Skip to contentSkip to conversation

ARM: dts: add openpandora device support

PATCH In review Marek Belisko 2 participants 5 messages Feb 27, 2015 – Mar 16, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v3 cover ARM: dts: add openpandora device support

changes from v2:
- fix missing PIN_INPUT for penirq node
- added Reviewed-by and Tested-by

changes from v1:
- add new boards to makefile in patch 2,3 (don't add them
in separate commit together), fix gpmc issues (reported by Tony Lindgren)

- fix various issues reported by Grazvydas Ignotas (drop internal pullups from pinmux as external are in place, fix gpio buttons active state ...)

This series of patches adds initial device tree support for the OpenPandora. The most important parts are working (display, keyboard, touch, charging, fuel gauge, musb port, sd/mmc ports, leds, buttons). Not yet supported are: usb host port, nubs, wifi, bluetooth, audio.

First patch add common dtsi file which is then used in 600mhz and 1ghz variants of openpandora which support is added in patches 2 and 3.

H. Nikolaus Schaller (3):
ARM: dts: omap3-pandora: add common device tree
ARM: dts: omap3-pandora: add OMAP3530 600 MHz version
ARM: dts: omap3-pandora: add DM3730 1 GHz version

 arch/arm/boot/dts/Makefile                  |   2 +
 arch/arm/boot/dts/omap3-pandora-1ghz.dts    |  70 +++
 arch/arm/boot/dts/omap3-pandora-600mhz.dts  |  65 +++
 arch/arm/boot/dts/omap3-pandora-common.dtsi | 640 ++++++++++++++++++++++++++++
 4 files changed, 777 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap3-pandora-1ghz.dts
 create mode 100644 arch/arm/boot/dts/omap3-pandora-600mhz.dts
 create mode 100644 arch/arm/boot/dts/omap3-pandora-common.dtsi
Signature · 1 line
1.9.1
#1 lore raw

PATCH v3 1/3 ARM: dts: omap3-pandora: add common device tree

From: "H. Nikolaus Schaller" <[email protected]>

This device tree allows to boot, supports the panel, framebuffer, touch screen, as well as some more peripherals. Since there is a OMAP3530 based 600 MHz variant and a DM3730 based 1 GHz variant we must include this common device tree code in one of two CPU specific device trees.

---
 arch/arm/boot/dts/omap3-pandora-common.dtsi | 640 ++++++++++++++++++++++++++++
 1 file changed, 640 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap3-pandora-common.dtsi
arch/arm/boot/dts/omap3-pandora-common.dtsi new file +640 -0
new file mode 100644
index 0000000..782ab1f
@@ -0,0 +1,640 @@
+/*
+ * Copyright (C) 2015
+ *   Nikolaus Schaller <[email protected]>
+ *
+ * Common device tree include for OpenPandora devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	cpus {
+		cpu at 0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	aliases {
+		display0 = &lcd;
+	};
+
+	tv: connector at 1 {
+		compatible = "connector-analog-tv";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+
+	gpio-leds {
+
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led at 1 {
+			label = "pandora::sd1";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* GPIO_128 */
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led at 2 {
+			label = "pandora::sd2";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* GPIO_129 */
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led at 3 {
+			label = "pandora::bluetooth";
+			gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;	/* GPIO_158 */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led at 4 {
+			label = "pandora::wifi";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;	/* GPIO_159 */
+			linux,default-trigger = "mmc2";
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+
+		up-button {
+			label = "up";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;	/* GPIO_110 */
+			gpio-key,wakeup;
+		};
+
+		down-button {
+			label = "down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;	/* GPIO_103 */
+			gpio-key,wakeup;
+		};
+
+		left-button {
+			label = "left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;	/* GPIO_96 */
+			gpio-key,wakeup;
+		};
+
+		right-button {
+			label = "right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;	/* GPIO_98 */
+			gpio-key,wakeup;
+		};
+
+		pageup-button {
+			label = "game 1";
+			linux,code = <KEY_PAGEUP>;
+			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;	/* GPIO_109 */
+			gpio-key,wakeup;
+		};
+
+		pagedown-button {
+			label = "game 3";
+			linux,code = <KEY_PAGEDOWN>;
+			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;	/* GPIO_106 */
+			gpio-key,wakeup;
+		};
+
+		home-button {
+			label = "game 4";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;	/* GPIO_101 */
+			gpio-key,wakeup;
+		};
+
+		end-button {
+			label = "game 2";
+			linux,code = <KEY_END>;
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;	/* GPIO_111 */
+			gpio-key,wakeup;
+		};
+
+		right-shift {
+			label = "l";
+			linux,code = <KEY_RIGHTSHIFT>;
+			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;	/* GPIO_102 */
+			gpio-key,wakeup;
+		};
+
+		kp-plus {
+			label = "l2";
+			linux,code = <KEY_KPPLUS>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;	/* GPIO_97 */
+			gpio-key,wakeup;
+		};
+
+		right-ctrl {
+			label = "r";
+			linux,code = <KEY_RIGHTCTRL>;
+			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;	/* GPIO_105 */
+			gpio-key,wakeup;
+		};
+
+		kp-minus {
+			label = "r2";
+			linux,code = <KEY_KPMINUS>;
+			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;	/* GPIO_107 */
+			gpio-key,wakeup;
+		};
+
+		left-ctrl {
+			label = "ctrl";
+			linux,code = <KEY_LEFTCTRL>;
+			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;	/* GPIO_104 */
+			gpio-key,wakeup;
+		};
+
+		menu {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;	/* GPIO_99 */
+			gpio-key,wakeup;
+		};
+
+		hold {
+			label = "hold";
+			linux,code = <KEY_COFFEE>;
+			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* GPIO_176 */
+			gpio-key,wakeup;
+		};
+
+		left-alt {
+			label = "alt";
+			linux,code = <KEY_LEFTALT>;
+			gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;	/* GPIO_100 */
+			gpio-key,wakeup;
+		};
+
+		lid {
+			label = "lid";
+			linux,code = <0x00>;    /* SW_LID lid shut */
+			linux,input-type = <0x05>;    /* EV_SW */
+			gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;   /* GPIO_108 */
+		};
+	};
+};
+
+&omap3_pmx_core {
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat4.sdmmc2_dirdat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat5.sdmmc2_dirdat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat6.sdmmc2_dircmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1)		/* sdmmc2_dat7.sdmmc2_clkin */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* GPIO_157 = lcd reset */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	led_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4)	/* GPIO_128 */
+			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)	/* GPIO_129 */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4)	/* GPIO_158 */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4)	/* GPIO_159 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4)	/* GPIO_96 */
+			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4)	/* GPIO_97 */
+			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4)	/* GPIO_98 */
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4)	/* GPIO_99 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4)	/* GPIO_100 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* GPIO_101 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)	/* GPIO_102 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4)	/* GPIO_103 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4)	/* GPIO_104 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4)	/* GPIO_105 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4)	/* GPIO_106 */
+			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4)	/* GPIO_107 */
+			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4)	/* GPIO_108 */
+			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)	/* GPIO_109 */
+			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4)	/* GPIO_110 */
+			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4)	/* GPIO_111 */
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)	/* GPIO_176 */
+		>;
+	};
+
+	penirq_pins: pinmux_penirq_pins {
+		pinctrl-single,pins = <
+			/* here we could enable to wakeup the cpu from suspend by a pen touch */
+			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4)	/* GPIO_94 */
+		>;
+	};
+
+};
+
+&omap3_pmx_core2 {
+	/* define in CPU specific file that includes this one
+	 * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD()
+	 */
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl at 48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_power: power {
+			compatible = "ti,twl4030-power-reset";
+			ti,use_poweroff;
+		};
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+
+			codec {
+				ti,ramp_delay_value = <3>;
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl_keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <6>;
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_9)
+		MATRIX_KEY(0, 1, KEY_8)
+		MATRIX_KEY(0, 2, KEY_I)
+		MATRIX_KEY(0, 3, KEY_J)
+		MATRIX_KEY(0, 4, KEY_N)
+		MATRIX_KEY(0, 5, KEY_M)
+		MATRIX_KEY(1, 0, KEY_0)
+		MATRIX_KEY(1, 1, KEY_7)
+		MATRIX_KEY(1, 2, KEY_U)
+		MATRIX_KEY(1, 3, KEY_H)
+		MATRIX_KEY(1, 4, KEY_B)
+		MATRIX_KEY(1, 5, KEY_SPACE)
+		MATRIX_KEY(2, 0, KEY_BACKSPACE)
+		MATRIX_KEY(2, 1, KEY_6)
+		MATRIX_KEY(2, 2, KEY_Y)
+		MATRIX_KEY(2, 3, KEY_G)
+		MATRIX_KEY(2, 4, KEY_V)
+		MATRIX_KEY(2, 5, KEY_FN)
+		MATRIX_KEY(3, 0, KEY_O)
+		MATRIX_KEY(3, 1, KEY_5)
+		MATRIX_KEY(3, 2, KEY_T)
+		MATRIX_KEY(3, 3, KEY_F)
+		MATRIX_KEY(3, 4, KEY_C)
+		MATRIX_KEY(4, 0, KEY_P)
+		MATRIX_KEY(4, 1, KEY_4)
+		MATRIX_KEY(4, 2, KEY_R)
+		MATRIX_KEY(4, 3, KEY_D)
+		MATRIX_KEY(4, 4, KEY_X)
+		MATRIX_KEY(5, 0, KEY_K)
+		MATRIX_KEY(5, 1, KEY_3)
+		MATRIX_KEY(5, 2, KEY_E)
+		MATRIX_KEY(5, 3, KEY_S)
+		MATRIX_KEY(5, 4, KEY_Z)
+		MATRIX_KEY(6, 0, KEY_L)
+		MATRIX_KEY(6, 1, KEY_2)
+		MATRIX_KEY(6, 2, KEY_W)
+		MATRIX_KEY(6, 3, KEY_A)
+		MATRIX_KEY(6, 4, KEY_RIGHTBRACE)
+		MATRIX_KEY(7, 0, KEY_ENTER)
+		MATRIX_KEY(7, 1, KEY_1)
+		MATRIX_KEY(7, 2, KEY_Q)
+		MATRIX_KEY(7, 3, KEY_LEFTSHIFT)
+		MATRIX_KEY(7, 4, KEY_LEFTBRACE )
+	 >;
+};
+
+/* backup battery charger */
+&charger {
+	ti,bb-uvolt = <3200000>;
+	ti,bb-uamp = <150>;
+};
+
+/* MMC2 */
+&vmmc2 {
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+/* LCD */
+&vaux1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+/* USB Host PHY */
+&vaux2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+/* available on expansion connector */
+&vaux3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+/* ADS7846 and nubs */
+&vaux4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+/* power audio DAC and LID sensor */
+&vsim {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	/* no clients so we should disable clock */
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	bq27500 at 55 {
+		compatible = "ti,bq27500";
+		reg = <0x55>;
+	};
+
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;	/* GPIO_126 */
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmc2>;
+	bus-width = <4>;
+	cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>;	/* GPIO_127 */
+};
+
+/* bluetooth*/
+&uart1 {
+};
+
+/* spare (expansion connector) */
+&uart2 {
+};
+
+/* console (expansion connector) */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+	nand at 0,0 {
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "sw";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */
+
+		x-loader at 0 {
+			label = "xloader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders at 80000 {
+			label = "uboot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env at 260000 {
+			label = "uboot-env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel at 280000 {
+			label = "boot";
+			reg = <0x280000 0xa00000>;
+		};
+
+		filesystem at 680000 {
+			label = "rootfs";
+			reg = <0xc80000 0>;	/* 0 = MTDPART_SIZ_FULL */
+		};
+	};
+};
+
+&mcspi1 {
+	tsc2046 at 0 {
+		reg = <0>;	/* CS0 */
+		compatible = "ti,tsc2046";
+		spi-max-frequency = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&penirq_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 0>;	/* GPIO_94 */
+		pendown-gpio = <&gpio3 30 0>;
+		vcc-supply = <&vaux4>;
+
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <8000>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4800>;
+		ti,x-plate-ohms = /bits/ 16 <40>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		linux,wakeup;
+	};
+
+	lcd: lcd at 1 {
+		reg = <1>;	/* CS1 */
+		compatible =	"omapdss,tpo,td043mtea1";
+		spi-max-frequency = <100000>;
+		spi-cpol;
+		spi-cpha;
+
+		label = "lcd";
+		reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;	/* GPIO_157 */
+		vcc-supply = <&vaux1>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+
+};
+
+/* n/a - used as GPIOs */
+&mcbsp1 {
+};
+
+/* audio DAC */
+&mcbsp2 {
+};
+
+/* bluetooth */
+&mcbsp3 {
+};
+
+/* to twl4030*/
+&mcbsp4 {
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = < &dss_dpi_pins >;
+
+	status = "ok";
+	vdds_dsi-supply = <&vpll2>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
Signature · 1 line
1.9.1
#2 lore raw

PATCH v3 2/3 ARM: dts: omap3-pandora: add OMAP3530 600 MHz version

In reply to Marek Belisko

From: "H. Nikolaus Schaller" <[email protected]>

Added Pandora Rebirth model which is based on Pandora Classic with 512 MiB DDR-333 SDRAM memory.

---
 arch/arm/boot/dts/Makefile                 |  1 +
 arch/arm/boot/dts/omap3-pandora-600mhz.dts | 65 ++++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap3-pandora-600mhz.dts
arch/arm/boot/dts/Makefile +1 -0
index 91bd5bd..eddbeee 100644
@@ -343,6 +343,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \
 	omap3-overo-storm-tobi.dtb \
 	omap3-overo-summit.dtb \
 	omap3-overo-tobi.dtb \
+	omap3-pandora-600mhz.dtb \
 	omap3-sbc-t3517.dtb \
 	omap3-sbc-t3530.dtb \
 	omap3-sbc-t3730.dtb \
arch/arm/boot/dts/omap3-pandora-600mhz.dts new file +65 -0

65 lines not on this page · raw message

Signature · 1 line
1.9.1
#3 lore raw

PATCH v3 3/3 ARM: dts: omap3-pandora: add DM3730 1 GHz version

In reply to Marek Belisko

From: "H. Nikolaus Schaller" <[email protected]>

Added Pandora 1 GHz model which is based on Classic/Rebirth with following changes:
- upgraded cpu to dm3730 runs on 1GHz
- 512 MiB DDR-333 SDRAM @ 200 MHz

---
 arch/arm/boot/dts/Makefile               |  1 +
 arch/arm/boot/dts/omap3-pandora-1ghz.dts | 70 ++++++++++++++++++++++++++++++++
 2 files changed, 71 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap3-pandora-1ghz.dts
arch/arm/boot/dts/Makefile +1 -0
index eddbeee..69f3106 100644
@@ -344,6 +344,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \
 	omap3-overo-summit.dtb \
 	omap3-overo-tobi.dtb \
 	omap3-pandora-600mhz.dtb \
+	omap3-pandora-1ghz.dtb \
 	omap3-sbc-t3517.dtb \
 	omap3-sbc-t3530.dtb \
 	omap3-sbc-t3730.dtb \
arch/arm/boot/dts/omap3-pandora-1ghz.dts new file +70 -0

70 lines not on this page · raw message

Signature · 1 line
1.9.1
#4 lore raw
In reply to Marek Belisko
Quoted 17 lines · Marek Belisko

changes from v2:
- fix missing PIN_INPUT for penirq node
- added Reviewed-by and Tested-by

changes from v1:
- add new boards to makefile in patch 2,3 (don't add them
in separate commit together), fix gpmc issues (reported by Tony Lindgren)

- fix various issues reported by Grazvydas Ignotas (drop internal pullups from pinmux as external are in place, fix gpio buttons active state ...)

This series of patches adds initial device tree support for the OpenPandora. The most important parts are working (display, keyboard, touch, charging, fuel gauge, musb port, sd/mmc ports, leds, buttons). Not yet supported are: usb host port, nubs, wifi, bluetooth, audio.

Quoted 7 lines

First patch add common dtsi file which is then used in 600mhz and 1ghz variants of openpandora which support is added in patches 2 and 3.

H. Nikolaus Schaller (3):
ARM: dts: omap3-pandora: add common device tree
ARM: dts: omap3-pandora: add OMAP3530 600 MHz version
ARM: dts: omap3-pandora: add DM3730 1 GHz version

Thanks everybody for doing this, applying into omap-for-v4.1/dt.

Regards,

Tony