omap3: add support for QUIPOS Cairo board.
PATCH v2 1/1 omap3: add support for QUIPOS Cairo board.
This patch extends OMAP3 support for AM/DM37xx and introduces the AM3703-based Quipos Cairo board.
---
NOTES:
Two checkpatch diagnostics are left uncorrected:
1. "warning: arch/arm/cpu/armv7/omap3/Kconfig,94: please write a paragraph that describes the config symbol fully" No other symbol of the same nature has such a paragraph, so I left it out.
2. "check: board/quipos/cairo/cairo.c,87: Avoid CamelCase:
<SDP_3430_SDRC_RFR_CTRL_165MHz>"
Symbol was not defined in this patch. If requested, I will post a separate change to fix the symbol.
Changes in v2:
- removed v1 patches 1..5 applied to mainline
- corrected serial device name from ttyS1 to ttyO1
- rewrote config file based on omap3_beagle's
- moved serial support to DM
- fixed environment
arch/arm/cpu/armv7/omap3/Kconfig | 5 + board/quipos/cairo/Kconfig | 12 ++ board/quipos/cairo/Makefile | 8 + board/quipos/cairo/cairo.c | 110 ++++++++++++++ board/quipos/cairo/cairo.h | 319 +++++++++++++++++++++++++++++++++++++++ configs/cairo_defconfig | 4 + include/configs/omap3_cairo.h | 286 +++++++++++++++++++++++++++++++++++ 7 files changed, 744 insertions(+) create mode 100644 board/quipos/cairo/Kconfig create mode 100644 board/quipos/cairo/Makefile create mode 100644 board/quipos/cairo/cairo.c create mode 100644 board/quipos/cairo/cairo.h create mode 100644 configs/cairo_defconfig create mode 100644 include/configs/omap3_cairo.h
arch/arm/cpu/armv7/omap3/Kconfig +5 -0
@@ -91,6 +91,10 @@ config TARGET_TWISTER bool "Twister" select SUPPORT_SPL +config TARGET_OMAP3_CAIRO + bool "QUIPOS CAIRO" + select SUPPORT_SPL + endchoice config SYS_SOC
@@ -118,5 +122,6 @@ source "board/matrix_vision/mvblx/Kconfig" source "board/nokia/rx51/Kconfig" source "board/technexion/tao3530/Kconfig" source "board/technexion/twister/Kconfig" +source "board/quipos/cairo/Kconfig" endif
board/quipos/cairo/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_OMAP3_CAIRO + +config SYS_BOARD + default "cairo" + +config SYS_VENDOR + default "quipos" + +config SYS_CONFIG_NAME + default "omap3_cairo" + +endif
board/quipos/cairo/Makefile new file +8 -0
@@ -0,0 +1,8 @@ +# +# (C) Copyright 2014 DENX Software Engineering +# Written-By: Albert ARIBAUD <[email protected]> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := cairo.o
board/quipos/cairo/cairo.c new file +110 -0
110 lines not on this page · raw message
board/quipos/cairo/cairo.h new file +319 -0
319 lines not on this page · raw message
configs/cairo_defconfig new file +4 -0
@@ -0,0 +1,4 @@ +CONFIG_SPL=y ++S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y ++S:CONFIG_TARGET_OMAP3_CAIRO=y
include/configs/omap3_cairo.h new file +286 -0
286 lines not on this page · raw message
Signature · 1 line
2.1.0
PATCH v2 1/1 omap3: add support for QUIPOS Cairo board.
Hi Albert,
Quoted 19 lines · On 3 February 2015 at 10:13, Albert ARIBAUD (3ADEV) <[email protected]>…
This patch extends OMAP3 support for AM/DM37xx and introduces the AM3703-based Quipos Cairo board.
Signed-off-by Albert ARIBAUD (3ADEV) <[email protected]>---
NOTES:Two checkpatch diagnostics are left uncorrected:
1. "warning:
arch/arm/cpu/armv7/omap3/Kconfig,94: please write a paragraph that describes the config symbol fully" No other symbol of the same nature has such a paragraph, so I left it out.2. "check: board/quipos/cairo/cairo.c,87: Avoid CamelCase:
<SDP_3430_SDRC_RFR_CTRL_165MHz>"Symbol was not defined in this patch. If requested, I will post a separate change to fix the symbol.
Quoted 6 lines
Changes in v2:
- removed v1 patches 1..5 applied to mainline
- corrected serial device name from ttyS1 to ttyO1
- rewrote config file based on omap3_beagle's
- moved serial support to DM
- fixed environment
I would argue for device tree support instead of platform data, but I'm not sure if this platform has that so will reserve judgement.
Regards,
Simon
PATCH v2 1/1 omap3: add support for QUIPOS Cairo board.
In reply to Albert ARIBAUD (3ADEV)Quoted 5 lines · On Tue, Feb 03, 2015 at 06:13:14PM +0100, Albert ARIBAUD (3ADEV) wrote:
This patch extends OMAP3 support for AM/DM37xx and introduces the AM3703-based Quipos Cairo board.
Signed-off-by Albert ARIBAUD (3ADEV) <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150306/0c381a1b/attachment.sig>