ARM: remove non-generic boards
Subsystems (8)
v4 cover ARM: remove non-generic boards
Based on Tom's announce mail
(http://lists.denx.de/pipermail/u-boot/2015-February/203606.html),
let's start removing non-generic ARM boards.
No conversion patches have been posted for these boards.
Changes in v4:
- Rebase on commit 4641429695
Changes in v3:
- Do not remove devkit3250 because Vladimir has post a patch to convert it into Generic Board.
Changes in v2:
- Do not remove armada100 boards because Ajay will send a patch to convert them.
Masahiro Yamada (9):
ARM: remove mx31ads board support
ARM: mx31: remove imx31_phycore board
ARM: remove jadecpu board support
ARM: remove zmx25 board support
ARM: remove dkb board support
ARM: remove cm4008 and cm41xx board support
ARM: remove a320evb board support
ARM: remove tnetv107x board support
ARM: davinci: remove hawkboard support
arch/arm/Kconfig | 45 -- arch/arm/cpu/arm1176/Makefile | 1 - arch/arm/cpu/arm1176/start.S | 22 - arch/arm/cpu/arm1176/tnetv107x/Makefile | 6 - arch/arm/cpu/arm1176/tnetv107x/aemif.c | 78 ---- arch/arm/cpu/arm1176/tnetv107x/clock.c | 432 ------------------ arch/arm/cpu/arm1176/tnetv107x/init.c | 22 - arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S | 10 - arch/arm/cpu/arm1176/tnetv107x/mux.c | 319 ------------- arch/arm/cpu/arm1176/tnetv107x/timer.c | 93 ---- arch/arm/cpu/arm920t/Makefile | 2 - arch/arm/cpu/arm920t/a320/Makefile | 9 - arch/arm/cpu/arm920t/a320/reset.S | 10 - arch/arm/cpu/arm920t/a320/timer.c | 118 ----- arch/arm/cpu/arm920t/ks8695/Makefile | 9 - arch/arm/cpu/arm920t/ks8695/lowlevel_init.S | 189 -------- arch/arm/cpu/arm920t/ks8695/timer.c | 77 ---- arch/arm/cpu/arm926ejs/Makefile | 2 - arch/arm/cpu/arm926ejs/mb86r0x/Makefile | 8 - arch/arm/cpu/arm926ejs/mb86r0x/clock.c | 27 -- arch/arm/cpu/arm926ejs/mb86r0x/reset.c | 24 - arch/arm/cpu/arm926ejs/mb86r0x/timer.c | 115 ----- arch/arm/cpu/arm926ejs/pantheon/Makefile | 9 - arch/arm/cpu/arm926ejs/pantheon/cpu.c | 85 ---- arch/arm/cpu/arm926ejs/pantheon/dram.c | 117 ----- arch/arm/cpu/arm926ejs/pantheon/timer.c | 201 --------- arch/arm/include/asm/arch-a320/a320.h | 22 - arch/arm/include/asm/arch-ks8695/platform.h | 294 ------------ arch/arm/include/asm/arch-mb86r0x/hardware.h | 15 - arch/arm/include/asm/arch-mb86r0x/mb86r0x.h | 599 ------------------------- arch/arm/include/asm/arch-pantheon/config.h | 53 --- arch/arm/include/asm/arch-pantheon/cpu.h | 77 ---- arch/arm/include/asm/arch-pantheon/gpio.h | 0 arch/arm/include/asm/arch-pantheon/mfp.h | 39 -- arch/arm/include/asm/arch-pantheon/pantheon.h | 38 -- arch/arm/include/asm/arch-tnetv107x/clock.h | 53 --- arch/arm/include/asm/arch-tnetv107x/hardware.h | 160 ------- arch/arm/include/asm/arch-tnetv107x/mux.h | 291 ------------ arch/arm/lib/asm-offsets.c | 46 -- arch/arm/mach-davinci/Kconfig | 4 - board/Marvell/dkb/Kconfig | 15 - board/Marvell/dkb/MAINTAINERS | 6 - board/Marvell/dkb/Makefile | 9 - board/Marvell/dkb/dkb.c | 85 ---- board/cm4008/Kconfig | 12 - board/cm4008/MAINTAINERS | 6 - board/cm4008/Makefile | 8 - board/cm4008/cm4008.c | 88 ---- board/cm4008/config.mk | 1 - board/cm4008/flash.c | 395 ---------------- board/cm41xx/Kconfig | 12 - board/cm41xx/MAINTAINERS | 6 - board/cm41xx/Makefile | 8 - board/cm41xx/cm41xx.c | 88 ---- board/cm41xx/config.mk | 1 - board/cm41xx/flash.c | 395 ---------------- board/davinci/da8xxevm/Kconfig | 13 - board/davinci/da8xxevm/MAINTAINERS | 8 - board/davinci/da8xxevm/Makefile | 1 - board/davinci/da8xxevm/README.hawkboard | 92 ---- board/davinci/da8xxevm/hawkboard-ais-nand.cfg | 4 - board/davinci/da8xxevm/hawkboard.c | 120 ----- board/davinci/da8xxevm/u-boot-spl-hawk.lds | 69 --- board/faraday/a320evb/Kconfig | 15 - board/faraday/a320evb/MAINTAINERS | 6 - board/faraday/a320evb/Makefile | 9 - board/faraday/a320evb/a320evb.c | 59 --- board/faraday/a320evb/lowlevel_init.S | 106 ----- board/freescale/mx31ads/Kconfig | 15 - board/freescale/mx31ads/MAINTAINERS | 6 - board/freescale/mx31ads/Makefile | 8 - board/freescale/mx31ads/lowlevel_init.S | 268 ----------- board/freescale/mx31ads/mx31ads.c | 114 ----- board/freescale/mx31ads/u-boot.lds | 110 ----- board/imx31_phycore/Kconfig | 12 - board/imx31_phycore/MAINTAINERS | 11 - board/imx31_phycore/Makefile | 9 - board/imx31_phycore/imx31_phycore.c | 153 ------- board/imx31_phycore/lowlevel_init.S | 88 ---- board/syteco/jadecpu/Kconfig | 15 - board/syteco/jadecpu/MAINTAINERS | 6 - board/syteco/jadecpu/Makefile | 13 - board/syteco/jadecpu/jadecpu.c | 160 ------- board/syteco/jadecpu/lowlevel_init.S | 249 ---------- board/syteco/zmx25/Kconfig | 15 - board/syteco/zmx25/MAINTAINERS | 6 - board/syteco/zmx25/Makefile | 9 - board/syteco/zmx25/lowlevel_init.S | 97 ---- board/syteco/zmx25/zmx25.c | 174 ------- board/ti/tnetv107xevm/Kconfig | 15 - board/ti/tnetv107xevm/MAINTAINERS | 6 - board/ti/tnetv107xevm/Makefile | 5 - board/ti/tnetv107xevm/config.mk | 5 - board/ti/tnetv107xevm/sdb_board.c | 134 ------ configs/a320evb_defconfig | 2 - configs/cm4008_defconfig | 2 - configs/cm41xx_defconfig | 2 - configs/dkb_defconfig | 2 - configs/hawkboard_defconfig | 4 - configs/hawkboard_uart_defconfig | 5 - configs/imx31_phycore_defconfig | 2 - configs/imx31_phycore_eet_defconfig | 3 - configs/jadecpu_defconfig | 2 - configs/mx31ads_defconfig | 2 - configs/tnetv107x_evm_defconfig | 2 - configs/zmx25_defconfig | 2 - doc/README.scrapyard | 44 +- drivers/net/Makefile | 1 - drivers/net/ks8695eth.c | 229 ---------- drivers/serial/Makefile | 1 - drivers/serial/serial.c | 2 - drivers/serial/serial_ks8695.c | 121 ----- drivers/video/Makefile | 1 - drivers/video/mb86r0xgdc.c | 168 ------- drivers/watchdog/Makefile | 1 - drivers/watchdog/tnetv107x_wdt.c | 165 ------- include/configs/a320evb.h | 211 --------- include/configs/cm4008.h | 104 ----- include/configs/cm41xx.h | 104 ----- include/configs/dkb.h | 51 --- include/configs/hawkboard.h | 220 --------- include/configs/imx31_phycore.h | 202 --------- include/configs/jadecpu.h | 273 ----------- include/configs/mx31ads.h | 188 -------- include/configs/tnetv107x_evm.h | 139 ------ include/configs/zmx25.h | 162 ------- include/netdev.h | 1 - include/serial.h | 3 +- 128 files changed, 28 insertions(+), 9454 deletions(-) delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/Makefile delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/aemif.c delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/clock.c delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/init.c delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/mux.c delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/timer.c delete mode 100644 arch/arm/cpu/arm920t/a320/Makefile delete mode 100644 arch/arm/cpu/arm920t/a320/reset.S delete mode 100644 arch/arm/cpu/arm920t/a320/timer.c delete mode 100644 arch/arm/cpu/arm920t/ks8695/Makefile delete mode 100644 arch/arm/cpu/arm920t/ks8695/lowlevel_init.S delete mode 100644 arch/arm/cpu/arm920t/ks8695/timer.c delete mode 100644 arch/arm/cpu/arm926ejs/mb86r0x/Makefile delete mode 100644 arch/arm/cpu/arm926ejs/mb86r0x/clock.c delete mode 100644 arch/arm/cpu/arm926ejs/mb86r0x/reset.c delete mode 100644 arch/arm/cpu/arm926ejs/mb86r0x/timer.c delete mode 100644 arch/arm/cpu/arm926ejs/pantheon/Makefile delete mode 100644 arch/arm/cpu/arm926ejs/pantheon/cpu.c delete mode 100644 arch/arm/cpu/arm926ejs/pantheon/dram.c delete mode 100644 arch/arm/cpu/arm926ejs/pantheon/timer.c delete mode 100644 arch/arm/include/asm/arch-a320/a320.h delete mode 100644 arch/arm/include/asm/arch-ks8695/platform.h delete mode 100644 arch/arm/include/asm/arch-mb86r0x/hardware.h delete mode 100644 arch/arm/include/asm/arch-mb86r0x/mb86r0x.h delete mode 100644 arch/arm/include/asm/arch-pantheon/config.h delete mode 100644 arch/arm/include/asm/arch-pantheon/cpu.h delete mode 100644 arch/arm/include/asm/arch-pantheon/gpio.h delete mode 100644 arch/arm/include/asm/arch-pantheon/mfp.h delete mode 100644 arch/arm/include/asm/arch-pantheon/pantheon.h delete mode 100644 arch/arm/include/asm/arch-tnetv107x/clock.h delete mode 100644 arch/arm/include/asm/arch-tnetv107x/hardware.h delete mode 100644 arch/arm/include/asm/arch-tnetv107x/mux.h delete mode 100644 board/Marvell/dkb/Kconfig delete mode 100644 board/Marvell/dkb/MAINTAINERS delete mode 100644 board/Marvell/dkb/Makefile delete mode 100644 board/Marvell/dkb/dkb.c delete mode 100644 board/cm4008/Kconfig delete mode 100644 board/cm4008/MAINTAINERS delete mode 100644 board/cm4008/Makefile delete mode 100644 board/cm4008/cm4008.c delete mode 100644 board/cm4008/config.mk delete mode 100644 board/cm4008/flash.c delete mode 100644 board/cm41xx/Kconfig delete mode 100644 board/cm41xx/MAINTAINERS delete mode 100644 board/cm41xx/Makefile delete mode 100644 board/cm41xx/cm41xx.c delete mode 100644 board/cm41xx/config.mk delete mode 100644 board/cm41xx/flash.c delete mode 100644 board/davinci/da8xxevm/README.hawkboard delete mode 100644 board/davinci/da8xxevm/hawkboard-ais-nand.cfg delete mode 100644 board/davinci/da8xxevm/hawkboard.c delete mode 100644 board/davinci/da8xxevm/u-boot-spl-hawk.lds delete mode 100644 board/faraday/a320evb/Kconfig delete mode 100644 board/faraday/a320evb/MAINTAINERS delete mode 100644 board/faraday/a320evb/Makefile delete mode 100644 board/faraday/a320evb/a320evb.c delete mode 100644 board/faraday/a320evb/lowlevel_init.S delete mode 100644 board/freescale/mx31ads/Kconfig delete mode 100644 board/freescale/mx31ads/MAINTAINERS delete mode 100644 board/freescale/mx31ads/Makefile delete mode 100644 board/freescale/mx31ads/lowlevel_init.S delete mode 100644 board/freescale/mx31ads/mx31ads.c delete mode 100644 board/freescale/mx31ads/u-boot.lds delete mode 100644 board/imx31_phycore/Kconfig delete mode 100644 board/imx31_phycore/MAINTAINERS delete mode 100644 board/imx31_phycore/Makefile delete mode 100644 board/imx31_phycore/imx31_phycore.c delete mode 100644 board/imx31_phycore/lowlevel_init.S delete mode 100644 board/syteco/jadecpu/Kconfig delete mode 100644 board/syteco/jadecpu/MAINTAINERS delete mode 100644 board/syteco/jadecpu/Makefile delete mode 100644 board/syteco/jadecpu/jadecpu.c delete mode 100644 board/syteco/jadecpu/lowlevel_init.S delete mode 100644 board/syteco/zmx25/Kconfig delete mode 100644 board/syteco/zmx25/MAINTAINERS delete mode 100644 board/syteco/zmx25/Makefile delete mode 100644 board/syteco/zmx25/lowlevel_init.S delete mode 100644 board/syteco/zmx25/zmx25.c delete mode 100644 board/ti/tnetv107xevm/Kconfig delete mode 100644 board/ti/tnetv107xevm/MAINTAINERS delete mode 100644 board/ti/tnetv107xevm/Makefile delete mode 100644 board/ti/tnetv107xevm/config.mk delete mode 100644 board/ti/tnetv107xevm/sdb_board.c delete mode 100644 configs/a320evb_defconfig delete mode 100644 configs/cm4008_defconfig delete mode 100644 configs/cm41xx_defconfig delete mode 100644 configs/dkb_defconfig delete mode 100644 configs/hawkboard_defconfig delete mode 100644 configs/hawkboard_uart_defconfig delete mode 100644 configs/imx31_phycore_defconfig delete mode 100644 configs/imx31_phycore_eet_defconfig delete mode 100644 configs/jadecpu_defconfig delete mode 100644 configs/mx31ads_defconfig delete mode 100644 configs/tnetv107x_evm_defconfig delete mode 100644 configs/zmx25_defconfig delete mode 100644 drivers/net/ks8695eth.c delete mode 100644 drivers/serial/serial_ks8695.c delete mode 100644 drivers/video/mb86r0xgdc.c delete mode 100644 drivers/watchdog/tnetv107x_wdt.c delete mode 100644 include/configs/a320evb.h delete mode 100644 include/configs/cm4008.h delete mode 100644 include/configs/cm41xx.h delete mode 100644 include/configs/dkb.h delete mode 100644 include/configs/hawkboard.h delete mode 100644 include/configs/imx31_phycore.h delete mode 100644 include/configs/jadecpu.h delete mode 100644 include/configs/mx31ads.h delete mode 100644 include/configs/tnetv107x_evm.h delete mode 100644 include/configs/zmx25.h
Signature · 1 line
1.9.1
PATCH v4 1/9 ARM: remove mx31ads board support
This is still a non-generic board.
---
Changes in v4:
- Rebase on commit 4641429695
Changes in v3:
- Do not remove devkit3250 because Vladimir has post a patch to convert it into Generic Board.
Changes in v2:
- Do not remove armada100 boards because Ajay will send a patch to convert them.
arch/arm/Kconfig | 5 - board/freescale/mx31ads/Kconfig | 15 -- board/freescale/mx31ads/MAINTAINERS | 6 - board/freescale/mx31ads/Makefile | 8 - board/freescale/mx31ads/lowlevel_init.S | 268 -------------------------------- board/freescale/mx31ads/mx31ads.c | 114 -------------- board/freescale/mx31ads/u-boot.lds | 110 ------------- configs/mx31ads_defconfig | 2 - doc/README.scrapyard | 35 +++-- include/configs/mx31ads.h | 188 ---------------------- 10 files changed, 18 insertions(+), 733 deletions(-) delete mode 100644 board/freescale/mx31ads/Kconfig delete mode 100644 board/freescale/mx31ads/MAINTAINERS delete mode 100644 board/freescale/mx31ads/Makefile delete mode 100644 board/freescale/mx31ads/lowlevel_init.S delete mode 100644 board/freescale/mx31ads/mx31ads.c delete mode 100644 board/freescale/mx31ads/u-boot.lds delete mode 100644 configs/mx31ads_defconfig delete mode 100644 include/configs/mx31ads.h
arch/arm/Kconfig +0 -5
@@ -272,10 +272,6 @@ config TARGET_QONG bool "Support qong" select CPU_ARM1136 -config TARGET_MX31ADS - bool "Support mx31ads" - select CPU_ARM1136 - config TARGET_MX31PDK bool "Support mx31pdk" select CPU_ARM1136
@@ -797,7 +793,6 @@ source "board/freescale/ls1021atwr/Kconfig" source "board/freescale/mx23evk/Kconfig" source "board/freescale/mx25pdk/Kconfig" source "board/freescale/mx28evk/Kconfig" -source "board/freescale/mx31ads/Kconfig" source "board/freescale/mx31pdk/Kconfig" source "board/freescale/mx35pdk/Kconfig" source "board/freescale/mx51evk/Kconfig"
board/freescale/mx31ads/Kconfig deleted +0 -15
@@ -1,15 +0,0 @@ -if TARGET_MX31ADS - -config SYS_BOARD - default "mx31ads" - -config SYS_VENDOR - default "freescale" - -config SYS_SOC - default "mx31" - -config SYS_CONFIG_NAME - default "mx31ads" - -endif
board/freescale/mx31ads/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MX31ADS BOARD -#M: (resigned) Guennadi Liakhovetski <[email protected]> -S: Orphan (since 2013-09) -F: board/freescale/mx31ads/ -F: include/configs/mx31ads.h -F: configs/mx31ads_defconfig
board/freescale/mx31ads/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# Copyright (C) 2008, Guennadi Liakhovetski <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := mx31ads.o -obj-y += lowlevel_init.o
board/freescale/mx31ads/lowlevel_init.S deleted +0 -268
268 lines not on this page · raw message
board/freescale/mx31ads/mx31ads.c deleted +0 -114
114 lines not on this page · raw message
board/freescale/mx31ads/u-boot.lds deleted +0 -110
110 lines not on this page · raw message
configs/mx31ads_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_MX31ADS=y
doc/README.scrapyard +18 -17
@@ -12,23 +12,24 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -icecube_5200 powerpc mpc5xxx - - Wolfgang Denk <[email protected]> -Lite5200 powerpc mpc5xxx - - -cpci5200 powerpc mpc5xxx - - Reinhard Arlt <[email protected]> -mecp5200 powerpc mpc5xxx - - Reinhard Arlt <[email protected]> -pf5200 powerpc mpc5xxx - - Reinhard Arlt <[email protected]> -PM520 powerpc mpc5xxx - - Josef Wagner <[email protected]> -Total5200 powerpc mpc5xxx - - -CATcenter powerpc ppc4xx - - -PPChameleonEVB powerpc ppc4xx - - Andrea "llandre" Marson <[email protected]> -P2020DS powerpc mpc85xx - - -P2020COME powerpc mpc85xx - - Ira W. Snyder <[email protected]> -P2020RDB powerpc mpc85xx - - Poonam Aggrwal <[email protected]> -P2010RDB powerpc mpc85xx - - -P1020RDB powerpc mpc85xx - - -P1011RDB powerpc mpc85xx - - -MPC8360EMDS powerpc mpc83xx - - Dave Liu <[email protected]> -MPC8360ERDK powerpc mpc83xx - - Anton Vorontsov <[email protected]> +mx31ads arm arm1136 - - Guennadi Liakhovetski <[email protected]> +icecube_5200 powerpc mpc5xxx 37b608a5 2015-01-23 Wolfgang Denk <[email protected]> +Lite5200 powerpc mpc5xxx 37b608a5 2015-01-23 +cpci5200 powerpc mpc5xxx 37b608a5 2015-01-23 Reinhard Arlt <[email protected]> +mecp5200 powerpc mpc5xxx 37b608a5 2015-01-23 Reinhard Arlt <[email protected]> +pf5200 powerpc mpc5xxx 37b608a5 2015-01-23 Reinhard Arlt <[email protected]> +PM520 powerpc mpc5xxx a258e732 2015-01-23 Josef Wagner <[email protected]> +Total5200 powerpc mpc5xxx ad734f7d 2015-01-23 +CATcenter powerpc ppc4xx 5344cc1a 2015-01-23 +PPChameleonEVB powerpc ppc4xx 5344cc1a 2015-01-23 Andrea "llandre" Marson <[email protected]> +P2020DS powerpc mpc85xx 168dcc6c 2015-01-23 +P2020COME powerpc mpc85xx 89123536 2015-01-23 Ira W. Snyder <[email protected]> +P2020RDB powerpc mpc85xx 743d4815 2015-01-23 Poonam Aggrwal <[email protected]> +P2010RDB powerpc mpc85xx 743d4815 2015-01-23 +P1020RDB powerpc mpc85xx 743d4815 2015-01-23 +P1011RDB powerpc mpc85xx 743d4815 2015-01-23 +MPC8360EMDS powerpc mpc83xx 8d1e3cb1 2015-01-23 Dave Liu <[email protected]> +MPC8360ERDK powerpc mpc83xx 8d1e3cb1 2015-01-23 Anton Vorontsov <[email protected]> P3G4 powerpc 74xx_7xx d928664f 2015-01-16 Wolfgang Denk <[email protected]> ZUMA powerpc 74xx_7xx d928664f 2015-01-16 Nye Liu <[email protected]> ppmc7xx powerpc 74xx_7xx d928664f 2015-01-16
include/configs/mx31ads.h deleted +0 -188
188 lines not on this page · raw message
Signature · 1 line
1.9.1
Fabio Estevam
reviewerPATCH v4 1/9 ARM: remove mx31ads board support
Quoted 5 lines · Masahiro Yamada
This is still a non-generic board.
Signed-off-by Masahiro Yamada <[email protected]>Cc Guennadi Liakhovetski <[email protected]>Acked-by Marek Vasut <[email protected]>
I have sent a patch adding generic support for this board. Please do not remove it.
Thanks
PATCH v4 1/9 ARM: remove mx31ads board support
Hi Fabio,
Thanks for converting some boards.
I have dropped 1/9, 2/9, 4/9
and have posted v5.
BTW, is it possible to use the common linker script instead of board/freescale/mx31ads/u-boot.lds ?
I am just wondering why U-Boot nees so many
board-customised linker scripts.
Quoted 12 lines · On Mon, 23 Feb 2015 19:32:23 -0300 Fabio Estevam <[email protected]> wrote:
Quoted 5 lines · Masahiro Yamada
This is still a non-generic board.
Signed-off-by Masahiro Yamada <[email protected]>Cc Guennadi Liakhovetski <[email protected]>Acked-by Marek Vasut <[email protected]>I have sent a patch adding generic support for this board. Please do not remove it.
Thanks
Fabio Estevam
reviewerPATCH v4 1/9 ARM: remove mx31ads board support
Quoted 6 lines · Masahiro Yamada
Hi Fabio,
Thanks for converting some boards.
I have dropped 1/9, 2/9, 4/9
and have posted v5.
Thanks, Masahiro.
Quoted 3 lines
BTW, is it possible to use the common linker script instead of
board/freescale/mx31ads/u-boot.lds?
Yes, I think this is a good idea.
Regards,
Fabio Estevam
PATCH v4 1/9 ARM: remove mx31ads board support
Hi Fabio,
2015-02-24 21:46 GMT+09:00 Fabio Estevam <[email protected]>:
Quoted 9 lines
Quoted 6 lines · Masahiro Yamada
Hi Fabio,
Thanks for converting some boards.
I have dropped 1/9, 2/9, 4/9
and have posted v5.
Quoted 8 lines
Thanks, Masahiro.
Quoted 3 lines
BTW, is it possible to use the common linker script instead of
board/freescale/mx31ads/u-boot.lds?Yes, I think this is a good idea.
Could you do it, please?
Signature · 2 lines
Best Regards Masahiro Yamada
Fabio Estevam
reviewerPATCH v4 1/9 ARM: remove mx31ads board support
Hi Masahiro
Quoted 6 lines · Masahiro Yamada
Quoted 4 lines
Quoted 2 lines
BTW, is it possible to use the common linker script instead of
board/freescale/mx31ads/u-boot.lds?Yes, I think this is a good idea.
Could you do it, please?
I don't have access to a mx31ads board, so I can't work on it.
Regards,
Fabio Estevam
PATCH v4 1/9 ARM: remove mx31ads board support
Hi Fabio,
2015-04-09 0:21 GMT+09:00 Fabio Estevam <[email protected]>:
Quoted 5 lines
Hi Masahiro
On Tue, Mar 17, 2015 at 3:07 AM, Masahiro Yamada
<[email protected]> wrote:
Quoted 9 lines
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
BTW, is it possible to use the common linker script instead of
board/freescale/mx31ads/u-boot.lds?Yes, I think this is a good idea.
Could you do it, please?
I don't have access to a mx31ads board, so I can't work on it.
OK.
IIRC, we are supposed to do run-test just in case
when we convert a board into Generic board.
So, I thought you had this board.
Signature · 2 lines
Best Regards Masahiro Yamada
PATCH v4 2/9 ARM: mx31: remove imx31_phycore board
In reply to Masahiro YamadaThis is still a non-generic board.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/Kconfig | 5 - board/imx31_phycore/Kconfig | 12 --- board/imx31_phycore/MAINTAINERS | 11 -- board/imx31_phycore/Makefile | 9 -- board/imx31_phycore/imx31_phycore.c | 153 --------------------------- board/imx31_phycore/lowlevel_init.S | 88 ---------------- configs/imx31_phycore_defconfig | 2 - configs/imx31_phycore_eet_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/imx31_phycore.h | 202 ------------------------------------ 10 files changed, 1 insertion(+), 485 deletions(-) delete mode 100644 board/imx31_phycore/Kconfig delete mode 100644 board/imx31_phycore/MAINTAINERS delete mode 100644 board/imx31_phycore/Makefile delete mode 100644 board/imx31_phycore/imx31_phycore.c delete mode 100644 board/imx31_phycore/lowlevel_init.S delete mode 100644 configs/imx31_phycore_defconfig delete mode 100644 configs/imx31_phycore_eet_defconfig delete mode 100644 include/configs/imx31_phycore.h
arch/arm/Kconfig +0 -5
@@ -264,10 +264,6 @@ config TARGET_INTEGRATORCP_CM1136 bool "Support integratorcp_cm1136" select CPU_ARM1136 -config TARGET_IMX31_PHYCORE - bool "Support imx31_phycore" - select CPU_ARM1136 - config TARGET_QONG bool "Support qong" select CPU_ARM1136
@@ -812,7 +808,6 @@ source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hale/tt01/Kconfig" source "board/icpdas/lp8x4x/Kconfig" -source "board/imx31_phycore/Kconfig" source "board/isee/igep0033/Kconfig" source "board/jornada/Kconfig" source "board/karo/tx25/Kconfig"
board/imx31_phycore/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_IMX31_PHYCORE - -config SYS_BOARD - default "imx31_phycore" - -config SYS_SOC - default "mx31" - -config SYS_CONFIG_NAME - default "imx31_phycore" - -endif
board/imx31_phycore/MAINTAINERS deleted +0 -11
@@ -1,11 +0,0 @@ -IMX31_PHYCORE BOARD -#M: - -S: Maintained -F: board/imx31_phycore/ -F: include/configs/imx31_phycore.h -F: configs/imx31_phycore_defconfig - -IMX31_PHYCORE_EET BOARD -#M: (resigned) Guennadi Liakhovetski <[email protected]> -S: Orphan (since 2013-09) -F: configs/imx31_phycore_eet_defconfig
board/imx31_phycore/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := imx31_phycore.o -obj-y += lowlevel_init.o
board/imx31_phycore/imx31_phycore.c deleted +0 -153
153 lines not on this page · raw message
board/imx31_phycore/lowlevel_init.S deleted +0 -88
88 lines not on this page · raw message
configs/imx31_phycore_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_IMX31_PHYCORE=y
configs/imx31_phycore_eet_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="IMX31_PHYCORE_EET" -CONFIG_ARM=y -CONFIG_TARGET_IMX31_PHYCORE=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +imx31_phycore arm arm1136 - - Guennadi Liakhovetski <[email protected]> mx31ads arm arm1136 - - Guennadi Liakhovetski <[email protected]> icecube_5200 powerpc mpc5xxx 37b608a5 2015-01-23 Wolfgang Denk <[email protected]> Lite5200 powerpc mpc5xxx 37b608a5 2015-01-23
include/configs/imx31_phycore.h deleted +0 -202
202 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 2/9 ARM: mx31: remove imx31_phycore board
Hi Masahiro,
On Mon, 23 Feb 2015 00:20:10 +0900 Masahiro Yamada <[email protected]> wrote:
...
Quoted 9 lines
10 files changed, 1 insertion(+), 485 deletions(-) delete mode 100644 board/imx31_phycore/Kconfig delete mode 100644 board/imx31_phycore/MAINTAINERS delete mode 100644 board/imx31_phycore/Makefile delete mode 100644 board/imx31_phycore/imx31_phycore.c delete mode 100644 board/imx31_phycore/lowlevel_init.S delete mode 100644 configs/imx31_phycore_defconfig delete mode 100644 configs/imx31_phycore_eet_defconfig delete mode 100644 include/configs/imx31_phycore.h
There is a pending patch, converting this board to generic board. I'll test it in the next week, so do not remove this board, please.
Thanks,
Anatolij
PATCH v4 3/9 ARM: remove jadecpu board support
In reply to Masahiro YamadaThis is still a non-generic board.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/Kconfig | 5 - arch/arm/cpu/arm926ejs/Makefile | 1 - arch/arm/cpu/arm926ejs/mb86r0x/Makefile | 8 - arch/arm/cpu/arm926ejs/mb86r0x/clock.c | 27 -- arch/arm/cpu/arm926ejs/mb86r0x/reset.c | 24 -- arch/arm/cpu/arm926ejs/mb86r0x/timer.c | 115 ----- arch/arm/include/asm/arch-mb86r0x/hardware.h | 15 - arch/arm/include/asm/arch-mb86r0x/mb86r0x.h | 599 --------------------------- arch/arm/lib/asm-offsets.c | 46 -- board/syteco/jadecpu/Kconfig | 15 - board/syteco/jadecpu/MAINTAINERS | 6 - board/syteco/jadecpu/Makefile | 13 - board/syteco/jadecpu/jadecpu.c | 160 ------- board/syteco/jadecpu/lowlevel_init.S | 249 ----------- configs/jadecpu_defconfig | 2 - doc/README.scrapyard | 1 + drivers/video/Makefile | 1 - drivers/video/mb86r0xgdc.c | 168 -------- include/configs/jadecpu.h | 273 ------------ include/serial.h | 2 +- 20 files changed, 2 insertions(+), 1728 deletions(-) delete mode 100644 arch/arm/cpu/arm926ejs/mb86r0x/Makefile delete mode 100644 arch/arm/cpu/arm926ejs/mb86r0x/clock.c delete mode 100644 arch/arm/cpu/arm926ejs/mb86r0x/reset.c delete mode 100644 arch/arm/cpu/arm926ejs/mb86r0x/timer.c delete mode 100644 arch/arm/include/asm/arch-mb86r0x/hardware.h delete mode 100644 arch/arm/include/asm/arch-mb86r0x/mb86r0x.h delete mode 100644 board/syteco/jadecpu/Kconfig delete mode 100644 board/syteco/jadecpu/MAINTAINERS delete mode 100644 board/syteco/jadecpu/Makefile delete mode 100644 board/syteco/jadecpu/jadecpu.c delete mode 100644 board/syteco/jadecpu/lowlevel_init.S delete mode 100644 configs/jadecpu_defconfig delete mode 100644 drivers/video/mb86r0xgdc.c delete mode 100644 include/configs/jadecpu.h
arch/arm/Kconfig +0 -5
@@ -144,10 +144,6 @@ config TARGET_DEVKIT3250 bool "Support devkit3250" select CPU_ARM926EJS -config TARGET_JADECPU - bool "Support jadecpu" - select CPU_ARM926EJS - config TARGET_MX25PDK bool "Support mx25pdk" select CPU_ARM926EJS
@@ -843,7 +839,6 @@ source "board/st-ericsson/snowball/Kconfig" source "board/st-ericsson/u8500/Kconfig" source "board/st/stv0991/Kconfig" source "board/sunxi/Kconfig" -source "board/syteco/jadecpu/Kconfig" source "board/syteco/zmx25/Kconfig" source "board/tbs/tbs2910/Kconfig" source "board/ti/am335x/Kconfig"
arch/arm/cpu/arm926ejs/Makefile +0 -1
@@ -16,7 +16,6 @@ endif obj-$(CONFIG_ARMADA100) += armada100/ obj-$(if $(filter lpc32xx,$(SOC)),y) += lpc32xx/ -obj-$(CONFIG_MB86R0x) += mb86r0x/ obj-$(CONFIG_MX25) += mx25/ obj-$(CONFIG_MX27) += mx27/ obj-$(if $(filter mxs,$(SOC)),y) += mxs/
arch/arm/cpu/arm926ejs/mb86r0x/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = clock.o reset.o timer.o
arch/arm/cpu/arm926ejs/mb86r0x/clock.c deleted +0 -27
@@ -1,27 +0,0 @@ -/* -* (C) Copyright 2010 -* Matthias Weisser <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> - -/* -* Get the peripheral bus frequency depending on pll pin settings -*/ -ulong get_bus_freq (ulong dummy) -{ -struct mb86r0x_crg * crg = (struct mb86r0x_crg *) - MB86R0x_CRG_BASE; -uint32_t pllmode; - - pllmode =readl (&crg->crpr) & MB86R0x_CRG_CRPR_PLLMODE; - -if (pllmode == MB86R0x_CRG_CRPR_PLLMODE_X20) -return 40000000 ; - -return 41164767 ; -}
arch/arm/cpu/arm926ejs/mb86r0x/reset.c deleted +0 -24
@@ -1,24 +0,0 @@ -/* -* (C) Copyright 2010 -* Matthias Weisser <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> - -/* -* Reset the cpu by setting software reset request bit -*/ -void reset_cpu (ulong ignored) -{ -struct mb86r0x_crg * crg = (struct mb86r0x_crg *) - MB86R0x_CRG_BASE; - -writel (MB86R0x_CRSR_SWRSTREQ, &crg->crsr); -while (1 ) -/* NOP */ ; -/* Never reached */ -}
arch/arm/cpu/arm926ejs/mb86r0x/timer.c deleted +0 -115
115 lines not on this page · raw message
arch/arm/include/asm/arch-mb86r0x/hardware.h deleted +0 -15
@@ -1,15 +0,0 @@ -/* -* (C) Copyright 2007 -* -* Author : Carsten Schneider, mycable GmbH -* <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <linux/sizes.h> -#include <asm/arch/mb86r0x.h> - -#endif
arch/arm/include/asm/arch-mb86r0x/mb86r0x.h deleted +0 -599
599 lines not on this page · raw message
arch/arm/lib/asm-offsets.c +0 -46
64 lines not on this page · raw message
board/syteco/jadecpu/Kconfig deleted +0 -15
@@ -1,15 +0,0 @@ -if TARGET_JADECPU - -config SYS_BOARD - default "jadecpu" - -config SYS_VENDOR - default "syteco" - -config SYS_SOC - default "mb86r0x" - -config SYS_CONFIG_NAME - default "jadecpu" - -endif
board/syteco/jadecpu/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -JADECPU BOARD -M: Matthias Weisser <[email protected]> -S: Maintained -F: board/syteco/jadecpu/ -F: include/configs/jadecpu.h -F: configs/jadecpu_defconfig
board/syteco/jadecpu/Makefile deleted +0 -13
@@ -1,13 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# (C) Copyright 2008 -# Stelian Pop <[email protected]> -# Lead Tech Design <www.leadtechdesign.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += jadecpu.o -obj-y += lowlevel_init.o
board/syteco/jadecpu/jadecpu.c deleted +0 -160
160 lines not on this page · raw message
board/syteco/jadecpu/lowlevel_init.S deleted +0 -249
249 lines not on this page · raw message
configs/jadecpu_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_JADECPU=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +jadecpu arm arm926ejs - - Matthias Weisser <[email protected]> imx31_phycore arm arm1136 - - Guennadi Liakhovetski <[email protected]> mx31ads arm arm1136 - - Guennadi Liakhovetski <[email protected]> icecube_5200 powerpc mpc5xxx 37b608a5 2015-01-23 Wolfgang Denk <[email protected]>
drivers/video/Makefile +0 -1
@@ -32,7 +32,6 @@ obj-$(CONFIG_VIDEO_IMX25LCDC) += imx25lcdc.o videomodes.o obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o -obj-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o obj-$(CONFIG_VIDEO_IPUV3) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o
drivers/video/mb86r0xgdc.c deleted +0 -168
168 lines not on this page · raw message
include/configs/jadecpu.h deleted +0 -273
273 lines not on this page · raw message
include/serial.h +1 -1
@@ -29,7 +29,7 @@ extern struct serial_device *default_serial_console(void); #if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_440) || \ - defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \ + defined(CONFIG_MPC5xxx) || \ defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \ defined(CONFIG_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \
Signature · 1 line
1.9.1
PATCH v4 4/9 ARM: remove zmx25 board support
In reply to Masahiro YamadaThis is still a non-generic board.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/Kconfig | 5 -- board/syteco/zmx25/Kconfig | 15 ---- board/syteco/zmx25/MAINTAINERS | 6 -- board/syteco/zmx25/Makefile | 9 -- board/syteco/zmx25/lowlevel_init.S | 97 --------------------- board/syteco/zmx25/zmx25.c | 174 ------------------------------------- configs/zmx25_defconfig | 2 - doc/README.scrapyard | 1 + include/configs/zmx25.h | 162 ---------------------------------- 9 files changed, 1 insertion(+), 470 deletions(-) delete mode 100644 board/syteco/zmx25/Kconfig delete mode 100644 board/syteco/zmx25/MAINTAINERS delete mode 100644 board/syteco/zmx25/Makefile delete mode 100644 board/syteco/zmx25/lowlevel_init.S delete mode 100644 board/syteco/zmx25/zmx25.c delete mode 100644 configs/zmx25_defconfig delete mode 100644 include/configs/zmx25.h
arch/arm/Kconfig +0 -5
@@ -153,10 +153,6 @@ config TARGET_TX25 select CPU_ARM926EJS select SUPPORT_SPL -config TARGET_ZMX25 - bool "Support zmx25" - select CPU_ARM926EJS - config TARGET_APF27 bool "Support apf27" select CPU_ARM926EJS
@@ -839,7 +835,6 @@ source "board/st-ericsson/snowball/Kconfig" source "board/st-ericsson/u8500/Kconfig" source "board/st/stv0991/Kconfig" source "board/sunxi/Kconfig" -source "board/syteco/zmx25/Kconfig" source "board/tbs/tbs2910/Kconfig" source "board/ti/am335x/Kconfig" source "board/ti/am43xx/Kconfig"
board/syteco/zmx25/Kconfig deleted +0 -15
@@ -1,15 +0,0 @@ -if TARGET_ZMX25 - -config SYS_BOARD - default "zmx25" - -config SYS_VENDOR - default "syteco" - -config SYS_SOC - default "mx25" - -config SYS_CONFIG_NAME - default "zmx25" - -endif
board/syteco/zmx25/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -ZMX25 BOARD -M: Matthias Weisser <[email protected]> -S: Maintained -F: board/syteco/zmx25/ -F: include/configs/zmx25.h -F: configs/zmx25_defconfig
board/syteco/zmx25/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (c) 2010 Graf-Syteco, Matthias Weisser -# <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += zmx25.o -obj-y += lowlevel_init.o
board/syteco/zmx25/lowlevel_init.S deleted +0 -97
97 lines not on this page · raw message
board/syteco/zmx25/zmx25.c deleted +0 -174
174 lines not on this page · raw message
configs/zmx25_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_ZMX25=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +zmx25 arm arm926ejs - - Matthias Weisser <[email protected]> jadecpu arm arm926ejs - - Matthias Weisser <[email protected]> imx31_phycore arm arm1136 - - Guennadi Liakhovetski <[email protected]> mx31ads arm arm1136 - - Guennadi Liakhovetski <[email protected]>
include/configs/zmx25.h deleted +0 -162
162 lines not on this page · raw message
Signature · 1 line
1.9.1
Fabio Estevam
reviewerPATCH v4 4/9 ARM: remove zmx25 board support
Quoted 5 lines · Masahiro Yamada
This is still a non-generic board.
Signed-off-by Masahiro Yamada <[email protected]>Cc Matthias Weisser <[email protected]>Acked-by Marek Vasut <[email protected]>
I have sent a patch adding generic support for this board. Please do not remove it.
Thanks
PATCH v4 5/9 ARM: remove dkb board support
In reply to Masahiro YamadaThis is still a non-generic board.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/Kconfig | 5 - arch/arm/cpu/arm926ejs/Makefile | 1 - arch/arm/cpu/arm926ejs/pantheon/Makefile | 9 -- arch/arm/cpu/arm926ejs/pantheon/cpu.c | 85 ----------- arch/arm/cpu/arm926ejs/pantheon/dram.c | 117 --------------- arch/arm/cpu/arm926ejs/pantheon/timer.c | 201 -------------------------- arch/arm/include/asm/arch-pantheon/config.h | 53 ------- arch/arm/include/asm/arch-pantheon/cpu.h | 77 ---------- arch/arm/include/asm/arch-pantheon/gpio.h | 0 arch/arm/include/asm/arch-pantheon/mfp.h | 39 ----- arch/arm/include/asm/arch-pantheon/pantheon.h | 38 ----- board/Marvell/dkb/Kconfig | 15 -- board/Marvell/dkb/MAINTAINERS | 6 - board/Marvell/dkb/Makefile | 9 -- board/Marvell/dkb/dkb.c | 85 ----------- configs/dkb_defconfig | 2 - doc/README.scrapyard | 1 + include/configs/dkb.h | 51 ------- 18 files changed, 1 insertion(+), 793 deletions(-) delete mode 100644 arch/arm/cpu/arm926ejs/pantheon/Makefile delete mode 100644 arch/arm/cpu/arm926ejs/pantheon/cpu.c delete mode 100644 arch/arm/cpu/arm926ejs/pantheon/dram.c delete mode 100644 arch/arm/cpu/arm926ejs/pantheon/timer.c delete mode 100644 arch/arm/include/asm/arch-pantheon/config.h delete mode 100644 arch/arm/include/asm/arch-pantheon/cpu.h delete mode 100644 arch/arm/include/asm/arch-pantheon/gpio.h delete mode 100644 arch/arm/include/asm/arch-pantheon/mfp.h delete mode 100644 arch/arm/include/asm/arch-pantheon/pantheon.h delete mode 100644 board/Marvell/dkb/Kconfig delete mode 100644 board/Marvell/dkb/MAINTAINERS delete mode 100644 board/Marvell/dkb/Makefile delete mode 100644 board/Marvell/dkb/dkb.c delete mode 100644 configs/dkb_defconfig delete mode 100644 include/configs/dkb.h
arch/arm/Kconfig +0 -5
@@ -219,10 +219,6 @@ config ORION5X bool "Marvell Orion" select CPU_ARM926EJS -config TARGET_DKB - bool "Support dkb" - select CPU_ARM926EJS - config TARGET_SPEAR300 bool "Support spear300" select CPU_ARM926EJS
@@ -746,7 +742,6 @@ source "board/BuR/tseries/Kconfig" source "board/CarMediaLab/flea3/Kconfig" source "board/Marvell/aspenite/Kconfig" source "board/Marvell/db-mv784mp-gp/Kconfig" -source "board/Marvell/dkb/Kconfig" source "board/Marvell/gplugd/Kconfig" source "board/altera/socfpga/Kconfig" source "board/armadeus/apf27/Kconfig"
arch/arm/cpu/arm926ejs/Makefile +0 -1
@@ -19,5 +19,4 @@ obj-$(if $(filter lpc32xx,$(SOC)),y) += lpc32xx/ obj-$(CONFIG_MX25) += mx25/ obj-$(CONFIG_MX27) += mx27/ obj-$(if $(filter mxs,$(SOC)),y) += mxs/ -obj-$(CONFIG_PANTHEON) += pantheon/ obj-$(if $(filter spear,$(SOC)),y) += spear/
arch/arm/cpu/arm926ejs/pantheon/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2011 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Lei Wen <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = cpu.o timer.o dram.o
arch/arm/cpu/arm926ejs/pantheon/cpu.c deleted +0 -85
85 lines not on this page · raw message
arch/arm/cpu/arm926ejs/pantheon/dram.c deleted +0 -117
117 lines not on this page · raw message
arch/arm/cpu/arm926ejs/pantheon/timer.c deleted +0 -201
201 lines not on this page · raw message
arch/arm/include/asm/arch-pantheon/config.h deleted +0 -53
53 lines not on this page · raw message
arch/arm/include/asm/arch-pantheon/cpu.h deleted +0 -77
77 lines not on this page · raw message
arch/arm/include/asm/arch-pantheon/gpio.h deleted +0 -0
arch/arm/include/asm/arch-pantheon/mfp.h deleted +0 -39
@@ -1,39 +0,0 @@ -/* -* Based on arch/arm/include/asm/arch-armada100/mfp.h -* (C) Copyright 2011 -* Marvell Semiconductor <www.marvell.com> -* Written-by: Lei Wen <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __PANTHEON_MFP_H -#define __PANTHEON_MFP_H - -/* -* Frequently used MFP Configuration macros for all PANTHEON family of SoCs -* -* offset, pull,pF, drv,dF, edge,eF ,afn,aF -*/ -/* UART2 */ -#define MFP47_UART2_RXD (MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM) -#define MFP48_UART2_TXD (MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM) -#define MFP53_CI2C_SCL (MFP_REG(0x1b0) | MFP_AF2 | MFP_DRIVE_MEDIUM) -#define MFP54_CI2C_SDA (MFP_REG(0x1b4) | MFP_AF2 | MFP_DRIVE_MEDIUM) - -/* More macros can be defined here... */ -#define MFP_MMC1_DAT7 (MFP_REG(0x84) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_DAT6 (MFP_REG(0x88) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_DAT5 (MFP_REG(0x8c) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_DAT4 (MFP_REG(0x90) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_DAT3 (MFP_REG(0x94) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_DAT2 (MFP_REG(0x98) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_DAT1 (MFP_REG(0x9c) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_DAT0 (MFP_REG(0xa0) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_CMD (MFP_REG(0xa4) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_CLK (MFP_REG(0xa8) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_CD (MFP_REG(0xac) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_WP (MFP_REG(0xb0) | MFP_AF0 | MFP_DRIVE_MEDIUM) - -#define MFP_PIN_MAX 117 -#endif
arch/arm/include/asm/arch-pantheon/pantheon.h deleted +0 -38
@@ -1,38 +0,0 @@ -/* -* (C) Copyright 2011 -* Marvell Semiconductor <www.marvell.com> -* Written-by: Lei Wen <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef _PANTHEON_H -#define _PANTHEON_H - -/* Common APB clock register bit definitions */ -#define APBC_APBCLK (1<<0)/* APB Bus Clock Enable */ -#define APBC_FNCLK (1<<1)/* Functional Clock Enable */ -#define APBC_RST (1<<2)/* Reset Generation */ -/* Functional Clock Selection Mask */ -#define APBC_FNCLKSEL (x) (((x) & 0xf) << 4) - -/* Common APMU register bit definitions */ -#define APMU_PERI_CLK (1<<4)/* Peripheral Clock Enable */ -#define APMU_AXI_CLK (1<<3)/* AXI Clock Enable*/ -#define APMU_PERI_RST (1<<1)/* Peripheral Reset */ -#define APMU_AXI_RST (1<<0)/* AXI Reset */ - -/* Register Base Addresses */ -#define PANTHEON_DRAM_BASE 0xB0000000 -#define PANTHEON_TIMER_BASE 0xD4014000 -#define PANTHEON_WD_TIMER_BASE 0xD4080000 -#define PANTHEON_APBC_BASE 0xD4015000 -#define PANTHEON_UART1_BASE 0xD4017000 -#define PANTHEON_UART2_BASE 0xD4018000 -#define PANTHEON_GPIO_BASE 0xD4019000 -#define PANTHEON_MFPR_BASE 0xD401E000 -#define PANTHEON_MPMU_BASE 0xD4050000 -#define PANTHEON_APMU_BASE 0xD4282800 -#define PANTHEON_CPU_BASE 0xD4282C00 - -#endif /* _PANTHEON_H */
board/Marvell/dkb/Kconfig deleted +0 -15
@@ -1,15 +0,0 @@ -if TARGET_DKB - -config SYS_BOARD - default "dkb" - -config SYS_VENDOR - default "Marvell" - -config SYS_SOC - default "pantheon" - -config SYS_CONFIG_NAME - default "dkb" - -endif
board/Marvell/dkb/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -DKB BOARD -M: Lei Wen <[email protected]> -S: Maintained -F: board/Marvell/dkb/ -F: include/configs/dkb.h -F: configs/dkb_defconfig
board/Marvell/dkb/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2011 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Lei Wen <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dkb.o
board/Marvell/dkb/dkb.c deleted +0 -85
85 lines not on this page · raw message
configs/dkb_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_DKB=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +dkb arm arm926ejs - - Lei Wen <[email protected]> zmx25 arm arm926ejs - - Matthias Weisser <[email protected]> jadecpu arm arm926ejs - - Matthias Weisser <[email protected]> imx31_phycore arm arm1136 - - Guennadi Liakhovetski <[email protected]>
include/configs/dkb.h deleted +0 -51
51 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 6/9 ARM: remove cm4008 and cm41xx board support
In reply to Masahiro YamadaThese are still non-generic boards.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/Kconfig | 10 - arch/arm/cpu/arm920t/Makefile | 1 - arch/arm/cpu/arm920t/ks8695/Makefile | 9 - arch/arm/cpu/arm920t/ks8695/lowlevel_init.S | 189 ------------- arch/arm/cpu/arm920t/ks8695/timer.c | 77 ------ arch/arm/include/asm/arch-ks8695/platform.h | 294 --------------------- board/cm4008/Kconfig | 12 - board/cm4008/MAINTAINERS | 6 - board/cm4008/Makefile | 8 - board/cm4008/cm4008.c | 88 ------- board/cm4008/config.mk | 1 - board/cm4008/flash.c | 395 ---------------------------- board/cm41xx/Kconfig | 12 - board/cm41xx/MAINTAINERS | 6 - board/cm41xx/Makefile | 8 - board/cm41xx/cm41xx.c | 88 ------- board/cm41xx/config.mk | 1 - board/cm41xx/flash.c | 395 ---------------------------- configs/cm4008_defconfig | 2 - configs/cm41xx_defconfig | 2 - doc/README.scrapyard | 2 + drivers/net/Makefile | 1 - drivers/net/ks8695eth.c | 229 ---------------- drivers/serial/Makefile | 1 - drivers/serial/serial.c | 2 - drivers/serial/serial_ks8695.c | 121 --------- include/configs/cm4008.h | 104 -------- include/configs/cm41xx.h | 104 -------- include/netdev.h | 1 - include/serial.h | 1 - 30 files changed, 2 insertions(+), 2168 deletions(-) delete mode 100644 arch/arm/cpu/arm920t/ks8695/Makefile delete mode 100644 arch/arm/cpu/arm920t/ks8695/lowlevel_init.S delete mode 100644 arch/arm/cpu/arm920t/ks8695/timer.c delete mode 100644 arch/arm/include/asm/arch-ks8695/platform.h delete mode 100644 board/cm4008/Kconfig delete mode 100644 board/cm4008/MAINTAINERS delete mode 100644 board/cm4008/Makefile delete mode 100644 board/cm4008/cm4008.c delete mode 100644 board/cm4008/config.mk delete mode 100644 board/cm4008/flash.c delete mode 100644 board/cm41xx/Kconfig delete mode 100644 board/cm41xx/MAINTAINERS delete mode 100644 board/cm41xx/Makefile delete mode 100644 board/cm41xx/cm41xx.c delete mode 100644 board/cm41xx/config.mk delete mode 100644 board/cm41xx/flash.c delete mode 100644 configs/cm4008_defconfig delete mode 100644 configs/cm41xx_defconfig delete mode 100644 drivers/net/ks8695eth.c delete mode 100644 drivers/serial/serial_ks8695.c delete mode 100644 include/configs/cm4008.h delete mode 100644 include/configs/cm41xx.h
arch/arm/Kconfig +0 -10
@@ -88,14 +88,6 @@ config TARGET_SCB9328 bool "Support scb9328" select CPU_ARM920T -config TARGET_CM4008 - bool "Support cm4008" - select CPU_ARM920T - -config TARGET_CM41XX - bool "Support cm41xx" - select CPU_ARM920T - config TARGET_VCMA9 bool "Support VCMA9" select CPU_ARM920T
@@ -758,8 +750,6 @@ source "board/broadcom/bcm28155_ap/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" source "board/broadcom/bcmnsp/Kconfig" source "board/cirrus/edb93xx/Kconfig" -source "board/cm4008/Kconfig" -source "board/cm41xx/Kconfig" source "board/compulab/cm_t335/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig"
arch/arm/cpu/arm920t/Makefile +0 -1
@@ -13,5 +13,4 @@ obj-$(CONFIG_USE_IRQ) += interrupts.o obj-$(if $(filter a320,$(SOC)),y) += a320/ obj-$(CONFIG_EP93XX) += ep93xx/ obj-$(CONFIG_IMX) += imx/ -obj-$(CONFIG_KS8695) += ks8695/ obj-$(CONFIG_S3C24X0) += s3c24x0/
arch/arm/cpu/arm920t/ks8695/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = lowlevel_init.o -obj-y += timer.o
arch/arm/cpu/arm920t/ks8695/lowlevel_init.S deleted +0 -189
189 lines not on this page · raw message
arch/arm/cpu/arm920t/ks8695/timer.c deleted +0 -77
77 lines not on this page · raw message
arch/arm/include/asm/arch-ks8695/platform.h deleted +0 -294
294 lines not on this page · raw message
board/cm4008/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_CM4008 - -config SYS_BOARD - default "cm4008" - -config SYS_SOC - default "ks8695" - -config SYS_CONFIG_NAME - default "cm4008" - -endif
board/cm4008/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -CM4008 BOARD -M: Greg Ungerer <[email protected]> -S: Maintained -F: board/cm4008/ -F: include/configs/cm4008.h -F: configs/cm4008_defconfig
board/cm4008/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := cm4008.o flash.o
board/cm4008/cm4008.c deleted +0 -88
88 lines not on this page · raw message
board/cm4008/config.mk deleted +0 -1
@@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x00f00000
board/cm4008/flash.c deleted +0 -395
395 lines not on this page · raw message
board/cm41xx/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_CM41XX - -config SYS_BOARD - default "cm41xx" - -config SYS_SOC - default "ks8695" - -config SYS_CONFIG_NAME - default "cm41xx" - -endif
board/cm41xx/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -CM41XX BOARD -#M: - -S: Maintained -F: board/cm41xx/ -F: include/configs/cm41xx.h -F: configs/cm41xx_defconfig
board/cm41xx/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := cm41xx.o flash.o
board/cm41xx/cm41xx.c deleted +0 -88
88 lines not on this page · raw message
board/cm41xx/config.mk deleted +0 -1
@@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x00f00000
board/cm41xx/flash.c deleted +0 -395
395 lines not on this page · raw message
configs/cm4008_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_CM4008=y
configs/cm41xx_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_CM41XX=y
doc/README.scrapyard +2 -0
@@ -12,6 +12,8 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +cm4008 arm arm920t - - Greg Ungerer <[email protected]> +cm41xx arm arm920t - - dkb arm arm926ejs - - Lei Wen <[email protected]> zmx25 arm arm926ejs - - Matthias Weisser <[email protected]> jadecpu arm arm926ejs - - Matthias Weisser <[email protected]>
drivers/net/Makefile +0 -1
@@ -33,7 +33,6 @@ obj-$(CONFIG_FTMAC110) += ftmac110.o obj-$(CONFIG_FTMAC100) += ftmac100.o obj-$(CONFIG_GRETH) += greth.o obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o -obj-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_LAN91C96) += lan91c96.o obj-$(CONFIG_MACB) += macb.o
drivers/net/ks8695eth.c deleted +0 -229
229 lines not on this page · raw message
drivers/serial/Makefile +0 -1
@@ -27,7 +27,6 @@ obj-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o obj-$(CONFIG_SYS_NS16550) += ns16550.o obj-$(CONFIG_S5P) += serial_s5p.o obj-$(CONFIG_IMX_SERIAL) += serial_imx.o -obj-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o obj-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o obj-$(CONFIG_MXC_UART) += serial_mxc.o obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o
drivers/serial/serial.c +0 -2
@@ -127,7 +127,6 @@ serial_initfunc(evb64260_serial_initialize);serial_initfunc (imx_serial_initialize);serial_initfunc (iop480_serial_initialize);serial_initfunc (jz_serial_initialize); -serial_initfunc (ks8695_serial_initialize);serial_initfunc (leon2_serial_initialize);serial_initfunc (leon3_serial_initialize);serial_initfunc (lh7a40x_serial_initialize);
@@ -220,7 +219,6 @@ void serial_initialize(void)imx_serial_initialize ();iop480_serial_initialize ();jz_serial_initialize (); -ks8695_serial_initialize ();leon2_serial_initialize ();leon3_serial_initialize ();lh7a40x_serial_initialize ();
drivers/serial/serial_ks8695.c deleted +0 -121
121 lines not on this page · raw message
include/configs/cm4008.h deleted +0 -104
104 lines not on this page · raw message
include/configs/cm41xx.h deleted +0 -104
104 lines not on this page · raw message
include/netdev.h +0 -1
@@ -55,7 +55,6 @@ int ftmac100_initialize(bd_t *bits);int ftmac110_initialize (bd_t *bits);int greth_initialize (bd_t *bis);void gt6426x_eth_initialize (bd_t *bis); -int ks8695_eth_initialize (void );int ks8851_mll_initialize (u8 dev_num,int base_addr);int lan91c96_initialize (u8 dev_num,int base_addr);int macb_eth_initialize (int id,void *regs,unsigned int phy_addr);
include/serial.h +0 -1
@@ -182,7 +182,6 @@ void evb64260_serial_initialize(void);void imx_serial_initialize (void );void iop480_serial_initialize (void );void jz_serial_initialize (void ); -void ks8695_serial_initialize (void );void leon2_serial_initialize (void );void leon3_serial_initialize (void );void lh7a40x_serial_initialize (void );
Signature · 1 line
1.9.1
PATCH v4 7/9 ARM: remove a320evb board support
In reply to Masahiro YamadaThis is still a non-generic board.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/Kconfig | 5 - arch/arm/cpu/arm920t/Makefile | 1 - arch/arm/cpu/arm920t/a320/Makefile | 9 -- arch/arm/cpu/arm920t/a320/reset.S | 10 -- arch/arm/cpu/arm920t/a320/timer.c | 118 ------------------- arch/arm/include/asm/arch-a320/a320.h | 22 ---- board/faraday/a320evb/Kconfig | 15 --- board/faraday/a320evb/MAINTAINERS | 6 - board/faraday/a320evb/Makefile | 9 -- board/faraday/a320evb/a320evb.c | 59 ---------- board/faraday/a320evb/lowlevel_init.S | 106 ----------------- configs/a320evb_defconfig | 2 - doc/README.scrapyard | 1 + include/configs/a320evb.h | 211 ---------------------------------- 14 files changed, 1 insertion(+), 573 deletions(-) delete mode 100644 arch/arm/cpu/arm920t/a320/Makefile delete mode 100644 arch/arm/cpu/arm920t/a320/reset.S delete mode 100644 arch/arm/cpu/arm920t/a320/timer.c delete mode 100644 arch/arm/include/asm/arch-a320/a320.h delete mode 100644 board/faraday/a320evb/Kconfig delete mode 100644 board/faraday/a320evb/MAINTAINERS delete mode 100644 board/faraday/a320evb/Makefile delete mode 100644 board/faraday/a320evb/a320evb.c delete mode 100644 board/faraday/a320evb/lowlevel_init.S delete mode 100644 configs/a320evb_defconfig delete mode 100644 include/configs/a320evb.h
arch/arm/Kconfig +0 -5
@@ -73,10 +73,6 @@ config TARGET_INTEGRATORCP_CM920T bool "Support integratorcp_cm920t" select CPU_ARM920T -config TARGET_A320EVB - bool "Support a320evb" - select CPU_ARM920T - config ARCH_AT91 bool "Atmel AT91"
@@ -759,7 +755,6 @@ source "board/denx/m28evk/Kconfig" source "board/denx/m53evk/Kconfig" source "board/embest/mx6boards/Kconfig" source "board/esg/ima3-mx53/Kconfig" -source "board/faraday/a320evb/Kconfig" source "board/freescale/ls2085a/Kconfig" source "board/freescale/ls1021aqds/Kconfig" source "board/freescale/ls1021atwr/Kconfig"
arch/arm/cpu/arm920t/Makefile +0 -1
@@ -10,7 +10,6 @@ extra-y = start.o obj-y += cpu.o obj-$(CONFIG_USE_IRQ) += interrupts.o -obj-$(if $(filter a320,$(SOC)),y) += a320/ obj-$(CONFIG_EP93XX) += ep93xx/ obj-$(CONFIG_IMX) += imx/ obj-$(CONFIG_S3C24X0) += s3c24x0/
arch/arm/cpu/arm920t/a320/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += reset.o -obj-y += timer.o
arch/arm/cpu/arm920t/a320/reset.S deleted +0 -10
@@ -1,10 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang <[email protected]> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -.global reset_cpu -reset_cpu: - b reset_cpu
arch/arm/cpu/arm920t/a320/timer.c deleted +0 -118
118 lines not on this page · raw message
arch/arm/include/asm/arch-a320/a320.h deleted +0 -22
@@ -1,22 +0,0 @@ -/* -* (C) Copyright 2009 Faraday Technology -* Po-Yu Chuang <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __A320_H -#define __A320_H - -/* -* Hardware register bases -*/ -#define CONFIG_FTSMC020_BASE 0x90200000/* Static Memory Controller */ -#define CONFIG_DEBUG_LED 0x902ffffc/* Debug LED */ -#define CONFIG_FTSDMC020_BASE 0x90300000/* SDRAM Controller */ -#define CONFIG_FTMAC100_BASE 0x90900000/* Ethernet */ -#define CONFIG_FTPMU010_BASE 0x98100000/* Power Management Unit */ -#define CONFIG_FTTMR010_BASE 0x98400000/* Timer */ -#define CONFIG_FTRTC010_BASE 0x98600000/* Real Time Clock*/ - -#endif /* __A320_H */
board/faraday/a320evb/Kconfig deleted +0 -15
@@ -1,15 +0,0 @@ -if TARGET_A320EVB - -config SYS_BOARD - default "a320evb" - -config SYS_VENDOR - default "faraday" - -config SYS_SOC - default "a320" - -config SYS_CONFIG_NAME - default "a320evb" - -endif
board/faraday/a320evb/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -A320EVB BOARD -M: Po-Yu Chuang <[email protected]> -S: Maintained -F: board/faraday/a320evb/ -F: include/configs/a320evb.h -F: configs/a320evb_defconfig
board/faraday/a320evb/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := a320evb.o -obj-y += lowlevel_init.o
board/faraday/a320evb/a320evb.c deleted +0 -59
59 lines not on this page · raw message
board/faraday/a320evb/lowlevel_init.S deleted +0 -106
106 lines not on this page · raw message
configs/a320evb_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_A320EVB=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +a320evb arm arm920t - - Po-Yu Chuang <[email protected]> cm4008 arm arm920t - - Greg Ungerer <[email protected]> cm41xx arm arm920t - - dkb arm arm926ejs - - Lei Wen <[email protected]>
include/configs/a320evb.h deleted +0 -211
211 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 8/9 ARM: remove tnetv107x board support
In reply to Masahiro YamadaThis is still a non-generic board.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/Kconfig | 5 - arch/arm/cpu/arm1176/Makefile | 1 - arch/arm/cpu/arm1176/start.S | 22 -- arch/arm/cpu/arm1176/tnetv107x/Makefile | 6 - arch/arm/cpu/arm1176/tnetv107x/aemif.c | 78 ----- arch/arm/cpu/arm1176/tnetv107x/clock.c | 432 ------------------------- arch/arm/cpu/arm1176/tnetv107x/init.c | 22 -- arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S | 10 - arch/arm/cpu/arm1176/tnetv107x/mux.c | 319 ------------------ arch/arm/cpu/arm1176/tnetv107x/timer.c | 93 ------ arch/arm/include/asm/arch-tnetv107x/clock.h | 53 --- arch/arm/include/asm/arch-tnetv107x/hardware.h | 160 --------- arch/arm/include/asm/arch-tnetv107x/mux.h | 291 ----------------- board/ti/tnetv107xevm/Kconfig | 15 - board/ti/tnetv107xevm/MAINTAINERS | 6 - board/ti/tnetv107xevm/Makefile | 5 - board/ti/tnetv107xevm/config.mk | 5 - board/ti/tnetv107xevm/sdb_board.c | 134 -------- configs/tnetv107x_evm_defconfig | 2 - doc/README.scrapyard | 1 + drivers/watchdog/Makefile | 1 - drivers/watchdog/tnetv107x_wdt.c | 165 ---------- include/configs/tnetv107x_evm.h | 139 -------- 23 files changed, 1 insertion(+), 1964 deletions(-) delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/Makefile delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/aemif.c delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/clock.c delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/init.c delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/mux.c delete mode 100644 arch/arm/cpu/arm1176/tnetv107x/timer.c delete mode 100644 arch/arm/include/asm/arch-tnetv107x/clock.h delete mode 100644 arch/arm/include/asm/arch-tnetv107x/hardware.h delete mode 100644 arch/arm/include/asm/arch-tnetv107x/mux.h delete mode 100644 board/ti/tnetv107xevm/Kconfig delete mode 100644 board/ti/tnetv107xevm/MAINTAINERS delete mode 100644 board/ti/tnetv107xevm/Makefile delete mode 100644 board/ti/tnetv107xevm/config.mk delete mode 100644 board/ti/tnetv107xevm/sdb_board.c delete mode 100644 configs/tnetv107x_evm_defconfig delete mode 100644 drivers/watchdog/tnetv107x_wdt.c delete mode 100644 include/configs/tnetv107x_evm.h
arch/arm/Kconfig +0 -5
@@ -282,10 +282,6 @@ config TARGET_RPI_2 bool "Support rpi_2" select CPU_V7 -config TARGET_TNETV107X_EVM - bool "Support tnetv107x_evm" - select CPU_ARM1176 - config TARGET_INTEGRATORAP_CM946ES bool "Support integratorap_cm946es" select CPU_ARM946ES
@@ -820,7 +816,6 @@ source "board/ti/am335x/Kconfig" source "board/ti/am43xx/Kconfig" source "board/ti/ti814x/Kconfig" source "board/ti/ti816x/Kconfig" -source "board/ti/tnetv107xevm/Kconfig" source "board/timll/devkit3250/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/tqc/tqma6/Kconfig"
arch/arm/cpu/arm1176/Makefile +0 -1
@@ -12,4 +12,3 @@ extra-y = start.o obj-y = cpu.o obj-$(CONFIG_BCM2835) += bcm2835/ -obj-$(CONFIG_TNETV107X) += tnetv107x/
arch/arm/cpu/arm1176/start.S +0 -22
@@ -96,28 +96,6 @@ mmu_disable: mov pc, r2 mmu_disable_phys: -#ifdef CONFIG_DISABLE_TCM - /* - * Disable the TCMs - */ - mrc p15, 0, r0, c0, c0, 2 /* Return TCM details */ - cmp r0, #0 - beq skip_tcmdisable - mov r1, #0 - mov r2, #1 - tst r0, r2 - mcrne p15, 0, r1, c9, c1, 1 /* Disable Instruction TCM if present*/ - tst r0, r2, LSL #16 - mcrne p15, 0, r1, c9, c1, 0 /* Disable Data TCM if present*/ -skip_tcmdisable: -#endif -#endif - -#ifdef CONFIG_PERIPORT_REMAP - /* Peri port setup */ - ldr r0, =CONFIG_PERIPORT_BASE - orr r0, r0, #CONFIG_PERIPORT_SIZE - mcr p15,0,r0,c15,c2,4 #endif /*
arch/arm/cpu/arm1176/tnetv107x/Makefile deleted +0 -6
@@ -1,6 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += aemif.o clock.o init.o mux.o timer.o -obj-y += lowlevel_init.o
arch/arm/cpu/arm1176/tnetv107x/aemif.c deleted +0 -78
78 lines not on this page · raw message
arch/arm/cpu/arm1176/tnetv107x/clock.c deleted +0 -432
432 lines not on this page · raw message
arch/arm/cpu/arm1176/tnetv107x/init.c deleted +0 -22
@@ -1,22 +0,0 @@ -/* -* TNETV107X: Architecture initialization -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/io.h> - -void chip_configuration_unlock (void ) -{ -__raw_writel (TNETV107X_KICK0_MAGIC ,TNETV107X_KICK0 ); -__raw_writel (TNETV107X_KICK1_MAGIC ,TNETV107X_KICK1 ); -} - -int arch_cpu_init (void ) -{ -icache_enable (); -chip_configuration_unlock (); - -return 0 ; -}
arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S deleted +0 -10
@@ -1,10 +0,0 @@ -/* - * TNETV107X: Low-level pre-relocation initialization - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -.globl lowlevel_init -lowlevel_init: - /* nothing for now, maybe needed for more exotic boot modes */ - mov pc, lr
arch/arm/cpu/arm1176/tnetv107x/mux.c deleted +0 -319
319 lines not on this page · raw message
arch/arm/cpu/arm1176/tnetv107x/timer.c deleted +0 -93
93 lines not on this page · raw message
arch/arm/include/asm/arch-tnetv107x/clock.h deleted +0 -53
53 lines not on this page · raw message
arch/arm/include/asm/arch-tnetv107x/hardware.h deleted +0 -160
160 lines not on this page · raw message
arch/arm/include/asm/arch-tnetv107x/mux.h deleted +0 -291
291 lines not on this page · raw message
board/ti/tnetv107xevm/Kconfig deleted +0 -15
@@ -1,15 +0,0 @@ -if TARGET_TNETV107X_EVM - -config SYS_BOARD - default "tnetv107xevm" - -config SYS_VENDOR - default "ti" - -config SYS_SOC - default "tnetv107x" - -config SYS_CONFIG_NAME - default "tnetv107x_evm" - -endif
board/ti/tnetv107xevm/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -TNETV107XEVM BOARD -#M: Chan-Taek Park <[email protected]> -S: Orphan (since 2014-06) -F: board/ti/tnetv107xevm/ -F: include/configs/tnetv107x_evm.h -F: configs/tnetv107x_evm_defconfig
board/ti/tnetv107xevm/Makefile deleted +0 -5
@@ -1,5 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += sdb_board.o
board/ti/tnetv107xevm/config.mk deleted +0 -5
@@ -1,5 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0x83FC0000
board/ti/tnetv107xevm/sdb_board.c deleted +0 -134
134 lines not on this page · raw message
configs/tnetv107x_evm_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_TNETV107X_EVM=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +tnetv107x arm arm1176 - - Chan-Taek Park <[email protected]> a320evb arm arm920t - - Po-Yu Chuang <[email protected]> cm4008 arm arm920t - - Greg Ungerer <[email protected]> cm41xx arm arm920t - -
drivers/watchdog/Makefile +0 -1
@@ -10,7 +10,6 @@ obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610 ls102xa)) obj-y += imx_watchdog.o endif -obj-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o obj-$(CONFIG_S5P) += s5p_wdt.o obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o obj-$(CONFIG_BFIN_WATCHDOG) += bfin_wdt.o
drivers/watchdog/tnetv107x_wdt.c deleted +0 -165
165 lines not on this page · raw message
include/configs/tnetv107x_evm.h deleted +0 -139
139 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 9/9 ARM: davinci: remove hawkboard support
In reply to Masahiro YamadaThis is still a non-generic board.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/mach-davinci/Kconfig | 4 - board/davinci/da8xxevm/Kconfig | 13 -- board/davinci/da8xxevm/MAINTAINERS | 8 - board/davinci/da8xxevm/Makefile | 1 - board/davinci/da8xxevm/README.hawkboard | 92 ----------- board/davinci/da8xxevm/hawkboard-ais-nand.cfg | 4 - board/davinci/da8xxevm/hawkboard.c | 120 -------------- board/davinci/da8xxevm/u-boot-spl-hawk.lds | 69 -------- configs/hawkboard_defconfig | 4 - configs/hawkboard_uart_defconfig | 5 - doc/README.scrapyard | 1 + include/configs/hawkboard.h | 220 -------------------------- 12 files changed, 1 insertion(+), 540 deletions(-) delete mode 100644 board/davinci/da8xxevm/README.hawkboard delete mode 100644 board/davinci/da8xxevm/hawkboard-ais-nand.cfg delete mode 100644 board/davinci/da8xxevm/hawkboard.c delete mode 100644 board/davinci/da8xxevm/u-boot-spl-hawk.lds delete mode 100644 configs/hawkboard_defconfig delete mode 100644 configs/hawkboard_uart_defconfig delete mode 100644 include/configs/hawkboard.h
arch/arm/mach-davinci/Kconfig +0 -4
@@ -21,10 +21,6 @@ config TARGET_CAM_ENC_4XX bool "CAM ENC 4xx board" select SUPPORT_SPL -config TARGET_HAWKBOARD - bool "Hawkboard" - select SUPPORT_SPL - config TARGET_DAVINCI_DM355EVM bool "DM355 EVM board"
board/davinci/da8xxevm/Kconfig +0 -13
@@ -23,16 +23,3 @@ config SYS_CONFIG_NAME default "da850evm" endif - -if TARGET_HAWKBOARD - -config SYS_BOARD - default "da8xxevm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "hawkboard" - -endif
board/davinci/da8xxevm/MAINTAINERS +0 -8
@@ -12,11 +12,3 @@ F: include/configs/da850evm.h F: configs/da850_am18xxevm_defconfig F: configs/da850evm_defconfig F: configs/da850evm_direct_nor_defconfig - -HAWKBOARD BOARD -M: Syed Mohammed Khasim <[email protected]> -M: Sughosh Ganu <[email protected]> -S: Maintained -F: include/configs/hawkboard.h -F: configs/hawkboard_defconfig -F: configs/hawkboard_uart_defconfig
board/davinci/da8xxevm/Makefile +0 -1
@@ -9,4 +9,3 @@ obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += da830evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += da850evm.o -obj-$(CONFIG_MACH_DAVINCI_HAWK) += hawkboard.o
board/davinci/da8xxevm/README.hawkboard deleted +0 -92
92 lines not on this page · raw message
board/davinci/da8xxevm/hawkboard-ais-nand.cfg deleted +0 -4
@@ -1,4 +0,0 @@ -# PLL0CFG0 PLL0CFG1 -PLL0 0x00180001 0x00000205 -# PLL1CFG0 PLL1CFG1 DRPYC1R SDCR SDTIMR1 SDTIMR2 SDRCR CLK2XSRC -DDR2 0x15010001 0x00000002 0x00000043 0x00134632 0x26492a09 0x7d13c722 0x00000249 0x00000000
board/davinci/da8xxevm/hawkboard.c deleted +0 -120
120 lines not on this page · raw message
board/davinci/da8xxevm/u-boot-spl-hawk.lds deleted +0 -69
69 lines not on this page · raw message
configs/hawkboard_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SPL=y -+S:CONFIG_ARM=y -+S:CONFIG_ARCH_DAVINCI=y -+S:CONFIG_TARGET_HAWKBOARD=y
configs/hawkboard_uart_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="UART_U_BOOT" -+S:CONFIG_ARM=y -+S:CONFIG_ARCH_DAVINCI=y -+S:CONFIG_TARGET_HAWKBOARD=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +hawkboard arm arm926ejs - - Syed Mohammed Khasim <[email protected]>:Sughosh Ganu <[email protected]> tnetv107x arm arm1176 - - Chan-Taek Park <[email protected]> a320evb arm arm920t - - Po-Yu Chuang <[email protected]> cm4008 arm arm920t - - Greg Ungerer <[email protected]>
include/configs/hawkboard.h deleted +0 -220
220 lines not on this page · raw message
Signature · 1 line
1.9.1
Fabio Estevam
reviewerv4 cover ARM: remove non-generic boards
In reply to Masahiro YamadaHi Masahiro,
Quoted 19 lines · Masahiro Yamada
Based on Tom's announce mail
(http://lists.denx.de/pipermail/u-boot/2015-February/203606.html),
let's start removing non-generic ARM boards.No conversion patches have been posted for these boards.
Changes in v4:
- Rebase on commit 4641429695Changes in v3:
- Do not remove devkit3250 because Vladimir has post a patch to convert it into Generic Board.Changes in v2:
- Do not remove armada100 boards because Ajay will send a patch to convert them.
Quoted 5 lines
Masahiro Yamada (9):
ARM: remove mx31ads board support
ARM: mx31: removeimx31_phycoreboard
ARM: remove jadecpu board support
ARM: remove zmx25 board support
I have just sent patches converting mx31ads, mx31_phycore and zmx25 to generic board.
Regards,
Fabio Estevam