ARM: DTS: dra7xx-clocks: Add gate clock for CLKOUT2
PATCH 1/1 ARM: DTS: dra7xx-clocks: Add gate clock for CLKOUT2
To be able to control the gate for the clkout2 clock output.
Signed-off-by Peter Ujfalusi <[email protected]>
Signed-off-by Jyri Sarha <[email protected]>
--- arch/arm/boot/dts/dra7xx-clocks.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/boot/dts/dra7xx-clocks.dtsi +8 -0
@@ -1421,6 +1421,14 @@ ti,dividers = <1>, <8>; }; + clkout2_clk: clkout2_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkoutmux2_clk_mux>; + ti,bit-shift = <8>; + reg = <0x06b0>; + }; + l3init_960m_gfclk: l3init_960m_gfclk { #clock-cells = <0>; compatible = "ti,gate-clock";
Signature · 1 line
2.3.0
PATCH 1/1 ARM: DTS: dra7xx-clocks: Add gate clock for CLKOUT2
Quoted 4 lines · Peter Ujfalusi
To be able to control the gate for the clkout2 clock output.
Signed-off-by Peter Ujfalusi <[email protected]>Signed-off-by Jyri Sarha <[email protected]>
Applying into omap-for-v4.1/dt thanks.
Tony
Quoted 26 lines
--- arch/arm/boot/dts/dra7xx-clocks.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)arch/arm/boot/dts/dra7xx-clocks.dtsi +8
-0@@ -1421,6 +1421,14 @@ ti,dividers = <1>, <8>; }; + clkout2_clk: clkout2_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkoutmux2_clk_mux>; + ti,bit-shift = <8>; + reg = <0x06b0>; + }; + l3init_960m_gfclk: l3init_960m_gfclk { #clock-cells = <0>; compatible = "ti,gate-clock";Signature · 1 line
2.3.0