Skip to contentSkip to conversation

ARM: mx25: Remove mach-mx25_3ds board file

PATCH New Fabio Estevam 3 participants 5 messages Feb 28, 2015 – Mar 3, 2015

Subsystems (3)
Arm (32-bit) Arm sub-architectures Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: mx25: Remove mach-mx25_3ds board file

From: Fabio Estevam <[email protected]>

imx25-pdk.dts provides a more complete support than the board file version, so let's get rid of the board file.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/mach-imx/Kconfig         |  15 ---
 arch/arm/mach-imx/Makefile        |   1 -
 arch/arm/mach-imx/mach-mx25_3ds.c | 270 --------------------------------------
 3 files changed, 286 deletions(-)
 delete mode 100644 arch/arm/mach-imx/mach-mx25_3ds.c
arch/arm/mach-imx/Kconfig +0 -15
index e8627e0..aaea738 100644
@@ -151,21 +151,6 @@ config MACH_MX21ADS
 
 comment "MX25 platforms:"
 
-config MACH_MX25_3DS
-	bool "Support MX25PDK (3DS) Platform"
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select SOC_IMX25
-
 config MACH_EUKREA_CPUIMX25SD
 	bool "Support Eukrea CPUIMX25 Platform"
 	select IMX_HAVE_PLATFORM_FLEXCAN
arch/arm/mach-imx/Makefile +0 -1
index 8d1b101..e92ede9 100644
@@ -49,7 +49,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
 # i.MX25 based machines
-obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
 obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
arch/arm/mach-imx/mach-mx25_3ds.c deleted +0 -0
deleted file mode 100644
index 0d01e36..0000000
Signature · 1 line
1.9.1
author reviewer
#1 lore raw

PATCH 1/1 ARM: mx25: Remove mach-mx25_3ds board file

Hi Eric,

Quoted 6 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

imx25-pdk.dts provides a more complete support than the board file version, so let's get rid of the board file.

Signed-off-by Fabio Estevam <[email protected]>

Do you mind if I submit a patch removing the eukrea mx25 board files?

If this is possible, then we can convert mx25 to a dt-only platform.

Regards,

Fabio Estevam

#2 lore raw

PATCH 1/1 ARM: mx25: Remove mach-mx25_3ds board file

Hi Fabio,

Le Sat, 28 Feb 2015 12:42:45 -0300,
Fabio Estevam <[email protected]> a ?crit :

Quoted 12 lines · Fabio Estevam
Quoted 6 lines

From: Fabio Estevam <[email protected]>

imx25-pdk.dts provides a more complete support than the board file version, so let's get rid of the board file.

Signed-off-by Fabio Estevam <[email protected]>

Do you mind if I submit a patch removing the eukrea mx25 board files?

If this is possible, then we can convert mx25 to a dt-only platform.

no problem on our side, it was supposed to be removed after DT support for this board was accepted but it seems the patch was never sent ;-)

Best regards,
Eric

#3 lore raw

PATCH 1/1 ARM: mx25: Remove mach-mx25_3ds board file

In reply to Fabio Estevam
Quoted 6 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

imx25-pdk.dts provides a more complete support than the board file version, so let's get rid of the board file.

Signed-off-by Fabio Estevam <[email protected]>

It applies neither my branch nor v4.0-rc1. Can you please generate the patch against imx/soc branch?

Shawn

Quoted 51 lines
---
 arch/arm/mach-imx/Kconfig         |  15 ---
 arch/arm/mach-imx/Makefile        |   1 -
 arch/arm/mach-imx/mach-mx25_3ds.c | 270 --------------------------------------
 3 files changed, 286 deletions(-)
 delete mode 100644 arch/arm/mach-imx/mach-mx25_3ds.c
arch/arm/mach-imx/Kconfig +0 -15
index e8627e0..aaea738 100644
@@ -151,21 +151,6 @@ config MACH_MX21ADS
 
 comment "MX25 platforms:"
 
-config MACH_MX25_3DS
-	bool "Support MX25PDK (3DS) Platform"
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select SOC_IMX25
-
 config MACH_EUKREA_CPUIMX25SD
 	bool "Support Eukrea CPUIMX25 Platform"
 	select IMX_HAVE_PLATFORM_FLEXCAN
arch/arm/mach-imx/Makefile +0 -1
index 8d1b101..e92ede9 100644
@@ -49,7 +49,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
 # i.MX25 based machines
-obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
 obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
arch/arm/mach-imx/mach-mx25_3ds.c deleted +0 -0
deleted file mode 100644
index 0d01e36..0000000
Signature · 1 line
1.9.1
#4 lore raw

PATCH 1/1 ARM: mx25: Remove mach-mx25_3ds board file

Quoted 10 lines · Shawn Guo
Quoted 6 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

imx25-pdk.dts provides a more complete support than the board file version, so let's get rid of the board file.

Signed-off-by Fabio Estevam <[email protected]>

It applies neither my branch nor v4.0-rc1. Can you please generate the patch against imx/soc branch?

Sorry, I meant imx/cleanup branch.

Shawn