Skip to contentSkip to conversation

clockevents: fixes for 4.0-rc2

GIT PULL New Daniel Lezcano 2 participants 4 messages Mar 5, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi Ingo, Thomas,

This couple of patches fixes a potential crash at boot time.

- Fix setup_irq / clockevents_config_and_register init ordering in
order to prevent to have an interrupt to be fired before the handler is set for sun5i and efm32 (Yongbae Park)

Thanks !

-- Daniel

The following changes since commit 13a7a6ac0a11197edcd0f756a035f472b42cdf8b:

Linux 4.0-rc2 (2015-03-03 09:04:59 -0800)

are available in the git repository at:

http://git.linaro.org/people/daniel.lezcano/linux.git clockevents/4.0-rc2

for you to fetch changes up to 1096be084ac59927158ce80ff1d31c33eed0e565:

clockevents: sun5i: Fix setup_irq init sequence (2015-03-05 15:01:37
+0100)

----------------------------------------------------------------
Yongbae Park (2):
clocksource: efm32: Fix a NULL pointer dereference
clockevents: sun5i: Fix setup_irq init sequence

 drivers/clocksource/time-efm32.c  | 4 ++--
 drivers/clocksource/timer-sun5i.c | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)
Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#1 lore raw

PATCH 1/2 clocksource: efm32: Fix a NULL pointer dereference

From: Yongbae Park <[email protected]>

The initialisation of the efm32 clocksource first sets up the irq and only after that initialises the data needed for irq handling. In case this initialisation is delayed the irq handler would dereference a NULL pointer.

I'm not aware of anything that could delay the process in such a way, but it's better to be safe than sorry, so setup the irq only when the clock event device is ready.

---
 drivers/clocksource/time-efm32.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clocksource/time-efm32.c +2 -2
index bba62f9..ec57ba2 100644
@@ -225,12 +225,12 @@ static int __init efm32_clockevent_init(struct device_node *np)
 	clock_event_ddata.base = base;
 	clock_event_ddata.periodic_top = DIV_ROUND_CLOSEST(rate, 1024 * HZ);
 
-	setup_irq(irq, &efm32_clock_event_irq);
-
 	clockevents_config_and_register(&clock_event_ddata.evtdev,
 					DIV_ROUND_CLOSEST(rate, 1024),
 					0xf, 0xffff);
 
+	setup_irq(irq, &efm32_clock_event_irq);
+
 	return 0;
 
 err_get_irq:
Signature · 1 line
1.9.1
#2 lore raw

PATCH 2/2 clockevents: sun5i: Fix setup_irq init sequence

From: Yongbae Park <[email protected]>

The interrupt is enabled before the handler is set. Even this bug did not appear, it is potentially dangerous as it can lead to a NULL pointer dereference.

Fix the error by enabling the interrupt after
clockevents_config_and_register() is called.

---
 drivers/clocksource/timer-sun5i.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/clocksource/timer-sun5i.c +4 -4
index 0226844..5dcbf90 100644
@@ -178,10 +178,6 @@ static void __init sun5i_timer_init(struct device_node *node)
 
 	ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
 
-	ret = setup_irq(irq, &sun5i_timer_irq);
-	if (ret)
-		pr_warn("failed to setup irq %d\n", irq);
-
 	/* Enable timer0 interrupt */
 	val = readl(timer_base + TIMER_IRQ_EN_REG);
 	writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
@@ -191,6 +187,10 @@ static void __init sun5i_timer_init(struct device_node *node)
 
 	clockevents_config_and_register(&sun5i_clockevent, rate,
 					TIMER_SYNC_TICKS, 0xffffffff);
+
+	ret = setup_irq(irq, &sun5i_timer_irq);
+	if (ret)
+		pr_warn("failed to setup irq %d\n", irq);
 }
 CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer",
 		       sun5i_timer_init);
Signature · 1 line
1.9.1
#3 lore raw
In reply to Daniel Lezcano
Quoted 25 lines · Daniel Lezcano

Hi Ingo, Thomas,

This couple of patches fixes a potential crash at boot time.

- Fix setup_irq / clockevents_config_and_register init ordering in order to
prevent to have an interrupt to be fired before the handler is set for sun5i and efm32 (Yongbae Park)

Thanks !

-- Daniel

The following changes since commit 13a7a6ac0a11197edcd0f756a035f472b42cdf8b:

Linux 4.0-rc2 (2015-03-03 09:04:59 -0800)

are available in the git repository at:

http://git.linaro.org/people/daniel.lezcano/linux.git clockevents/4.0-rc2

for you to fetch changes up to 1096be084ac59927158ce80ff1d31c33eed0e565:

clockevents: sun5i: Fix setup_irq init sequence (2015-03-05 15:01:37
+0100)

Quoted 8 lines

----------------------------------------------------------------
Yongbae Park (2):
clocksource: efm32: Fix a NULL pointer dereference
clockevents: sun5i: Fix setup_irq init sequence

 drivers/clocksource/time-efm32.c  | 4 ++--
 drivers/clocksource/timer-sun5i.c | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

Pulled into tip:timers/urgent, thanks Daniel!

Ingo