ARM: omap2plus_defconfig: Fix SATA and NAND for v4.0-rc
Subsystems (2)
cover ARM: omap2plus_defconfig: Fix SATA and NAND for v4.0-rc
Hi,
These changes fix SATA boot and NAND for OMAP based boards.
I must also point out that basic SATA operation is also broken when TI_PIPE3 driver is built as a module. I will be investigating that on lower priority.
--
cheers,
-roger
Roger Quadros (2):
ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver
ARM: omap2plus_defconfig: Fix SATA boot
arch/arm/configs/omap2plus_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Signature · 1 line
2.1.0
PATCH 1/2 ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver
Without this NAND doesn't work on most EVMs.
--- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/configs/omap2plus_defconfig +1 -0
@@ -114,6 +114,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_BCH=y CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_OMAP2=y
Signature · 1 line
2.1.0
PATCH 2/2 ARM: omap2plus_defconfig: Fix SATA boot
In reply to Roger QuadrosSATA operation depends on PIPE3 PHY and if we want to boot from SATA drives, we have to have the PIPE3 PHY driver built-in.
--- arch/arm/configs/omap2plus_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/configs/omap2plus_defconfig +1 -1
@@ -375,7 +375,7 @@ CONFIG_PWM_TIEHRPWM=m CONFIG_PWM_TWL=m CONFIG_PWM_TWL_LED=m CONFIG_OMAP_USB2=m -CONFIG_TI_PIPE3=m +CONFIG_TI_PIPE3=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set
Signature · 1 line
2.1.0
Tony Lindgren
maintainercover ARM: omap2plus_defconfig: Fix SATA and NAND for v4.0-rc
In reply to Roger QuadrosQuoted 7 lines · Roger Quadros
Hi,
These changes fix SATA boot and NAND for OMAP based boards.
I must also point out that basic SATA operation is also broken when
TI_PIPE3driver is built as a module. I will be investigating that on lower priority.
OK applying into omap-for-v4.0/fixes. At some point we're going to make everything use loadable modules and initramfs so best to make sure things work as loadable modules.
Regards,
Tony
Quoted 10 lines
Roger Quadros (2):
ARM:omap2plus_defconfig: Enable OMAP NAND BCH driver
ARM:omap2plus_defconfig: Fix SATA bootarch/arm/configs/omap2plus_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)Signature · 1 line
2.1.0