Add PSCI support for Jetson TK1/Tegra124 + CNTFRQ fix
v3 cover Add PSCI support for Jetson TK1/Tegra124 + CNTFRQ fix
Changes in v3:
- use memory node adjustment for RAM carveout instead of reservation
- style fixes
Find patches also under
https://github.com/siemens/u-boot/tree/jetson-tk1-v3
Jan
Ian Campbell (3):
tegra124: Add more registers to struct mc_ctlr
jetson-tk1: Add PSCI configuration options and reserve secure code
tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0
Jan Kiszka (9):
ARM: Factor out reusable psci_cpu_off_common
ARM: Factor out reusable psci_cpu_entry
ARM: Factor out reusable psci_get_cpu_stack_top
ARM: Put target PC for PSCI CPU_ON on per-CPU stack
virt-dt: Allow reservation of secure region when in a RAM carveout
tegra: Make tegra_powergate_power_on public
tegra: Add ap_pm_init hook
tegra124: Add PSCI support for Tegra124
tegra: Set CNTFRQ for secondary CPUs
arch/arm/cpu/armv7/Makefile | 1 + arch/arm/cpu/armv7/psci.S | 100 ++++++++++++++++++++++++ arch/arm/cpu/armv7/sunxi/psci.S | 108 ++++---------------------- arch/arm/cpu/armv7/tegra-common/Makefile | 1 + arch/arm/cpu/armv7/tegra-common/psci.S | 114 ++++++++++++++++++++++++++++ arch/arm/cpu/armv7/tegra124/Kconfig | 2 + arch/arm/cpu/armv7/tegra124/Makefile | 7 ++ arch/arm/cpu/armv7/tegra124/ap.c | 44 +++++++++++ arch/arm/cpu/armv7/virt-dt.c | 27 +++++++ arch/arm/cpu/armv7/virt-v7.c | 5 ++ arch/arm/cpu/tegra-common/ap.c | 15 ++++ arch/arm/cpu/tegra-common/powergate.c | 2 +- arch/arm/include/asm/arch-tegra/ap.h | 5 ++ arch/arm/include/asm/arch-tegra/powergate.h | 1 + arch/arm/include/asm/arch-tegra124/flow.h | 5 ++ arch/arm/include/asm/arch-tegra124/mc.h | 35 ++++++++- arch/arm/include/asm/armv7.h | 1 + arch/arm/include/asm/system.h | 1 + arch/arm/lib/bootm-fdt.c | 5 ++ board/nvidia/common/board.c | 4 + include/configs/jetson-tk1.h | 5 ++ 21 files changed, 392 insertions(+), 96 deletions(-) create mode 100644 arch/arm/cpu/armv7/tegra-common/psci.S create mode 100644 arch/arm/cpu/armv7/tegra124/Makefile create mode 100644 arch/arm/cpu/armv7/tegra124/ap.c
Signature · 1 line
2.1.4
PATCH v3 1/12 ARM: Factor out reusable psci_cpu_off_common
Move parts of sunxi's psci_cpu_off into psci_cpu_off_common, namely cache disabling and flushing, clrex and the disabling of SMP for the dying CPU. These steps are apparently generic for ARMv7 and will be reused for Tegra124 support.
--- arch/arm/cpu/armv7/psci.S | 71 +++++++++++++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/sunxi/psci.S | 63 +----------------------------------- 2 files changed, 72 insertions(+), 62 deletions(-)
arch/arm/cpu/armv7/psci.S +71 -0
@@ -99,4 +99,75 @@ _smc_psci: pop {r4-r7, lr} movs pc, lr @ Return to the kernel +/* Imported from Linux kernel */ +LENTRY(v7_flush_dcache_all) + dmb @ ensure ordering with previous memory accesses + mrc p15, 1, r0, c0, c0, 1 @ read clidr + ands r3, r0, #0x7000000 @ extract loc from clidr + mov r3, r3, lsr #23 @ left align loc bit field + beq finished @ if loc is 0, then no need to clean + mov r10, #0 @ start clean at cache level 0 +flush_levels: + add r2, r10, r10, lsr #1 @ work out 3x current cache level + mov r1, r0, lsr r2 @ extract cache type bits from clidr + and r1, r1, #7 @ mask of the bits for current cache only + cmp r1, #2 @ see what cache we have at this level + blt skip @ skip if no cache, or just i-cache + mrs r9, cpsr @ make cssr&csidr read atomic + mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr + isb @ isb to sych the new cssr&csidr + mrc p15, 1, r1, c0, c0, 0 @ read the new csidr + msr cpsr_c, r9 + and r2, r1, #7 @ extract the length of the cache lines + add r2, r2, #4 @ add 4 (line length offset) + ldr r4, =0x3ff + ands r4, r4, r1, lsr #3 @ find maximum number on the way size + clz r5, r4 @ find bit position of way size increment + ldr r7, =0x7fff + ands r7, r7, r1, lsr #13 @ extract max number of the index size +loop1: + mov r9, r7 @ create working copy of max index +loop2: + orr r11, r10, r4, lsl r5 @ factor way and cache number into r11 + orr r11, r11, r9, lsl r2 @ factor index number into r11 + mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way + subs r9, r9, #1 @ decrement the index + bge loop2 + subs r4, r4, #1 @ decrement the way + bge loop1 +skip: + add r10, r10, #2 @ increment cache number + cmp r3, r10 + bgt flush_levels +finished: + mov r10, #0 @ swith back to cache level 0 + mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr + dsb st + isb + bx lr +ENDPROC(v7_flush_dcache_all) + +ENTRY(psci_cpu_off_common) + push {lr} + + mrc p15, 0, r0, c1, c0, 0 @ SCTLR + bic r0, r0, #(1 << 2) @ Clear C bit + mcr p15, 0, r0, c1, c0, 0 @ SCTLR + isb + dsb + + bl v7_flush_dcache_all + + clrex @ Why??? + + mrc p15, 0, r0, c1, c0, 1 @ ACTLR + bic r0, r0, #(1 << 6) @ Clear SMP bit + mcr p15, 0, r0, c1, c0, 1 @ ACTLR + isb + dsb + + pop {lr} + bx lr +ENDPROC(psci_cpu_off_common) + .popsection
arch/arm/cpu/armv7/sunxi/psci.S +1 -62
75 lines not on this page · raw message
Signature · 1 line
2.1.4
PATCH v3 2/12 ARM: Factor out reusable psci_cpu_entry
In reply to Jan Kiszka_sunxi_cpu_entry can be converted completely into a reusable psci_cpu_entry. Tegra124 will use it as well.
--- arch/arm/cpu/armv7/psci.S | 19 +++++++++++++++++++ arch/arm/cpu/armv7/sunxi/psci.S | 21 ++------------------- 2 files changed, 21 insertions(+), 19 deletions(-)
arch/arm/cpu/armv7/psci.S +19 -0
@@ -170,4 +170,23 @@ ENTRY(psci_cpu_off_common) bx lr ENDPROC(psci_cpu_off_common) +ENTRY(psci_cpu_entry) + @ Set SMP bit + mrc p15, 0, r0, c1, c0, 1 @ ACTLR + orr r0, r0, #(1 << 6) @ Set SMP bit + mcr p15, 0, r0, c1, c0, 1 @ ACTLR + isb + + bl _nonsec_init + bl psci_arch_init + + adr r0, _psci_target_pc + ldr r0, [r0] + b _do_nonsec_entry +ENDPROC(psci_cpu_entry) + +.globl _psci_target_pc +_psci_target_pc: + .word 0 + .popsection
arch/arm/cpu/armv7/sunxi/psci.S +2 -19
@@ -138,7 +138,7 @@ out: mcr p15, 0, r7, c1, c1, 0 @ r2 = target PC .globl psci_cpu_on psci_cpu_on: - adr r0, _target_pc + ldr r0, =_psci_target_pc str r2, [r0] dsb
@@ -150,7 +150,7 @@ psci_cpu_on: mov r4, #1 lsl r4, r4, r1 - adr r6, _sunxi_cpu_entry + ldr r6, =psci_cpu_entry str r6, [r0, #0x1a4] @ PRIVATE_REG (boot vector) @ Assert reset on target CPU
@@ -196,23 +196,6 @@ psci_cpu_on: mov r0, #ARM_PSCI_RET_SUCCESS @ Return PSCI_RET_SUCCESS mov pc, lr -_target_pc: - .word 0 - -_sunxi_cpu_entry: - @ Set SMP bit - mrc p15, 0, r0, c1, c0, 1 - orr r0, r0, #0x40 - mcr p15, 0, r0, c1, c0, 1 - isb - - bl _nonsec_init - bl psci_arch_init - - adr r0, _target_pc - ldr r0, [r0] - b _do_nonsec_entry - .globl psci_cpu_off psci_cpu_off: bl psci_cpu_off_common
Signature · 1 line
2.1.4
PATCH v3 3/12 ARM: Factor out reusable psci_get_cpu_stack_top
In reply to Jan KiszkaThis algorithm will be useful on Tegra as well, plus we will need it for making _psci_target_pc per-CPU.
--- arch/arm/cpu/armv7/psci.S | 14 ++++++++++++++ arch/arm/cpu/armv7/sunxi/psci.S | 17 +++++++---------- 2 files changed, 21 insertions(+), 10 deletions(-)
arch/arm/cpu/armv7/psci.S +14 -0
@@ -170,6 +170,20 @@ ENTRY(psci_cpu_off_common) bx lr ENDPROC(psci_cpu_off_common) +@ expects CPU ID in r4 (will be overwritten) and returns stack top in r5 +ENTRY(psci_get_cpu_stack_top) + mov r5, #0x400 @ 1kB of stack per CPU + mul r4, r4, r5 + + ldr r5, =psci_text_end @ end of monitor text + add r5, r5, #0x2000 @ Skip two pages + lsr r5, r5, #12 @ Align to start of page + lsl r5, r5, #12 + sub r5, r5, r4 @ here's our stack! + + bx lr +ENDPROC(psci_get_cpu_stack_top) + ENTRY(psci_cpu_entry) @ Set SMP bit mrc p15, 0, r0, c1, c0, 1 @ ACTLR
arch/arm/cpu/armv7/sunxi/psci.S +7 -10
@@ -213,6 +213,8 @@ psci_cpu_off: .globl psci_arch_init psci_arch_init: + mov r6, lr + movw r4, #(GICD_BASE & 0xffff) movt r4, #(GICD_BASE >> 16)
@@ -240,16 +242,11 @@ psci_arch_init: mrc p15, 0, r4, c0, c0, 5 @ MPIDR and r4, r4, #3 @ cpu number in cluster - mov r5, #0x400 @ 1kB of stack per CPU - mul r4, r4, r5 - - adr r5, text_end @ end of text - add r5, r5, #0x2000 @ Skip two pages - lsr r5, r5, #12 @ Align to start of page - lsl r5, r5, #12 - sub sp, r5, r4 @ here's our stack! + bl psci_get_cpu_stack_top + mov sp, r5 - bx lr + bx r6 -text_end: + .globl psci_text_end +psci_text_end: .popsection
Signature · 1 line
2.1.4
PATCH v3 4/12 ARM: Put target PC for PSCI CPU_ON on per-CPU stack
In reply to Jan KiszkaUse a per-CPU variable for saving the target PC during CPU_ON operations. This allows us to run this service independently on targets that have more than 2 cores and also core-local power control.
--- arch/arm/cpu/armv7/psci.S | 8 ++------ arch/arm/cpu/armv7/sunxi/psci.S | 9 ++++++--- 2 files changed, 8 insertions(+), 9 deletions(-)
arch/arm/cpu/armv7/psci.S +2 -6
@@ -179,6 +179,7 @@ ENTRY(psci_get_cpu_stack_top) add r5, r5, #0x2000 @ Skip two pages lsr r5, r5, #12 @ Align to start of page lsl r5, r5, #12 + sub r5, r5, #4 @ reserve 1 word for target PC sub r5, r5, r4 @ here's our stack! bx lr
@@ -194,13 +195,8 @@ ENTRY(psci_cpu_entry) bl _nonsec_init bl psci_arch_init - adr r0, _psci_target_pc - ldr r0, [r0] + ldr r0, [sp] @ target PC at stack top b _do_nonsec_entry ENDPROC(psci_cpu_entry) -.globl _psci_target_pc -_psci_target_pc: - .word 0 - .popsection
arch/arm/cpu/armv7/sunxi/psci.S +6 -3
@@ -138,8 +138,11 @@ out: mcr p15, 0, r7, c1, c1, 0 @ r2 = target PC .globl psci_cpu_on psci_cpu_on: - ldr r0, =_psci_target_pc - str r2, [r0] + push {lr} + + mov r4, r1 + bl psci_get_cpu_stack_top @ get stack top of target CPU + str r2, [r5] @ store target PC at stack top dsb movw r0, #(SUN7I_CPUCFG_BASE & 0xffff)
@@ -194,7 +197,7 @@ psci_cpu_on: str r6, [r0, #0x1e4] mov r0, #ARM_PSCI_RET_SUCCESS @ Return PSCI_RET_SUCCESS - mov pc, lr + pop {pc} .globl psci_cpu_off psci_cpu_off:
Signature · 1 line
2.1.4
PATCH v3 5/12 tegra124: Add more registers to struct mc_ctlr
In reply to Jan KiszkaFrom: Ian Campbell <[email protected]>
I will need mc_security_cfg0/1 in a future patch and I added the rest while debugging, so thought I might as well commit them.
--- arch/arm/include/asm/arch-tegra124/mc.h | 35 +++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-)
arch/arm/include/asm/arch-tegra124/mc.h +33 -2
@@ -35,9 +35,40 @@ struct mc_ctlr {u32 mc_emem_adr_cfg;/* offset 0x54 */ u32 mc_emem_adr_cfg_dev0;/* offset 0x58 */ u32 mc_emem_adr_cfg_dev1;/* offset 0x5C */ -u32 reserved3[12 ];/* offset 0x60 - 0x8C */ +u32 reserved3[4 ];/* offset 0x60 - 0x6C */ +u32 mc_security_cfg0;/* offset 0x70 */ +u32 mc_security_cfg1;/* offset 0x74 */ +u32 reserved4[6 ];/* offset 0x7C - 0x8C */ u32 mc_emem_arb_reserved[28 ];/* offset 0x90 - 0xFC */ -u32 reserved4[338 ];/* offset 0x100 - 0x644 */ +u32 reserved5[74 ];/* offset 0x100 - 0x224 */ +u32 mc_smmu_translation_enable_0;/* offset 0x228 */ +u32 mc_smmu_translation_enable_1;/* offset 0x22C */ +u32 mc_smmu_translation_enable_2;/* offset 0x230 */ +u32 mc_smmu_translation_enable_3;/* offset 0x234 */ +u32 mc_smmu_afi_asid;/* offset 0x238 */ +u32 mc_smmu_avpc_asid;/* offset 0x23C */ +u32 mc_smmu_dc_asid;/* offset 0x240 */ +u32 mc_smmu_dcb_asid;/* offset 0x244 */ +u32 reserved6[2 ];/* offset 0x248 - 0x24C */ +u32 mc_smmu_hc_asid;/* offset 0x250 */ +u32 mc_smmu_hda_asid;/* offset 0x254 */ +u32 mc_smmu_isp2_asid;/* offset 0x258 */ +u32 reserved7[2 ];/* offset 0x25C - 0x260 */ +u32 mc_smmu_msenc_asid;/* offset 0x264 */ +u32 mc_smmu_nv_asid;/* offset 0x268 */ +u32 mc_smmu_nv2_asid;/* offset 0x26C */ +u32 mc_smmu_ppcs_asid;/* offset 0x270 */ +u32 mc_smmu_sata_asid;/* offset 0x274 */ +u32 reserved8[1 ];/* offset 0x278 */ +u32 mc_smmu_vde_asid;/* offset 0x27C */ +u32 mc_smmu_vi_asid;/* offset 0x280 */ +u32 mc_smmu_vic_asid;/* offset 0x284 */ +u32 mc_smmu_xusb_host_asid;/* offset 0x288 */ +u32 mc_smmu_xusb_dev_asid;/* offset 0x28C */ +u32 reserved9[1 ];/* offset 0x290 */ +u32 mc_smmu_tsec_asid;/* offset 0x294 */ +u32 mc_smmu_ppcs1_asid;/* offset 0x298 */ +u32 reserved10[235 ];/* offset 0x29C - 0x644 */ u32 mc_video_protect_bom;/* offset 0x648 */ u32 mc_video_protect_size_mb;/* offset 0x64c */ u32 mc_video_protect_reg_ctrl;/* offset 0x650 */
Signature · 1 line
2.1.4
PATCH v3 6/12 virt-dt: Allow reservation of secure region when in a RAM carveout
In reply to Jan KiszkaIn this case the secure code lives in RAM, and hence the memory node in the device tree needs to be adjusted. This avoids that the OS will map and possibly access the reservation.
Add support for setting CONFIG_ARMV7_SECURE_RESERVE_SIZE to carve out such a region. We only support cutting off memory from the beginning or the end of a RAM bank as we do not want to increase their number (which would happen if punching a hole) for simplicity reasons
This will be used in a subsequent patch for Jetson-TK1.
--- arch/arm/cpu/armv7/virt-dt.c | 27 +++++++++++++++++++++++++++ arch/arm/include/asm/armv7.h | 1 + arch/arm/lib/bootm-fdt.c | 5 +++++ 3 files changed, 33 insertions(+)
arch/arm/cpu/armv7/virt-dt.c +27 -0
@@ -16,6 +16,7 @@*/ #include <common.h> +#include <errno.h> #include <stdio_dev.h> #include <linux/ctype.h> #include <linux/types.h>
@@ -88,6 +89,32 @@ static int fdt_psci(void *fdt)return 0 ; } +int armv7_apply_memory_carveout (u64 *start,u64 *size) +{ +#ifdef CONFIG_ARMV7_SECURE_RESERVE_SIZE +if (*start + *size <CONFIG_ARMV7_SECURE_BASE || + *start >= (u64 )CONFIG_ARMV7_SECURE_BASE + +CONFIG_ARMV7_SECURE_RESERVE_SIZE ) +return 0 ; + +/* carveout must be at the beginning or the end of the bank */ +if (*start ==CONFIG_ARMV7_SECURE_BASE || + *start + *size == (u64 )CONFIG_ARMV7_SECURE_BASE + +CONFIG_ARMV7_SECURE_RESERVE_SIZE ) { +if (*size <CONFIG_ARMV7_SECURE_RESERVE_SIZE ) { +debug ("Secure monitor larger than RAM bank!?\n" ); +return -EINVAL ; + } + *size -=CONFIG_ARMV7_SECURE_RESERVE_SIZE ; +if (*start ==CONFIG_ARMV7_SECURE_BASE ) + *start +=CONFIG_ARMV7_SECURE_RESERVE_SIZE ; +return 0 ; + } +debug ("Secure monitor not located@beginning or end of RAM bank\n" ); +return -EINVAL ; +#endif +} +int armv7_update_dt (void *fdt) {if (!armv7_boot_nonsec ())
arch/arm/include/asm/armv7.h +1 -0
@@ -79,6 +79,7 @@ void v7_outer_cache_inval_range(u32 start, u32 end);#if defined(CONFIG_ARMV7_NONSEC ) || defined(CONFIG_ARMV7_VIRT )int armv7_init_nonsec (void ); +int armv7_apply_memory_carveout (u64 *start,u64 *size);int armv7_update_dt (void *fdt);bool armv7_boot_nonsec (void );
arch/arm/lib/bootm-fdt.c +5 -0
@@ -31,6 +31,11 @@ int arch_fixup_fdt(void *blob)for (bank =0 ; bank <CONFIG_NR_DRAM_BANKS ; bank++) { start[bank] = bd->bi_dram[bank].start; size[bank] = bd->bi_dram[bank].size; +#if defined(CONFIG_ARMV7_NONSEC ) || defined(CONFIG_ARMV7_VIRT ) + ret =armv7_apply_memory_carveout (&start[bank], &size[bank]); +if (ret) +return ret; +#endif } ret =fdt_fixup_memory_banks (blob, start, size,CONFIG_NR_DRAM_BANKS );
Signature · 1 line
2.1.4
PATCH v3 7/12 tegra: Make tegra_powergate_power_on public
In reply to Jan KiszkaWill be used for unpowergating CPUs.
--- arch/arm/cpu/tegra-common/powergate.c | 2 +- arch/arm/include/asm/arch-tegra/powergate.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
arch/arm/cpu/tegra-common/powergate.c +1 -1
@@ -44,7 +44,7 @@ static int tegra_powergate_set(enum tegra_powergate id, bool state)return -ETIMEDOUT ; } -static int tegra_powergate_power_on (enum tegra_powergate id) +int tegra_powergate_power_on (enum tegra_powergate id) {return tegra_powergate_set (id, true); }
arch/arm/include/asm/arch-tegra/powergate.h +1 -0
@@ -33,6 +33,7 @@ enum tegra_powergate {int tegra_powergate_sequence_power_up (enum tegra_powergate id,enum periph_id periph); +int tegra_powergate_power_on (enum tegra_powergate id);int tegra_powergate_power_off (enum tegra_powergate id);#endif
Signature · 1 line
2.1.4
PATCH v3 8/12 tegra: Add ap_pm_init hook
In reply to Jan KiszkaThis function will be used to initialize CPU power management for Tegra SOCs. For now it does nothing.
--- arch/arm/include/asm/arch-tegra/ap.h | 5 +++++ board/nvidia/common/board.c | 4 ++++ 2 files changed, 9 insertions(+)
arch/arm/include/asm/arch-tegra/ap.h +5 -0
@@ -63,6 +63,11 @@ int tegra_get_chip(void);*/ int tegra_get_sku_info (void ); +/** +* Initialize power management for application processors +*/ +void ap_pm_init (void ); +/* Do any chip-specific cache config */ void config_cache (void );
board/nvidia/common/board.c +4 -0
@@ -21,6 +21,7 @@#include <asm/arch/pwm.h> #endif #include <asm/arch/tegra.h> +#include <asm/arch-tegra/ap.h> #include <asm/arch-tegra/board.h> #include <asm/arch-tegra/clk_rst.h> #include <asm/arch-tegra/pmc.h>
@@ -56,6 +57,7 @@ const struct tegra_sysinfo sysinfo = { CONFIG_TEGRA_BOARD_STRING }; +__weak void ap_pm_init (void ) {}__weak void pinmux_init (void ) {}__weak void pin_mux_usb (void ) {}__weak void pin_mux_spi (void ) {}
@@ -96,6 +98,8 @@ int board_init(void)clock_init ();clock_verify (); +ap_pm_init (); +#ifdef CONFIG_TEGRA_SPI pin_mux_spi ();#endif
Signature · 1 line
2.1.4
PATCH v3 9/12 tegra124: Add PSCI support for Tegra124
In reply to Jan KiszkaThis is based on Thierry Reding's work and uses Ian Campell's preparatory patches. It comes with full support for CPU_ON/OFF PSCI services. The algorithm used in this version for turning CPUs on and off was proposed by Thierry Reding in
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/210881. It consists of first enabling CPU1..3 via the PMC, just to powergate them again with the help of the Flow Controller. Once the Flow Controller is in place, we can leave the PMC alone while processing CPU_ON and CPU_OFF PSCI requests.
--- arch/arm/cpu/armv7/Makefile | 1 + arch/arm/cpu/armv7/tegra-common/Makefile | 1 + arch/arm/cpu/armv7/tegra-common/psci.S | 101 ++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/tegra124/Makefile | 7 +++ arch/arm/cpu/armv7/tegra124/ap.c | 44 +++++++++++++ arch/arm/include/asm/arch-tegra124/flow.h | 5 ++ 6 files changed, 159 insertions(+) create mode 100644 arch/arm/cpu/armv7/tegra-common/psci.S create mode 100644 arch/arm/cpu/armv7/tegra124/Makefile create mode 100644 arch/arm/cpu/armv7/tegra124/ap.c
arch/arm/cpu/armv7/Makefile +1 -0
@@ -59,6 +59,7 @@ obj-$(CONFIG_SOCFPGA) += socfpga/ obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_TEGRA20) += tegra20/ +obj-$(CONFIG_TEGRA124) += tegra124/ obj-$(CONFIG_U8500) += u8500/ obj-$(CONFIG_ARCH_UNIPHIER) += uniphier/ obj-$(CONFIG_VF610) += vf610/
arch/arm/cpu/armv7/tegra-common/Makefile +1 -0
@@ -7,4 +7,5 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-$(CONFIG_ARMV7_PSCI) += psci.o obj-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o
arch/arm/cpu/armv7/tegra-common/psci.S new file +101 -0
101 lines not on this page · raw message
arch/arm/cpu/armv7/tegra124/Makefile new file +7 -0
@@ -0,0 +1,7 @@ +# +# (C) Copyright 2015, Siemens AG +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_ARMV7_PSCI) += ap.o
arch/arm/cpu/armv7/tegra124/ap.c new file +44 -0
44 lines not on this page · raw message
arch/arm/include/asm/arch-tegra124/flow.h +5 -0
@@ -37,4 +37,9 @@ struct flow_ctlr {/* FLOW_CTLR_CLUSTER_CONTROL_0 0x2c */ #define ACTIVE_LP (1 << 0) +/* CPUn_CSR_0 */ +#define CSR_ENABLE (1 << 0) +#define CSR_IMMEDIATE_WAKE (1 << 3) +#define CSR_WAIT_WFI_SHIFT 8 +#endif /* _TEGRA124_FLOW_H_ */
Signature · 1 line
2.1.4
PATCH v3 9/12 tegra124: Add PSCI support for Tegra124
On Wed, Feb 18, 2015 at 09:14:03AM +0100, Jan Kiszka wrote:
[...]
arch/arm/cpu/armv7/tegra-common/psci.S line 70
Quoted 11 lines
arch/arm/cpu/armv7/tegra-common/psci.S new file +11
-0+ENTRY(psci_cpu_off) + bl psci_cpu_off_common + + mrc p15, 0, r1, c0, c0, 5 @ MPIDR + and r1, r1, #7 @ number of CPUs in cluster + + get_csr_reg r1, r2, r3 + + ldr r6, =TEGRA_FLOW_CTRL_BASE + mov r5, #(CSR_ENABLE) + add r5, r1, lsl #CSR_WAIT_WFI_SHIFT
This puts the wrong value into the WAIT_WFI field. The value of that field is supposed to be a mask, not the index of the CPU. I've used this to fix it:
mov r4, #(1 << CSR_WAIT_WFI_SHIFT) add r5, r4, lsl r1
With that fixed I see that with CPU hotplugging the power partition for the CPU that's taken offline is gated. To verify:
# cat /sys/kernel/debug/powergate # echo 0 > /sys/devices/system/cpu/cpu1/online # cat /sys/kernel/debug/powergate
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150226/3fc891ff/attachment.sig>
PATCH v3 9/12 tegra124: Add PSCI support for Tegra124
Quoted 21 lines · Thierry Reding
On Wed, Feb 18, 2015 at 09:14:03AM +0100, Jan Kiszka wrote:
[...]arch/arm/cpu/armv7/tegra-common/psci.S line 70
Quoted 11 lines
arch/arm/cpu/armv7/tegra-common/psci.S new file +11
-0+ENTRY(psci_cpu_off) + bl psci_cpu_off_common + + mrc p15, 0, r1, c0, c0, 5 @ MPIDR + and r1, r1, #7 @ number of CPUs in cluster + + get_csr_reg r1, r2, r3 + + ldr r6, =TEGRA_FLOW_CTRL_BASE + mov r5, #(CSR_ENABLE) + add r5, r1, lsl #CSR_WAIT_WFI_SHIFTThis puts the wrong value into the
WAIT_WFIfield. The value of that field is supposed to be a mask, not the index of the CPU. I've used this to fix it:mov r4, #(1 << CSR_WAIT_WFI_SHIFT) add r5, r4, lsl r1
Quoted 6 lines
With that fixed I see that with CPU hotplugging the power partition for the CPU that's taken offline is gated. To verify:
# cat /sys/kernel/debug/powergate # echo 0 > /sys/devices/system/cpu/cpu1/online # cat /sys/kernel/debug/powergate
Ah, good catch. Will include your fix.
Jan
Signature · 2 lines
Siemens AG, Corporate Technology, CT RTC ITP SES-DE Corporate Competence Center Embedded Linux
PATCH v3 9/12 tegra124: Add PSCI support for Tegra124
In reply to Jan KiszkaOn Wed, Feb 18, 2015 at 09:14:03AM +0100, Jan Kiszka wrote:
[...]
Quoted 1 line
arch/arm/cpu/armv7/tegra124/ap.c +0
-0
[...]
Quoted 14 lines
arch/arm/cpu/armv7/tegra124/ap.c +14
-0+void ap_pm_init (void ) +{ +struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE ; +struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE ; + +writel ((u32 )park_cpu,EXCEP_VECTOR_CPU_RESET_VECTOR ); + +tegra_powergate_power_on (TEGRA_POWERGATE_CPU1 ); +tegra_powergate_power_on (TEGRA_POWERGATE_CPU2 ); +tegra_powergate_power_on (TEGRA_POWERGATE_CPU3 ); + +writel ((2 <<CSR_WAIT_WFI_SHIFT ) |CSR_ENABLE , &flow->cpu1_csr); +writel ((4 <<CSR_WAIT_WFI_SHIFT ) |CSR_ENABLE , &flow->cpu2_csr); +writel ((8 <<CSR_WAIT_WFI_SHIFT ) |CSR_ENABLE , &flow->cpu3_csr);
arch/arm/cpu/armv7/tegra124/ap.c line 44
Quoted 10 lines
arch/arm/cpu/armv7/tegra124/ap.c +10
-0+ +writel (EVENT_MODE_STOP , &flow->halt_cpu1_events); +writel (EVENT_MODE_STOP , &flow->halt_cpu2_events); +writel (EVENT_MODE_STOP , &flow->halt_cpu3_events); + +while (readl (&pmc->pmc_pwrgate_status) & ((1 <<TEGRA_POWERGATE_CPU1 ) | + (1 <<TEGRA_POWERGATE_CPU2 ) | + (1 <<TEGRA_POWERGATE_CPU3 ))) +/* wait */ ; +}
As discussed previously I don't quite understand why the sequence:
1) program CSR registers
2) program halt events
3) power on CPUs
does not work. Testing shows that PSCI will work with that sequence once the kernel is loaded. However I can also confirm that U-Boot doesn't see the power partition status updated to "off", so I assume the partitions will indeed still be powered on if we change the sequence.
So until we find out why that's happening I think it's safe to go with the above sequence, since it does what we want. Perhaps add a comment describing the ambiguity?
Also as a cosmetic cleanup, perhaps rather than checking the PMC power gate status register you check bit 16 of each CPU's CSR register, which should mirror the corresponding power gate status bit. That way you don't need to access the PMC registers but restrict register accesses to a single IP block in this code.
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150226/d99451b0/attachment.sig>
PATCH v3 10/12 jetson-tk1: Add PSCI configuration options and reserve secure code
In reply to Jan KiszkaFrom: Ian Campbell <[email protected]>
The secure world code is relocated to the MB just below the top of 4G, we reserve it in the FDT (by setting CONFIG_ARMV7_SECURE_RESERVE_SIZE) but it is not protected in h/w. See next patch.
--- arch/arm/cpu/armv7/tegra124/Kconfig | 2 ++ include/configs/jetson-tk1.h | 5 +++++ 2 files changed, 7 insertions(+)
arch/arm/cpu/armv7/tegra124/Kconfig +2 -0
@@ -5,6 +5,8 @@ choice config TARGET_JETSON_TK1 bool "NVIDIA Tegra124 Jetson TK1 board" + select CPU_V7_HAS_NONSEC if !SPL_BUILD + select CPU_V7_HAS_VIRT if !SPL_BUILD config TARGET_NYAN_BIG bool "Google/NVIDIA Nyan-big Chrombook"
include/configs/jetson-tk1.h +5 -0
@@ -81,4 +81,9 @@#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" +#define CONFIG_ARMV7_PSCI 1 +/* Reserve top 1M for secure RAM */ +#define CONFIG_ARMV7_SECURE_BASE 0xfff00000 +#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000 +#endif /* __CONFIG_H */
Signature · 1 line
2.1.4
PATCH v3 11/12 tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0
In reply to Jan KiszkaFrom: Ian Campbell <[email protected]>
These registers can be used to prevent non-secure world from accessing a megabyte aligned region of RAM, use them to protect the u-boot secure monitor code.
At first I tried to do this from s_init(), however this inexplicably causes u-boot's networking (e.g. DHCP) to fail, while networking under Linux was fine.
So instead I have added a new weak arch function protect_secure_section() called from relocate_secure_section() and reserved the region there. This is better overall since it defers the reservation until after the sec vs. non-sec decision (which can be influenced by an envvar) has been made when booting the os.
--- arch/arm/cpu/armv7/virt-v7.c | 5 +++++ arch/arm/cpu/tegra-common/ap.c | 15 +++++++++++++++ arch/arm/include/asm/system.h | 1 + 3 files changed, 21 insertions(+)
arch/arm/cpu/armv7/virt-v7.c +5 -0
@@ -46,6 +46,10 @@ static unsigned long get_gicd_base_address(void)#endif } +/* Define a specific version of this function to enable any available +* hardware protections for the reserved region */ +void __weak protect_secure_section (void ) {} +static void relocate_secure_section (void ) {#ifdef CONFIG_ARMV7_SECURE_BASE
@@ -54,6 +58,7 @@ static void relocate_secure_section(void)memcpy ((void *)CONFIG_ARMV7_SECURE_BASE , __secure_start, sz);flush_dcache_range (CONFIG_ARMV7_SECURE_BASE ,CONFIG_ARMV7_SECURE_BASE + sz +1 ); +protect_secure_section ();invalidate_icache_all ();#endif }
arch/arm/cpu/tegra-common/ap.c +15 -0
@@ -10,6 +10,7 @@#include <common.h> #include <asm/io.h> #include <asm/arch/gp_padctrl.h> +#include <asm/arch/mc.h> #include <asm/arch-tegra/ap.h> #include <asm/arch-tegra/clock.h> #include <asm/arch-tegra/fuse.h>
@@ -154,6 +155,20 @@ static void init_pmc_scratch(void)writel (odmdata, &pmc->pmc_scratch20); } +#ifdef CONFIG_ARMV7_SECURE_RESERVE_SIZE +void protect_secure_section (void ) +{ +struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE ; + +/* Must be MB aligned */ +BUILD_BUG_ON (CONFIG_ARMV7_SECURE_BASE &0xFFFFF ); +BUILD_BUG_ON (CONFIG_ARMV7_SECURE_RESERVE_SIZE &0xFFFFF ); + +writel (CONFIG_ARMV7_SECURE_BASE , &mc->mc_security_cfg0); +writel (CONFIG_ARMV7_SECURE_RESERVE_SIZE >>20 , &mc->mc_security_cfg1); +} +#endif +void s_init (void ) {/* Init PMC scratch memory */
arch/arm/include/asm/system.h +1 -0
@@ -76,6 +76,7 @@ void armv8_switch_to_el1(void);void gic_init (void );void gic_send_sgi (unsigned long sgino);void wait_for_wakeup (void ); +void protect_secure_region (void );void smp_kick_all_cpus (void );void flush_l3_cache (void );
Signature · 1 line
2.1.4
PATCH v3 12/12 tegra: Set CNTFRQ for secondary CPUs
In reply to Jan KiszkaWe only set CNTFRQ in arch_timer_init for the boot CPU. But this has to happen for all cores.
Fixing this resolves problems of KVM with emulating the generic timer/counter.
--- arch/arm/cpu/armv7/tegra-common/psci.S | 13 +++++++++++++ 1 file changed, 13 insertions(+)
arch/arm/cpu/armv7/tegra-common/psci.S +13 -0
@@ -51,12 +51,25 @@ ENTRY(psci_arch_init) mrc p15, 0, r4, c0, c0, 5 @ MPIDR and r4, r4, #7 @ number of CPUs in cluster + + adr r5, _sys_clock_freq + cmp r4, #0 + + mrceq p15, 0, r7, c14, c0, 0 @ read CNTFRQ from CPU0 + streq r7, [r5] + + ldrne r7, [r5] + mcrne p15, 0, r7, c14, c0, 0 @ write CNTFRQ to CPU1..3 + bl psci_get_cpu_stack_top mov sp, r5 bx r6 ENDPROC(psci_arch_init) +_sys_clock_freq: + .word + ENTRY(psci_cpu_off) bl psci_cpu_off_common
Signature · 1 line
2.1.4