Skip to contentSkip to conversation

ASoC: tlv320aic23: remove incorrect __exit markups

PATCH Applied Dmitry Torokhov 2 participants 2 messages Mar 9, 2015

Subsystems (3)
Sound ASoC Texas Instruments audio (ASoC/HDA) drivers
lore
Share & tools
lore

Dmitry Torokhov

author
#0 lore raw

PATCH 1/1 ASoC: tlv320aic23: remove incorrect __exit markups

Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes.

Signed-off-by Dmitry Torokhov <[email protected]>
---
 sound/soc/codecs/tlv320aic23-i2c.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/codecs/tlv320aic23-i2c.c +2 -2
index f137019..78a94af 100644
@@ -31,7 +31,7 @@ static int tlv320aic23_i2c_probe(struct i2c_client *i2c,
 	return tlv320aic23_probe(&i2c->dev, regmap);
 }
 
-static int __exit tlv320aic23_i2c_remove(struct i2c_client *i2c)
+static int tlv320aic23_i2c_remove(struct i2c_client *i2c)
 {
 	snd_soc_unregister_codec(&i2c->dev);
 	return 0;

@@ -56,7 +56,7 @@ static struct i2c_driver tlv320aic23_i2c_driver = {
 		   .of_match_table = of_match_ptr(tlv320aic23_of_match),
 		   },
 	.probe = tlv320aic23_i2c_probe,
-	.remove = __exit_p(tlv320aic23_i2c_remove),
+	.remove = tlv320aic23_i2c_remove,
 	.id_table = tlv320aic23_id,
 };
Signature · 5 lines
2.2.0.rc0.207.ga3a616c


-- 
Dmitry
maintainer Applied
#1 lore raw
Quoted 5 lines · Dmitry Torokhov

Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes.

Applied, thanks.