perf/kvm: perf-kvm-stat on powerpc
Subsystems (3)
cover perf/kvm: perf-kvm-stat on powerpc
perf kvm stat record/report which can be used to analyze KVM related statistics isn't enabled on powerpc. This patchset enables "perf kvm stat" on powerpc. The first patch enables perf kvm stat record and report to report kvm exits.
"record" enables recording of the tracepoints: kvm_hv:kvm_guest_enter and kvm_hv:kvm_guest_exit in the first patch and kvm_hv:kvm_hcall_enter and kvm_hv:kvm_hcall_exit in the second patch.
This command can be used to record kvm events on the host:
# perf kvm stat record -a
To report the kvm guest related exit events, use:
# perf kvm stat report or # perf kvm stat report --event=vmexit
This should show the exit events along with the exit reasons.
The second patch in this series adds support to show the hcall events too with:
# perf kvm stat report --event=syscall
---
Hemant Kumar (1):
perf/kvm: perf-kvm-stat to report syscalls
Srikar Dronamraju (1):
perf/kvm: Enable perf-kvm-stat record/report on powerpc
arch/powerpc/include/asm/hvcall.h | 120 ------------------------- arch/powerpc/include/uapi/asm/hcall_codes.h | 123 ++++++++++++++++++++++++++ arch/powerpc/include/uapi/asm/kvm_perf.h | 19 ++++ arch/powerpc/include/uapi/asm/trace_book3s.h | 33 +++++++ arch/powerpc/include/uapi/asm/trace_hcall.h | 122 ++++++++++++++++++++++++++ arch/powerpc/kvm/trace_book3s.h | 32 ------- arch/powerpc/kvm/trace_hv.h | 119 ------------------------- arch/powerpc/kvm/trace_pr.h | 2 tools/perf/arch/powerpc/Makefile | 1 tools/perf/arch/powerpc/util/Build | 1 tools/perf/arch/powerpc/util/kvm-stat.c | 94 ++++++++++++++++++++ 11 files changed, 398 insertions(+), 268 deletions(-) create mode 100644 arch/powerpc/include/uapi/asm/hcall_codes.h create mode 100644 arch/powerpc/include/uapi/asm/kvm_perf.h create mode 100644 arch/powerpc/include/uapi/asm/trace_book3s.h create mode 100644 arch/powerpc/include/uapi/asm/trace_hcall.h delete mode 100644 arch/powerpc/kvm/trace_book3s.h create mode 100644 tools/perf/arch/powerpc/util/kvm-stat.c
--
PATCH 1/2 perf/kvm: Enable perf-kvm-stat record/report on powerpc
From: Srikar Dronamraju <[email protected]>
perf kvm stat record/report isn't supported on powerpc.
This patch enables perf to record kvm events (kvm_hv:kvm_guest_entry and exit) and to display the stats related to the events.
When "perf kvm stat record -a" is invoked, the kvm_hv related tracepoints kvm_hv:kvm_guest_enter (defined as KVM_ENTRY_TRACE) and kvm_hv:kvm_guest_exit (defined as KVM_EXIT_TRACE) are enabled. All these data are dumped to perf.data.guest file.
After recording, use "perf kvm stat report" to view the vm exit related stats which shows how many times, the VM exited from guest to host/hypervisor mode. All these exits are grouped as per their reasons to exit. The exit reasons are defined in "kvm_trace_symbol_exit".
The reasons related to kvm_exits, hcalls, etc were previously defined in arch/powerpc/kvm/trace_book3s.h. To reuse all the reasons defined there, this patch moves the exit_reasons arch/powerpc/include/uapi/asm/trace_book3s.h.
This patch defines the tracepoint events "kvm_hv:kvm_guest_exit" and "kvm_hv:kvm_guest_enter" to be sampled and registers the exit events' operations.
Here is a sample o/p:
# pgrep qemu 19378 60515
# perf kvm stat record -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 4.153 MB perf.data.guest (39624 samples) ]
# perf kvm stat report -p 60515
Analyze events for pid(s) 60515, all VCPUs:
VM-EXIT Samples Samples% Time% Min Time Max Time Avg time
H_DATA_STORAGE 5006 35.30% 0.13% 1.94us 49.46us 12.37us ( +- 0.52% )
HV_DECREMENTER 4457 31.43% 0.02% 0.72us 16.14us 1.91us ( +- 0.96% )
SYSCALL 2690 18.97% 0.10% 2.84us 528.24us 18.29us ( +- 3.75% )
RETURN_TO_HOST 1789 12.61% 99.76% 1.58us 672791.91us 27470.23us ( +- 3.00% )
EXTERNAL 240 1.69% 0.00% 0.69us 10.67us 1.33us ( +- 5.34% )Total Samples:14182, Total events handled time:49264158.30us.
--- arch/powerpc/include/uapi/asm/kvm_perf.h | 15 ++++++++++++ arch/powerpc/include/uapi/asm/trace_book3s.h | 33 ++++++++++++++++++++++++++ arch/powerpc/kvm/trace_book3s.h | 32 ------------------------- arch/powerpc/kvm/trace_hv.h | 2 +- arch/powerpc/kvm/trace_pr.h | 2 +- tools/perf/arch/powerpc/Makefile | 1 + tools/perf/arch/powerpc/util/Build | 1 + tools/perf/arch/powerpc/util/kvm-stat.c | 33 ++++++++++++++++++++++++++ 8 files changed, 85 insertions(+), 34 deletions(-) create mode 100644 arch/powerpc/include/uapi/asm/kvm_perf.h create mode 100644 arch/powerpc/include/uapi/asm/trace_book3s.h delete mode 100644 arch/powerpc/kvm/trace_book3s.h create mode 100644 tools/perf/arch/powerpc/util/kvm-stat.c
arch/powerpc/include/uapi/asm/kvm_perf.h new file +15 -0
@@ -0,0 +1,15 @@ +#ifndef _ASM_POWERPC_KVM_PERF_H +#define _ASM_POWERPC_KVM_PERF_H + +#include <asm/trace_book3s.h> +#include <asm/kvm.h> + +#define DECODE_STR_LEN 20 + +#define VCPU_ID "vcpu_id" + +#define KVM_ENTRY_TRACE "kvm_hv:kvm_guest_enter" +#define KVM_EXIT_TRACE "kvm_hv:kvm_guest_exit" +#define KVM_EXIT_REASON "trap" + +#endif /* _ASM_POWERPC_KVM_PERF_H */
arch/powerpc/include/uapi/asm/trace_book3s.h new file +33 -0
@@ -0,0 +1,33 @@ +#if !defined(_TRACE_KVM_BOOK3S_H) +#define _TRACE_KVM_BOOK3S_H + +/* +* Common defines used by the trace macros in trace_pr.h and trace_hv.h +*/ + +#define kvm_trace_symbol_exit \ + {0x0, "RETURN_TO_HOST"}, \ + {0x100, "SYSTEM_RESET"}, \ + {0x200, "MACHINE_CHECK"}, \ + {0x300, "DATA_STORAGE"}, \ + {0x380, "DATA_SEGMENT"}, \ + {0x400, "INST_STORAGE"}, \ + {0x480, "INST_SEGMENT"}, \ + {0x500, "EXTERNAL"}, \ + {0x501, "EXTERNAL_LEVEL"}, \ + {0x502, "EXTERNAL_HV"}, \ + {0x600, "ALIGNMENT"}, \ + {0x700, "PROGRAM"}, \ + {0x800, "FP_UNAVAIL"}, \ + {0x900, "DECREMENTER"}, \ + {0x980, "HV_DECREMENTER"}, \ + {0xc00, "SYSCALL"}, \ + {0xd00, "TRACE"}, \ + {0xe00, "H_DATA_STORAGE"}, \ + {0xe20, "H_INST_STORAGE"}, \ + {0xe40, "H_EMUL_ASSIST"}, \ + {0xf00, "PERFMON"}, \ + {0xf20, "ALTIVEC"}, \ + {0xf40, "VSX"} + +#endif
arch/powerpc/kvm/trace_book3s.h deleted +0 -32
@@ -1,32 +0,0 @@ -#if !defined(_TRACE_KVM_BOOK3S_H) -#define _TRACE_KVM_BOOK3S_H - -/* -* Common defines used by the trace macros in trace_pr.h and trace_hv.h -*/ - -#define kvm_trace_symbol_exit \ - {0x100, "SYSTEM_RESET"}, \ - {0x200, "MACHINE_CHECK"}, \ - {0x300, "DATA_STORAGE"}, \ - {0x380, "DATA_SEGMENT"}, \ - {0x400, "INST_STORAGE"}, \ - {0x480, "INST_SEGMENT"}, \ - {0x500, "EXTERNAL"}, \ - {0x501, "EXTERNAL_LEVEL"}, \ - {0x502, "EXTERNAL_HV"}, \ - {0x600, "ALIGNMENT"}, \ - {0x700, "PROGRAM"}, \ - {0x800, "FP_UNAVAIL"}, \ - {0x900, "DECREMENTER"}, \ - {0x980, "HV_DECREMENTER"}, \ - {0xc00, "SYSCALL"}, \ - {0xd00, "TRACE"}, \ - {0xe00, "H_DATA_STORAGE"}, \ - {0xe20, "H_INST_STORAGE"}, \ - {0xe40, "H_EMUL_ASSIST"}, \ - {0xf00, "PERFMON"}, \ - {0xf20, "ALTIVEC"}, \ - {0xf40, "VSX"} - -#endif
arch/powerpc/kvm/trace_hv.h +1 -1
@@ -2,7 +2,7 @@#define _TRACE_KVM_HV_H#include <linux/tracepoint.h> -#include "trace_book3s.h" +#include <uapi/asm/trace_book3s.h> #include <asm/hvcall.h> #include <asm/kvm_asm.h>
arch/powerpc/kvm/trace_pr.h +1 -1
@@ -3,7 +3,7 @@#define _TRACE_KVM_PR_H#include <linux/tracepoint.h> -#include "trace_book3s.h" +#include <uapi/asm/trace_book3s.h> #undef TRACE_SYSTEM#define TRACE_SYSTEM kvm_pr
tools/perf/arch/powerpc/Makefile +1 -0
@@ -1,3 +1,4 @@ ifndef NO_DWARF PERF_HAVE_DWARF_REGS := 1 endif +HAVE_KVM_STAT_SUPPORT := 1
tools/perf/arch/powerpc/util/Build +1 -0
@@ -1,4 +1,5 @@ libperf-y += header.o +libperf-y += kvm-stat.o libperf-$(CONFIG_DWARF) += dwarf-regs.o libperf-$(CONFIG_DWARF) += skip-callchain-idx.o
tools/perf/arch/powerpc/util/kvm-stat.c new file +33 -0
@@ -0,0 +1,33 @@ +#include "../../util/kvm-stat.h" +#include <asm/kvm_perf.h> + +define_exit_reasons_table (hv_exit_reasons, kvm_trace_symbol_exit); + +static struct kvm_events_ops exit_events = { + .is_begin_event = exit_event_begin, + .is_end_event = exit_event_end, + .decode_key = exit_event_decode_key, + .name ="VM-EXIT" +}; + +const char *const kvm_events_tp[] = { +"kvm_hv:kvm_guest_exit" , +"kvm_hv:kvm_guest_enter" , +NULL , +}; + +struct kvm_reg_events_ops kvm_reg_events_ops[] = { + { .name ="vmexit" , .ops = &exit_events }, + {NULL ,NULL }, +}; + +const char *const kvm_skip_events[] = { +NULL , +}; + +int cpu_isa_init (struct perf_kvm_stat *kvm,const char *cpuid__maybe_unused ) +{ + kvm->exit_reasons = hv_exit_reasons; + kvm->exit_reasons_isa ="HV" ; +return 0 ; +}
PATCH 2/2 perf/kvm: perf-kvm-stat to report syscalls
In reply to Hemant KumarSome of the kvm_hv exits are due to hcalls. So, this patch adds necessary support to display the number of hcalls grouped according to their type (H_IPI, H_CONFER, etc) with "perf kvm stat report --event=syscall".
The patch defines the reasons in "kvm_trace_symbol_hcall". It adds kvm_hv:kvm_hcall_enter tracepoint to be recorded when
"perf kvm stat record" is invoked. It defines the handler functions to handle a kvm_hcall_enter event sample from the samples recorded in perf.data.guest.
To reuse the pSeries hypervisor opcodes, they codes are removed from arch/powerpc/include/asm/hvcall.h and added to a new .h file in arch/powerpc/include/uapi/asm/hcall_codes.h.
Also the hcall_code to hcall_reason string mapping is removed from arch/powerpc/kvm/trace_hv.h to a new file arch/powerpc/include/uapi/asm/trace_hcall.h
so that perf in the userspace can use them.
A sample output :
# pgrep qemu 19378 60515
# ./perf kvm stat record -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 4.153 MB perf.data.guest (39624 samples) ]
# ./perf kvm stat report -p 60515 --event=syscall
Analyze events for pid(s) 60515, all VCPUs:
SYSCALL-EVENT Samples Samples% Time% Min Time Max Time Avg time
H_VIO_SIGNAL 1034 38.44% 15.77% 0.36us 1.59us 0.44us ( +- 0.66% )
H_SEND_CRQ 652 24.24% 10.97% 0.39us 1.84us 0.49us ( +- 1.20% )
H_IPI 523 19.44% 62.05% 1.35us 19.70us 3.44us ( +- 2.88% )
H_PUT_TERM_CHAR 411 15.28% 8.03% 0.38us 3.77us 0.57us ( +- 1.61% )
H_GET_TERM_CHAR 50 1.86% 0.99% 0.40us 0.98us 0.57us ( +- 3.37% )
H_EOI 20 0.74% 2.19% 2.22us 4.72us 3.17us ( +- 5.96% )Total Samples:2690, Total events handled time:2896.94us.
--- arch/powerpc/include/asm/hvcall.h | 120 -------------------------- arch/powerpc/include/uapi/asm/hcall_codes.h | 123 +++++++++++++++++++++++++++ arch/powerpc/include/uapi/asm/kvm_perf.h | 4 + arch/powerpc/include/uapi/asm/trace_hcall.h | 122 +++++++++++++++++++++++++++ arch/powerpc/kvm/trace_hv.h | 117 -------------------------- tools/perf/arch/powerpc/util/kvm-stat.c | 61 +++++++++++++ 6 files changed, 313 insertions(+), 234 deletions(-) create mode 100644 arch/powerpc/include/uapi/asm/hcall_codes.h create mode 100644 arch/powerpc/include/uapi/asm/trace_hcall.h
arch/powerpc/include/asm/hvcall.h +2 -118
@@ -155,124 +155,8 @@/* Each control block has to be on a 4K boundary */ #define H_CB_ALIGNMENT 4096 -/* pSeries hypervisor opcodes */ -#define H_REMOVE 0x04 -#define H_ENTER 0x08 -#define H_READ 0x0c -#define H_CLEAR_MOD 0x10 -#define H_CLEAR_REF 0x14 -#define H_PROTECT 0x18 -#define H_GET_TCE 0x1c -#define H_PUT_TCE 0x20 -#define H_SET_SPRG0 0x24 -#define H_SET_DABR 0x28 -#define H_PAGE_INIT 0x2c -#define H_SET_ASR 0x30 -#define H_ASR_ON 0x34 -#define H_ASR_OFF 0x38 -#define H_LOGICAL_CI_LOAD 0x3c -#define H_LOGICAL_CI_STORE 0x40 -#define H_LOGICAL_CACHE_LOAD 0x44 -#define H_LOGICAL_CACHE_STORE 0x48 -#define H_LOGICAL_ICBI 0x4c -#define H_LOGICAL_DCBF 0x50 -#define H_GET_TERM_CHAR 0x54 -#define H_PUT_TERM_CHAR 0x58 -#define H_REAL_TO_LOGICAL 0x5c -#define H_HYPERVISOR_DATA 0x60 -#define H_EOI 0x64 -#define H_CPPR 0x68 -#define H_IPI 0x6c -#define H_IPOLL 0x70 -#define H_XIRR 0x74 -#define H_PERFMON 0x7c -#define H_MIGRATE_DMA 0x78 -#define H_REGISTER_VPA 0xDC -#define H_CEDE 0xE0 -#define H_CONFER 0xE4 -#define H_PROD 0xE8 -#define H_GET_PPP 0xEC -#define H_SET_PPP 0xF0 -#define H_PURR 0xF4 -#define H_PIC 0xF8 -#define H_REG_CRQ 0xFC -#define H_FREE_CRQ 0x100 -#define H_VIO_SIGNAL 0x104 -#define H_SEND_CRQ 0x108 -#define H_COPY_RDMA 0x110 -#define H_REGISTER_LOGICAL_LAN 0x114 -#define H_FREE_LOGICAL_LAN 0x118 -#define H_ADD_LOGICAL_LAN_BUFFER 0x11C -#define H_SEND_LOGICAL_LAN 0x120 -#define H_BULK_REMOVE 0x124 -#define H_MULTICAST_CTRL 0x130 -#define H_SET_XDABR 0x134 -#define H_STUFF_TCE 0x138 -#define H_PUT_TCE_INDIRECT 0x13C -#define H_CHANGE_LOGICAL_LAN_MAC 0x14C -#define H_VTERM_PARTNER_INFO 0x150 -#define H_REGISTER_VTERM 0x154 -#define H_FREE_VTERM 0x158 -#define H_RESET_EVENTS 0x15C -#define H_ALLOC_RESOURCE 0x160 -#define H_FREE_RESOURCE 0x164 -#define H_MODIFY_QP 0x168 -#define H_QUERY_QP 0x16C -#define H_REREGISTER_PMR 0x170 -#define H_REGISTER_SMR 0x174 -#define H_QUERY_MR 0x178 -#define H_QUERY_MW 0x17C -#define H_QUERY_HCA 0x180 -#define H_QUERY_PORT 0x184 -#define H_MODIFY_PORT 0x188 -#define H_DEFINE_AQP1 0x18C -#define H_GET_TRACE_BUFFER 0x190 -#define H_DEFINE_AQP0 0x194 -#define H_RESIZE_MR 0x198 -#define H_ATTACH_MCQP 0x19C -#define H_DETACH_MCQP 0x1A0 -#define H_CREATE_RPT 0x1A4 -#define H_REMOVE_RPT 0x1A8 -#define H_REGISTER_RPAGES 0x1AC -#define H_DISABLE_AND_GETC 0x1B0 -#define H_ERROR_DATA 0x1B4 -#define H_GET_HCA_INFO 0x1B8 -#define H_GET_PERF_COUNT 0x1BC -#define H_MANAGE_TRACE 0x1C0 -#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 -#define H_QUERY_INT_STATE 0x1E4 -#define H_POLL_PENDING 0x1D8 -#define H_ILLAN_ATTRIBUTES 0x244 -#define H_MODIFY_HEA_QP 0x250 -#define H_QUERY_HEA_QP 0x254 -#define H_QUERY_HEA 0x258 -#define H_QUERY_HEA_PORT 0x25C -#define H_MODIFY_HEA_PORT 0x260 -#define H_REG_BCMC 0x264 -#define H_DEREG_BCMC 0x268 -#define H_REGISTER_HEA_RPAGES 0x26C -#define H_DISABLE_AND_GET_HEA 0x270 -#define H_GET_HEA_INFO 0x274 -#define H_ALLOC_HEA_RESOURCE 0x278 -#define H_ADD_CONN 0x284 -#define H_DEL_CONN 0x288 -#define H_JOIN 0x298 -#define H_VASI_STATE 0x2A4 -#define H_ENABLE_CRQ 0x2B0 -#define H_GET_EM_PARMS 0x2B8 -#define H_SET_MPP 0x2D0 -#define H_GET_MPP 0x2D4 -#define H_HOME_NODE_ASSOCIATIVITY 0x2EC -#define H_BEST_ENERGY 0x2F4 -#define H_XIRR_X 0x2FC -#define H_RANDOM 0x300 -#define H_COP 0x304 -#define H_GET_MPP_X 0x314 -#define H_SET_MODE 0x31C -#define MAX_HCALL_OPCODE H_SET_MODE - -/* Platform specific hcalls, used by KVM */ -#define H_RTAS 0xf000 +/* include pSeries hypervisor opcodes */ +#include <uapi/asm/hcall_codes.h> /* "Platform specific hcalls", provided by PHYP */ #define H_GET_24X7_CATALOG_PAGE 0xF078
arch/powerpc/include/uapi/asm/hcall_codes.h new file +123 -0
123 lines not on this page · raw message
arch/powerpc/include/uapi/asm/kvm_perf.h +4 -0
@@ -3,6 +3,7 @@#include <asm/trace_book3s.h> #include <asm/kvm.h> +#include <asm/trace_hcall.h> #define DECODE_STR_LEN 20
@@ -11,5 +12,8 @@#define KVM_ENTRY_TRACE "kvm_hv:kvm_guest_enter"#define KVM_EXIT_TRACE "kvm_hv:kvm_guest_exit"#define KVM_EXIT_REASON "trap" +#define KVM_HCALL_ENTRY_TRACE "kvm_hv:kvm_hcall_enter" +#define KVM_HCALL_EXIT_TRACE "kvm_hv:kvm_hcall_exit" +#define KVM_HCALL_REASON "req"#endif /* _ASM_POWERPC_KVM_PERF_H */
arch/powerpc/include/uapi/asm/trace_hcall.h new file +122 -0
122 lines not on this page · raw message
arch/powerpc/kvm/trace_hv.h +1 -116
129 lines not on this page · raw message
tools/perf/arch/powerpc/util/kvm-stat.c +61 -0
82 lines not on this page · raw message
Hi Michael,
These patches were posted a month back. We don't have any review comments to handle at this time. Can you pull these patches to your tree? Please, do let me know if you want me to rebase these patches to a different tree (like Arnaldo's/tip etc).
Quoted 55 lines · Hemant Kumar
perf kvm stat record/report which can be used to analyze KVM related statistics isn't enabled on powerpc. This patchset enables "perf kvm stat" on powerpc. The first patch enables perf kvm stat record and report to report kvm exits.
"record" enables recording of the tracepoints: kvm_hv:kvm_guest_enter and kvm_hv:kvm_guest_exit in the first patch and kvm_hv:kvm_hcall_enter and kvm_hv:kvm_hcall_exit in the second patch.
This command can be used to record kvm events on the host:
# perf kvm stat record -aTo report the kvm guest related exit events, use:
# perf kvm stat report or # perf kvm stat report --event=vmexitThis should show the exit events along with the exit reasons.
The second patch in this series adds support to show the hcall events too with:
# perf kvm stat report --event=syscall---
Hemant Kumar (1):
perf/kvm: perf-kvm-stat to report syscallsSrikar Dronamraju (1):
perf/kvm: Enable perf-kvm-stat record/report on powerpcarch/powerpc/include/asm/hvcall.h | 120 ------------------------- arch/powerpc/include/uapi/asm/hcall_codes.h | 123 ++++++++++++++++++++++++++ arch/powerpc/include/uapi/asm/kvm_perf.h | 19 ++++ arch/powerpc/include/uapi/asm/trace_book3s.h | 33 +++++++ arch/powerpc/include/uapi/asm/trace_hcall.h | 122 ++++++++++++++++++++++++++ arch/powerpc/kvm/trace_book3s.h | 32 ------- arch/powerpc/kvm/trace_hv.h | 119 ------------------------- arch/powerpc/kvm/trace_pr.h | 2 tools/perf/arch/powerpc/Makefile | 1 tools/perf/arch/powerpc/util/Build | 1 tools/perf/arch/powerpc/util/kvm-stat.c | 94 ++++++++++++++++++++ 11 files changed, 398 insertions(+), 268 deletions(-)create mode 100644
arch/powerpc/include/uapi/asm/hcall_codes.hcreate mode 100644arch/powerpc/include/uapi/asm/kvm_perf.hcreate mode 100644arch/powerpc/include/uapi/asm/trace_book3s.hcreate mode 100644arch/powerpc/include/uapi/asm/trace_hcall.hdelete mode 100644arch/powerpc/kvm/trace_book3s.hcreate mode 100644tools/perf/arch/powerpc/util/kvm-stat.c--
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
Signature · 2 lines
Thanks, Hemant Kumar
Michael Ellerman
reviewerQuoted 6 lines · Hemant Kumar
Hi Michael,
These patches were posted a month back. We don't have any review comments to handle at this time. Can you pull these patches to your tree? Please, do let me know if you want me to rebase these patches to a different tree (like Arnaldo's/tip etc).
I can't pull them unless they are ACKed by someone from perf. It doesn't look like you CC'ed any of the perf maintainers.
To make it easier you should split them into patches that touch powerpc and patches that touch perf.
eg:
Quoted 9 lines · Hemant Kumar
Quoted 8 lines
arch/powerpc/include/asm/hvcall.h | 120 ------------------------- arch/powerpc/include/uapi/asm/hcall_codes.h | 123 ++++++++++++++++++++++++++ arch/powerpc/include/uapi/asm/kvm_perf.h | 19 ++++ arch/powerpc/include/uapi/asm/trace_book3s.h | 33 +++++++ arch/powerpc/include/uapi/asm/trace_hcall.h | 122 ++++++++++++++++++++++++++ arch/powerpc/kvm/trace_book3s.h | 32 ------- arch/powerpc/kvm/trace_hv.h | 119 ------------------------- arch/powerpc/kvm/trace_pr.h | 2
Patch 1 ^
Quoted 3 lines
Quoted 3 lines
tools/perf/arch/powerpc/Makefile | 1 tools/perf/arch/powerpc/util/Build | 1 tools/perf/arch/powerpc/util/kvm-stat.c | 94 ++++++++++++++++++++
Patch 2 ^
Then I can merge patch 1, and the perf maintainers can merge patch 2.
Similar comments for patch 2 of your original series.
cheers