Skip to contentSkip to conversation

Question about board-specific Makefile actions

U-Boot James Chargin 4 participants 10 messages Mar 3, 2015 – Mar 17, 2015

lore
Share & tools
lore
#0 lore raw

I have a custom board in a git workspace for U-Boot 2014.07. I've copied most of this from the .../board/ti/beagle. My board directory Makefile looks like

8<---
obj-y := board.o
8<---

I'd like to add a few files to this directory that are processed during "make all" and have any newly derived files deleted during "make clean".

I've experimented with various Makefile contents but I can't get the new files processed or any newly derived files deleted. U-Boot's makefile system is quite large for my experience level and it seems I don't have enough understanding.

A new file might contain some hush commands that are to be executed from the U-Boot command line. I'd like to use "source" to process these commands. The "source" command requires that its argument be an image (I get this into memory via TFTP), so I'd like "make all" to transform the text file containing the hush commands into the image file. I'd also like "make clean" to delete the derived image file.

So, if my hush commands are in a text file called test.txt, I'd like "make all" to apply mkimage so that a test.img is generated. I'd also like "make clean" to delete test.img.

I tried various changes to my Makefile, but the most likely seeming changes are

8<---
IMG = test.img

obj-y := board.o

board.o : $(IMG)

%.img : %.txt

	$(srctree)/tools/mkimage -T script -n $* -C none -d $< $@

CLEAN_FILES += $(IMG)
CLEAN_DIRS += .
8<---

This doesn't work, nor has any other approach I've taken. mkimage is never run for "make all" and test.img doesn't get deleted if I create a fake one and run "make clean"

Could someone offer a solution, either directly, or by pointing at an existing board that does something similar?

Thanks
Jim

Signature · 3 lines
Jim Chargin
AJA Video Systems                       [email protected]
(530) 271-3334                          http://www.aja.com
#1 lore raw

So, is no one willing to offer a hint?

Thanks,
Jim

Quoted 54 lines · James Chargin

I have a custom board in a git workspace for U-Boot 2014.07. I've copied most of this from the .../board/ti/beagle. My board directory Makefile looks like

8<---
obj-y := board.o
8<---

I'd like to add a few files to this directory that are processed during "make all" and have any newly derived files deleted during "make clean".

I've experimented with various Makefile contents but I can't get the new files processed or any newly derived files deleted. U-Boot's makefile system is quite large for my experience level and it seems I don't have enough understanding.

A new file might contain some hush commands that are to be executed from the U-Boot command line. I'd like to use "source" to process these commands. The "source" command requires that its argument be an image (I get this into memory via TFTP), so I'd like "make all" to transform the text file containing the hush commands into the image file. I'd also like "make clean" to delete the derived image file.

So, if my hush commands are in a text file called test.txt, I'd like "make all" to apply mkimage so that a test.img is generated. I'd also like "make clean" to delete test.img.

I tried various changes to my Makefile, but the most likely seeming changes are

8<---
IMG = test.img

obj-y := board.o

board.o : $(IMG)

%.img : %.txt

     $(srctree)/tools/mkimage -T script -n $* -C none -d $< $@

CLEAN_FILES += $(IMG)
CLEAN_DIRS += .
8<---

This doesn't work, nor has any other approach I've taken. mkimage is never run for "make all" and test.img doesn't get deleted if I create a fake one and run "make clean"

Could someone offer a solution, either directly, or by pointing at an existing board that does something similar?

Thanks
Jim

Signature · 3 lines
Jim Chargin
AJA Video Systems                       jimc at aja.com
(530) 271-3334                          http://www.aja.com
#2 lore raw

I could still use some help with this from someone who really knows how the make system works.

Tom and Simon provided hints that were helpful, as I note below.

Quoted 56 lines · James Chargin

So, is no one willing to offer a hint?

Thanks,
Jim

Quoted 50 lines · James Chargin

I have a custom board in a git workspace for U-Boot 2014.07. I've copied most of this from the .../board/ti/beagle. My board directory Makefile looks like

8<---
obj-y := board.o
8<---

I'd like to add a few files to this directory that are processed during "make all" and have any newly derived files deleted during "make clean".

I've experimented with various Makefile contents but I can't get the new files processed or any newly derived files deleted. U-Boot's makefile system is quite large for my experience level and it seems I don't have enough understanding.

A new file might contain some hush commands that are to be executed from the U-Boot command line. I'd like to use "source" to process these commands. The "source" command requires that its argument be an image (I get this into memory via TFTP), so I'd like "make all" to transform the text file containing the hush commands into the image file. I'd also like "make clean" to delete the derived image file.

So, if my hush commands are in a text file called test.txt, I'd like "make all" to apply mkimage so that a test.img is generated. I'd also like "make clean" to delete test.img.

I tried various changes to my Makefile, but the most likely seeming changes are

8<---
IMG = test.img

obj-y := board.o

board.o : $(IMG)

%.img : %.txt

     $(srctree)/tools/mkimage -T script -n $* -C none -d $< $@

CLEAN_FILES += $(IMG)
CLEAN_DIRS += .
8<---

This doesn't work, nor has any other approach I've taken. mkimage is never run for "make all" and test.img doesn't get deleted if I create a fake one and run "make clean"

Could someone offer a solution, either directly, or by pointing at an existing board that does something similar?

Quoted 3 lines · Tom Rini

Off the top of my head, try throwing test.img into obj-y ?

Adding text.img to obj-y did cause the .img file to get generated, but it also added text.img to the list of files supplied to ld, causing the final u-boot link to fail

Quoted 2 lines · Simon Glass

Also you may want to add a command like cmd_img_txt (see Makefile.lib for examples). Did you need to add anything to ALL-y?

Your mention of Makefile.lib prompted my to look there for other targets I might use. I discovered extra-y and adding

extra-y := test.img

to my board's Makefile caused the correct operations.

As you suggest, I added cmd_my_mkimage, which while not actually needed, is a very nice way to have a non-verbose progress report in the make output.

Quoted 2 lines

Another option is to put this outside the U-Boot build system, and just run mkimage later.

I really want these steps to be part of the normal board make. Requiring a separate manual build step will inevitably result in that separate step being forgotten (most probably by me).

Is there any documentation you could point me at that might explain the way these Makefiles interact? I know most of this was derived from somewhere else (Linux kernel?) as part of the move to KConfig. But I have no experience with the kernel build system and following make's debug output is difficult, at best. Some overview of how makes are done would be quite helpful to me and maybe to other non-U-Boot-developers.

Remaining problems:

1) I can't figure out how to clean my newly created derived .img file. I've tried each of the following four lines (one at a time), but none worked CLEAN_FILES += board/aja/helo/helo_setupdeveloper.img CLEAN_FILES += test.img
CLEAN_FILES := test.img
clean-files += test.img
clean-files := test.img

2) More generally, I'd like to be able to add some arbitrary make steps that are peculiar to my boards Makefile, but I can't figure this out either, so far.

I've tried adding my_all to extra-y and then adding steps for my_all, similar to the following.

8<---
extra-y := test.img my_all

.PHONY my_all
my_all : test1.txt

	# some arbitrary commands to be executed if test1.txt isn't present
	cp -f test.txt test1.txt
8<---

In this case, make reports an error

make[1]: *** No rule to make target board/my_board/my_all', needed by __build'. Stop.
make: *** [board/my_board] Error 2

Any help would be appreciated.

Thanks,
Jim

#3 lore raw

+Masahiro

Hi James,

Quoted 103 lines · James Chargin

I could still use some help with this from someone who really knows how the make system works.

Tom and Simon provided hints that were helpful, as I note below.

Quoted 58 lines · James Chargin

So, is no one willing to offer a hint?

Thanks,
Jim

Quoted 51 lines · James Chargin

I have a custom board in a git workspace for U-Boot 2014.07. I've copied most of this from the .../board/ti/beagle. My board directory Makefile looks like

8<---
obj-y := board.o
8<---

I'd like to add a few files to this directory that are processed during "make all" and have any newly derived files deleted during "make clean".

I've experimented with various Makefile contents but I can't get the new files processed or any newly derived files deleted. U-Boot's makefile system is quite large for my experience level and it seems I don't have enough understanding.

A new file might contain some hush commands that are to be executed from the U-Boot command line. I'd like to use "source" to process these commands. The "source" command requires that its argument be an image (I get this into memory via TFTP), so I'd like "make all" to transform the text file containing the hush commands into the image file. I'd also like "make clean" to delete the derived image file.

So, if my hush commands are in a text file called test.txt, I'd like "make all" to apply mkimage so that a test.img is generated. I'd also like "make clean" to delete test.img.

I tried various changes to my Makefile, but the most likely seeming changes are

8<---
IMG = test.img

obj-y := board.o

board.o : $(IMG)

%.img : %.txt

     $(srctree)/tools/mkimage -T script -n $* -C none -d $< $@

CLEAN_FILES += $(IMG)
CLEAN_DIRS += .
8<---

This doesn't work, nor has any other approach I've taken. mkimage is never run for "make all" and test.img doesn't get deleted if I create a fake one and run "make clean"

Could someone offer a solution, either directly, or by pointing at an existing board that does something similar?

Quoted 4 lines · Tom Rini

Off the top of my head, try throwing test.img into obj-y ?

Adding text.img to obj-y did cause the .img file to get generated, but it also added text.img to the list of files supplied to ld, causing the final u-boot link to fail

Quoted 2 lines · Simon Glass

Also you may want to add a command like cmd_img_txt (see Makefile.lib for examples). Did you need to add anything to ALL-y?

Your mention of Makefile.lib prompted my to look there for other targets I might use. I discovered extra-y and adding

extra-y := test.img

to my board's Makefile caused the correct operations.

As you suggest, I added cmd_my_mkimage, which while not actually needed, is a very nice way to have a non-verbose progress report in the make output.

Quoted 2 lines

Another option is to put this outside the U-Boot build system, and just run mkimage later.

I really want these steps to be part of the normal board make. Requiring a separate manual build step will inevitably result in that separate step being forgotten (most probably by me).

Quoted 6 lines

Is there any documentation you could point me at that might explain the way these Makefiles interact? I know most of this was derived from somewhere else (Linux kernel?) as part of the move to KConfig. But I have no experience with the kernel build system and following make's debug output is difficult, at best. Some overview of how makes are done would be quite helpful to me and maybe to other non-U-Boot-developers.

Yes it is called Kbuild. You could try this:

https://www.kernel.org/doc/Documentation/kbuild/makefiles.txt

Quoted 4 lines

Remaining problems:

Quoted 8 lines

1) I can't figure out how to clean my newly created derived .img file. I've tried each of the following four lines (one at a time), but none worked CLEAN_FILES += board/aja/helo/helo_setupdeveloper.img CLEAN_FILES += test.img
CLEAN_FILES := test.img
clean-files += test.img
clean-files := test.img

You could try adding

$(warning CLEAN_FILES is $(CLEAN_FILES))

in a few places in the Makefile.

Quoted 17 lines

2) More generally, I'd like to be able to add some arbitrary make steps that are peculiar to my boards Makefile, but I can't figure this out either, so far.

I've tried adding my_all to extra-y and then adding steps for my_all, similar to the following.

8<---
extra-y := test.img my_all

.PHONY my_all
my_all : test1.txt

        # some arbitrary commands to be executed if test1.txt isn't present
        cp -f test.txt test1.txt
8<---
Quoted 7 lines

In this case, make reports an error

make[1]: *** No rule to make target board/my_board/my_all', needed by __build'. Stop.
make: *** [board/my_board] Error 2

Any help would be appreciated.

Maybe:

targets += test1.txt

Masahiro may know about this one.

Regards,
Simon

#4 lore raw

Hi Simon,

2015-03-13 3:55 GMT+09:00 Simon Glass <[email protected]>:

Quoted 23 lines
Quoted 23 lines

2) More generally, I'd like to be able to add some arbitrary make steps that are peculiar to my boards Makefile, but I can't figure this out either, so far.

I've tried adding my_all to extra-y and then adding steps for my_all, similar to the following.

8<---
extra-y := test.img my_all

.PHONY my_all
my_all : test1.txt

        # some arbitrary commands to be executed if test1.txt isn't present
        cp -f test.txt test1.txt
8<---

In this case, make reports an error

make[1]: *** No rule to make target board/my_board/my_all', needed by __build'. Stop.
make: *** [board/my_board] Error 2

Quoted 6 lines
Quoted 1 line

Any help would be appreciated.

Maybe:

targets += test1.txt

"targets" is necessary for including ".*.cmd" files, so it has nothing to do with the error here.

Moreover, as $(extra-y) is automatically added to "targets", you need not touch "targets" in most cases.

Signature · 2 lines
Best Regards
Masahiro Yamada
#5 lore raw
In reply to James Chargin

Hi James,

2015-03-13 3:35 GMT+09:00 James Chargin <[email protected]>:

Quoted 57 lines

I could still use some help with this from someone who really knows how the make system works.

Tom and Simon provided hints that were helpful, as I note below.

Quoted 50 lines · James Chargin

So, is no one willing to offer a hint?

Thanks,
Jim

Quoted 43 lines · James Chargin

I have a custom board in a git workspace for U-Boot 2014.07. I've copied most of this from the .../board/ti/beagle. My board directory Makefile looks like

8<---
obj-y := board.o
8<---

I'd like to add a few files to this directory that are processed during "make all" and have any newly derived files deleted during "make clean".

I've experimented with various Makefile contents but I can't get the new files processed or any newly derived files deleted. U-Boot's makefile system is quite large for my experience level and it seems I don't have enough understanding.

A new file might contain some hush commands that are to be executed from the U-Boot command line. I'd like to use "source" to process these commands. The "source" command requires that its argument be an image (I get this into memory via TFTP), so I'd like "make all" to transform the text file containing the hush commands into the image file. I'd also like "make clean" to delete the derived image file.

So, if my hush commands are in a text file called test.txt, I'd like "make all" to apply mkimage so that a test.img is generated. I'd also like "make clean" to delete test.img.

I tried various changes to my Makefile, but the most likely seeming changes are

8<---
IMG = test.img

obj-y := board.o
board.o : $(IMG)

%.img : %.txt

     $(srctree)/tools/mkimage -T script -n $* -C none -d $< $@

CLEAN_FILES += $(IMG)
CLEAN_DIRS += .
8<---

I assume you put these lines into your own board/my_board/Makefile.

You cannot use CLEAN_FILES, CLEAN_DIRS in sub-directory Makefiles. They are only available@the top-level Makefile.

Instead, "clean-files" is available in sub Makefiles. but, it is redundant if you are willing to add it to extra-y because files in $(extra-y) are automatically cleaned up.

Quoted 11 lines
Quoted 6 lines
Quoted 6 lines

This doesn't work, nor has any other approach I've taken. mkimage is never run for "make all" and test.img doesn't get deleted if I create a fake one and run "make clean"

Could someone offer a solution, either directly, or by pointing at an existing board that does something similar?

Quoted 2 lines · Tom Rini
Quoted 6 lines
Quoted 2 lines

Off the top of my head, try throwing test.img into obj-y ?

Adding text.img to obj-y did cause the .img file to get generated, but it also added text.img to the list of files supplied to ld, causing the final u-boot link to fail

Right.
As you have already noticed, you should use extra-y for your purpose.

Quoted 11 lines · Simon Glass
Quoted 3 lines

Also you may want to add a command like cmd_img_txt (see Makefile.lib for examples). Did you need to add anything to ALL-y?

Your mention of Makefile.lib prompted my to look there for other targets I might use. I discovered extra-y and adding

extra-y := test.img

Yes, this is correct.

Quoted 9 lines

to my board's Makefile caused the correct operations.

As you suggest, I added cmd_my_mkimage, which while not actually needed, is a very nice way to have a non-verbose progress report in the make output.

Quoted 2 lines

Another option is to put this outside the U-Boot build system, and just run mkimage later.

Quoted 7 lines

I really want these steps to be part of the normal board make. Requiring a separate manual build step will inevitably result in that separate step being forgotten (most probably by me).

Is there any documentation you could point me at that might explain the way these Makefiles interact?

As Simon suggested, Documentation/kbuild/makefiles.txt of Linux Kernel is the best one.

Quoted 2 lines

I know most of this was derived from somewhere
else (Linux kernel?) as part of the move to KConfig. But I have no

To be precise, you should say Kbuild, not Kconfig. Kbuild and Kconfig should be considered separately.

Kbuild - build system
Kconfig - configuration system

They both originate in Linux Kernel.

U-Boot switched to Kbuild at 2014.04-rc1, and to Kconfig at 2014.10-rc1.

You mentioned you are using u-boot v2014.07.
So, you are building U-Boot with Kbuild,
but using the old, conventional configuration system (mkconfig + boards.cfg).

Your questions in this thread are all about Kbuild.

Quoted 5 lines

experience with the kernel build system and following make's debug output is difficult, at best. Some overview of how makes are done would be quite helpful to me and maybe to other non-U-Boot-developers.

Quoted 7 lines

Remaining problems:

1) I can't figure out how to clean my newly created derived .img file. I've tried each of the following four lines (one at a time), but none worked CLEAN_FILES += board/aja/helo/helo_setupdeveloper.img CLEAN_FILES += test.img
CLEAN_FILES := test.img

CLEAN_FILES is only available at the top-level Makefile.

Add
CLEAN_FILES += board/my_board/test.img
to the top-level Makefile, and it should work.

Quoted 2 lines

clean-files += test.img
clean-files := test.img

These are correct in sub-directory Makefiles in general, but unfortunately, "make clean" does not descend into board/ directory for some reason.

So, they do not work in board/*/Makefile

Quoted 16 lines

2) More generally, I'd like to be able to add some arbitrary make steps that are peculiar to my boards Makefile, but I can't figure this out either, so far.

I've tried adding my_all to extra-y and then adding steps for my_all, similar to the following.

8<---
extra-y := test.img my_all

.PHONY my_all
my_all : test1.txt

        # some arbitrary commands to be executed if test1.txt isn't present
        cp -f test.txt test1.txt
8<---
Quoted 8 lines

In this case, make reports an error

make[1]: *** No rule to make target board/my_board/my_all', needed by __build'. Stop.
make: *** [board/my_board] Error 2

Any help would be appreciated.

If you want to generate board/my_board/test1.txt from board/my_board/test.txt, the board/my_board/Makefile should look like this:

8<----

extra-y := test1.txt

$(obj)/test1.txt: $(src)/test.txt

         cp -f $< $@

8<----

If you like the log to look more nicely,
you can write like below:

8<----
extra-y := test1.txt

quiet_cmd_copy = COPY $@

      cmd_copy = cp -f $< $@

$(obj)/test1.txt: $(src)/test.txt

         $(call cmd,copy)

8<-----

Add the following to the top-level Makefile
8<----
CLEAN_FILES += board/my_board/test1.txt
8<----

I do not think you need to use PHONY target, but
if you really want use it, you can do like this.

8<----

__build: my_all

PHONY += my_all

my_all:
echo "Hello, World"
8<----

Signature · 2 lines
Best Regards
Masahiro Yamada
#6 lore raw

Dear Masahiro,

Your help has enabled me to make my board Makefile do what I want (except for the clean target, see below).

Quoted 29 lines · Masahiro Yamada

Hi James,

2015-03-13 3:35 GMT+09:00 James Chargin <[email protected]>:

Quoted 26 lines

I could still use some help with this from someone who really knows how the make system works.

Tom and Simon provided hints that were helpful, as I note below.

Quoted 19 lines · James Chargin

So, is no one willing to offer a hint?

Thanks,
Jim

Quoted 12 lines · James Chargin

I have a custom board in a git workspace for U-Boot 2014.07. I've copied most of this from the .../board/ti/beagle. My board directory Makefile looks like

8<---
obj-y := board.o
8<---

I'd like to add a few files to this directory that are processed during "make all" and have any newly derived files deleted during "make clean".

Quoted 6 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line

...

Is there any documentation you could point me at that might explain the way these Makefiles interact?

As Simon suggested, Documentation/kbuild/makefiles.txt of Linux Kernel is the best one.

This document has been very helpful. Thank you both for pointing it out.

Quoted 11 lines
Quoted 2 lines

I know most of this was derived from somewhere
else (Linux kernel?) as part of the move to KConfig. But I have no ...

To be precise, you should say Kbuild, not Kconfig. Kbuild and Kconfig should be considered separately.

Kbuild - build system
Kconfig - configuration system

They both originate in Linux Kernel.

Quoted 7 lines

U-Boot switched to Kbuild at 2014.04-rc1, and to Kconfig at 2014.10-rc1.

You mentioned you are using u-boot v2014.07.
So, you are building U-Boot with Kbuild,
but using the old, conventional configuration system (mkconfig + boards.cfg).

Your questions in this thread are all about Kbuild.

I appreciate your clear explanation here.

I have watched the Kbuild and KConfig conversion threads in the mailing list for some time. But having been previously working with U-Boot 2010.12, this is my first experience with either. It will be useful to know they are separate in this way.

Quoted 14 lines
Quoted 6 lines

Remaining problems:

1) I can't figure out how to clean my newly created derived .img file. I've tried each of the following four lines (one at a time), but none worked CLEAN_FILES += test.img
CLEAN_FILES := test.img

CLEAN_FILES is only available at the top-level Makefile.

Add
CLEAN_FILES += board/my_board/test.img
to the top-level Makefile, and it should work.

Quoted 8 lines
Quoted 2 lines

clean-files += test.img
clean-files := test.img

These are correct in sub-directory Makefiles in general, but unfortunately, "make clean" does not descend into board/ directory for some reason.

So, they do not work in board/*/Makefile

Should this be considered a bug in the build system? Should make descend into the board directory? Or, at least, should there not be a way for a board directory to indicate which of any locally generated derived objects should be cleaned up?

I hesitate to add to the top level Makefile for my specific board.

Quoted 29 lines
Quoted 16 lines

2) More generally, I'd like to be able to add some arbitrary make steps that are peculiar to my boards Makefile, but I can't figure this out either, so far.

I've tried adding my_all to extra-y and then adding steps for my_all, similar to the following.

8<---
extra-y := test.img my_all

.PHONY my_all
my_all : test1.txt

         # some arbitrary commands to be executed if test1.txt isn't present
         cp -f test.txt test1.txt
8<---
Quoted 8 lines

In this case, make reports an error

make[1]: *** No rule to make target board/my_board/my_all', needed by __build'. Stop.
make: *** [board/my_board] Error 2

Any help would be appreciated.

If you want to generate board/my_board/test1.txt from board/my_board/test.txt, the board/my_board/Makefile should look like this:

Quoted 7 lines

8<----

extra-y := test1.txt

$(obj)/test1.txt: $(src)/test.txt

          cp -f $< $@

8<----

This is actually the fix for many of my problems. Prepending $(obj) and $(src) apparently allows make to see the file dependencies as I intend.

Quoted 6 lines

...
Add the following to the top-level Makefile
8<----
CLEAN_FILES += board/my_board/test1.txt
8<----

Again, I hesitate to add to the top level Makefile.

Quoted 5 lines

I do not think you need to use PHONY target, but
if you really want use it, you can do like this.

8<----

Quoted 7 lines

__build: my_all

PHONY += my_all

my_all:
echo "Hello, World"
8<----

As you suggest, I did not use .PHONY.

This explanation might be a nice addition to the Kbuild makefile.txt.

Again, thank you very much for your attention.

Jim

Signature · 3 lines
Jim Chargin
AJA Video Systems                       [email protected]
(530) 271-3334                          http://www.aja.com
#7 lore raw

Hi James,

2015-03-14 3:08 GMT+09:00 James Chargin <[email protected]>:

Quoted 8 lines
Quoted 5 lines

These are correct in sub-directory Makefiles in general, but unfortunately, "make clean" does not descend into board/ directory for some reason.

So, they do not work in board/*/Makefile

Should this be considered a bug in the build system?

Kind of.

I hope it will be solved in a long run.

In U-Boot, ARCH, VENDOR, BOARD directories are still treated specially for some historical reason.

Board directory is selected like follows:
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)

and it has made it difficult to descend into board/ by "make clean" because "make clean" should not expect the existing .config file.

If we could completely switched to "obj-$(CONFIG_FOO)" style in the future, this problem would go away. We need more effort to achieve this.

Quoted 2 lines

Should make descend
into the board directory?

Yes.

Quoted 4 lines

Or, at least, should there not be a way for a
board directory to indicate which of any locally generated derived objects should be cleaned up?
I hesitate to add to the top level Makefile for my specific board.

Sorry, I cannot suggest a good solution now.

Signature · 2 lines
Best Regards
Masahiro Yamada
#8 lore raw
In reply to James Chargin
Quoted 46 lines · James Chargin

I have a custom board in a git workspace for U-Boot 2014.07. I've copied most of this from the .../board/ti/beagle. My board directory Makefile looks like

8<---
obj-y := board.o
8<---

I'd like to add a few files to this directory that are processed during "make all" and have any newly derived files deleted during "make clean".

I've experimented with various Makefile contents but I can't get the new files processed or any newly derived files deleted. U-Boot's makefile system is quite large for my experience level and it seems I don't have enough understanding.

A new file might contain some hush commands that are to be executed from the U-Boot command line. I'd like to use "source" to process these commands. The "source" command requires that its argument be an image (I get this into memory via TFTP), so I'd like "make all" to transform the text file containing the hush commands into the image file. I'd also like "make clean" to delete the derived image file.

So, if my hush commands are in a text file called test.txt, I'd like "make all" to apply mkimage so that a test.img is generated. I'd also like "make clean" to delete test.img.

I tried various changes to my Makefile, but the most likely seeming changes are

8<---
IMG = test.img

obj-y := board.o

board.o : $(IMG)

%.img : %.txt

	$(srctree)/tools/mkimage -T script -n $* -C none -d $< $@

CLEAN_FILES += $(IMG)
CLEAN_DIRS += .
8<---

Quoted 6 lines

This doesn't work, nor has any other approach I've taken. mkimage is never run for "make all" and test.img doesn't get deleted if I create a fake one and run "make clean"

Could someone offer a solution, either directly, or by pointing at an existing board that does something similar?

Off the top of my head, try throwing test.img into obj-y ?

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150309/989de630/attachment.sig>
#9 lore raw

Hi,

Quoted 47 lines · Tom Rini
Quoted 46 lines · James Chargin

I have a custom board in a git workspace for U-Boot 2014.07. I've copied most of this from the .../board/ti/beagle. My board directory Makefile looks like

8<---
obj-y := board.o
8<---

I'd like to add a few files to this directory that are processed during "make all" and have any newly derived files deleted during "make clean".

I've experimented with various Makefile contents but I can't get the new files processed or any newly derived files deleted. U-Boot's makefile system is quite large for my experience level and it seems I don't have enough understanding.

A new file might contain some hush commands that are to be executed from the U-Boot command line. I'd like to use "source" to process these commands. The "source" command requires that its argument be an image (I get this into memory via TFTP), so I'd like "make all" to transform the text file containing the hush commands into the image file. I'd also like "make clean" to delete the derived image file.

So, if my hush commands are in a text file called test.txt, I'd like "make all" to apply mkimage so that a test.img is generated. I'd also like "make clean" to delete test.img.

I tried various changes to my Makefile, but the most likely seeming changes are

8<---
IMG = test.img

obj-y := board.o

board.o : $(IMG)

%.img : %.txt

      $(srctree)/tools/mkimage -T script -n $* -C none -d $< $@

CLEAN_FILES += $(IMG)
CLEAN_DIRS += .
8<---

Quoted 8 lines
Quoted 6 lines

This doesn't work, nor has any other approach I've taken. mkimage is never run for "make all" and test.img doesn't get deleted if I create a fake one and run "make clean"

Could someone offer a solution, either directly, or by pointing at an existing board that does something similar?

Off the top of my head, try throwing test.img into obj-y ?

Also you may want to add a command like cmd_img_txt (see Makefile.lib for examples). Did you need to add anything to ALL-y?

Another option is to put this outside the U-Boot build system, and just run mkimage later.

Regards,
Simon