travis.yml: some adaptions

PATCH New Heiko Schocher 3 participants 5 messages Mar 5, 2015 – Mar 6, 2015

Share & tools

Heiko Schocher

author

2015-03-05 08:02 UTC #0 lore raw

PATCH 1/1 travis.yml: some adaptions

- adapt to build with eldk-5.4
- add more targets for building with buildman:
- freescale -x arm,m68k,aarch64
- arm1136
- arm1176
- arm720t
- arm920t
- davinci
- kirkwood

Signed-off-by Heiko Schocher <[email protected]>

---
ti and kirkwood boards show errors, this should be fixed from the board maintainers, see build here:
https://travis-ci.org/hsdenx/u-boot/builds/53150150

ti boards:
see: https://travis-ci.org/hsdenx/u-boot/jobs/53150166#L466

Building current source for 30 boards (30 threads, 2 jobs per thread)
arm: + am335x_evm_usbspl
+(am335x_evm_usbspl) armv5te-ld.bfd: u-boot-spl section .rodata' will not fit in region .sram' +(am335x_evm_usbspl) armv5te-ld.bfd: region `.sram' overflowed by 6972 bytes +(am335x_evm_usbspl) make[2]: *** [spl/u-boot-spl] Error 1
+(am335x_evm_usbspl) make[1]: *** [spl/u-boot-spl] Error 2
+(am335x_evm_usbspl) make: *** [sub-make] Error 2
29 0 1 /30 am335x_evm_nor

The command "${TEST_CMD}" exited with 128.

kirkwood boards:
see: https://travis-ci.org/hsdenx/u-boot/jobs/53150172#L466

Building current source for 35 boards (32 threads, 1 job per thread)
arm: + openrd_base
+(openrd_base) u-boot.bin exceeds file size limit:
+(openrd_base) limit: 393216 bytes
+(openrd_base) actual: 411124 bytes
+(openrd_base) excess: 17908 bytes
+(openrd_base) make[1]: *** [u-boot.bin] Error 1 +(openrd_base) make: *** [sub-make] Error 2
arm: + openrd_client
+(openrd_client) u-boot.bin exceeds file size limit:
+(openrd_client) limit: 393216 bytes
+(openrd_client) actual: 411200 bytes
+(openrd_client) excess: 17984 bytes
+(openrd_client) make[1]: *** [u-boot.bin] Error 1 +(openrd_client) make: *** [sub-make] Error 2
arm: + openrd_ultimate
+(openrd_ultimate) u-boot.bin exceeds file size limit:
+(openrd_ultimate) limit: 393216 bytes
+(openrd_ultimate) actual: 411176 bytes +(openrd_ultimate) excess: 17960 bytes
+(openrd_ultimate) make[1]: *** [u-boot.bin] Error 1 +(openrd_ultimate) make: *** [sub-make] Error 2
32 0 3 /35 sheevaplug
The command "${TEST_CMD}" exited with 128.

 .travis.yml | 115 ++++++++++++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 89 insertions(+), 26 deletions(-)

.travis.yml +89 ~~-26~~

index 923c9dd..1d5c18a 100644
@@ -10,7 +10,7 @@ cache:
 
 install:
  # install U-Boot build dependencies
- - sudo apt-get install -qq cppcheck sloccount sparse bc libsdl-dev gcc-arm-linux-gnueabi gcc-arm-linux-gnueabihf
+ - sudo apt-get install -qq cppcheck sloccount sparse bc libsdl-dev build-essential
  # install latest device tree compiler
  - git clone --depth=1 https://git.kernel.org/pub/scm/utils/dtc/dtc.git /tmp/dtc
  - make -j4 -C /tmp/dtc

@@ -18,11 +18,17 @@ install:
  - export BUILDMAN_ROOT="root:"
  - export BUILDMAN_MIPS="mips:"
  - export BUILDMAN_PPC="ppc:"
- - echo -e "[toolchain]\\n${BUILDMAN_ROOT} /\n" > ~/.buildman
- - echo -e "${BUILDMAN_MIPS} /opt/eldk-5.4/mips/sysroots/i686-eldk-linux/usr/bin/mips32-linux/" >> ~/.buildman
- - echo -e "${BUILDMAN_PPC} /opt/eldk-5.4/powerpc/sysroots/i686-eldk-linux/usr/bin/powerpc-linux/" >> ~/.buildman
+ - export BUILDMAN_ARM="arm:"
+ - export BUILDMAN_SANDBOX="sandbox:"
+ - echo -e "[toolchain]\n${BUILDMAN_ROOT} /\n" > ~/.buildman
+ - echo -e "${BUILDMAN_MIPS} /opt/eldk-5.4/mips/sysroots/i686-eldk-linux/usr/bin/mips32-linux/\n" >> ~/.buildman
+ - echo -e "${BUILDMAN_PPC} /opt/eldk-5.4/powerpc/sysroots/i686-eldk-linux/usr/bin/powerpc-linux/\n" >> ~/.buildman
+ - echo -e "${BUILDMAN_ARM} /opt/eldk-5.4/armv5te/sysroots/i686-eldk-linux/usr/bin/armv5te-linux-gnueabi/\n" >> ~/.buildman
+ - echo -e "${BUILDMAN_SANDBOX} /usr/bin/gcc\n" >> ~/.buildman
  - export BUILDMAN_ALIAS="x86:"
- - echo -e "[toolchain-alias]\\n${BUILDMAN_ALIAS}  i386" >> ~/.buildman
+ - export BUILDMAN_ALIAS_ARM="arm:"
+ - echo -e "\n\n[toolchain-alias]\n${BUILDMAN_ALIAS} i386\n" >> ~/.buildman
+ - echo -e "${BUILDMAN_ALIAS_ARM} armv5te\n" >> ~/.buildman
  - cat ~/.buildman
 
 env:

@@ -40,6 +46,10 @@ before_script:
   - if [[ "${INSTALL_TOOLCHAIN}" == *ppc* ]]; then sh eldk-eglibc-i686-powerpc-toolchain-gmae-5.4.sh -y ; fi
   - if [[ "${INSTALL_TOOLCHAIN}" == *mips* ]]; then wget ftp://ftp.denx.de/pub/eldk/5.4/targets/mips/eldk-eglibc-i686-mips-toolchain-gmae-5.4.sh ; fi
   - if [[ "${INSTALL_TOOLCHAIN}" == *mips* ]]; then sh eldk-eglibc-i686-mips-toolchain-gmae-5.4.sh -y ; fi
+  - if [[ "${INSTALL_TOOLCHAIN}" == *arm* ]]; then wget ftp://ftp.denx.de/pub/eldk/5.4/targets/armv5te/eldk-eglibc-i686-arm-toolchain-gmae-5.4.sh ; fi
+  - if [[ "${INSTALL_TOOLCHAIN}" == *arm* ]]; then sh eldk-eglibc-i686-arm-toolchain-gmae-5.4.sh -y ; fi
+  - if [[ "${INSTALL_TOOLCHAIN}" == *arm* ]]; then ls -al /opt/eldk-5.4/armv5te/sysroots/i686-eldk-linux/usr/bin/armv5te-linux-gnueabi ; fi
+  - if [[ "${INSTALL_TOOLCHAIN}" == *i386* ]]; then ./tools/buildman/buildman sandbox --fetch-arch i386 ; fi
 
 script:
  # the execution sequence for each test

@@ -54,19 +64,24 @@ matrix:
   # each env setting here is a dedicated build
     - env:
         - TEST_CMD="./MAKEALL -a arm -v atmel"
-          CROSS_COMPILE="arm-linux-gnueabi-"
+          INSTALL_TOOLCHAIN="arm"
+          CROSS_COMPILE="/opt/eldk-5.4/armv5te/sysroots/i686-eldk-linux/usr/bin/armv5te-linux-gnueabi/arm-linux-gnueabi-"
     - env:
         - TEST_CMD="./MAKEALL -a arm -v denx"
-          CROSS_COMPILE="arm-linux-gnueabi-"
+          INSTALL_TOOLCHAIN="arm"
+          CROSS_COMPILE="/opt/eldk-5.4/armv5te/sysroots/i686-eldk-linux/usr/bin/armv5te-linux-gnueabi/arm-linux-gnueabi-"
     - env:
         - TEST_CMD="./MAKEALL -a arm -v freescale"
-          CROSS_COMPILE="arm-linux-gnueabi-"
+          INSTALL_TOOLCHAIN="arm"
+          CROSS_COMPILE="/opt/eldk-5.4/armv5te/sysroots/i686-eldk-linux/usr/bin/armv5te-linux-gnueabi/arm-linux-gnueabi-"
     - env:
         - TEST_CMD="./MAKEALL -a arm -v siemens"
-          CROSS_COMPILE="arm-linux-gnueabi-"
+          INSTALL_TOOLCHAIN="arm"
+          CROSS_COMPILE="/opt/eldk-5.4/armv5te/sysroots/i686-eldk-linux/usr/bin/armv5te-linux-gnueabi/arm-linux-gnueabi-"
     - env:
         - TEST_CMD="./MAKEALL -a arm -v ti"
-          CROSS_COMPILE="arm-linux-gnueabi-"
+          INSTALL_TOOLCHAIN="arm"
+          CROSS_COMPILE="/opt/eldk-5.4/armv5te/sysroots/i686-eldk-linux/usr/bin/armv5te-linux-gnueabi/arm-linux-gnueabi-"
     - env:
         - TEST_CONFIG_CMD="make sandbox_defconfig"
           TEST_CMD="make -j4"

@@ -82,45 +97,93 @@ matrix:
           INSTALL_TOOLCHAIN="mips"
           CROSS_COMPILE="/opt/eldk-5.4/mips/sysroots/i686-eldk-linux/usr/bin/mips32-linux/mips-linux-"
     - env:
-        - TEST_CMD="tools/buildman/buildman --list-error-boards atmel"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards atmel -x avr32"
+          INSTALL_TOOLCHAIN="arm"
     - env:
-        - TEST_CMD="tools/buildman/buildman --list-error-boards denx"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards denx"
+          INSTALL_TOOLCHAIN="arm"
     - env:
-        - TEST_CMD="tools/buildman/buildman --list-error-boards freescale arm"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards freescale -x powerpc,m68k,aarch64"
+          INSTALL_TOOLCHAIN="arm"
     - env:
-        - TEST_CMD="tools/buildman/buildman --list-error-boards siemens"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards freescale -x arm,m68k,aarch64"
+          INSTALL_TOOLCHAIN="ppc"
+    - env:
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards siemens"
+          INSTALL_TOOLCHAIN="arm"
+    - env:
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards ti"
+          INSTALL_TOOLCHAIN="arm"
+    - env:
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards arm1136"
+          INSTALL_TOOLCHAIN="arm"
+    - env:
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards arm1176"
+          INSTALL_TOOLCHAIN="arm"
     - env:
-        - TEST_CMD="tools/buildman/buildman --list-error-boards ti"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards arm720t"
+          INSTALL_TOOLCHAIN="arm"
     - env:
-        - TEST_CMD="tools/buildman/buildman mips"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards arm920t"
+          INSTALL_TOOLCHAIN="arm"
+    - env:
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards davinci"
+          INSTALL_TOOLCHAIN="arm"
+    - env:
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards kirkwood"
+          INSTALL_TOOLCHAIN="arm"
+    - env:
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman mips"
           INSTALL_TOOLCHAIN="mips"
     - env:
-        - TEST_CMD="tools/buildman/buildman mpc5xx"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman mpc5xx"
           INSTALL_TOOLCHAIN="ppc"
     - env:
-        - TEST_CMD="tools/buildman/buildman mpc8xx"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman mpc8xx"
           INSTALL_TOOLCHAIN="ppc"
     - env:
-        - TEST_CMD="tools/buildman/buildman mpc5xxx"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman mpc5xxx"
           INSTALL_TOOLCHAIN="ppc"
     - env:
-        - TEST_CMD="tools/buildman/buildman mpc512x"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman mpc512x"
           INSTALL_TOOLCHAIN="ppc"
     - env:
-        - TEST_CMD="tools/buildman/buildman mpc8260"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman mpc8260"
           INSTALL_TOOLCHAIN="ppc"
     - env:
-        - TEST_CMD="tools/buildman/buildman mpc83xx"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman mpc83xx"
           INSTALL_TOOLCHAIN="ppc"
     - env:
-        - TEST_CMD="tools/buildman/buildman mpc85xx"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman mpc85xx"
           INSTALL_TOOLCHAIN="ppc"
     - env:
-        - TEST_CMD="tools/buildman/buildman mpc86xx"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman mpc86xx"
           INSTALL_TOOLCHAIN="ppc"
-
     - env:
-        - TEST_CMD="tools/buildman/buildman --list-error-boards sandbox x86"
+        - TEST_CONFIG_CMD="tools/buildman/buildman --list-tool-chains"
+          TEST_CMD="tools/buildman/buildman --list-error-boards sandbox x86"
+          INSTALL_TOOLCHAIN="i386"
 
     # QA jobs for code analytics
     # static code analysis with cppcheck (we can add --enable=all later)

Signature · 1 line

2.1.0

Meier

2015-03-05 11:02 UTC #1 lore raw

PATCH 1/1 travis.yml: some adaptions

Thanks Heiko!

This is a great step towards *build everything* on public servers.

Quoted 17 lines

-----Original Message-----
From: Heiko Schocher [mailto:hs at denx.de]
Sent: Donnerstag, 5. M?rz 2015 09:02
To: u-boot at lists.denx.de
Cc: Heiko Schocher; Prafulla Wadaskar; Tom Rini; Meier, Roger; Luka Perkov
Subject: [PATCH] travis.yml: some adaptions
- adapt to build with eldk-5.4
- add more targets for building with buildman:
- freescale -x arm,m68k,aarch64
- arm1136
- arm1176
- arm720t
- arm920t
- davinci
- kirkwood

Quoted 1 line

Signed-off-by Heiko Schocher <[email protected]>

Reviewed-by Roger Meier <[email protected]>

regards
-roger

Tom Rini

2015-03-05 14:43 UTC #2 lore raw

PATCH 1/1 travis.yml: some adaptions

Quoted 3 lines · Roger

Thanks Heiko!
This is a great step towards *build everything* on public servers.

On that note, I'm using eldk-5.5.3 for ARM, the kernel.org toolchains for avr32, m68k and sh4, eldk-5.6 for powerpc/mips and a Linaro toolchain for aarch64 for my testing.

Signature · 8 lines

Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150305/b58c8ac6/attachment.sig>

Heiko Schocher

author

2015-03-06 08:06 UTC #3 lore raw

PATCH 1/1 travis.yml: some adaptions

Hello Tom,

Am 05.03.2015 15:43, schrieb Tom Rini:

Quoted 9 lines · Roger

Quoted 4 lines
Thanks Heiko!
This is a great step towards *build everything* on public servers.
On that note, I'm using eldk-5.5.3 for ARM, the kernel.org toolchains for avr32, m68k and sh4, eldk-5.6 for powerpc/mips and a Linaro toolchain for aarch64 for my testing.

I just prepare a patch for adding arc, avr32, m68k and sh4 to the build on travis.

bye,
Heiko

Signature · 2 lines

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Tom Rini

2015-03-05 14:43 UTC #4 lore raw

PATCH 1/1 travis.yml: some adaptions

In reply to Heiko Schocher

Quoted 10 lines · Heiko Schocher

- adapt to build with eldk-5.4
- add more targets for building with buildman:
- freescale -x arm,m68k,aarch64
- arm1136
- arm1176
- arm720t
- arm920t
- davinci
- kirkwood

Quoted 2 lines

Signed-off-by Heiko Schocher <[email protected]>
Reviewed-by Roger Meier <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines

Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150305/21574109/attachment.sig>