 48 81 ec 48 01 00 00 <48> 8b 47 10 48 89 bd a0 fe ff ff 48 89 b5 b0 fe ff ff 48 89 85 [

314.360146]

Quoted 6 lines

RIP [<ffffffffa02ef74c>] media_entity_pipeline_start+0x1c/0x390 [media] [ 314.360146] RSP <ffff880075f7bcd0> [ 314.360146] CR2: 0000000000000010 [ 314.360146] - --[ end trace 4afaa17fd66e17b4 ]---

I hope you can solve it, I also get the same problem when I build the

drivers

Quoted 13 lines

with media_build mips cross compiled for VU+ Solo2 which also runs kernel 3.13.

Thanks, Gert-Jan

Quoted 8 lines
Quoted 8 lines
Quoted 4 lines

What is wrong, or do I miss something ?
I also added the firmware described at:
http://www.linuxtv.org/wiki/index.php/Geniatech_T230

regards
Antti

It's working now:

[ 1460.848020] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 1460.980871] usb 2-4: New USB device found, idVendor=0572, idProduct=c688
[ 1460.980875] usb 2-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1460.980878] usb 2-4: Product: USB Stick
[ 1460.980881] usb 2-4: Manufacturer: Max
[ 1460.980883] usb 2-4: SerialNumber: 080116
[ 1461.036963] media: module verification failed: signature and/or  required
key missing - tainting kernel
[ 1461.037383] media: Linux media interface: v0.10
[ 1461.053284] WARNING: You are using an experimental version of the media
stack.
[ 1461.053284]  As the driver is backported to an older kernel, it doesn't
offer
[ 1461.053284]  enough quality for its usage in production.
[ 1461.053284]  Use it with care.
[ 1461.053284] Latest git patches (needed if you report a bug to
[email protected]):
[ 1461.053284]  8a26a258bdb82db241cdc35f332f88dd67bdb9c9 [media] dvb core:
only start media entity if not NULL
[ 1461.053284]  99a85b901eb54f62ff0c3fd6eb56e60b7b9f15c8 Merge tag
'v4.0-rc1' into patchwork
[ 1461.053284]  c517d838eb7d07bbe9507871fab3931deccff539 Linux 4.0-rc1
[ 1461.075904] WARNING: You are using an experimental version of the media
stack.
[ 1461.075904]  As the driver is backported to an older kernel, it doesn't
offer
[ 1461.075904]  enough quality for its usage in production.
[ 1461.075904]  Use it with care.
[ 1461.075904] Latest git patches (needed if you report a bug to
[email protected]):
[ 1461.075904]  8a26a258bdb82db241cdc35f332f88dd67bdb9c9 [media] dvb core:
only start media entity if not NULL
[ 1461.075904]  99a85b901eb54f62ff0c3fd6eb56e60b7b9f15c8 Merge tag
'v4.0-rc1' into patchwork
[ 1461.075904]  c517d838eb7d07bbe9507871fab3931deccff539 Linux 4.0-rc1
[ 1461.124021] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[ 1461.360058] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[ 1461.360349] DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
[ 1461.398223] i2c i2c-5: Added multiplexed i2c bus 6
[ 1461.398227] si2168 5-0064: Silicon Labs Si2168 successfully attached
[ 1461.409245] si2157 6-0060: Silicon Labs Si2147/2148/2157/2158
successfully attached
[ 1461.409255] usb 2-4: DVB: registering adapter 0 frontend 0 (Silicon Labs
Si2168)...
[ 1461.409527] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb2/2-4/input/input13
[ 1461.410733] dvb-usb: schedule remote query interval to 100 msecs.
[ 1461.410918] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and
connected.
[ 1461.410933] usbcore: registered new interface driver dvb_usb_cxusb
[ 1492.358127] si2168 5-0064: found a 'Silicon Labs Si2168-B40'
[ 1492.374658] si2168 5-0064: downloading firmware from file
'dvb-demod-si2168-b40-01.fw'
[ 1492.919874] si2168 5-0064: firmware version: 4.0.4
[ 1492.931124] si2157 6-0060: found a 'Silicon Labs Si2148-A20'
[ 1492.955098] si2157 6-0060: downloading firmware from file
'dvb-tuner-si2158-a20-01.fw'
[ 1494.008500] si2157 6-0060: firmware version: 2.1.6
[ 1494.008515] usb 2-4: DVB: adapter 0 frontend 0 frequency 0 out of range

(110000000..862000000)